A quick and easy way to remove bearings from press fit type bottom brackets with an inside diameter of 37-41 mm (BB90 BB92 Shimano Press Fit SRAM Press Fit GXP)The BBT-90 works similar to a small head cup remover to safely extract low profile bearings from inside the bottom bracket shell as the tool slides through the shell it expands behind the bearing once the tool is in place the bearing is removed by tapping on the top cap with a hammer such as the Park HMR-3The BBT-90.3 set also includes installation cups to be used in conjunction with the Park Tool HHP-1 2 or 3 Headset Cup Press to quickly and precisely press the bearings into the bottom bracket shell
This Park Tool bearing press kit is equipped with one bottom bracket bearing remover and two bushings that will assist with the fitting of new bearings (separately sold headset press tool also required to install pressfit bearing/cups). Ideally suited to removing and replacing BB30, PressFit 30 (PF30), 386EVO, BBright and PF121 systems, this pack will help you to get the job done in no time at all. An up-to-date version of Park Tool's BBT-30.3, this set gives a longer length to work with wider fat bottom bracket shells, making it a fantastic tool to add to any garage or professional bike workshop. How To Use: To remove the bearing, the remover is fed through the shell until the flat head goes into the opposite side bearing. Once engaged, the tool's plastic guide will fit into the near-side shell opening to hold the tool steady while you tap the handle end firmly with a hammer, until the bearing pops out. To install new bearings, the bundled bushings (included) are used with a headset press (not included) to quickly and accurately press the bearings into the shell.
Key Features:Designed and built to install and remove BB30 bearings,The BBT-30.4 features a bushing set used in conjunction with a head cup press to quickly and precisely press the BB30 and PF30 bearings into the bottom bracket shell,The included BB30 bearing remover works from inside the shell to easily push out bearings,Updated to also remove PressFit 30 (PF30), EVO 386, BBright-Ö and PF121,Made in the USA and covered by Park Tool's legendary limited lifetime warranty.
Park Tool Bottom Bracket Bearing Tool Set BBT-30.4Install and extract bottom bracket bearings with this Bottom Bracket Tool Set from Park Tool. This set includes everything required to easily tackle bottom bracket bearings in a range of bracket systems. Efficient Bottom Bracket Bearing RemovalComprised of a bottom bracket bearing remover and two bushings for fitting new bearings, the Bottom Bracket Bearing Tool Set BBT-30.4 is suitable for removing and replacing BB30, PressFit 30 (PF30), 386EVO, BBright and PF121 systems. To remove the bearing, the remover is fed through the shell until the flat head goes into the opposite side bearing. Once engaged, the tool's plastic guide will fit into the near-side shell opening to hold the tool steady while you tap the handle end firmly with a hammer, until the bearing pops out. To install new bearings, the bundled bushings are used with a head cup press (not included) to quickly and accurately press the bearings into the shell.This updated take on the BBT-30.3 features additional length to work with wider fat bottom bracket shells, making the Bottom Bracket Bearing Tool Set BBT-30.4 a great addition to any garage or workshop.Features: Compatibility: BB30, PressFit 30 (PF30), 386EVO, BBright and PF121 bottom bracket systems Included parts: Extra-long bottom bracket bearing remover, 2 x bushings for use with head cup press (sold separately)Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Press Fit BB Bearing Tool Set (BBT-90.3)Park Tool has established itself as the go-to brand for professional bike mechanics, and its BBT-90.3 bottom bracket fitting set is the ideal addition to any home or workshop toolbox. Compatible with a wide range of press-fit types, it’s designed to combine with Park Tool’s bearing press tool, to accurately insert or extract the bearing cups into the bike frames bottom bracket shell.Features: Compatibility: BB90, BB92, Shimano press-fit, SRAM press-fit GXP, Race Face press-fit and other press-fit bottom bracket systems Can be used with a Park Tool Bearing Press to press the bearings into the bottom bracket shellBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Park Tool BB press removes and install the bearings and bearing units used in BB86, BB92, Shimano Press Fit, SRAM Press Fit GXP, Race Face Press Fit and other press fit bottom bracket systems using the nominal 24mm spindle. The Park Tool bb tool includes a bearing removal tool, which slides through and expands behind the bearing (like a head cup remover) so it can be tapped out with a hammer. The BBT-90.3 also includes two installation bushings (#669). Use the bushing in conjunction with an HHP-2 or HHP-3 Bearing Cup Press (sold separately) to press the bearings into the frame. Click here to see the user instruction manual for this product
A precision CNC-machined aluminium tool for the installation and removal of select threaded bottom brackets with 16-notch tool fittings, including Shimano®, SRAM® GXP, Chris King®, Campagnolo®, and many others,The BBT-69.3 can also be used to remove and install 16-notch disc brake rotor lockrings,Manufactured in-house by Park Tool, anodized for easy identification and featuring a ratchet/torque wrench-compatible 3/8" drive,The BBT-69.4 features integrated threads for full compatibility with the Park Tool BBT-RS Bottom Bracket Tool Retaining System (sold separately),Fits 16-notch tool fittings with a major diameter (outside of notches) of 44-45 mm and a minor diameter (inside of notches) of 42.7 mm, including:,Shimano® BB80, BB5700, XT® BB70, BB51, and previous external bearing threaded cups,Threaded bottom bracket cups from Campagnolo®, Chris King®, FSA® MegaExo®, Hope™, SRAM®/Truvativ® GXP®, Race Face® X-type, Surly®, Wheels®, Fulcrum®, and others,16-notch Bafang® BBSH, BBS02 mid-drive motor lockrings.
