Fox Suspension 34 Float SC Factory Fit4 ForkPart of Fox Suspension's legendary Factory Series, this cross country (XC) suspension fork includes the best-of-the-best technologies and features for tackling the most challenging of XC racing conditions. Developed to exceed the demands of Factory-level riders, this model features a genuine Kashima coating on its upper tubes for slippery smooth, ultra-durable performance. Classed as the brand's lightest ever 34 fork thanks to its Step-Cast design, it is specifically developed from the ground up to deliver uncompromised execution with class-leading tuneability, chassis stiffness and strength. Coming complete with a lightweight Float EVOL air spring and a FIT4 damper with three-position adjust, this is a great choice of upgrade for dialling in your favourite settings and enjoying dependable front end suspension that matches your riding style as well as the terrain.XC Racing Fork with Float EVOL Air SpringReturning with the same legendary suppleness and longevity, the EVOL air spring in 34's now has an enlarged negative air spring to assist with mid-stroke support. The 34 SC also comes with the option to tune the negative air spring with a volume spacer.FIT4 Damper with 3-Position AdjustIn its fourth generation, Fox Suspension's patented FIT4 closed cartridge system provides three on-the-fly compression damping positions (Open, Medium, and Firm) to adapt to varying trail conditions. Factory Series forks feature an additional 22 clicks of low-speed compression adjust in the Open mode, allowing riders to fine-tune their exact damping preferences.Features: Upper Tubes Finish: Genuine Kashima Coat Use: Cross Country (XC) Axle: Kabolt 110mm Steerer Diameter: 1.5" tapered Air Spring: Float EVOL Damper: FIT4 3-Position Adjust Max Tyre Size: 29x2.40" Crown Diameter: 58mm diameter crown Brake Rotor Compatibility: 160-180mm Starting Weight: 1496gTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional low-speed compression (Open mode adjust) 22 clicks. Low-speed rebound 10 clicks. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. The all-new 34 pulls out all the stops, shaving every possible gram while making sure not to compromise the stiffness or strength requirements of modern trail riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design is designed to pair perfectly with modern trail bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material.Manufacturer's Part Numbers: 910-21-053 Black 29" KB110 100mm 44mm 910-21-060 Black 29" KB110 100mm 51mm 910-21-057 Orange 29" KB110 100mm 44mm 910-21-014 Black 29" KB110 120mm 51mm 910-21-013 Black 29" KB110 120mm 44mm 910-21-012 Orange 29" KB110 120mm 51mm 910-21-011 Orange 29" KB110 120mm 44mmBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension 34 Float SC Factory Fit4 ForkPart of Fox Suspension's legendary Factory Series, this cross country (XC) suspension fork includes the best-of-the-best technologies and features for tackling the most challenging of XC racing conditions. Developed to exceed the demands of Factory-level riders, this model features a genuine Kashima coating on its upper tubes for slippery smooth, ultra-durable performance. Classed as the brand's lightest ever 34 fork thanks to its Step-Cast design, it is specifically developed from the ground up to deliver uncompromised execution with class-leading tuneability, chassis stiffness and strength. Coming complete with a lightweight Float EVOL air spring and a FIT4 damper with three-position adjust, this is a great choice of upgrade for dialling in your favourite settings and enjoying dependable front end suspension that matches your riding style as well as the terrain.XC Racing Fork with Float EVOL Air SpringReturning with the same legendary suppleness and longevity, the EVOL air spring in 34's now has an enlarged negative air spring to assist with mid-stroke support. The 34 SC also comes with the option to tune the negative air spring with a volume spacer.FIT4 Damper with 3-Position AdjustIn its fourth generation, Fox Suspension's patented FIT4 closed cartridge system provides three on-the-fly compression damping positions (Open, Medium, and Firm) to adapt to varying trail conditions. Factory Series forks feature an additional 22 clicks of low-speed compression adjust in the Open mode, allowing riders to fine-tune their exact damping preferences.Features: Upper Tubes Finish: Genuine Kashima Coat Use: Cross Country (XC) Axle: Kabolt 110mm Steerer Diameter: 1.5" tapered Air Spring: Float EVOL Damper: FIT4 3-Position Adjust Max Tyre Size: 29x2.40" Crown Diameter: 58mm diameter crown Brake Rotor Compatibility: 160-180mm Starting Weight: 1496gTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional low-speed compression (Open mode adjust) 22 clicks. Low-speed rebound 10 clicks. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. The all-new 34 pulls out all the stops, shaving every possible gram while making sure not to compromise the stiffness or strength requirements of modern trail riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design is designed to pair perfectly with modern trail bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material.Manufacturer's Part Numbers: 910-21-053 Black 29" KB110 100mm 44mm 910-21-060 Black 29" KB110 100mm 51mm 910-21-057 Orange 29" KB110 100mm 44mm 910-21-014 Black 29" KB110 120mm 51mm 910-21-013 Black 29" KB110 120mm 44mm 910-21-012 Orange 29" KB110 120mm 51mm 910-21-011 Orange 29" KB110 120mm 44mmBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension 34 Float SC Factory Fit4 ForkPart of Fox Suspension's legendary Factory Series, this cross country (XC) suspension fork includes the best-of-the-best technologies and features for tackling the most challenging of XC racing conditions. Developed to exceed the demands of Factory-level riders, this model features a genuine Kashima coating on its upper tubes for slippery smooth, ultra-durable performance. Classed as the brand's lightest ever 34 fork thanks to its Step-Cast design, it is specifically developed from the ground up to deliver uncompromised execution with class-leading tuneability, chassis stiffness and strength. Coming complete with a lightweight Float EVOL air spring and a FIT4 damper with three-position adjust, this is a great choice of upgrade for dialling in your favourite settings and enjoying dependable front end suspension that matches your riding style as well as the terrain.XC Racing Fork with Float EVOL Air SpringReturning with the same legendary suppleness and longevity, the EVOL air spring in 34's now has an enlarged negative air spring to assist with mid-stroke support. The 34 SC also comes with the option to tune the negative air spring with a volume spacer.FIT4 Damper with 3-Position AdjustIn its fourth generation, Fox Suspension's patented FIT4 closed cartridge system provides three on-the-fly compression damping positions (Open, Medium, and Firm) to adapt to varying trail conditions. Factory Series forks feature an additional 22 clicks of low-speed compression adjust in the Open mode, allowing riders to fine-tune their exact damping preferences.Features: Upper Tubes Finish: Genuine Kashima Coat Use: Cross Country (XC) Axle: Kabolt 110mm Steerer Diameter: 1.5" tapered Air Spring: Float EVOL Damper: FIT4 3-Position Adjust Max Tyre Size: 29x2.40" Crown Diameter: 58mm diameter crown Brake Rotor Compatibility: 160-180mm Starting Weight: 1496gTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional low-speed compression (Open mode adjust) 22 clicks. Low-speed rebound 10 clicks. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. The all-new 34 pulls out all the stops, shaving every possible gram while making sure not to compromise the stiffness or strength requirements of modern trail riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design is designed to pair perfectly with modern trail bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material.Manufacturer's Part Numbers: 910-21-053 Black 29" KB110 100mm 44mm 910-21-060 Black 29" KB110 100mm 51mm 910-21-057 Orange 29" KB110 100mm 44mm 910-21-014 Black 29" KB110 120mm 51mm 910-21-013 Black 29" KB110 120mm 44mm 910-21-012 Orange 29" KB110 120mm 51mm 910-21-011 Orange 29" KB110 120mm 44mmBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension 34 Float SC Factory Remote ForkIf you're serious about gaining a competitive advantage on the toughest cross country (XC) racing trails, the 34 Float SC Factory model is the ideal mountain bike (MTB) fork choice. Its Kashima coated stanchions ensure super-smooth travel to help you maintain your speed over tree roots, rock gardens and anything else the trail throws at you.Part of Fox Suspension's renowned Factory Series, this suspension fork is specifically tailored for the cross country (XC) racing with a build that's feature-packed and to exceed the demands of Factory-level riders. It's equipped with an updated chassis that's 15% stiffer than the 32 standard model as well as a revised arch shape that offers improved head tube clearance with shorter rakes. Developed from the ground up to deliver uncompromised XC racing performance, it's also kitted out with a Float EVOL air spring and a FIT4 3-Position damper for a high level of tuneability and control. Coming complete with a genuine Kashima upper tube coating that's slippery smooth and ultra-durable, this is a great choice of upgrade for dependable front-end suspension performance on the most demanding of racing conditions.XC Fork with Float EVOL Air SpringReturning with the same legendary suppleness and longevity, the EVOL air spring in 34’s now has an enlarged negative air spring to assist with mid-stroke support. The 34 SC also comes with the option to tune the negative air spring with a volume spacer.FIT4 3-Position DamperIn its fourth generation, Fox Suspension's patented FIT4 closed cartridge system provides three on-the-fly compression damping positions (Open, Medium, and Firm) to adapt to varying trail conditions. Factory Series forks feature an additional 22 clicks of low-speed compression adjust in the Open mode, allowing riders to fine-tune their exact damping preferences.Features: Upper Tube Finish: Genuine Kashima Use: Cross Country (XC) Axle: Kabolt 110mm Boost Air Spring: Float EVOL air spring Damper: FIT4 3-Position Remote Push to Lock (PTL) Steerer Diameter: 1.5" tapered Wheel Size: 29" Max Tyre Size: 29x2.40" Rotor Size: 160mm direct Post Mount, Up to 180mm compatible Remote Compatible: Yes (sold separately) Offset: 44mm Weight: 1496g (starting weight)Technologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional low-speed compression (Open mode adjust) 22 clicks, Low-speed rebound 10 clicks Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. The all-new 34 pulls out all the stops, shaving every possible gram while making sure not to compromise the stiffness or strength requirements of modern trail riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design is designed to pair perfectly with modern trail bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of materialBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension 34 Float SC Factory Remote ForkIf you're serious about gaining a competitive advantage on the toughest cross country (XC) racing trails, the 34 Float SC Factory model is the ideal mountain bike (MTB) fork choice. Its Kashima coated stanchions ensure super-smooth travel to help you maintain your speed over tree roots, rock gardens and anything else the trail throws at you.Part of Fox Suspension's renowned Factory Series, this suspension fork is specifically tailored for the cross country (XC) racing with a build that's feature-packed and to exceed the demands of Factory-level riders. It's equipped with an updated chassis that's 15% stiffer than the 32 standard model as well as a revised arch shape that offers improved head tube clearance with shorter rakes. Developed from the ground up to deliver uncompromised XC racing performance, it's also kitted out with a Float EVOL air spring and a FIT4 3-Position damper for a high level of tuneability and control. Coming complete with a genuine Kashima upper tube coating that's slippery smooth and ultra-durable, this is a great choice of upgrade for dependable front-end suspension performance on the most demanding of racing conditions.XC Fork with Float EVOL Air SpringReturning with the same legendary suppleness and longevity, the EVOL air spring in 34’s now has an enlarged negative air spring to assist with mid-stroke support. The 34 SC also comes with the option to tune the negative air spring with a volume spacer.FIT4 3-Position DamperIn its fourth generation, Fox Suspension's patented FIT4 closed cartridge system provides three on-the-fly compression damping positions (Open, Medium, and Firm) to adapt to varying trail conditions. Factory Series forks feature an additional 22 clicks of low-speed compression adjust in the Open mode, allowing riders to fine-tune their exact damping preferences.Features: Upper Tube Finish: Genuine Kashima Use: Cross Country (XC) Axle: Kabolt 110mm Boost Air Spring: Float EVOL air spring Damper: FIT4 3-Position Remote Push to Lock (PTL) Steerer Diameter: 1.5" tapered Wheel Size: 29" Max Tyre Size: 29x2.40" Rotor Size: 160mm direct Post Mount, Up to 180mm compatible Remote Compatible: Yes (sold separately) Offset: 44mm Weight: 1496g (starting weight)Technologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional low-speed compression (Open mode adjust) 22 clicks, Low-speed rebound 10 clicks Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. The all-new 34 pulls out all the stops, shaving every possible gram while making sure not to compromise the stiffness or strength requirements of modern trail riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design is designed to pair perfectly with modern trail bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of materialBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension 36 Float Factory FIT4 Boost Fork (2023)Just when you thought the 36 Float Factory FIT4 mountain bike (MTB) fork couldn't be improved any further, Fox Suspension has updated it to be stiffer, stronger and lighter than before. This smooth performing enduro-ready model also boasts the renowned Kashima coating and offers a wide range of adjustments.This race-ready enduro suspension fork features a revised design both inside and out for smooth and reliable front end suspension performance. No stranger to winning awards, accolades and Enduro World Series (EWS) races, this model is prepared for everything from big backcountry routes to the EWS circuit. Fox Suspension has also equipped it with Boost axle spacing, making it ideal for modern enduro thanks to its extra stiffness. It also offers a wide range of adjustability from its lightweight Float EVOL air spring and its FIT4 damper that enable you to easily set it up to match your riding style. Part of the brand's renowned Factory Series, it includes the best-of-the-best technologies and it comes complete with a genuine Kashima coating on its upper tubes for slippery smooth, ultra-durable performance.Enduro Fork with Float EVOL Air SpringEVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL’s linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference.FIT4 