The Praxis Works M30 T47 68mm/73mm bottom bracket is for installing the Praxis M30 Spindle based crank into a T47 frame. This BB is designed for 68mm Road frames and 68/73mm Mountain frames.Only for Praxis M30 spindle cranks being installed on a T47 frame68mm Road version / 68/73mm MTB setup30mm Drive bearing / 28mm Non Drive bearing , Steel cartridge bearingsForged & machined heat-treated AL CupsBB M30 - T47 E.B. Threaded 68mm/73mm
Whether you re cyclo-crossing in mud or grinding gravel, Praxis 1X rings are ready for action with the Wave tooth profile. Licensed and developed in conjunction with Mountain Racing Products, the Wave profile applies alternating lateral force to each chain link to actively retain the chain to the ring going beyond narrow/wide implementations that rely solely on friction, while allowing room for mud, debris, and grit to escape. The Wave design also wears more slowly than competing designs by spreading the load over larger surface areas. Plus the 1X rings are machined from top quality plate 7075 T6 aluminium for superior stiffness and hard anodized to take a beating.PLEASE NOTE: Chainring bolts are NOT included.110 BCD7075-T6 AluminiumAvailable in 42t and 40t sizesWide/Narrow10 & 11 Speed compatibleMust be used with 'Clutch' type Rear Derailleur
Whether you re cyclo-crossing in mud or grinding gravel, Praxis 1X rings are ready for action with the Wave tooth profile. Licensed and developed in conjunction with Mountain Racing Products, the Wave profile applies alternating lateral force to each chain link to actively retain the chain to the ring going beyond narrow/wide implementations that rely solely on friction, while allowing room for mud, debris, and grit to escape. The Wave design also wears more slowly than competing designs by spreading the load over larger surface areas. Plus the 1X rings are machined from top quality plate 7075 T6 aluminium for superior stiffness and hard anodized to take a beating.PLEASE NOTE: Chainring bolts are NOT included.110 BCD7075-T6 AluminiumAvailable in 42t and 40t sizesWide/Narrow10 & 11 Speed compatibleMust be used with 'Clutch' type Rear Derailleur
Designed specifically for e-Bikes and longer wear, the Praxis Works steel e-Rings are cold forged from 4130 high-grade steel with a nice black oxide finish. Licensed and developed in conjunction with Mountain Racing Products, the Wave pattern tooth profile applies alternating lateral force to each chain link to actively retain the chain to the ring going beyond narrow/wide implementations that rely solely on friction, while allowing room for mud, debris, and grit to escape. The Wave design also wears more slowly than competing designs by spreading the load over larger surface areas.PLEASE NOTE: Chainring bolts are NOT included.Steel eRing for eBikes Female threadWave TechCold-Forged 4130 SteelMust use 'Clutch' style Derailleur10, 11 & 12 Speed compatible
Designed specifically for e-Bikes and longer wear, the Praxis Works steel e-Rings are cold forged from 4130 high-grade steel with a nice black oxide finish. Licensed and developed in conjunction with Mountain Racing Products, the Wave pattern tooth profile applies alternating lateral force to each chain link to actively retain the chain to the ring going beyond narrow/wide implementations that rely solely on friction, while allowing room for mud, debris, and grit to escape. The Wave design also wears more slowly than competing designs by spreading the load over larger surface areas.PLEASE NOTE: Chainring bolts are NOT included.Steel eRing for eBikes Female threadWave TechCold-Forged 4130 SteelMust use 'Clutch' style Derailleur10, 11 & 12 Speed compatible
Designed specifically for e-Bikes and longer wear, the Praxis Works steel e-Rings are cold forged from 4130 high-grade steel with a nice black oxide finish. Licensed and developed in conjunction with Mountain Racing Products, the Wave pattern tooth profile applies alternating lateral force to each chain link to actively retain the chain to the ring going beyond narrow/wide implementations that rely solely on friction, while allowing room for mud, debris, and grit to escape. The Wave design also wears more slowly than competing designs by spreading the load over larger surface areas.PLEASE NOTE: Chainring bolts are NOT included.Steel eRing for eBikes Female threadWave TechCold-Forged 4130 SteelMust use 'Clutch' style Derailleur10, 11 & 12 Speed compatible
The development of narrow/wide chainrings and 1x drivetrains changed the face of mountain biking over night, with simpler, lighter drivetrains. Not content with simply following the crowd, Praxis Works teamed up with MRP to create their Wave series of chainrings.Compatible with 104mm BCD cranksUnique Wave alternating tooth design improves chain retentionStamped and machined manufacturing process with hard anodised finish is extremely durableCompatible with 10/11/12 speed SRAM & Shimano drivetrainsMust be used with clutch-type Shimano Shadow Plus or SRAM Type 2/3 rear derailleursLicensed and developed in conjunction with MRP, the unique Wave tooth pattern is designed to improve chain retention and chainring durability, as well as improves the ability to shed mud and debris; a common complaint of regular narrow/wide chainrings. With a lightweight stamped and machined 7075 T6 aluminium construction, the rings are finished with a durable hard anodised finish. The result is a chainring that offers excellent chain retention, is highly durable and gives you one less thing to worry about. Designed to work with 104mm BCD cranks, the chainring can be mounted or removed in seconds. Tough enough for enduro and downhill use yet light enough to grace any cross country race bike, the Praxis Works Wave 1x Direct Mount Chainring is perfect for riders who want to fit their components, forget about them and enjoy the ride!
