Fizik Cyrano R3 Road HandlebarRidden to success by multiple UCI World Tour teams, the Cyrano R3 bar is made from top-end Ergal aluminium, making it both light and strong. Fizik used this material to ensure this bar delivers pinpoint handling and efficient power transfer through reduced flexing when you’re sprinting or climbing. Just as your choice of Fizik Spine Concept saddle shape is guided by your degree of spinal flexibility and subsequent pelvic rotation, Fizik offers this same Spine Concept guideline to help you choose your most comfortable road handlebar shape.The application of The Spine Concept to handlebar shape is the result of Fizik's research with riders of 3 UCI World Tour Teams that were riding Fizik saddles. A correlation was found between the saddle shape each rider was using and the handlebar shape they were riding.Features: Material: Ergal 7075-T6 Aluminium Stem Clamp Diameter: 31.8mm Flare of Drops: 38 and 40cm Widths: 2°; 44 and 46mm Widths: 3° Lever Compatibility: Standard 23.8mm clamp size Compatible with GPS Mounts: Yes Clip-on Aerobar Compatible: Yes Internal Cable Routing: No Graphics on both sides to mark where levers should be placed and where to finish wrapping bar tape Width measured centre to centre Weight: 245g (size 42cm) Handlebar Options:Your shoulders’ width should determine your handlebar width. Choose from the following centre to centre measurements: 40/42/44/46cm. The Snake Handlebar: If you are very spinally flexible (far less than 90 degrees between your straight legs and your back when bending over as far as you can, keeping your legs straight a shoulders’ width apart), you are a Snake. You are better able to reach further and get down lower to use the full radius of more rounded, classic-style, deeper-drop handlebars. You will prefer the Snake Handlebar because it has a longer reach and deeper, classic-style drop The Chameleon Handlebar: If you have an intermediate degree of spinal flexibility (approximately 90 degrees between your straight legs and your back when bending over as far as you can, keeping your legs straight a shoulders’ width apart), you are a chameleon. You are better able to reach further, but perhaps you can’t get down quite as low on the handlebar drops as a Snake would be able to. You will prefer the Chameleon Handlebar because it has a longer reach but a shallower, more ergonomic-style drop The Bull Handlebar: If you have a relatively low degree of spinal flexibility (more than 90 degrees between your straight legs and back when bending over as far as you can, keeping your legs straight a shoulders’ width apart), you are a Bull. You will not be able to reach as far or bend as low as a Snake or a Chameleon would be able to. You will prefer the Bull Handlebar because it has a shorter reach and a shallower, more ergonomic-style handlebar dropBuy Fizik Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fizik Cyrano R3 Road HandlebarRidden to success by multiple UCI World Tour teams, the Cyrano R3 bar is made from top-end Ergal aluminium, making it both light and strong. Fizik used this material to ensure this bar delivers pinpoint handling and efficient power transfer through reduced flexing when you’re sprinting or climbing. Just as your choice of Fizik Spine Concept saddle shape is guided by your degree of spinal flexibility and subsequent pelvic rotation, Fizik offers this same Spine Concept guideline to help you choose your most comfortable road handlebar shape.The application of The Spine Concept to handlebar shape is the result of Fizik's research with riders of 3 UCI World Tour Teams that were riding Fizik saddles. A correlation was found between the saddle shape each rider was using and the handlebar shape they were riding.Features: Material: Ergal 7075-T6 Aluminium Stem Clamp Diameter: 31.8mm Flare of Drops: 38 and 40cm Widths: 2°; 44 and 46mm Widths: 3° Lever Compatibility: Standard 23.8mm clamp size Compatible with GPS Mounts: Yes Clip-on Aerobar Compatible: Yes Internal Cable Routing: No Graphics on both sides to mark where levers should be placed and where to finish wrapping bar tape Width measured centre to centre Weight: 245g (size 42cm) Handlebar Options:Your shoulders’ width should determine your handlebar width. Choose from the following centre to centre measurements: 40/42/44/46cm. The Snake Handlebar: If you are very spinally flexible (far less than 90 degrees between your straight legs and your back when bending over as far as you can, keeping your legs straight a shoulders’ width apart), you are a Snake. You are better able to reach further and get down lower to use