Fox Suspension 38 Float Performance Grip ForkPart of Fox Suspension's Performance Series, this enduro fork features a high-quality anodised finish on its upper tubes for extra durability as well as protection against corrosion during wet riding conditions. Another highlight is it comes equipped with a Float EVOL air spring and a GRIP damper with three-position on-the-fly adjustability. This makes it simple to dial in your favourite settings, so your suspension matches your riding style as well as the terrain conditions. Also benefitting from Boost axle spacing for increased stiffness and strength, plus many of the brand's finest technologies, this model is ready for hard-hitting enduro rides.Enduro Fork with Float EVOL Air SpringEVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL's linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders (push-button bleeders available separately), which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference.FIT GRIP DamperInspired from moto, the GRIP damper uses Fox Suspensions FIT sealed cartridge technology combined with a coil-sprung, independent floating piston. GRIP allows excess oil to purge through specially designed ports at the top of the damper to maintain consistent damping and increase durability. Packing the same revolutionary features as the 36 model while redefining what you think a long travel single crown fork is capable of, the Fox Suspension 38 Float Performance Grip Fork sets a new benchmark for confidence, performance, and durability. Features: Upper Tubes Finish: Anodised Use: Enduro Axle Size: 15QRx110mm Boost Steerer Diameter: 1.5" tapered Air Spring: Float EVOL Damper: GRIP (3-position on-the-fly adjustability) Adjustments: Compression damping positions Open, Medium, Firm; Additional micro-adjust between settings Detents; Low-speed rebound Travel: 170mm Rake: 44mm Compatible Rotor Size: 180mm direct Post Mount, up to 230mm compatible Starting Weight: 2180gTechnologies: Performance Series: Performance Series forks retain the same black anodized 7000 series aluminium upper tubes as Performance Elite, except paired with a GRIP damper. Push-button bleeders are not included but can be purchased separately. Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional micro-adjust between settings Detents. Low-speed rebound 10 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork's wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork's travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don't want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. Elliptical Steerer: The 38's elliptical steer tube is one of many ways we've further optimized stiffness-to-weight, placing more material only where it is needed, and eliminating every ounce of it where it's not. 58mm crown diameter to match modern frame shape profiles. Optional mudguard with sturdy and seamless 4-point direct-mount attachment protects upper tubes and dust wipers from dirt and debris (available separately). 31% stiffer transverse shear, 9% stiffer fore/aft and 20% torsionally stiffer than the 36 model.Manufacturer's Part Numbers: 910-21-029 Black 27.5" QR110 170mm 44mm 910-21-021 Black 29" QR110 170mm 44mmBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The new SID SL Ultimate is built purely to cater for the world's fastest cross country racers and bikes, with an all-new, lightweight, 32mm chassis and all new Race Day Charger damper. This is a fork designed to be fast! All new, lightweight 32mm chassis is incredibly light New Race Day Charger damper is RockShox's lightest ever Redesigned DebonAir spring for increased confidence and control Ultra-low friction SKF seals and Maxima Plush fluid reduces friction and improves performance Designed for 29 inch wheels with 100mm travel, 44mm offset and 15x110mm boost axle spacing The SID has always been RockShox's lightest fork and the new SID SL takes things a step further, with an all new, lightweight chassis that drops weight without sacrificing strength and stiffness. The SID SL Ultimate features RockShox's new Race Day Charger damper, which is their lightest ever damper while offering the same proven performance the Charger damper series is known for. Further improving comfort and control is the redesigned DebonAir spring, which gives a super plush, controlled ride, while new ultra-low friction SKF wiper seals and Maxima Plush damping fluid reduce friction and silence damper noise, giving you a quiet, smooth ride. The SID SL Ultimate is designed around 29 inch wheels only and comes with 100mm travel, perfect for lightweight cross country bikes. The SID SL has a short 44mm offset with Boost axle spacing to suit the latest bikes and wheels. If you want the lightest and best performing cross country fork around, the new RockShox SID SL Ultimate should be at the top of your list!