The development of narrow/wide chainrings and 1x drivetrains changed the face of mountain biking over night, with simpler, lighter drivetrains. Not content with simply following the crowd, Praxis Works teamed up with MRP to create their Wave series of chainrings.Compatible with 104mm BCD cranksUnique Wave alternating tooth design improves chain retentionStamped and machined manufacturing process with hard anodised finish is extremely durableCompatible with 10/11/12 speed SRAM & Shimano drivetrainsMust be used with clutch-type Shimano Shadow Plus or SRAM Type 2/3 rear derailleursLicensed and developed in conjunction with MRP, the unique Wave tooth pattern is designed to improve chain retention and chainring durability, as well as improves the ability to shed mud and debris; a common complaint of regular narrow/wide chainrings. With a lightweight stamped and machined 7075 T6 aluminium construction, the rings are finished with a durable hard anodised finish. The result is a chainring that offers excellent chain retention, is highly durable and gives you one less thing to worry about. Designed to work with 104mm BCD cranks, the chainring can be mounted or removed in seconds. Tough enough for enduro and downhill use yet light enough to grace any cross country race bike, the Praxis Works Wave 1x Direct Mount Chainring is perfect for riders who want to fit their components, forget about them and enjoy the ride!
Praxis Works don't do conventional. They set out to create something better than everything else. The LevaTime II X-Kit Chainrings are one such example. A unique construction method and advanced shifting features create the ultimate chainrings.Unique cold forged 7075 T6 aluminium construction is lighter, stronger & more durable than stamped or machined chainringsLevaTime II Shifting Technology boasts synchronised ramps & shift pins to deliver perfect shifts every timeOnly compatible with 3-bolt Praxis Road cranksFor use with 10 & 11-speed drivetrains - not compatible with 12-speed SRAM FlatTop chainsWhereas most chainrings are stamped or machined pieces of aluminium, the Praxis Works LevaTime II X-Kit Chainrings that are cold forged from 7075 T6 aluminium and then hard anodized. This unique method creates chainrings that are just as light, but are much, much harder wearing and provide slicker shifting for longer. Further improving the shifting performance is Praxis Works LevaTime II Shifting Technology. LevaTime Shifting boasts a series of synchronised ramps and strategically placed shift pins to help deliver perfecting every time. The new LTII rings are now thicker at 5mm to improve stiffness and shifting performance further. Thanks to this and the durable construction, the X-Kit Chainrings will provide silky smooth shifting for years to come.
Named after a famous redwood-covered climb in Santa Cruz, California, the Praxis Works Zayante S crankset is designed to offer incredible value and cutting-edge technology with an excellent range of gearing options & lightweight construction.Lightweight carbon crank arms are incredibly stiff for efficient power transferM30 spindle is compatible with BSA, BB86, 386EVO, BB30, PF30, T47, BBRight & OSBB bottom bracket shells BB's sold separately10/11spd LevaTime II chainrings are cold forged for supreme shift quality & durabilityVersatile modular design can accept 2x or 1x DM chainringsLightweight at just 684g (172.5mm w/ 50/34T Chainrings)Where most cranksets can only be fitted with a small selection of chainrings, the Zayante S is designed with versatility in mind. While equipped with 2x chainrings as standard, the direct mount design can easily be swapped out for a 1x chainring or another 2x combination in a different ratio. Praxis wants you to have control. Add in to this compatibility with pretty much any bottom bracket shell on the market when used with the appropriate bottom bracket, and you have an incredibly versatile crankset that is happy to grace lightweight carbon race bikes or tough steel gravel bikes. The crankarms themselves are hollow forged, which gives them immense strength and stiffness, so you can be sure every watt of power your legs can muster isn't wasn't with flex. Despite this, the crankset is extremely light at just 684g. The M30 spindle also helps to keep weight low and stiffness high.Whereas most chainrings are stamped or machined pieces of aluminium, the Zayante S's chainrings are cold forged from 7075 T6 aluminium and then hard anodized. This unique method creates chainrings that are just as light, but are much, much harder wearing and provide slicker shifting for longer. Further improving the shifting performance is Praxis Works LevaTime II Shifting Technology. LevaTime II Shifting boasts a series of synchronised ramps and strategically placed shift pins to help deliver perfecting every time. Lightweight, stiff, smooth shifting and extremely versatile, the Praxis Works Zayante M30 DM crankset is perfect for riders who want maximum performance without breaking the bank.