the full radius of more rounded, classic-style, deeper-drop handlebars. You will prefer the Snake Handlebar because it has a longer reach and deeper, classic-style drop The Chameleon Handlebar: If you have an intermediate degree of spinal flexibility (approximately 90 degrees between your straight legs and your back when bending over as far as you can, keeping your legs straight a shoulders’ width apart), you are a chameleon. You are better able to reach further, but perhaps you can’t get down quite as low on the handlebar drops as a Snake would be able to. You will prefer the Chameleon Handlebar because it has a longer reach but a shallower, more ergonomic-style drop The Bull Handlebar: If you have a relatively low degree of spinal flexibility (more than 90 degrees between your straight legs and back when bending over as far as you can, keeping your legs straight a shoulders’ width apart), you are a Bull. You will not be able to reach as far or bend as low as a Snake or a Chameleon would be able to. You will prefer the Bull Handlebar because it has a shorter reach and a shallower, more ergonomic-style handlebar dropBuy Fizik Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fizik Cyrano R3 Road HandlebarRidden to success by multiple UCI World Tour teams, the Cyrano R3 bar is made from top-end Ergal aluminium, making it both light and strong. Fizik used this material to ensure this bar delivers pinpoint handling and efficient power transfer through reduced flexing when you’re sprinting or climbing. Just as your choice of Fizik Spine Concept saddle shape is guided by your degree of spinal flexibility and subsequent pelvic rotation, Fizik offers this same Spine Concept guideline to help you choose your most comfortable road handlebar shape.The application of The Spine Concept to handlebar shape is the result of Fizik's research with riders of 3 UCI World Tour Teams that were riding Fizik saddles. A correlation was found between the saddle shape each rider was using and the handlebar shape they were riding.Features: Material: Ergal 7075-T6 Aluminium Stem Clamp Diameter: 31.8mm Flare of Drops: 38 and 40cm Widths: 2°; 44 and 46mm Widths: 3° Lever Compatibility: Standard 23.8mm clamp size Compatible with GPS Mounts: Yes Clip-on Aerobar Compatible: Yes Internal Cable Routing: No Graphics on both sides to mark where levers should be placed and where to finish wrapping bar tape Width measured centre to centre Weight: 245g (size 42cm) Handlebar Options:Your shoulders’ width should determine your handlebar width. Choose from the following centre to centre measurements: 40/42/44/46cm. The Snake Handlebar: If you are very spinally flexible (far less than 90 degrees between your straight legs and your back when bending over as far as you can, keeping your legs straight a shoulders’ width apart), you are a Snake. You are better able to reach further and get down lower to use the full radius of more rounded, classic-style, deeper-drop handlebars. You will prefer the Snake Handlebar because it has a longer reach and deeper, classic-style drop The Chameleon Handlebar: If you have an intermediate degree of spinal flexibility (approximately 90 degrees between your straight legs and your back when bending over as far as you can, keeping your legs straight a shoulders’ width apart), you are a chameleon. You are better able to reach further, but perhaps you can’t get down quite as low on the handlebar drops as a Snake would be able to. You will prefer the Chameleon Handlebar because it has a longer reach but a shallower, more ergonomic-style drop The Bull Handlebar: If you have a relatively low degree of spinal flexibility (more than 90 degrees between your straight legs and back when bending over as far as you can, keeping your legs straight a shoulders’ width apart), you are a Bull. You will not be able to reach as far or bend as low as a Snake or a Chameleon would be able to. You will prefer the Bull Handlebar because it has a shorter reach and a shallower, more ergonomic-style handlebar dropBuy Fizik Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Spank Spike 800 Race Riser BarsOffering World Cup quality performance at a price that won't break the bank, the Spank Spike 800 Race Riser Bars are now in their 6th generation. Spank developed this riser bar along with some of the World's top DH (downhill) and Enduro professionals and utilised a unique combination of Super-6™ aluminium, Spank’s patented CNC bending, and their Dual-Extreme-Gradual Taper (XGT) technology.Performance Optimised Race BarThe result of this collaboration and advanced construction has resulted