Fox Suspension 36 Float Perf E-Optimized Grip ForkThis electric mountain bike (E-MTB) suspension fork is built to perform everywhere from big backcountry routes to the EWS circuit. No stranger to winning awards, accolades and Enduro World Series (EWS) races, it features a new design inside-and-out and it's part of Fox Suspension's Performance Series which includes an anodised finish on its upper tubes for extra protection against wear and corrosion. It's also equipped with Boost axle spacing for additional stiffness, making it ideal for modern enduro riding. Coming complete with a Float EVOL air spring and a GRIP damper with three-position on-the-fly adjustability, this E-bike-ready fork provides a wide range of customisation, so you can benefit from a more rider-tuned feel.E-MTB Fork with FIT GRIP DamperInspired from moto, the GRIP damper uses Fox Suspension's FIT sealed cartridge technology combined with a coil-sprung, independent floating piston. GRIP allows excess oil to purge through specially designed ports at the top of the damper to maintain consistent damping and increase durability.Float EVOL Air SpringEVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL's linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders (push-button bleeders available separately, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference.Features: Upper Tubes Finish: Anodised Use: Electric Mountain Bike (E-MTB) Axle Size: 15QRx110mm Boost Steerer Diameter: 1.5" tapered Air Spring: Float EVOL Damper: GRIP (Three position on-the-fly adjustability) Travel: 160mm Brake Rotor Compatibility: 180mm direct Post Mount, up to 230mm compatibleTechnologies: Performance Series: Performance Series forks retain the same black anodized 7000 series aluminum upper tubes as Performance Elite, except paired with a GRIP damper. Push-button bleeders are not included but can be purchased separately. Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional micro-adjust between settings Detents. Low-speed rebound 10 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork's wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork's travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don't want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. Increased crown diameter to match modern frame shape profiles. Optional mudguard with sturdy 4-point direct-mount attachment protects upper tubes and dust wipers from dirt and debris. (available separately).Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Shimano Ultegra RS700 C30 TL Road WheelsetCarefully engineered by Shimano to deliver responsive handling and direct rider to road power transfer, the Ultegra RS700 C30 TL Road Wheelset is an ideal choice for demanding cyclists. Rolling on a carbon fibre rim with an alloy braking surface, it brings you efficient acceleration and a low overall weight. A front and rear specific rim height profile give you the ideal balance of crosswind stability and rigidity.Road Wheels with Sealed HubsThe hubs feature high-quality contact seals combined with cup and cone bearings that provide smooth rolling and consistent performance. The rear wheel features Shimano OPTBAL 2:1 spoke lacing, where the drive side has twice as many spokes as the non-drive side. This 2:1 spoke lacing increases stiffness and rigidity, and is especially noticeable when putting the power down.Features: Material: Rims: Carbon; Braking Surface: Aluminium; Hubs: Alloy; Spokes: Stainless Steel; Freehub Body: Steel; Nipples: Aluminium Tyre Type: Clincher Tubeless Ready: Yes Rim Profile: Front: 24mm; Rear: 28mm Rim External Width: 20.8mm Rim Internal Width: 15mm Braking System: Rim brake Axle Compatibility: Quick Release Spoke Type: Straightpull, double butted, aero Spoke Count: Front: 16 (radial); Rear: 21 (crossed) Minimum Valve Length: 40mm Weight: 1.56kgBuy Shimano Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
ENVE Gravel/CX Disc Fork Fork is a purpose-built carbon fibre fork for gravel and cyclocross applications featuring internal hose routing, flat mount brake compatibility, and clearance for up to 50mm tires. Perfect for gravel riders looking for more clearance, weight savings, compliance and the versatility of mudguard mounts. This fork will really enhance your gravel grinding experience. ENVE as gravel riders and partners of the custom frame builder community was able to identify the technical improvements needed in a full-carbon gravel fork to meet the needs of the modern gravel rider and the bicycle frames they are riding. As the industry’s leading fork manufacturers, ENVE have delivered a new gravel standard for compliance, weight savings, strength, and reliability for demanding rides over any surface. Enve G-Series Gravel Fork Material: Carbon Fiber, Weight: 520g, Steerer Tube Length: 350mm, Axle to Crown: 395mm, Brake: Disc, Axle Compatibility: 12mm Thru Axle (supplied), Max Tyre Clearence: 700c x 50c, 27.5" x 2.25", Crown Race Diameter: 1 1/2" (1.5), Torque Spec: Steerer Tube: 5.5Nm, Torque Spec: Axle: 8Nm, .
