Deda Elementi Gravel100 RHM HandlebarInspired by the design of Deda Elementi’s rider favourite Zero100 road bike model, the Gravel100 RHM Handlebar retains the same drop bar lever positioning but places your hands farther apart for increased control on challenging terrain types. This is thanks to the 12-degree flare on its drops, which ensure you’re ready for anything as your route ahead gets even more challenging. Made from a strong triple butted alloy with a black on black finish, this bar will enhance the looks and performance of any modern gravel or cyclocross (CX) bike.Features:Material: Triple butted alloy 7075 Finish: Black on black (BOB) Drop Shape: Rapid Hand Movement (RHM) Stem Clamp Area Diameter: 31.7mmReach: 75mmDrop: 130mm Drop Flare: 12° Lever Compatibility: Standard 23.8mm drop bar lever clamps Use: Gravel, Cyclocross (CX) Width Measurement: Width measured outside-to-outside at the lever position Aero Bar Compatible: Yes, Deda clip-on bars (eg. Deda Parabolica and fastblack2) GPS Mount attachable: Yes Internal Cable Routing: No Wide centre area for mounting accessories Weight: 260g (42cm)Buy Deda Elementi from Chain Reaction Cycles, the World's Largest Online Bike Store.
Northwave X-Magma Core Cycling ShoesTaking you from mountain bike trails to an e-bike commute to a day of leisure riding, the Northwave X-Magma Core Cycling Shoes are brilliant biking all-rounders. And with Primaloft® insulation, they're just right for cooler weather conditions. The X-Magma Core cycling shoes get treated to a layer of Primaloft® Gold insulation and this makes them particularly good if and when the weather turns colder. While offering superb levels of warmth, the Primaloft® Gold does so without adding too much bulk. Not only warm, but it's also eco-friendly, being derived from recycled materials. And should wetter weather appear then the flexible neoprene Easyfit Climaflex collar at the ankle prevents water seepage while also keeping pedalling mobility optimised.Explorer Sole. Flat Pedal Goodness.Confidence-inspiring pedal grip comes by the way of Northwave's Explorer sole. When you're pedalling, moving and manoeuvring your bike this Michelin rubber sole unit provides just the right level of pedal grip and stiffness to ensure rapid progress. And if you hop off your bike to push up a steep hill or rough trail the traction keeps you safe and secure.SLW2 closure systemThe upper of the X-Magma Core shoes features Northwave's snug-fitting Overlap construction, keeping your foot stable and secure as you apply pressure to the pedals. The upper is adjusted via the brilliantly easy to use SLW2 closure system. This allows you to dial in the fit just how you like it. The micro-adjust dial gives precise control of the fit but then at the end of a ride, a single button release makes it easy to kick off your shoes. Quick. Simple, Durable. Precise.Features:200g of Primaloft® Gold insulationOverlap construction on upperExplorer sole with Michelin rubberSLW2 closure systemFlat pedal compatibleBuy Northwave Footwear from Chain Reaction Cycles, the World's Largest Online Bike Store.
Northwave X-Magma Core Cycling ShoesTaking you from mountain bike trails to an e-bike commute to a day of leisure riding, the Northwave X-Magma Core Cycling Shoes are brilliant biking all-rounders. And with Primaloft® insulation, they're just right for cooler weather conditions. The X-Magma Core cycling shoes get treated to a layer of Primaloft® Gold insulation and this makes them particularly good if and when the weather turns colder. While offering superb levels of warmth, the Primaloft® Gold does so without adding too much bulk. Not only warm, but it's also eco-friendly, being derived from recycled materials. And should wetter weather appear then the flexible neoprene Easyfit Climaflex collar at the ankle prevents water seepage while also keeping pedalling mobility optimised.Explorer Sole. Flat Pedal Goodness.Confidence-inspiring pedal grip comes by the way of Northwave's Explorer sole. When you're pedalling, moving and manoeuvring your bike this Michelin rubber sole unit provides just the right level of pedal grip and stiffness to ensure rapid progress. And if you hop off your bike to push up a steep hill or rough trail the traction keeps you safe and secure.SLW2 closure systemThe upper of the X-Magma Core shoes features Northwave's snug-fitting Overlap construction, keeping your foot stable and secure as you apply pressure to the pedals. The upper is adjusted via the brilliantly easy to use SLW2 closure system. This allows you to dial in the fit just how you like it. The micro-adjust dial gives precise control of the fit but then at the end of a ride, a single button release makes it easy to kick off your shoes. Quick. Simple, Durable. Precise.Features:200g of Primaloft® Gold insulationOverlap construction on upperExplorer sole with Michelin rubberSLW2 closure systemFlat pedal compatibleBuy Northwave Footwear from Chain Reaction Cycles, the World's Largest Online Bike Store.