DamperIn its fourth generation, Fox Suspension's patented FIT4 closed cartridge system provides three on-the-fly compression damping positions (Open, Medium, and Firm) to adapt to varying trail conditions. Factory Series forks feature an additional 22 clicks of low-speed compression adjust in the Open mode, allowing riders to fine-tune their exact damping preferences.Features: Upper Tubes Finish: Genuine Kashima Coat Use: MTB Axle: 15QRx110mm Boost Steerer: 1.1/8" to 1.5" Tapered Offset: 44mm Air Spring: Float EVOL Damper: FIT4 (Quick on-the-fly 3-position adjust) Brake Rotor Compatibility: 180mm direct Post Mount, up to 230mm compatibleTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional low-speed compression (Open mode adjust) 22 clicks. Low-speed rebound 10 clicks Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your ride Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel Bleeders: Fox Suspension's lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsiveness Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material Increased crown diameter to match modern frame shape profiles. Optional mudguard with sturdy 4-point direct-mount attachment protects upper tubes and dust wipers from dirt and debris. (available separately)Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension 36 Float Factory FIT4 Boost Fork (2023)Just when you thought the 36 Float Factory FIT4 mountain bike (MTB) fork couldn't be improved any further, Fox Suspension has updated it to be stiffer, stronger and lighter than before. This smooth performing enduro-ready model also boasts the renowned Kashima coating and offers a wide range of adjustments.This race-ready enduro suspension fork features a revised design both inside and out for smooth and reliable front end suspension performance. No stranger to winning awards, accolades and Enduro World Series (EWS) races, this model is prepared for everything from big backcountry routes to the EWS circuit. Fox Suspension has also equipped it with Boost axle spacing, making it ideal for modern enduro thanks to its extra stiffness. It also offers a wide range of adjustability from its lightweight Float EVOL air spring and its FIT4 damper that enable you to easily set it up to match your riding style. Part of the brand's renowned Factory Series, it includes the best-of-the-best technologies and it comes complete with a genuine Kashima coating on its upper tubes for slippery smooth, ultra-durable performance.Enduro Fork with Float EVOL Air SpringEVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL’s linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference.FIT4 DamperIn its fourth generation, Fox Suspension's patented FIT4 closed cartridge system provides three on-the-fly compression damping positions (Open, Medium, and Firm) to adapt to varying trail conditions. Factory Series forks feature an additional 22 clicks of low-speed compression adjust in the Open mode, allowing riders to fine-tune their exact damping preferences.Features: Upper Tubes Finish: Genuine Kashima Coat Use: MTB Axle: 15QRx110mm Boost Steerer: 1.1/8" to 1.5" Tapered Offset: 44mm Air Spring: Float EVOL Damper: FIT4 (Quick on-the-fly 3-position adjust) Brake Rotor Compatibility: 180mm direct Post Mount, up to 230mm compatibleTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional low-speed compression (Open mode adjust) 22 clicks. Low-speed rebound 10 clicks Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your ride Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel Bleeders: Fox Suspension's lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsiveness Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material Increased crown diameter to match modern frame shape profiles. Optional mudguard with sturdy 4-point direct-mount attachment protects upper tubes and dust wipers from dirt and debris. (available separately)Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension 36 Float Factory Grip2 Boost Fork (2022)Designed for all-mountain and enduro racing, this Fork from Fox Suspension combines quality with lightweight stiffness for unrivalled durability. It features a GRIP damper with dual variable valve control and a Float EVOL air spring so you can adjust pressure and speed compression with ease. This fork also benefits from a Kashima coating for enhanced durability and long-lasting performance when tackling tough trails. Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat.Features: Steerer Tube Material: Aluminium Crown Material: Aluminium Stanchion Tube Material: Aluminium Lower Tube Material: Magnesium Upper Leg Finish: Genuine Kashima Coat Use: All Mountain, Enduro Air Spring: Float EVOL Damper: GRIP2 with dual VVC (Variable Valve Control) Adjustment: High and low-speed compression, high and low-speed rebound, air pressure adjusts Steerer: 1 1/8-1.5" tapered Axle Type: 15 x 110mm Boost Brake Mount: Disc PM 7" (180mm direct mount) Stanchion Tube Diameter: 36mmOffset: 44mm Remote Operated: No Lever Operated: Yes Lockout: No Wheel Size: Multiple options available Floating Axle Included: Yes Mudguard mounts: Optional FOX 36/38 Mud Guard with sturdy 4-point direct-mount attachment (sold separately)Technologies:Adjustments: High-speed compression (with VVC) 8 clicks. Low-speed compression 16 clicks. High-speed rebound (with VVC) 8 clicks. Low-speed rebound 16 clicksFloating Axle: Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The updated 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your rideLower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travelBleeders: Fox Suspension's lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsivenessLower Leg Arch: The arch design of the updated 36, 38, and 40 models are designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's updated arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material.Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension 36 Float Factory Grip2 Boost Fork (2023)Boasting the best features and technologies that Fox has to offer, the race-proven 36 Float Factory Grip2 Boost Fork will enable you to dominate the toughest trails on your all mountain bike (MTB).Prepared for everything from backcountry adventures to day-long epics on your favourite mountain bike (MTB) trails, this suspension fork is engineered for the demands of modern all mountain riding. It's part of Fox Suspension's renowned Factory Series, which means that it comes feature-packed and is designed to exceed the demands of Factory-level riders. Boasting a wide range of adjustments from its Float EVOL air spring and GRIP2 damper with dual Variable Valve Control (VVC), this model makes it simple to dial in your ideal settings for smooth shock absorption and control on your ride.Fox Suspension Factory Series"Factory" says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. This version of the FOX 36 also receives an update in the form of an updated crown with an revised design and engineering for more steerer tube overlap improving durability and maintaining stiffness while dropping 20 grams.MTB Fork with Float EVOL Air SpringEVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL’s linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference.GRIP2 DamperFox Suspension's GRIP2 damper is the benchmark for unparalleled ride quality and ultra-precise adjustability. GRIP2 includes the brand's patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance. GRIP2 achieves with the twist of a knob what typically requires the time-consuming and complicated task of completely disassembling and reassembling the fork.Features: Steerer Tube Material: Aluminium Crown Material: Aluminium Stanchion Tube Material: Aluminium Lower Tube Material: Magnesium Upper Leg Finish: Genuine Kashima Coat Use: All Mountain, Enduro Air Spring: Float EVOL Damper: GRIP2 with dual VVC (Variable Valve Control) Adjustment: High and low-speed compression, high and low-speed rebound, air pressure adjusts Steerer: 1 1/8-1.5" tapered Axle Type: 15 x 110mm Boost Brake Mount: Disc PM 7" (180mm direct mount) Stanchion Tube Diameter: 36mmOffset: 44mm Remote Operated: No Lever Operated: Yes Lockout: No Wheel Size: Multiple options available Floating Axle Included: Yes Mudguard mounts: Optional FOX 36/38 Mud Guard with sturdy 4-point direct-mount attachment (sold separately)Technologies:Adjustments: High-speed compression (with VVC) 8 clicks. Low-speed compression 16 clicks. High-speed rebound (with VVC) 8 clicks. Low-speed rebound 16 clicksFloating Axle: Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The updated 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your rideLower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travelBleeders: Fox Suspension's lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsivenessLower Leg Arch: The arch design of the updated 36, 38, and 40 models are designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's updated arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material.Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension 36 Float Performance Boost ForkAn ideal addition to your mountain bike's (MTB's) front end for taking on the toughest enduro trails in the World, the 36 Float Performance fork will soak up the biggest drops and hits as you dominate on all types of terrain.This high-quality mountain bike (MTB) suspension fork is trail-ready with anodised upper tubes for hard-wearing performance and durability wherever your next ride takes you. Engineered for everything from day long epics on your favourite trails, it's kitted out with Boost axle spacing for extra stiffness as you dominate your way around the mountain. Another highlight is its lightweight Float air spring and GRIP damper for excellent tuneability and control. As a result, it's easy to dial in your settings to match your riding style as well as the terrain. Equipped with some of Fox's finest technologies, this suspension fork is a great choice of upgrade for singletrack trail riding, bike park routes and enduro racing.Inspired from moto, the GRIP damper uses Fox Suspension's FIT sealed cartridge technology combined with a coil-sprung, independent floating piston. GRIP