If stubborn sprockets mean that the DJD driver cannot be adequately held to unthread the sprocket... then, this Workshop tool may be required.CNC Made from steel.Use as follows;Insert the tool securely into a bench vice.,Remove the driver body from the hub assembly.,Remove the 3 Pawls and spring.,Insert the Pawl area of the driver body into the Bench tool.,Use required chainwhip to remove the now securely held DJD driver body.,
Halo/Morningstar Spin Doctor Grease Injector tool.Specially developed by Morningstar tooling, this relatively simple tool allows long lasting grease to be pressure injected inside the bearings and pawls of the Spin Doctor freehub - without the need for complete disassembly.To Grease:Push-in the Freehub injector tool into the end of the freehub and apply grease into the tool via a grease gun, until you can see a small amount grease purging out of the backside of the freehub. Hi quality grease injection will provide long lasting lubrication.This tool can also be used to purge a contaminated freehub of old lube, water and grit.(Simply continue injecting excess grease, and the excess grease will be forced out of the back of the freehub, taking with it existing contaminants.)Note:2007 series Spin Doctor rear freehubs have genuine Finish Line TFG37 grease packed inside, plus a "lube hole" concealed under the cassette sprockets. To lube the pawls and bearings, simply remove the cassette and insert a grease gun pointed nozzle and squeeze! (Note: no need to pull-off hub end seals or use this special injector tool - but it CAN still be used if a full purge is required.)
Scatches or dings can happen when getting rad on the trails or trusting your buddy to put your bike on their car rack. This touch up paint is enough to hide those marks and keep your bike looking like new.Key Features:Get rid of those scratches,1oz Bottle with Brush Cap.,Gloss Acrylic Enamel.,Do not store above 120 degrees F.,Apply in a ventilated area while using protective gloves and eyewear.,.
Pulls cables tight when adjusting brakes and derailleurs.Features a thumb lock for single-handed operation. Specification: Material: Hardened Steel / High polymer.,Size: 8"..
The patented "Smart Cradle System" is adjustable to securely fit chains of different sizes.Features a chain hook inside the handle.Specification:Compatible with 5-12 speed; 3/32" and 1/8" single speed chains.,Material: Alloy steel (handle) / CNC machined 6061 aluminium (body) / S2 tool steel (pin).,Size: 145 x 70 x 21mm.,Weight: 215g..
The innovative spring steel automatically binds with the chain, making it easy to drive the pin out accurately and easily.Equipped with a chain hook on the side of the handle.Specification:Compatible with 8-12 speed chains.,Material: Alloy steel (handle) / High polymer (body) / Alloy steel (pin).,Size: 108 x 49 x 13mm.,Weight: 80g..
The sturdy torque and diamond heads with 25° angle entry offer easy access and promote efficiency even near obstructions, assisting in faster insertion and removal.Specification:Sizes available:,2mm: 150 x 60mm.,2.5mm: 150 x 60mm.,3mm: 150 x 60mm.,4mm: 150 x 60mm.,5mm: 200 x 75mm.,6mm: 200 x 75mm.,8mm: 200 x 78mm.,10mm: 200 x 78mm.,T25: 150 x 60mm.,.Material: SNCMV / High polymer..
Single hook/hook spanner with 3 notches / 24mm hex wrench.Specification:Material: SPHC-P.,Size: 300mm..
Double-sided design to cater for both Shimano® and SRAM® cranksets.Compatible with Shimano® Hollowtech II™ or other 8-notch crank arm caps / SRAM®, RaceFace® or other 16mm internal hex crank arm caps.Features 6mm hex holes on both sides for use with a hex wrench.Specification:Material: CNC machined 6061 aluminium..
A handy helper when working on your wheel, this specific tool keeps your spokes taught and in place to let you carry out the job with ultimate precision.A genuine Birzman workshop accessory, this high-polymer-made holder works with 1.0-2.0mm wide bladed spokes, keeping your fingers safe and spokes stiff as you get to work. Specification:Material: High polymer.,Size: 65 x 45 x 20mm..
Keeps the chain in place when the wheel is removed.Features a quick release lever.Specification:Material: Silicone / Aluminium.,Includes: 85 x 40 x 11mm..
Lockring Sockets specific to e-bikes, there are 9 lockrings availavle which correspond to the following e-bike motors: Specification: Shimano® STEPS Ø54 / Shimano® STEPS Ø39.,Bosch® Ø43 (Gen3) / Bosch® Ø50 (Gen2) / Bosch® Ø60 (Gen1).,Yamaha® PW 36mm Hex / Yamaha® PW-X Ø46.,Panasonic® Ø62.,Brose® Ø43., . The sockets are of 1/2" Dr. and are compatible with Birzman Socket and Torque Wrenches.
Head cup remover for 1-1/2" / 1-1/4" head cups. Specification: Material: CrMo. .
Adjustable fan-out dimension (Ø28.58-38.1mm).Compatible with 1 to 1½” headset cups, BB30 bearings and PF30 bearing cups. Specification: Material: CrMo.,Patent: Tawian I570011..
For use when assembling or removing masterlinks. Specification: Material: Alloy steel / High polymer., Indications: 6.5"..
The O-Ring Pick set from Birzman is designed to make the removal and placement of these often fiddly components a whole lot easier.This dual-tool set features two implements with different shaped ends, capable of placing and lifting the most awkward of O-rings when you are repairing your bike chain. Each tool has one hooked end, with an L-shaped opposite end on one and an N-shaped end on the other.Precise tools for a tricky job, the O-Ring Pick set makes this part of chain maintenance as quick and hassle-free as can be.Specification:Material: Hardened Steel / High polymer..
Specification:Functions: 1/2" Dr., Material: Alloy steel / Chrome Vanadium (bits). .
Additional insert for Birzman Crown Race Setting Tool (BM08-CRST). Specification: Material: Alloy steel. .
The Hex Key Set is fitted in an ergonomic holder, providing comfortable grip, and clear identification of the dimensions.The wrenches can be driven out with an easy rotation, while the blocking mechanism inside the holder keeps the wrenches from accidental slip-outs.Specification: Includes: 9 pcs,Functions:1.5/2/2.5/3/4/5/6/8/10mm,Material: S2 tool steel.
13 / 14 / 15 / 16 / 17 / 18 / 19 / 20 / 22mmFeatures an ergonomically designed bending angle.Specification:Material: SPHC / High polymer.,Width: 2.4mm.,Size: 240-260mm..