Northwave X-Magma Core Cycling ShoesTaking you from mountain bike trails to an e-bike commute to a day of leisure riding, the Northwave X-Magma Core Cycling Shoes are brilliant biking all-rounders. And with Primaloft® insulation, they're just right for cooler weather conditions. The X-Magma Core cycling shoes get treated to a layer of Primaloft® Gold insulation and this makes them particularly good if and when the weather turns colder. While offering superb levels of warmth, the Primaloft® Gold does so without adding too much bulk. Not only warm, but it's also eco-friendly, being derived from recycled materials. And should wetter weather appear then the flexible neoprene Easyfit Climaflex collar at the ankle prevents water seepage while also keeping pedalling mobility optimised.Explorer Sole. Flat Pedal Goodness.Confidence-inspiring pedal grip comes by the way of Northwave's Explorer sole. When you're pedalling, moving and manoeuvring your bike this Michelin rubber sole unit provides just the right level of pedal grip and stiffness to ensure rapid progress. And if you hop off your bike to push up a steep hill or rough trail the traction keeps you safe and secure.SLW2 closure systemThe upper of the X-Magma Core shoes features Northwave's snug-fitting Overlap construction, keeping your foot stable and secure as you apply pressure to the pedals. The upper is adjusted via the brilliantly easy to use SLW2 closure system. This allows you to dial in the fit just how you like it. The micro-adjust dial gives precise control of the fit but then at the end of a ride, a single button release makes it easy to kick off your shoes. Quick. Simple, Durable. Precise.Features:200g of Primaloft® Gold insulationOverlap construction on upperExplorer sole with Michelin rubberSLW2 closure systemFlat pedal compatibleBuy Northwave Footwear from Chain Reaction Cycles, the World's Largest Online Bike Store.
This jersey has been designed specifically with the conditions faced by gravel riders in mind. It is the type of jersey that will be comfortable for a long day in the saddle, and offers many extra features that will prove useful to off-grid cyclists. The unique combination of fabrics from Merino wool to recycled Polyester to the lightweight breathable membrane material work to create an exceptional jersey that is ready for anything. The understated look and classy fit give it a casual appearance that will help you feel stylish whether tackling rough double track or wandering through a city center. Specifications Women’s specific cut Produced from Merino bi-component fabric which offers the exceptional natural properties Excellent temperature and odor control, comfortable, itch-free and soft to the touchThree Stretchy and slim fit Designed to take you though the most challenging terrain and conditions Designed by the Isadore team and Martin Velits using his experience from the pro peloton Made in Slovakia Materials Fabric 1 61% Polyester 36% Merino wool 3% Lycra Fabric 2 86% Recycled Polyester 14% Elastane Fabric 3 50% Polyester 20% Polyamide 30% Polyurethane
Although it features drops with a 12-degree flare at the ends for better off-road handling, the Deda Gravel100 RHM bar still boats Deda’s “Rapid Hand Movement” drop shaping. This helps to preserve the brake/shifter lever positions for a more natural hand movement, enhancing your comfort and control. Constructed from tough, yet lightweight triple butted alloy, this bar also features a wide clamping area. This means there’s plenty of room for accessories.
