15mm Pedal Combo WrenchAngled head for mechanical advantage,Closed axle nut wrench,Forged steel,Limited lifetime warranty.
Part of a range of combination Headset wrenches that cover all bicycle requirementsThe Y-head design puts metal where it is needed for strength and durabilityThe laser-cut openings are a precise fit, as this operation takes place after the heat treatment processFeatures a 32 mm wrench for 1 inch Headsets, and 36 mm wrench for 1-1/8 inch Headsets
Part of a comprehensive range of freewheel removal toolsOversized centre hole and thin wall design allows use without removal of cones and locknutsInvestment cast and heat-treated for strength and durabilityOne-inch base fits end of SR-1, FRW-1 Park tools or simply an adjustable wrench or bench viceFits most four notch BMX freewheels including hubs with 14 mm oversize axles
Key Features:World famous Park Tool quality wrapped up in a combination metric wrench,Features both open and 12-point two-way ratcheting box ends,Forged from chrome vanadium steel, chrome plated, meticulously polished, then center dipped in Park Tool blue vinyl for a positive grip,Strong, comfortable, and beautiful!,Covered by Park Tools Limited Lifetime Warranty.
Key Features:5-pack of Dynaplug soft nose brass tip repair plugs with a shorter tail for use in the road Air system,Essential for the correct use of the Road air system, the longer tails of standard plugs will block the CO2 vents on the short Road Air system nozzle and prevent proper operation,Dynaplug is the fastest, easiest and all-round best way to repair a tubeless tyre mid-ride. When needed, just remove whatever caused the puncture, firmly push the novel insertion tube straight into the hole and extract the tool depositing the repair plug in the tyre, done!,The sealant-friendly repair plug is a unique viscoelastic impregnated rubber that bonds instantly and permanently with your tyre, and the nonabrasive brass tip will not scratch your rim or puncture your rim tape,No need to remove the tyre, no messy glues or solvents, just plug and ride!,If a single plug is not enough to seal a hole, just fold the -ætail-Æ flat on the tyre; hold it with your finger and stick another one in there! Add as many plugs as needed, folding each tail against the tyre as you insert plugs,A plug tail can be snipped off later if it bothers you; trim to about 4mm long depending on the location,Made with pride in the USA using patented technology.
The Wolf Tooth Pack Pliers are not only a brilliant exercise in design innovation but are precision engineered to an unrivalled standard – at once durable, functional and reliable, these are a must-have addition to your kit list if you’re touring, bikepacking or exploring untrammelled trails with a lightweight setup.Explicitly designed to fill existing gaps in the lightweight multi-tool market, these pack pliers function as a tyre lever, presta valve core remover, valve stem lock nut wrench and master link pliers.With the in-built storage space, you can carry two additional master links. Magnetised for simple closure and remarkably lean, you’ll be glad to have these out on the trails or in the wilds.Key Features:Handcrafted from 7075-T6 aluminium in the USA,Tyre lever, presta valve core remover, valve stem lock nut wrench and master link pliers,Weighs 38.5g.Compatibility:Compatible with 9, 10, 11, 12-speed master links and chains,Compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links,Not compatible with Connex Links by Wipperman,Tyre lever not recommended for use on carbon rims.
ROCKnROLL is made with special abrasion resistance and high strength CORDURA fabric. A special loop strap with protective patch at the back of roll is designed to work with GRANITE ROCKBAND carrier strap.ROCKnROLL comes with a mini Ratchet tool, extension rod, and 9-bit kit. The ratchet tool may be small in the size but tough enough to withstand 60NM at the gear. Tool bits are made with premium quality S2 alloy steel for exceptional strength and CNC-cut for precision engagement. There are 7 Hex bits (2mm/2.5mm/3mm/4mm/5mm/6mm/8mm), Star bit (T25), and Philips bit (PH2) in the kit. Additional two pockets for your spare chain Quick Link. Roll size: L130xW50xH30,Weight: 136g,Colour option: Black/Camo green.Note: Quick link is not included in the RocknRoll package
Replacement Chain Tensioner Idlers with Fittings
Key Features: Industry standard cone wrenches with unmatched performance,The Y-head design puts material where it is needed for strength and durability,Military grade phosphate finish ensures an accurate fit and consistent quality,Thin enough to be used on the narrowest of cones,High strength tool steel,Long vinyl dipped handle for leverage and comfort,Made in the USA and covered by Park Tool's legendary limited lifetime warranty.
Key Features:5-pack of Dynaplug soft nose brass tip repair plugs,Our most popular plug, suitable for almost all Dynaplug tools, except the road version of the Air system,Dynaplug is the fastest, easiest and all-round best way to repair a tubeless tyre mid-ride. When needed, just remove whatever caused the puncture, firmly push the novel insertion tube straight into the hole and extract the tool depositing the repair plug in the tyre, done!,The sealant-friendly repair plug is a unique viscoelastic impregnated rubber that bonds instantly and permanently with your tyre and the nonabrasive brass tip will not scratch your rim or puncture your rim tape,No need to remove the tyre, no messy glues or solvents, just plug and ride!,If a single plug is not enough to seal a hole, just fold the tail flat on the tyre; hold it with your finger and stick another one in there! Add as many plugs as needed, folding each tail against the tyre as you insert plugs,A plug tail can be snipped off later if it bothers you; trim to about 4mm long depending on the location,Made with pride in the USA using patented technology.
Key Features: Industry standard cone wrenches with unmatched performance,The Y-head design puts material where it is needed for strength and durability,Military grade phosphate finish ensures an accurate fit and consistent quality,Thin enough to be used on the narrowest of cones,High strength tool steel,Long vinyl dipped handle for leverage and comfort,Made in the USA and covered by Park Tool's legendary limited lifetime warranty.