◌Marzocchi Bomber Z1 Coil Mountain Bike ForksThis Mountain Bike Fork from Marzocchi features a tried and tested modern 36mm chassis, ideal for withstanding all the challenges from tough mountain bike (MTB) trails. Benefiting from Marzocchi's GRIP damper, it replaces the air-spring with a highly advanced coil system, for a lightweight spring that's made from tempered silicon Chromoly (CrMo) for exceptional durability and control, no matter what the terrain brings.Adjustable MTB Coil ForkReady for fast-paced adventures, this MTB fork is kitted out with an adjustment noise reduction system. This allows you to benefit from almost silent operation and external preload adjustment, which enables you to fine-tune the sag and suspension firmness. Compression and rebound can also be fine-tuned to set the fork up to suit your riding preferences and the trail conditions. One final highlight is the Marzochhi Bomber Z1 Coil Fork allows for alternative spring weights or inner spacers to be installed. This means you can customise its travel and performance even further.Features:Use: MTBFork Material: AluminiumFork Travel: 170mmChassis: 36mmAxle Included: YesAxle Type: 15 Quick Release x 110Damping: GRIP (compression + rebound)Lockout: YesOffset: 44mmSpring: Tempered Silicone-Chromium SteelSteerer: 1.5" tapered AluminiumStanchions: 36mm black AnodisedRake: 44mmWeight: 2.525g (starting weight complete fork)Manufacturer Part Numbers:Black 29", Travel 170mm: MAZ-912-01-091Black 29", Travel 160mm: MAZ-912-01-096Black 27.5", Travel 180mm: MAZ-912-01-099Black 27.5", Travel 170mm: MAZ-912-01-100Red 27.5", Travel 180mm: MAZ-912-01-101Red 29", Travel 170mm: MAZ-912-01-097Buy Marzocchi Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension 34 Float AWL ForkEngineered for modern electric mountain bike (E-MTB) riding, this suspension fork features anodised upper tubes for an excellent balance of strength and durability as well as extra protection against corrosion during wetter rides. Its combination of a lightweight Float EVOL air spring and a RAIL damper smoothen out your ride, so you can stay in full control as you conquer your way from trail to trail. Benefitting from Boost axle spacing and 160mm to 230mm disc brake rotor compatibility, this model is designed prepared for fast and fun adventures, wherever your next ride takes you.AWL: Adventure Without LimitsDesigned to bring highly evolved, broadly tuneable, super capable, ultra-reliable suspension to the cycling SUV market. Whether you are racing the clock to fit in another lap, or riding further than you have ever before, AWL suspension is here to make every ride limitless.Race PedigreeLeveraging FOX's extensive experience with building the world's highest-performance off-road suspension systems, the AWL fork is based around the acclaimed FOX 34 chassis. Featuring lightweight but stiff 34mm stanchions and a precision cast magnesium lower, the AWL tracks precisely without any unwanted flex and ensures optimal long-term performance, regardless of the weather and dirt you plough through. Performance and adjustability are paramount thanks to our infinitely tuneable EVOL air spring and proven Rail damper. Externally adjustable rebound and compression damping are tool-free and easily accessible, while the Rail's sealed damper system delivers exceptional performance, bomber reliability, and hassle-free maintenance.Everyday Adventure ReadyAWL's stout chassis is available in both 27.5” and 29” wheel sizes and is rigorously tested to withstand a 169kg total weight rating. Fender, rack and light mounts are integrated into the fork for optimal compatibility, durability and versatility. Adverse conditions, rocks and roots will no longer harm your zip tied fenders. The AWL also comes with a special mount for a soon to be available, next level safety feature. Designed to handle whatever you load it up with and track smoothly and precisely across whatever terrain you point it at, the AWL can unlock your bike's electric potential, open up new landscapes, and bring adventure to your everyday ride.Features: Upper Tubes Finish: Anodised Use: Electric Mountain Bike (E-MTB) Axle Size: 15QRx110mm, Boost Steerer Diameter: 1.5" tapered Air Spring: Float EVOL Damper: RAIL Brake Rotor Compatibility: 160mm direct Post Mount, Up to 230mm compatible Max Tyre Size: 2.8" (2.6" with a fender)Technologies: E-SUV Optimised: The explosion of electric assist technology has radically altered the cycling landscape. Not only are dedicated mountain