The new e-bike saddle 6OX combines the advantages of the successful saddle models Ergowave and Ergolux. As part of the product development, the shape of the saddle was adapted and perfected for the special use on the E-MTB as well as for the Gravity Bike.Perfect Fit - The correct saddle width is a key for maximum performance. Available widths in cm: 13, 14, 15, 16More free space - less pressure - The proven, outstanding SQlab staged saddle shape with the saddle nose that dips below level also provides more freedom for the 6OX and less pressure, equally so for men and for women.Perfect hold - The SQlab saddle shape with the raised seat surface is already perfectly suited for riding uphill and provides more power to the pedals on straights. Additionally, a special non-slip logo design ensures even more grip towards the back.Grip design - The grip material on the raised stage provides additional hold towards the back.Biomechanics - The proven SQlab 6OX active saddle technology provides increased efficiency for pedalling, as well as more comfort and less stress on intervertebral discs.The 6OX saddle is equipped with 3 different elastomer dampers that are tailored individually to body weight and can be interchanged as needed.The wave shaped 6OX profile which contours from the rear to the front offers a perfect form-fit shape for most sit bones. The raised back section provides more rearward support and ensures efficient power transmission. The grip material on the raised back provides additional support to the rear. In addition, the saddle cover is robust, especially at the edges.The level and lowered saddle nose applies less pressure to the sensitive areas of men and women alike. For an even better pressure relief, especially on long technical climbs, the saddle nose of the 6OX became a little bit wider, but just as flat and with largest possible surface area. The padding was designed for the specific needs on the E-MTB with perfect dampening properties for rough off-road terrain.Due to these modifications, the 6OX is the ideal saddle for long and steep climbs on the E-MTB and at the same time, even on bikes without an engine, it provides an optimum relief. The wave shaped 6OX profile which contours from the rear to the front offers a perfect form-fit shape for most sit bones.The SQlab active-saddle technology lets the saddle follow the pedalling motion as comfort increases, the vertebral discs are mobilized and pressure on the sit bones is minimised. The correct width saddle is a prerequisite for maximum performance. Available widths: 13 cm/14 cm/15 cm/16cm.
The new e-bike saddle 6OX combines the advantages of the successful saddle models Ergowave and Ergolux. As part of the product development, the shape of the saddle was adapted and perfected for the special use on the E-MTB as well as for the Gravity Bike.Perfect Fit - The correct saddle width is a key for maximum performance. Available widths in cm: 13, 14, 15, 16More free space - less pressure - The proven, outstanding SQlab staged saddle shape with the saddle nose that dips below level also provides more freedom for the 6OX and less pressure, equally so for men and for women.Perfect hold - The SQlab saddle shape with the raised seat surface is already perfectly suited for riding uphill and provides more power to the pedals on straights. Additionally, a special non-slip logo design ensures even more grip towards the back.Grip design - The grip material on the raised stage provides additional hold towards the back.Biomechanics - The proven SQlab 6OX active saddle technology provides increased efficiency for pedalling, as well as more comfort and less stress on intervertebral discs.The 6OX saddle is equipped with 3 different elastomer dampers that are tailored individually to body weight and can be interchanged as needed.The wave shaped 6OX profile which contours from the rear to the front offers a perfect form-fit shape for most sit bones. The raised back section provides more rearward support and ensures efficient power transmission. The grip material on the raised back provides additional support to the rear. In addition, the saddle cover is robust, especially at the edges.The level and lowered saddle nose applies less pressure to the sensitive areas of men and women alike. For an even better pressure relief, especially on long technical climbs, the saddle nose of the 6OX became a little bit wider, but just as flat and with largest possible surface area. The padding was designed for the specific needs on the E-MTB with perfect dampening properties for rough off-road terrain.Due to these modifications, the 6OX is the ideal saddle for long and steep climbs on the E-MTB and at the same time, even on bikes without an engine, it provides an optimum relief. The wave shaped 6OX profile which contours from the rear to the front offers a perfect form-fit shape for most sit bones.The SQlab active-saddle technology lets the saddle follow the pedalling motion as comfort increases, the vertebral discs are mobilized and pressure on the sit bones is minimised. The correct width saddle is a prerequisite for maximum performance. Available widths: 13 cm/14 cm/15 cm/16cm.