Economical tool that helps remove BB30 bearings from grames. Use with a hammer and punch (not included). Weight 70g
Key Features:Socket wrench for FSA MegaEvo bottom brackets .
Key Features:The DMR solid welded pedal spanner is a heavy duty, shop quality pedal tool.,Heavy duty, shop quality pedal spanner. Laser cut chromoly head. 15mm direct line wrench opening positioned for optimal leverage. .
Shelter Wheel Kit is made of 35 washers that fit snugly over the valve stem, gluing at its base, with an elegant and almost invisible silencing effect.It's also great to balance wheels, with an additional vibration-reducing action.Key Features:Eliminates valve noises, especially on high-profile rims,Shelter washers can be used to finely balance wheels,Visco-Elastic behaviour reduced vibrations.How to silence valves:Shelter Wheel Kit is made of 35 washers that fit snugly over the valve stem, gluing at its base. With minimum bulk and weight, they provide an elegant and almost invisible silencing effect, cancelling unwanted valve movements and vibrations. The re-sealable bag makes sure washers retain their properties if needed for successive applications.Once Shelter washers are applied on the rim, it’s possible to remove the valve an re-insert it without loosing the silencing effect. This is just one application of our Shelter Wheel Kit, but there’s more.Nobody would drive a fast car whose wheels haven’t been carefully balanced after mounting tyres on.Current high performance bicycle wheels, with fancy ceramic bearings, lightweight carbon rims, cannot deliver their full potential if not properly balanced.It’s an easy task that only requires a Shelter Wheel Kit, a wheel truing stand (or a bicycle turned upside down..), patience and some minutes per wheel.Much nicer and effective than electrical tape to silence valves on high-end wheelsMuch nicer (and effective) than electrical tape to silence valves on high-end wheelsHow to balance wheels:Mount the tyre (and eventually disk) on the wheel, so that the wheel is in its rideable form.IMPORTANT: if balancing a tubeless wheel, make sure there’s very little or no liquid sealant inside (that can be added later). Liquid sealant spreads while riding without creating wheel unbalance, but it will interfere with static balancing.Place the wheel on a truing stand and make sure it can rotate freely.With a gentle push, make the wheel spin. After a few complete rotations in the direction of the push, the wheel will enter a pendulum phase where it makes partial rotations, back and forth. Behaving like a pendulum, the excess of weight on the wheel is subject to a restoring force (due to gravity) that accelerates it toward the equilibrium position. Amplitude of swings will reduce until the wheel stops: the lowest point is where the excess weight is.Often wheels stop with the valve at the lowest point… but sometimes uneven weight distribution on the tyre or less-than-accurate carbon fiber lay up overcompensate that, and the lowest point is not corresponding to the valve.Keeping the lowest point of the rim/tyre as reference, identify the opposite point on the rim (you can find it using a ruler, aligned with the lowest point and the wheel axle) and adhere a Shelter washer there.Repeat the process from #1. Each time the heaviest point may move slightly (because of friction in the hub), but it will normally remain within a +-10 cm (4 inches) range.The wheel is balanced when, upon making it turn, IT WILL STOP WITHOUT ENTERING THE PENDULUM PHASE (it won’t change its rotation sense). With each subsequent spin, the lowest point when the wheel stops is a random point on the circumference, changing every time and depending on bearing friction.Washers can be adhered one on top of the other, or side by side, on top of the rim or on its side (depending on rim profile/size).A good trick, although not always possible, is finding a spoke that’s close to the lightest point of the wheel and cutting the washer on one side, so that the washer can be put around the spoke.Each Shelter washer weights around 1 g. Typical wheel unbalance ranges from 4 to 12 grams.Visco-elasticity reduces vibrations:That’s an added bonus when balancing a wheel with Shelter washers.The transmission of vibrational energy through any structure can be reduced by introducing visco-elastic materials at discrete points. It’s exactly what Shelter does, contributing to reduce vibrations on very stiff wheels.
Key Features: The HCW-16.3 is a combination 15mm pedal wrench and chain whip,Use for both pedal removal/installation and for cassette removal,Chain whip features improved compatibility with 5 speed to 12 speed mountain and road bike cassettes and freewheels,The HCW-16.3 is 10.75" long (27.3cm).
Key Features: Two-sided spoke wrench is designed for Mavic wheel sets.,Long handle gives good leverage for stubborn spoke nipples., Fits both Mavic 5.65 mm threaded eyelets and 7 mm integrated nipples., Made in the USA and covered by Park's legendary limited lifetime warranty.,
Small and handy, a 3.65 metre retracting tape measure with both Metric and Imperial measurement readings, all inside a tough composite housing.
Designed to cut new threads on fork steerers, or clean up existing threadsExpandable cutting dies are made from the highest quality high speed steel, to ensure a precision cut and a long lifeThe thread guide system allows the metal shavings produced to fall through the guide, preventing damage to the threadsIncludes a 1 inch x 24 tpi cutting die, and a 1 inch cutting guide1-1/8 inch x 26 die, 1-1/4 inch x 26 die, 1-1/8 inch guide, and 1-1/4 inch guide are also available, and will fit the same handle
Key Features: A versatile and convenient way to keep tools, supplies and technology at arms length on a PRS-33 or PRS-33.2 Power Lift Repair Stand,The PRS-33TT solidly mounts directly to either side of the stand's upright at any height,Features: 19 tool holding holes, slots and small trays in a variety of shapes and sizes,14 (35cm) magnetic tool bar,Integrated mounting holes for PTH-1 Paper Towel Holder,Phone/tablet/clipboard holder,Pen and pencil holders,Adjustable utility hook to hang wheels, parts and scales,Height adjustable,Can be installed on a fully assembled stand.