The SQlab 611 Ergowave Saddle was precisely designed to accommodate the requirements of off-road cycling and perfectly meet the demands of All Mountain and Enduro use. Designed specifically for use on all mountain and enduro mountain bikesWave shape with raised rear section is perfect for efficient power transferLowered nose is 4mm wider than 612 and provides optimal relief for the perineal area280mm in length to give maximum range of movement when climbing and descendingSolid CrMo rails and PU Light foam padding keep weight down to just 244g (12cm size)The 611 Ergowave CrMo features a wave-like shape and raised rear section provides that perfect rearward support and optimal pressure distribution for improved power transmission. The lowered nose in combination with the dip provides optimal pressure relief for the perineal area. For an even better pressure relief, especially on long technical climbs, the saddle nose of the 611 was made approximately 4 mm wider than that of the 612, but just as flat and with largest possible surface area. The padding was designed for the specific needs on the MTB with better dampening properties than the 612 making it perfect for rough off-road terrain. Additionally, a premium quality Kevlar material protects the saddle in the exposed places. Due to its flex properties, the saddle is most comfortable up to 75 kg. The maximum load should not exceed 90 kg. If you want a supremely comfortable saddle for your all mountain or enduro bike, look no further than the SQlab 611 Ergowave!
Introducing the excellent SQlab 612 Ergowave R Carbon Saddle. The proven SQlab Ergowave form relieves the soft tissue area and prevents energy- consuming bad posture. The saddle shell is weight and flex optimized down to the last detail. More longitudinal stiffness and perfectly coordinated material flex to the side mean more comfort with less weight at the same time. The cover is extremely light but also abrasion-resistant and non-slip. The padding is closed-cell and strongly minimised. The comfort comes from the shape and the flex behaviour between rail - shell - foam, which is coordinated as an overall system.Shorter - Narrower - Lighter - FasterMore performance based ergonomics from 125g.The raised rear gives more grip and better power transmission.A big advantage is on straight roads and especially uphill.The stronger narrower mid-section and the narrow saddle nose gives more legroom.Perfect fit - The correct width saddle is a prerequisite for maximum performance. Available width: 12 / 13 / 14 cmSleek rear - The raised rear gives more grip and better power transmission. A big advantage is on straight roads and especially uphill.Narrower - The stronger narrower mid-section and the narrow saddle nose give more legroom.Extended Dip - The slight depression in the middle of the saddle has been lengthened for a very sporty sitting position to reduce the pressure on the sensitive structures of the perineal area. Weight and flex optimised - More longitudinal stiffness and perfectly coordinated material flex to the side mean more comfort with less weight at the same time. 125g.Very sporty sitting position on the road bike and XC Saddle camber from min. 5cm raised saddleFor performance-oriented rides and races Strongly minimized, firm padding with maximum legroom From 125g
Introducing the excellent SQlab 612 Ergowave R Carbon Saddle. The proven SQlab Ergowave form relieves the soft tissue area and prevents energy- consuming bad posture. The saddle shell is weight and flex optimized down to the last detail. More longitudinal stiffness and perfectly coordinated material flex to the side mean more comfort with less weight at the same time. The cover is extremely light but also abrasion-resistant and non-slip. The padding is closed-cell and strongly minimised. The comfort comes from the shape and the flex behaviour between rail - shell - foam, which is coordinated as an overall system.Shorter - Narrower - Lighter - FasterMore performance based ergonomics from 125g.The raised rear gives more grip and better power transmission.A big advantage is on straight roads and especially uphill.The stronger narrower mid-section and the narrow saddle nose gives more legroom.Perfect fit - The correct width saddle is a prerequisite for maximum performance. Available width: 12 / 13 / 14 cmSleek rear - The raised rear gives more grip and better power transmission. A big advantage is on straight roads and especially uphill.Narrower - The stronger narrower mid-section and the narrow saddle nose give more legroom.Extended Dip - The slight depression in the middle of the saddle has been lengthened for a very sporty sitting position to reduce the pressure on the sensitive structures of the perineal area. Weight and flex optimised - More longitudinal stiffness and perfectly coordinated material flex to the side mean more comfort with less weight at the same time. 125g.Very sporty sitting position on the road bike and XC Saddle camber from min. 5cm raised saddleFor performance-oriented rides and races Strongly minimized, firm padding with maximum legroom From 125g