Named after a brutal 4 mile, 1800ft climb called Alba Road in Santa Cruz, California, the Praxis Works Alba X crankset is designed to laugh in the face of such climbs, with an excellent range of gearing options & lightweight construction all without a heavy weight price.Lightweight solid forged arms are incredibly stiff for efficient power transferM30 spindle is compatible with BSA, BB86, 386EVO, BB30, PF30, T47, BBRight & OSBB bottom bracket shells BB's sold separately10/11spd LevaTime II chainrings are cold forged for supreme shift quality & durabilityVersatile modular design can accept 2x or 1x DM chainringsLightweight at just 800g (170mm w/ 50/34T Chainrings)Where most cranksets can only be fitted with a small selection of chainrings, the Alba X is designed with versatility in mind. While equipped with 2x chainrings as standard, the direct mount design can easily be swapped out for a 1x chainring or another 2x combination in a different ratio. Praxis wants you to have control. Add in to this compatibility with pretty much any bottom bracket shell on the market when used with the appropriate bottom bracket, and you have an incredibly versatile crankset that is happy to grace lightweight carbon race bikes or tough steel gravel bikes. The crankarms themselves are solid forged, which gives them immense strength and stiffness, so you can be sure every watt of power your legs can muster isn't wasn't with flex. Despite this, the crankset is extremely light at just 800g. The M30 spindle also helps to keep weight low and stiffness high.Whereas most chainrings are stamped or machined pieces of aluminium, the Alba X's chainrings are cold forged from 7075 T6 aluminium and then hard anodized. This unique method creates chainrings that are just as light, but are much, much harder wearing and provide slicker shifting for longer. Further improving the shifting performance is Praxis Works LevaTime II Shifting Technology. LevaTime II Shifting boasts a series of synchronised ramps and strategically placed shift pins to help deliver perfecting every time. Lightweight, stiff, smooth shifting and extremely versatile, the Praxis Works Alba X crankset is perfect for riders who want maximum performance without breaking the bank.
Named after a brutal 4 mile, 1800ft climb called Alba Road in Santa Cruz, California, the Praxis Works Alba X crankset is designed to laugh in the face of such climbs, with an excellent range of gearing options & lightweight construction all without a heavy weight price.Lightweight solid forged arms are incredibly stiff for efficient power transferM30 spindle is compatible with BSA, BB86, 386EVO, BB30, PF30, T47, BBRight & OSBB bottom bracket shells BB's sold separately10/11spd LevaTime II chainrings are cold forged for supreme shift quality & durabilityVersatile modular design can accept 2x or 1x DM chainringsLightweight at just 800g (170mm w/ 50/34T Chainrings)Where most cranksets can only be fitted with a small selection of chainrings, the Alba X is designed with versatility in mind. While equipped with 2x chainrings as standard, the direct mount design can easily be swapped out for a 1x chainring or another 2x combination in a different ratio. Praxis wants you to have control. Add in to this compatibility with pretty much any bottom bracket shell on the market when used with the appropriate bottom bracket, and you have an incredibly versatile crankset that is happy to grace lightweight carbon race bikes or tough steel gravel bikes. The crankarms themselves are solid forged, which gives them immense strength and stiffness, so you can be sure every watt of power your legs can muster isn't wasn't with flex. Despite this, the crankset is extremely light at just 800g. The M30 spindle also helps to keep weight low and stiffness high.Whereas most chainrings are stamped or machined pieces of aluminium, the Alba X's chainrings are cold forged from 7075 T6 aluminium and then hard anodized. This unique method creates chainrings that are just as light, but are much, much harder wearing and provide slicker shifting for longer. Further improving the shifting performance is Praxis Works LevaTime II Shifting Technology. LevaTime II Shifting boasts a series of synchronised ramps and strategically placed shift pins to help deliver perfecting every time. Lightweight, stiff, smooth shifting and extremely versatile, the Praxis Works Alba X crankset is perfect for riders who want maximum performance without breaking the bank.