bikers exploring new terrain and carrying more momentum over bigger obstacles, but capabilities across the entire e-cycling continuum have ramped up massively. This has put a whole new set of performance - and safety - demands on bikes and their components. People are riding farther, faster, and hauling more gear across more varied terrain than ever before and they need proven, high-performance suspension that can handle this new range of needs. RAIL Damper: RAIL damper is a simplified version of Fox Suspension's renowned GRIP damper. It offers an unmatched ride feel combined with bombproof durability and easy-to-use on-the-fly adjustment ranging from wide open to fully locked out.Manufacturer's Part Numbers: 910-20-210 Black 29" QR110 100mm 51mm 910-21-045 Black 29" QR110 140mm 51mm 910-20-211 Black 27.5" QR110 120mm 44mmBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Campagnolo Zonda C17 Disc Road WheelsetThe Zonda C17 Disc Road Wheelset from Campagnolo is their most premium model and benefits from a lightweight and durable construction for race-ready high-performance you can count on. Reliability, Performance, Integrity & SafetyThough the wheelset has been developed at a time where there are plenty of options for road disc wheelsets in the market, there is a lack of options offering the level of reliability, integrity, performance and safety associated with Campagnolo wheels.Respected in MarketplaceThe Zonda™ is exceptionally well respected in the marketplace and performs over and above its competitors. The Zonda™ disc is more reactive than the rim brake version and 25g lighter than its closest competitor.Wheelset Includes:User manual“Quick Release” wheel locks 142/135 mm rear wheel conversion kit (HH12 version)Features:Asymmetric Rims Profile (26mm - 28mm) Milled Rim: This machining makes it possible to reduce the peripheral weight of the rim and makes the wheel extremely reactiveSpokes: G3 technology applied also to the front wheel to better perform at high braking powerFront Wheel Spokes: 14 spokes in stainless steel, section diameter 2/1.6/2mm (left side - braking side), 7 spokes in stainless steel, section diameter 2/1.6/2mm (right side)Rear Wheel Spokes: 7 spokes in stainless steel, section diameter 2/1.6/2mm (left side - braking side), 14 spokes in stainless steel, section diameter 2/1.6/2mm (right side - cassette side)Nipples: Black anodised self-locking nipples outside the rim allows for easy maintenanceCup and Cone Bearings: Easy bearing adjustment that reduces possible bearing play, maintaining performances over time and keeping the optimal contact angle between ball and trackAdjusting Locking with Micro Setting Tech: For an accurate adjustment of the hub that prevents the creation of any play21 Spokes in Stainless Steel with Mega-G3 System: Ensures extremely good stiffness and reactivity, reinforcement on the braking side at the front and cassette side at the rear. It gives a very race design to the wheelsetFront Hub: Quick Release width 100mmRear Hub: Quick Release axle width 135mmWeight: 1.675kgTechnologies:MoMag™ A technology that offers several advantages to the structural integrity of the wheel as well as eliminating the need for rim tape. The name derives from “Mounting Magnet” system, shortened to MoMag™.RDB - Rim Dynamic Balance: The concept is simple and elegant, balance the weight of the gasket with an item of similar weight placed on the exact opposite side.Buy Campagnolo Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Manitou Mastodon Comp MTB Suspension ForkThis fat bike fork features a tough straight wall aluminium leg construction, which makes it more than capable of handling the impacts and intensity associated with trail-riding. Available in either a standard or an extended ride height option, the standard version fits up to 26×4” / 27.5×3.8” tyres, while the extended version fits up to 26×5.15” / 27.5×4.5” tyres. Engineered to perform well in winter or summer riding conditions, this model is also kitted out with an Expert Air spring with IVA, VTT compression damping and In-leg adjustable TPC rebound damping. This makes it easy for riders to fine-tune it to perfectly match their riding style as well as the terrain.Features: Leg Material: 6000-Series Straight Wall Aluminium Crown Material: Forged Aluminium, Hollow Axle: 15x150mm Hexlock SL Use: MTB Steerer Diameter: 1.5" Tapered Leg Diameter: 34mm Spring: Expert Air with IVA Compression Damping: Damping VTT Rebound Damping: In-leg adjustable TPC Adjustments: Air, Air Volume, Rebound, 3-position Compression (Open, Trail, Lock) Brake Compatibility: Post Mount 180mm (203mm Max)Max Tyre Size: Size 26x4"/27.5x3.8" (Standard); 26x5.15"/27.5x4.5" (Extended)Offset: 51mmRide Height: 493-551mm (Standard); 513-571mm (Extended)Travel: 120mmE-Pac: Yes Weight: 2354g (Standard) 2374g (Extended)Manufacturer's Part Numbers: 191-35528-A102 Matt Black Standard 120mm 191-35528-A602 Matt Black Extended 120mmBuy Manitou Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
