Ride At Your BestThe new KEO 2 Max is the best product that will give you the confidence you need to go beyond your personal limits.The Look design team has completely remodelled the shape of the KEO 2 MAX, giving it a new, slimmed down line yet a wider contact surface, increasing its style and efficiency.Optimized Contact Surface: The pedal’s surface area has substantial symbolic importance. It is part of the brand’s identity and acts as an indelible signature on the product. The contact surface of the new KEO 2 MAX preserves the strong lines on which its history was built. Its width has been increased to 60 mm to provide a larger platform and improved foot stability during pedalling. This creates a feeling of unrivalled comfort not found in any other pedal. We also sought to optimize power transfer thanks to its new 500 mm² of usable surface (+25% increase). The shape of the stainless-steel plate has been revised to match that of the cleat and to keep, regardless of the position of your foot (depending upon the angular float you use), the same amount of contact for consistent performance. Increasing the pedal’s usable contact surface, without any additional weight gain, improves the Power to Weight ratio, making the product even better and allowing you to perform at your best.Improved Spindle Profile: The spindle profile of the new KEO 2 MAX has also been optimized. Built around an oversized «Chromoly Plus» steel axle, it is composed of an axle with an inner ball bearing and a needle roller bearing, located under the contact surface, to handle the load and distribute it optimally.A new component has been added between these two bearings. A serrated washer, previously used to hold the needle roller bearing in place, has been replaced with a conical spacer. This technical solution reduces friction, increases fluidity, and by consequence, decreases the geometrical tolerances of the pedal body and play.The sole purpose of the sum of these improvements has been to guarantee you irreproachable reliability.Key Features:Usage: Recreational to Competition,Body: Carbon,Axle: Chromoly +,Pedal Stack Height + Cleats: 17,3 mm,Contact Surface Area: 500 mm² ,Float: 8 or 12 adjustable spring,Cleats: Kéo Grip Cleats,Pedal Weight: 125 gr (312 gr per pair with cleats and screws),Accessories: A pair of Grey Kéo Grip cleats + screws,Guaranty: 2 years.
Feel The New X-PerienceLook constant desire to innovate and improve your product experience has resulted in a design that is dependable, durable and easy to use. Our new mountain-bike pedal was constructed around a heavy-duty mechanism, is resistant to the negative effects of coming into contact with various external factors (rocks, roots, mud…), and provides consistent and reliable performance over time. Its spindle, equipped with a double weather-resistant seal, has been improved to withstand even the worst conditions you may encounter during your rides. We have remained devoted to the principles that guide us daily. Fewer hassles mean more time to ride, and therefore, more fun.The Best Power To Weight Ratio: All the energy you produce is transferred to your MTB through your pedals. Their role, is therefore, crucial. Look’s objective in this new undertaking was to find solutions that would enable the most efficient transfer of rider power possible. That is why Look has chosen to place the weight/contact surface ratio as the primary factor when defining the product.Generally speaking, the greater the contact surface, the more efficiently energy is transferred. On the other hand, the greater the contact surface, the more the pedal will weigh. The challenge faced by our engineers was therefore, to identify the zones that are useful for energy transmission and then optimize the pedal design in order to limit any that are unused. This task allowed Look to engineer a pedal with the best weight / contact surface ratio on the market.Lateral Contact Support: Lateral contact support guides your foot in finding your pedal and provides you a point of contact even if you have not yet engaged the cleat. This wide contact area prevents your foot from sliding on the pedal body and offers consistent and reassuring support.Mechanism Geometry: The mechanism works regardless of external conditions (in the mud, forces are significantly different from those encountered when dry), more space allows for the shedding of various foreign matter (mud, sand…). These zones give the user a constant and stable feeling of being securely clipped in, in all conditions.Adjustable Tension: An adjustable tension screw allows you to fine-tune the entry/release resistance to your personal skill level.Key Features:Usage: XC Competition and Leisure,Tension: 6 to 14,Body: Carbon,Spindle: Chromoly +,Float 6°,Platform Material: Chromoly,Platform Area: 515 mm²,Platform Width: 60 mm,Stack Height + Cleats: 16,8 mm (10,7 + 6,1 mm),Weight Pedal: 170 g,Weight Pair + Cleats: 444 g,Warranty: 2 years.
The standard Keo cleat has been developed with the goal of minimizing weight and to be a simplified cleat and pedal ensemble, while maintaining compatibility with all shoes on the market. The kinematics function is identical to the standard Delta pedal. Cleat entry and release is secure and efficient.The new Keo Grip is an anti-slip cleat. It is safer for walking and compatible with the complete Keo line. The TPU inserts help keep the cleat in position on the sole side of the cleat and eliminate slip especially with carbon soled shoes, while Looks Position Memory technology allows easy cleat replacement by retaining the position of the previous cleat.