in a handlebar that is stronger, safer and performance optimised. The Spank Spike 800 Race has an ideal geometry for control and low weight, making it perfect for aggressive All Mountain, Enduro or Downhill Racing.Features:Material: Super Six MGR Aluminium with CNC bendingFinish: Shotpeen anodised, decal logosDual XGT taper technology with impact endsDiameter: 31.8mmUpsweep: 4°Backsweep: 8°Length: 800mm (can be cut to 740mm)Usage: Enduro, FreerideWeight: From 300g (15mm rise version)Technologies:Dual XGT (Extreme Gradual Taper) Technology: This is a proprietary tube drawing process that tapers the bars from the thickest area at the bar clamping zone, slowly and gradually through the bend zones, to the thinnest areas at the control zones and back to thicker reinforced bar end zones, or “Impact Ends”. Spank has utilized FEA (Finite Element Analysis), laboratory, and rigorous real-world testing to optimise the spread of material to where it is needed to withstand the specific forces at work in each zone while offering better protection against crashes than ever before! The extreme precision enabled by Dual XGT drawing processes also eliminates the need for heavy hand grinding, which can result in imperfections and inconsistency in wall thickness.Impact Ends: The Impact Ends reduce the chance of collapse in areas where the wall is thinner and in heavy impacts. These can also be used to support bar ends in the relevant disciplinesCNC Bending: The precision of 3D CNC Bending in a single fixture allows Spank to optimise their designs further and to eliminate the heavy grinding process, making their bars lighter, stronger, and safer! Spank has also taken extra work hardening steps to ensure the stem clamping area of the bar is uniformly cylindrical and true, and as tough as possibleSuper-6 Aluminium: This is a specially blended, highly magnesium-silicon enriched, work-hardened alloy. Super-6 offers the perfect mix of hardness, yield, fatigue life, and a superior ultimate tensile strength to standard 6 series alloys. It is ideal for the creation of thin-walled, super-stiff handlebars. Through recent adoption of Super-6 materials, Spank’s Spike, Subrosa, and Oozy handlebars are now stronger and show greater resistance to deformation than ever before!Buy Spank Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Spank Spike 800 Race Riser BarsOffering World Cup quality performance at a price that won't break the bank, the Spank Spike 800 Race Riser Bars are now in their 6th generation. Spank developed this riser bar along with some of the World's top DH (downhill) and Enduro professionals and utilised a unique combination of Super-6™ aluminium, Spank’s patented CNC bending, and their Dual-Extreme-Gradual Taper (XGT) technology.Performance Optimised Race BarThe result of this collaboration and advanced construction has resulted in a handlebar that is stronger, safer and performance optimised. The Spank Spike 800 Race has an ideal geometry for control and low weight, making it perfect for aggressive All Mountain, Enduro or Downhill Racing.Features:Material: Super Six MGR Aluminium with CNC bendingFinish: Shotpeen anodised, decal logosDual XGT taper technology with impact endsDiameter: 31.8mmUpsweep: 4°Backsweep: 8°Length: 800mm (can be cut to 740mm)Usage: Enduro, FreerideWeight: From 300g (15mm rise version)Technologies:Dual XGT (Extreme Gradual Taper) Technology: This is a proprietary tube drawing process that tapers the bars from the thickest area at the bar clamping zone, slowly and gradually through the bend zones, to the thinnest areas at the control zones and back to thicker reinforced bar end zones, or “Impact Ends”. Spank has utilized FEA (Finite Element Analysis), laboratory, and rigorous real-world testing to optimise the spread of material to where it is needed to withstand the specific forces at work in each zone while offering better protection against crashes than ever before! The extreme precision enabled by Dual XGT drawing processes also eliminates the need for heavy hand grinding, which can result in imperfections and inconsistency in wall thickness.Impact Ends: The Impact Ends reduce the chance of collapse in areas where the wall is thinner and in heavy impacts. These can also be used to support bar ends in the relevant disciplinesCNC Bending: The precision of 3D CNC Bending in a single fixture allows Spank to optimise their designs further and to eliminate the heavy grinding process, making their bars lighter, stronger, and safer! Spank has also taken extra work hardening steps to ensure the stem clamping area of the bar is uniformly cylindrical