The new e-bike saddle 6OX combines the advantages of the successful saddle models Ergowave and Ergolux. As part of the product development, the shape of the saddle was adapted and perfected for the special use on the E-MTB as well as for the Gravity Bike.Perfect Fit - The correct saddle width is a key for maximum performance. Available widths in cm: 13, 14, 15, 16More free space - less pressure - The proven, outstanding SQlab staged saddle shape with the saddle nose that dips below level also provides more freedom for the 6OX and less pressure, equally so for men and for women.Perfect hold - The SQlab saddle shape with the raised seat surface is already perfectly suited for riding uphill and provides more power to the pedals on straights. Additionally, a special non-slip logo design ensures even more grip towards the back.Grip design - The grip material on the raised stage provides additional hold towards the back.Biomechanics - The proven SQlab 6OX active saddle technology provides increased efficiency for pedalling, as well as more comfort and less stress on intervertebral discs.The 6OX saddle is equipped with 3 different elastomer dampers that are tailored individually to body weight and can be interchanged as needed.The wave shaped 6OX profile which contours from the rear to the front offers a perfect form-fit shape for most sit bones. The raised back section provides more rearward support and ensures efficient power transmission. The grip material on the raised back provides additional support to the rear. In addition, the saddle cover is robust, especially at the edges.The level and lowered saddle nose applies less pressure to the sensitive areas of men and women alike. For an even better pressure relief, especially on long technical climbs, the saddle nose of the 6OX became a little bit wider, but just as flat and with largest possible surface area. The padding was designed for the specific needs on the E-MTB with perfect dampening properties for rough off-road terrain.Due to these modifications, the 6OX is the ideal saddle for long and steep climbs on the E-MTB and at the same time, even on bikes without an engine, it provides an optimum relief. The wave shaped 6OX profile which contours from the rear to the front offers a perfect form-fit shape for most sit bones.The SQlab active-saddle technology lets the saddle follow the pedalling motion as comfort increases, the vertebral discs are mobilized and pressure on the sit bones is minimised. The correct width saddle is a prerequisite for maximum performance. Available widths: 13 cm/14 cm/15 cm/16cm.
The new e-bike saddle 6OX combines the advantages of the successful saddle models Ergowave and Ergolux. As part of the product development, the shape of the saddle was adapted and perfected for the special use on the E-MTB as well as for the Gravity Bike.Perfect Fit - The correct saddle width is a key for maximum performance. Available widths in cm: 13, 14, 15, 16More free space - less pressure - The proven, outstanding SQlab staged saddle shape with the saddle nose that dips below level also provides more freedom for the 6OX and less pressure, equally so for men and for women.Perfect hold - The SQlab saddle shape with the raised seat surface is already perfectly suited for riding uphill and provides more power to the pedals on straights. Additionally, a special non-slip logo design ensures even more grip towards the back.Grip design - The grip material on the raised stage provides additional hold towards the back.Biomechanics - The proven SQlab 6OX active saddle technology provides increased efficiency for pedalling, as well as more comfort and less stress on intervertebral discs.The 6OX saddle is equipped with 3 different elastomer dampers that are tailored individually to body weight and can be interchanged as needed.The wave shaped 6OX profile which contours from the rear to the front offers a perfect form-fit shape for most sit bones. The raised back section provides more rearward support and ensures efficient power transmission. The grip material on the raised back provides additional support to the rear. In addition, the saddle cover is robust, especially at the edges.The level and lowered saddle nose applies less pressure to the sensitive areas of men and women alike. For an even better pressure relief, especially on long technical climbs, the saddle nose of the 6OX became a little bit wider, but just as flat and with largest possible surface area. The padding was designed for the specific needs on the E-MTB with perfect dampening properties for rough off-road terrain.Due to these modifications, the 6OX is the ideal saddle for long and steep climbs on the E-MTB and at the same time, even on bikes without an engine, it provides an optimum relief. The wave shaped 6OX profile which contours from the rear to the front offers a perfect form-fit shape for most sit bones.The SQlab active-saddle technology lets the saddle follow the pedalling motion as comfort increases, the vertebral discs are mobilized and pressure on the sit bones is minimised. The correct width saddle is a prerequisite for maximum performance. Available widths: 13 cm/14 cm/15 cm/16cm.