The new e-bike saddle 6OX combines the advantages of the successful saddle models Ergowave and Ergolux. As part of the product development, the shape of the saddle was adapted and perfected for the special use on the E-MTB as well as for the Gravity Bike.Perfect Fit - The correct saddle width is a key for maximum performance. Available widths in cm: 13, 14, 15, 16More free space - less pressure - The proven, outstanding SQlab staged saddle shape with the saddle nose that dips below level also provides more freedom for the 6OX and less pressure, equally so for men and for women.Perfect hold - The SQlab saddle shape with the raised seat surface is already perfectly suited for riding uphill and provides more power to the pedals on straights. Additionally, a special non-slip logo design ensures even more grip towards the back.Grip design - The grip material on the raised stage provides additional hold towards the back.Biomechanics - The proven SQlab 6OX active saddle technology provides increased efficiency for pedalling, as well as more comfort and less stress on intervertebral discs.The 6OX saddle is equipped with 3 different elastomer dampers that are tailored individually to body weight and can be interchanged as needed.The wave shaped 6OX profile which contours from the rear to the front offers a perfect form-fit shape for most sit bones. The raised back section provides more rearward support and ensures efficient power transmission. The grip material on the raised back provides additional support to the rear. In addition, the saddle cover is robust, especially at the edges.The level and lowered saddle nose applies less pressure to the sensitive areas of men and women alike. For an even better pressure relief, especially on long technical climbs, the saddle nose of the 6OX became a little bit wider, but just as flat and with largest possible surface area. The padding was designed for the specific needs on the E-MTB with perfect dampening properties for rough off-road terrain.Due to these modifications, the 6OX is the ideal saddle for long and steep climbs on the E-MTB and at the same time, even on bikes without an engine, it provides an optimum relief. The wave shaped 6OX profile which contours from the rear to the front offers a perfect form-fit shape for most sit bones.The SQlab active-saddle technology lets the saddle follow the pedalling motion as comfort increases, the vertebral discs are mobilized and pressure on the sit bones is minimised. The correct width saddle is a prerequisite for maximum performance. Available widths: 13 cm/14 cm/15 cm/16cm.
The new e-bike saddle 6OX combines the advantages of the successful saddle models Ergowave and Ergolux. As part of the product development, the shape of the saddle was adapted and perfected for the special use on the E-MTB as well as for the Gravity Bike.Perfect Fit - The correct saddle width is a key for maximum performance. Available widths in cm: 13, 14, 15, 16More free space - less pressure - The proven, outstanding SQlab staged saddle shape with the saddle nose that dips below level also provides more freedom for the 6OX and less pressure, equally so for men and for women.Perfect hold - The SQlab saddle shape with the raised seat surface is already perfectly suited for riding uphill and provides more power to the pedals on straights. Additionally, a special non-slip logo design ensures even more grip towards the back.Grip design - The grip material on the raised stage provides additional hold towards the back.Biomechanics - The proven SQlab 6OX active saddle technology provides increased efficiency for pedalling, as well as more comfort and less stress on intervertebral discs.The 6OX saddle is equipped with 3 different elastomer dampers that are tailored individually to body weight and can be interchanged as needed.The wave shaped 6OX profile which contours from the rear to the front offers a perfect form-fit shape for most sit bones. The raised back section provides more rearward support and ensures efficient power transmission. The grip material on the raised back provides additional support to the rear. In addition, the saddle cover is robust, especially at the edges.The level and lowered saddle nose applies less pressure to the sensitive areas of men and women alike. For an even better pressure relief, especially on long technical climbs, the saddle nose of the 6OX became a little bit wider, but just as flat and with largest possible surface area. The padding was designed for the specific needs on the E-MTB with perfect dampening properties for rough off-road terrain.Due to these modifications, the 6OX is the ideal saddle for long and steep climbs on the E-MTB and at the same time, even on bikes without an engine, it provides an optimum relief. The wave shaped 6OX profile which contours from the rear to the front offers a perfect form-fit shape for most sit bones.The SQlab active-saddle technology lets the saddle follow the pedalling motion as comfort increases, the vertebral discs are mobilized and pressure on the sit bones is minimised. The correct width saddle is a prerequisite for maximum performance. Available widths: 13 cm/14 cm/15 cm/16cm.