allows excess oil to purge through specially designed ports at the top of the damper to maintain consistent damping and increase durability.E-MTB Compatible Suspension ForkCompatible electric mountain bikes (E-MTB), this suspension fork is built to perform everywhere from big backcountry routes to the EWS circuit. No stranger to winning awards, accolades and Enduro World Series (EWS) races, it features a new design inside-and-out and it's part of Fox Suspension's Performance Series which includes an anodised finish on its upper tubes for extra protection against wear and corrosion. It's also equipped with Boost axle spacing for additional stiffness, making it ideal for modern enduro riding. Coming complete with a Float EVOL air spring and a GRIP damper with three-position on-the-fly adjustability, this E-bike-ready fork provides a wide range of customisation, so you can benefit from a more rider-tuned feel.Fox Suspension GRIP DamperFox Suspension's GRIP damper is the benchmark for unparalleled ride quality and convenient 3-position adjustability. GRIP includes the brand's Open/Medium/Firm external fine-tuning dial, so you can customise ride performance on-the-fly. The GRIP damper achieves with the twist of a knob when typically, this level of adjustability would require the time-consuming and complicated task of completely disassembling and reassembling the fork.Float Air SpringEVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL’s linear spring curve delivers plushness off the top, extra mid-stroke support, and more tunable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's updated Lower Leg channels, which functions to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference.Features: Upper Tube Finish: Black Anodized Intended Use: Trail Air Spring: FLOAT EVOL Damper: GRIP (Open/Medium/Firm) Travel: 160mm Wheel Size: 27.5" Axle: 15QR x 110mm Boost Steerer: 1.1.8" to 1.5" Tapered Offset: 44mm Air Channels: Yes Bleeders: Yes Floating Axle: Yes, Kabolt X Axle 15QR x 110mm Boost Rotor Size: 180mm direct Post Mount, Up to 230mm compatible Mud Guard Mount: Optional FOX 36/38 Mud Guard with sturdy 4-point direct-mount attachment (Sold separately)Technologies: Performance Series: Performance Series forks retain the same black anodized 7000 series aluminium upper tubes as Performance Elite, except paired with a GRIP damper. Push-button bleeders are not included but can be purchased separately Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional micro-adjust between settings Detents. Low-speed rebound 10 clicks Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your ride Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modelling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material Increased crown diameter to match modern frame shape profiles Optional mudguard with sturdy 4-point direct-mount attachment protects upper tubes and dust wipers from dirt and debris. (Available separately)Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension 36 Float Performance Boost ForkAn ideal addition to your mountain bike's (MTB's) front end for taking on the toughest enduro trails in the World, the 36 Float Performance fork will soak up the biggest drops and hits as you dominate on all types of terrain.This high-quality mountain bike (MTB) suspension fork is trail-ready with anodised upper tubes for hard-wearing performance and durability wherever your next ride takes you. Engineered for everything from day long epics on your favourite trails, it's kitted out with Boost axle spacing for extra stiffness as you dominate your way around the mountain. Another highlight is its lightweight Float air spring and GRIP damper for excellent tuneability and control. As a result, it's easy to dial in your settings to match your riding style as well as the terrain. Equipped with some of Fox's finest technologies, this suspension fork is a great choice of upgrade for singletrack trail riding, bike park routes and enduro racing.Inspired from moto, the GRIP damper uses Fox Suspension's FIT sealed cartridge technology combined with a coil-sprung, independent floating piston. GRIP allows excess oil to purge through specially designed ports at the top of the damper to maintain consistent damping and increase durability.E-MTB Compatible Suspension ForkCompatible electric mountain bikes (E-MTB), this suspension fork is built to perform everywhere from big backcountry routes to the EWS circuit. No stranger to winning awards, accolades and Enduro World Series (EWS) races, it features a new design inside-and-out and it's part of Fox Suspension's Performance Series which includes an anodised finish on its upper tubes for extra protection against wear and corrosion. It's also equipped with Boost axle spacing for additional stiffness, making it ideal for modern enduro riding. Coming complete with a Float EVOL air spring and a GRIP damper with three-position on-the-fly adjustability, this E-bike-ready fork provides a wide range of customisation, so you can benefit from a more rider-tuned feel.Fox Suspension GRIP DamperFox Suspension's GRIP damper is