Park Tool Bottom Bracket Tool BBT-69.3The Bottom Bracket Tool BBT-69.3 from Park Tool is ideal for fitting and removing a wide range of threaded bottom bracket cuts with 16-notch tool fittings.A precision CNC-machined aluminium tool for the installation and removal of select threaded bottom brackets with 16-notch tool fittings, including Shimano, SRAM GXP, Chris King, Campagnolo, and many others. Manufactured in-house by Park Tool, anodized for easy identification and featuring a ratchet/torque wrench-compatible 3/8" drive.The BBT-69.3 features integrated threads for full compatibility with the Park Tool BBT-RS Bottom Bracket Tool Retaining System (sold separately). The BBT-RS uses an adjustable spring-based tension system to apply consistent, adjustable pressure to the tool, ensuring full engagement with the tool fitting and preventing slippage.Features Fits 16-notch tool fittings with a major diameter (outside of notches) of 44-45 mm and a minor diameter (inside of notches) of 42.7 mm, Compatibility Includes: Shimano BB80, BB5700, XT BB70, BB51, and previous external bearing threaded cups Threaded bottom bracket cups from Campagnolo, Chris King, FSA, MegaExo, Hope, SRAM/Truvativ GXP, Race Face X-type, Surly, Wheels, Fulcrum, and others 3/8" drive fittingBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Bottom Bracket Tool BBT-79.3The Bottom Bracket Tool BBT-79.3 from Park Tool is a high-quality bottom bracket tool that is ideal for use with a wide range of 12-notch external cup bottom brackets.A precision CNC-machined aluminium tool for the installation and removal of select threaded bottom brackets with 12-notch tool fittings, including SRAM BSA DUB, Race Face Cinch, Rotor BSA30, and others. Manufactured in-house by Park Tool, anodized for easy identification and featuring a ratchet/torque wrench-compatible 3/8" drive.The BBT-79.3 features integrated threads for full compatibility with the Park Tool BBT-RS Bottom Bracket Tool Retaining System (sold separately). The BBT-RS uses an adjustable spring-based tension system to apply consistent, adjustable pressure to the tool, ensuring full engagement with the tool fitting and preventing slippage.Features Fits 12-notch threaded bottom bracket tool fittings with a major diameter (outside of notches) of 45-47 mm and a minor diameter (inside of notches) of 44 mm Compatibility Includes: SRAM BSA DUB; Race Face Cinch; Rotor BSA30; Zipp Vuma; Hawk Racing BB3086 and more 3/8" drive fittingBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
A precision CNC-machined aluminium tool for the installation and removal of select threaded bottom brackets with 12-notch tool fittings, including SRAM® BSA DUB®, Race Face Cinch, Rotor BSA30, and others. Manufactured in-house by Park Tool, anodized for easy identification and featuring a ratchet/torque wrench-compatible 3/8" drive. The BBT-79.3 features integrated threads for full compatibility with the Park Tool BBT-RS Bottom Bracket Tool Retaining System (sold separately). The BBT-RS uses an adjustable spring-based tension system to apply consistent, adjustable pressure to the tool, ensuring full engagement with the tool fitting and preventing slippage.
One end of the BBT-9 Park Tool bottom bracket tool securely engages the 16 notches of the bottom bracket cups, the other end engages the 8 internal splines of the crank arm adjustment cap. It also fits the rotor disc lockrings using 16 external notches. Warning: This tool has a long handle and it is possible to damage the tool or the component by over-tightening.
A highly durable metal tool to remove and install Shimano HollowTech II integrated Bottom brackets and chainsets16 Laser cut splines securely engage the notches of the bottom bracket cups, while the other end fits the 8 internal splines of the crank arm adjustment capPlastic coated handle for a secure and comfortable gripWarning: this tool has a long handle and it is possible to damage the tool or the component by over-tightening during installationRecommended torque setting for bottom bracket cups: 35 - 50 NmRecommended torque setting for crank arm adjustment cap: 0.4 - 0.7 Nm