and true, and as tough as possibleSuper-6 Aluminium: This is a specially blended, highly magnesium-silicon enriched, work-hardened alloy. Super-6 offers the perfect mix of hardness, yield, fatigue life, and a superior ultimate tensile strength to standard 6 series alloys. It is ideal for the creation of thin-walled, super-stiff handlebars. Through recent adoption of Super-6 materials, Spank’s Spike, Subrosa, and Oozy handlebars are now stronger and show greater resistance to deformation than ever before!Buy Spank Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Spank Spike 800 Riser HandlebarsThese hard-wearing Riser Handlebars have been designed with Downhill (DH) riding in mind. Benefiting from a durable alloy construction for a sturdy and responsive handlebar that offers enhanced manoeuvrability. Incredibly versatile, it features cut marks so you can adjust it to 740mm and is finished off with shotpeen anodised finish and Spank decal logos.Features:Material: Magnesium Super Six AlloyDiameter: 31.8mmLength: 800mm (adjustable to 740mm)Upsweep: 4 degreesBacksweep: 8 degreesFinish: Shotpeen anodised, decal logosRise: 15mm; 30mm; 50mmWeight: 340g (15mm); 350g (30mm); 360g (50mm)Buy Spank Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Spank Spoon 35 Riser BarThis MTB riser bar features a rock-solid alloy construction, which makes it ideal at handling all the intensity that's associated with all-day epics in the mountains. Spank has also kitted out this trail-ready handlebar with a shot-peened and anodised finish, which means that you'll enjoy its extra layer of durability and corrosion resistance. This makes it a perfect choice of upgrade for riders who don't let the elements to stand in their way.Freeride inspired all mountain suitable geometry makes the bar extremely versatile.Rock solid in the park or on the trail.Cost effective upgrade to your cockpit without sacrificing quality.Shot-peening and anodizing enhances fatigue life even further.Features: Material: Alloy Finish: Shot-peened and anodised Use: MTB Type: Riser Width: 800mm Diameter: 35mmBuy Spank Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Spank Spoon 800 Skyscraper Riser HandlebarDesigned with mountain bike (MTB) riding in mind, the Skyscraper Riser Handlebar from Spank is ready for whatever challenge you meet on the trail. Benefiting from a hard-wearing shot-peened and anodised finish, for added protection against rough terrain and corrosion, this handlebar ticks all the boxes for riders who like to get rough and rowdy. Features:Material: AlloyFinish: Shot-peened and anodisedUse: MTBType: RiserWidth: 800mmDiameter: 31.8mmWeight: 395g (25mm), 400g (40mm) and 420g (60mm)Buy Spank Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Spank Spoon 800 Skyscraper Riser HandlebarDesigned with mountain bike (MTB) riding in mind, the Skyscraper Riser Handlebar from Spank is ready for whatever challenge you meet on the trail. Benefiting from a hard-wearing shot-peened and anodised finish, for added protection against rough terrain and corrosion, this handlebar ticks all the boxes for riders who like to get rough and rowdy. Features:Material: AlloyFinish: Shot-peened and anodisedUse: MTBType: RiserWidth: 800mmDiameter: 31.8mmWeight: 395g (25mm), 400g (40mm) and 420g (60mm)Buy Spank Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Spank Spoon 800 Skyscraper Riser HandlebarDesigned with mountain bike (MTB) riding in mind, the Skyscraper Riser Handlebar from Spank is ready for whatever challenge you meet on the trail. Benefiting from a hard-wearing shot-peened and anodised finish, for added protection against rough terrain and corrosion, this handlebar ticks all the boxes for riders who like to get rough and rowdy. Features:Material: AlloyFinish: Shot-peened and anodisedUse: MTBType: RiserWidth: 800mmDiameter: 31.8mmWeight: 395g (25mm), 400g (40mm) and 420g (60mm)Buy Spank Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Giant Contact Ski Type Bar Extensions fit the Giant Connect SL and Contact Clip-On Bar Clamps to provde you with an aerodynamic riding position for triathlon and time trials. Featuring lightweight alloy construction.FEATURES- Fits Giant Connect SL Clip-On Bar Clamp- Fits Giant Contact Clip-On Bar Clamp- Lightweight alloy construction
Giant Contact Ski Type Bar Extensions fit the Giant Connect SL and Contact Clip-On Bar Clamps to provde you with an aerodynamic riding position for triathlon and time trials. Featuring lightweight alloy construction.FEATURES- Fits Giant Connect SL Clip-On Bar Clamp- Fits Giant Contact Clip-On Bar Clamp- Lightweight alloy construction