the benchmark for unparalleled ride quality and convenient 3-position adjustability. GRIP includes the brand's Open/Medium/Firm external fine-tuning dial, so you can customise ride performance on-the-fly. The GRIP damper achieves with the twist of a knob when typically, this level of adjustability would require the time-consuming and complicated task of completely disassembling and reassembling the fork.Float Air SpringEVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL’s linear spring curve delivers plushness off the top, extra mid-stroke support, and more tunable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's updated Lower Leg channels, which functions to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference.Features: Upper Tube Finish: Black Anodized Intended Use: Trail Air Spring: FLOAT EVOL Damper: GRIP (Open/Medium/Firm) Travel: 160mm Wheel Size: 27.5" Axle: 15QR x 110mm Boost Steerer: 1.1.8" to 1.5" Tapered Offset: 44mm Air Channels: Yes Bleeders: Yes Floating Axle: Yes, Kabolt X Axle 15QR x 110mm Boost Rotor Size: 180mm direct Post Mount, Up to 230mm compatible Mud Guard Mount: Optional FOX 36/38 Mud Guard with sturdy 4-point direct-mount attachment (Sold separately)Technologies: Performance Series: Performance Series forks retain the same black anodized 7000 series aluminium upper tubes as Performance Elite, except paired with a GRIP damper. Push-button bleeders are not included but can be purchased separately Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional micro-adjust between settings Detents. Low-speed rebound 10 clicks Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your ride Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modelling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material Increased crown diameter to match modern frame shape profiles Optional mudguard with sturdy 4-point direct-mount attachment protects upper tubes and dust wipers from dirt and debris. (Available separately)Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension 38 Float Factory Grip 2 ForkSpecifically designed for enduro riders who want to go big, this Factory Series suspension fork comes feature-packed to exceed the demands of Factory-level riders. Ready for fast enduro rides with a design that's built for speed, this model's genuine Kashima coating on its upper tubes makes it slippery smooth and ultra-durable as you conquer the most demanding of trail conditions. Thanks to its Boost axle spacing, it provides stronger and stiffer performance, while its Float EVOL air spring and GRIP2 damper with dual Variable Valve Control (VVC) make it easy to tweak it to match your riding style. Packing the same revolutionary features as the 36 model while redefining what you think a long travel single crown fork is capable of, this enduro fork sets a new benchmark for confidence, performance, and durability. Welcome to the big time.Enduro Fork with GRIP2 DamperFox Suspension's GRIP2 damper is the benchmark for unparalleled ride quality and ultra-precise adjustability. GRIP2 includes the brand's patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance. GRIP2 achieves with the twist of a knob what typically requires the time-consuming and complicated task of completely disassembling and reassembling the fork.Float EVOL Air SpringEVOL technology increases negative air spring volume, optimizing small bump sensitivity. EVOL's linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference.Features: Upper Tubes Finish: Genuine Kashima Coat Use: Enduro, Mountain Bike (MTB) Axle Size: 15QRx110mm Boost Air Spring: Float EVOL Damper: GRIP2 damper with dual Variable Valve Control (VVC) Steerer Diameter: 1.5" tapered (internally elliptical) Compatible Rotor Size: 180mm direct Post Mount, up to 230mm compatible Weight: 2180gTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Adjustments: High-speed compression (with VVC) 8 clicks. Low-speed compression 16 clicks. High-speed rebound (with VVC) 8 clicks. Low-speed rebound 16 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork's wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork's travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don't want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Bleeders: Fox Suspension's lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsiveness. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's all-new lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. Elliptical Steerer: The 38's elliptical steer tube is one of many ways Fox Suspension has further optimized stiffness-to-weight, placing more material only where it is needed, and eliminating every ounce of it where it's not.Manufacturer's Part Numbers: 910-21-031 Black 27.5" QR110 170mm 44mm 910-21-028 Black 27.5" QR110 180mm 44mm 910-21-027 Black 27.5" QR110 180mm 37mm 910-20-201 Orange 27.5" QR110 170mm 44mm 910-21-025 Black 29" QR110 160mm 51mm 910-21-020 Black 29" QR110 180mm 44mm 910-21-024 Black 29" QR110 160mm 44mm 910-21-022 Black 29" QR110 170mm 44mm 910-20-200 Orange 29" QR110 170mm 44mmBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.