◌Marzocchi Bomber Z1 Coil Mountain Bike ForksThis Mountain Bike Fork from Marzocchi features a tried and tested modern 36mm chassis, ideal for withstanding all the challenges from tough mountain bike (MTB) trails. Benefiting from Marzocchi's GRIP damper, it replaces the air-spring with a highly advanced coil system, for a lightweight spring that's made from tempered silicon Chromoly (CrMo) for exceptional durability and control, no matter what the terrain brings.Adjustable MTB Coil ForkReady for fast-paced adventures, this MTB fork is kitted out with an adjustment noise reduction system. This allows you to benefit from almost silent operation and external preload adjustment, which enables you to fine-tune the sag and suspension firmness. Compression and rebound can also be fine-tuned to set the fork up to suit your riding preferences and the trail conditions. One final highlight is the Marzochhi Bomber Z1 Coil Fork allows for alternative spring weights or inner spacers to be installed. This means you can customise its travel and performance even further.Features:Use: MTBFork Material: AluminiumFork Travel: 170mmChassis: 36mmAxle Included: YesAxle Type: 15 Quick Release x 110Damping: GRIP (compression + rebound)Lockout: YesOffset: 44mmSpring: Tempered Silicone-Chromium SteelSteerer: 1.5" tapered AluminiumStanchions: 36mm black AnodisedRake: 44mmWeight: 2.525g (starting weight complete fork)Manufacturer Part Numbers:Black 29", Travel 170mm: MAZ-912-01-091Black 29", Travel 160mm: MAZ-912-01-096Black 27.5", Travel 180mm: MAZ-912-01-099Black 27.5", Travel 170mm: MAZ-912-01-100Red 27.5", Travel 180mm: MAZ-912-01-101Red 29", Travel 170mm: MAZ-912-01-097Buy Marzocchi Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Designed not only for the race down, but the ride up. Holding onto every critical line, Lyrik Ultimate features an updated DebonAir air spring paired with our Charger 2.1 damper for unmatched trail control and precision. Ultra-low friction SKF wiper seals and Maxima Plush damping fluid all work overtime to reduce friction, silence noise, and provide unmatched fork performance sun up to sun down. FEATURES Updated highly tunable DebonAir™ air spring offers a buttery smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain Designed to reduce hand fatigue and fight unwanted friction, the Charger™ 2.1 damper increases confidence and control over every trail Charger™ 2.1 RC2 damper featuring independent high and low speed compression adjust Charger™ 2.1 RCT3 damper featuring 3-position compression adjust (open/pedal/firm) with low speed compression adjust Ultra-low friction SKF wiper seals provide long lasting fork performance and improve overall suspension feel Maxima Plush damping fluid reduces friction and silences damper noise BoXXer Red Signature colorway and Ultimate High Gloss Black Ultimate foil graphics package
Designed not only for the race down, but the ride up. Holding onto every critical line, Lyrik Ultimate features an updated DebonAir air spring paired with our Charger 2.1 damper for unmatched trail control and precision. Ultra-low friction SKF wiper seals and Maxima Plush damping fluid all work overtime to reduce friction, silence noise, and provide unmatched fork performance sun up to sun down. FEATURES Updated highly tunable DebonAir™ air spring offers a buttery smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain Designed to reduce hand fatigue and fight unwanted friction, the Charger™ 2.1 damper increases confidence and control over every trail Charger™ 2.1 RC2 damper featuring independent high and low speed compression adjust Charger™ 2.1 RCT3 damper featuring 3-position compression adjust (open/pedal/firm) with low speed compression adjust Ultra-low friction SKF wiper seals provide long lasting fork performance and improve overall suspension feel Maxima Plush damping fluid reduces friction and silences damper noise BoXXer Red Signature colorway and Ultimate High Gloss Black Ultimate foil graphics package