The new e-bike saddle 6OX combines the advantages of the successful saddle models Ergowave and Ergolux. As part of the product development, the shape of the saddle was adapted and perfected for the special use on the E-MTB as well as for the Gravity Bike.Perfect Fit - The correct saddle width is a key for maximum performance. Available widths in cm: 13, 14, 15, 16More free space - less pressure - The proven, outstanding SQlab staged saddle shape with the saddle nose that dips below level also provides more freedom for the 6OX and less pressure, equally so for men and for women.Perfect hold - The SQlab saddle shape with the raised seat surface is already perfectly suited for riding uphill and provides more power to the pedals on straights. Additionally, a special non-slip logo design ensures even more grip towards the back.Grip design - The grip material on the raised stage provides additional hold towards the back.Biomechanics - The proven SQlab 6OX active saddle technology provides increased efficiency for pedalling, as well as more comfort and less stress on intervertebral discs.The 6OX saddle is equipped with 3 different elastomer dampers that are tailored individually to body weight and can be interchanged as needed.The wave shaped 6OX profile which contours from the rear to the front offers a perfect form-fit shape for most sit bones. The raised back section provides more rearward support and ensures efficient power transmission. The grip material on the raised back provides additional support to the rear. In addition, the saddle cover is robust, especially at the edges.The level and lowered saddle nose applies less pressure to the sensitive areas of men and women alike. For an even better pressure relief, especially on long technical climbs, the saddle nose of the 6OX became a little bit wider, but just as flat and with largest possible surface area. The padding was designed for the specific needs on the E-MTB with perfect dampening properties for rough off-road terrain.Due to these modifications, the 6OX is the ideal saddle for long and steep climbs on the E-MTB and at the same time, even on bikes without an engine, it provides an optimum relief. The wave shaped 6OX profile which contours from the rear to the front offers a perfect form-fit shape for most sit bones.The SQlab active-saddle technology lets the saddle follow the pedalling motion as comfort increases, the vertebral discs are mobilized and pressure on the sit bones is minimised. The correct width saddle is a prerequisite for maximum performance. Available widths: 13 cm/14 cm/15 cm/16cm.
Whether it’s a picnic in the park or an epic multi-day ride in the mountains we believe good storage equals good adventuring. Enter our versatile and tough Coolcave pannier. A 19-litre open pannier in rigid plastic our Coolcave is perfect for carrying everyday essentials purchases or camping gear on bike commutes or trips in the countryside. Easy to clip on and off so you can take the pannier and its contents with you. Adjustable Isofix mountings allow for secure attachment on most bike racks. 19 L cargo capacity. KlickFix mounting system. Made with 50% recycled plastic. Cargo net included. Compatible with Specialized/Fjällräven Cave Pack Cave Pack Tote and Cave Lid Pack. Dimensions: 420 x 340 x 240mm.
Built for those who simplify and go the Cave Tote is our minimalist accessory for your Coolcave. A large main pocket lets you fill the tote with items big and small perfect for trips to the supermarket picnics and everything in between. The tote lifts out of the Coolcave to bring with you into the store gym or wherever. 20L capacity. Double handles with adjustable shoulder strap. Small interior zip pocket. Expandable interior cinch closure. Compatible with Coolcave pannier. Large Specialized/Fjällräven logo print.
Roll-top waterproof pack bag that will keep your gear clean and dry. Made from waterproof recycled nylon fabric and designed to fit the Specialized/Fjällräven Seatbag Harness (art.no 23242). Valve to release air so contents can be compressed after the bag is closed. Part of the Specialized/Fjällräven series for urban rides and bikepacking adventures. Roll-top closure and taped seams keep water out. Light waterproof fabric in 100% recycled nylon 210D. Air-release valve for easy compression. Note- Do not submerge. 100% polyamide 210D
Roll-top waterproof pack bag that will keep your gear clean and dry. Made from waterproof recycled nylon fabric and designed to fit the Specialized/Fjällräven Seatbag Harness (art.no 23242). Valve to release air so contents can be compressed after the bag is closed. Part of the Specialized/Fjällräven series for urban rides and bikepacking adventures. Roll-top closure and taped seams keep water out. Light waterproof fabric in 100% recycled nylon 210D. Air-release valve for easy compression. Note- Do not submerge. 100% polyamide 210D
20-Litre waterproof pack bag designed specifically for the Specialized/Fjällräven Cool Cave pannier (art.no 23234). Made from waterproof recycled nylon that together with the roll-top closure and taped seams reliably protects your gear in wet weather. Valve to release air so contents can be compressed after the bag is closed. Part of the Specialized/Fjällräven series for urban rides and bikepacking adventures. Roll-top closure and taped seams keep water out. Lightweight waterproof fabric in 100% recycled nylon 210D. Air-release valve for easy compression. Volume- 20 L 100% polyamide 210D
Two-way zippered frame bag with a large opening for easy access to biking essentials. It has a sturdy reliable seven-point Velcro attachment and the pack is made from durable Vinylon with a recycled nylon lining and foam-padded sides that help maintain its shape. Inside mesh pockets keep track of smaller items. Seams are not taped but the lining is waterproof. Part of the Specialized/Fjällräven series for urban rides and bikepacking adventures. Weather-resistant design in Vinylon F with lining in 100% recycled nylon. Sturdy Velcro attachment system. Weather-resistant cable opening on side facing forwards. Plastic stabilizing panel in top section and foam-padded sides and base. Size L dimensions- 54 x 16 x 7 cm