The 612 Ergowave Active 2.1 was specifically designed to accommodate the requirements of both competitive and leisure cyclists both on the road or mountain bike. The wave-like shape and raised rear section provides perfect rearward support and an optimal pressure distribution which reaches deep into the body structures resulting in improved power transmission. The lowered nose in combination with the dip provides optimal pressure relief for the perineal area. The flat but slim SQlab MaxContact saddle nose and the firm padding of the 612 were both specifically designed for the needs on the road bike. The SQlab active technology allows the saddle to follow the biomechanical motion when pedalling resulting in increased comfort, mobilisation of the spinal discs and reduced pressure to the sit bones. Perfect fit - For the best performance the fit is crucial. Available widths in 12 / 13 / 14/ 15cmSleek rear & lower saddle nose - The raised back section provides more rearward support and ensures efficient power transmission. The level and lowered saddle nose applies less pressure to the sensitive areas of men and women alike.Centre Dip - The slight dip in the centre of the saddle reduces pressure to the sensitive tissue areas of the perineum.Saving energy - The wave shaped Ergowave profile which contours from the rear to the front offers a perfect form-fit shape for most sit bones. The rider does not need to be seated in an inefficient and tiring sitting position and all energy can be used for forward propulsion.Low and flat - The flat saddle nose has a slight curvature which provides maximum contact area providing and associated reduced pressure. This shape provides a narrow saddle nose which minimizes chafing on the inside of the thighs while pedalling.Relief of the intervertebral discs - SQlab s active saddle technology enables a physiologically correct movement of the pelvis. A rounder pedalling motion is achieved which provides for reduced pressure to the lumbar spine and facet joints. This can contribute to less fatigue and prevention of pain in the lumbar spine.
The 612 Ergowave Active 2.1 was specifically designed to accommodate the requirements of both competitive and leisure cyclists both on the road or mountain bike. The wave-like shape and raised rear section provides perfect rearward support and an optimal pressure distribution which reaches deep into the body structures resulting in improved power transmission. The lowered nose in combination with the dip provides optimal pressure relief for the perineal area. The flat but slim SQlab MaxContact saddle nose and the firm padding of the 612 were both specifically designed for the needs on the road bike. The SQlab active technology allows the saddle to follow the biomechanical motion when pedalling resulting in increased comfort, mobilisation of the spinal discs and reduced pressure to the sit bones. Perfect fit - For the best performance the fit is crucial. Available widths in 12 / 13 / 14/ 15cmSleek rear & lower saddle nose - The raised back section provides more rearward support and ensures efficient power transmission. The level and lowered saddle nose applies less pressure to the sensitive areas of men and women alike.Centre Dip - The slight dip in the centre of the saddle reduces pressure to the sensitive tissue areas of the perineum.Saving energy - The wave shaped Ergowave profile which contours from the rear to the front offers a perfect form-fit shape for most sit bones. The rider does not need to be seated in an inefficient and tiring sitting position and all energy can be used for forward propulsion.Low and flat - The flat saddle nose has a slight curvature which provides maximum contact area providing and associated reduced pressure. This shape provides a narrow saddle nose which minimizes chafing on the inside of the thighs while pedalling.Relief of the intervertebral discs - SQlab s active saddle technology enables a physiologically correct movement of the pelvis. A rounder pedalling motion is achieved which provides for reduced pressure to the lumbar spine and facet joints. This can contribute to less fatigue and prevention of pain in the lumbar spine.