Spare cleats for LOOK's S-Track mountain bike pedal system. LOOK's DCS cleats have been optimally designed for excellent mud dispersal and gives a large contact surface between cleat and pedals. Supplied with wedges to increase or decrease shoe sole/pedal contact, these cleats are compatible with all types of mountain bike soles.. Not compatible with Quartz.
Discover the fun and the benefits of riding with the Kéo Classic 3 clipless pedal.Simple to use, it is possible to adjustment the cleat entry/release tension to low for an easy clip out. Its large and wide contact surface provides excellent pedaling stability.Chromoly spindle for more reliability: The Kéo Classic 3 spindle is made up of an oversized steel axle with miniature ball bearings (12 mm inside x 18 mm outside) and a needle bearing cartridge for improved wear resistance. A spacer is used to hold the needle bearing cartridge in place.A new method of fitting the spindle into the pedal body also ensures the prolonged reliability of our pedals. LOOK spindles are only approved after a rotational test of 2 million cycles at 100tr/min with a load of 90kg on the center of the pedal and an eccentric rotation (creating a shock on each rotation).Look spindles are only approved after a rotational test of 2 million cycles at 100tr/min with a load of 90kg on the center of the pedal and an eccentric rotation (creating a shock on each rotation). This test is far more grueling to the current industry standard, the EN14781.Key Features:Usage: Beginner to advanced,Body: Composite,Axle: Chromoly,Threading: 9/16 X 20 mm,Bearings: 1 Ball bearing, 1 needle bearing cartridge,Pedal Stack Height: 15.7 mm,Distance Pedal Spindle/Crank Arm: 53 mm,Contact Surface Area: 400 mm²,Float: 8 to 12 adjustable spring,Cleats: Kéo Grip Cleats,Angular Movement: 0 °, 4.5 ° or 9 ° according to the cleat colour (Black, Grey, Red),Pedal Weight: 140 gr (348 gr per pair with cleats and screws),Accessories: A pair of Grey Kéo Grip cleats + screws,Guarantee: 2 years.
The X-TRACK EN-RAGE PLUS pedal body is made of forged aluminium. It has a 67 mm wide platform for a 664 mm ² of contact surface. This provides improved stability and support especially at high speed. The pins and ribbed pedal body ensure good grip in all circumstances even when not clipped in. The X-TRACK EN-RAGE PLUS model is perfectly suited to the requirements of the ENDURO rider. Expanding the X-TRACK range. Designed to meet the specific requirements of TRAIL / ENDURO riders : A pedal platform designed to be compatible with market leading shoes. Pins that offer adjustable maximum grip. Clip-in and clip-out made easier thanks to a wide easy to find platform. Built to last a purpose built robust pedal
FEEL THE NEW X-PERIENCELOOK constant desire to innovate and improve your product experience has resulted in a design that is dependable durable and easy to use. Our new mountain-bike pedal was constructed around a heavy-duty mechanism is resistant to the negative effects of coming into contact with various external factors (rocks roots mud…) and provides consistent and reliable performance over time. Its spindle equipped with a double weather-resistant seal has been improved to withstand even the worst conditions you may encounter during your rides. We have remained devoted to the principles that guide us daily. Fewer hassles mean more time to ride and therefore more fun. TECHNOLOGYTHE BEST POWER TO WEIGHT RATIO All the energy you produce is transferred to your MTB through your pedals. Their role is therefore crucial. LOOK’s objective in this new undertaking was to find solutions that would enable the most efficient transfer of rider power possible. That is why LOOK has chosen to place the weight/contact surface ratio as the primary factor when defining the product. Generally speaking the greater the contact surface the more efficiently energy is transferred. On the other hand the greater the contact surface the more the pedal will weigh. The challenge faced by our engineers was therefore to identify the zones that are useful for energy transmission and then optimize the pedal design in order to limit any that are unused. This task allowed LOOK to engineer a pedal with the best weight / contact surface ratio on the market. LATERAL CONTACT SUPPORT Lateral contact support guides your foot in finding your pedal and provides you a point of contact even if you have not yet engaged the cleat. This wide contact area prevents your foot from sliding on the pedal body and offers consistent and reassuring support. MECHANISM GEOMETRY The mechanism works regardless of external conditions (in the mud forces are significantly different from those encountered when dry) more space allows for the shedding of various foreign matter (mud sand…). These zones give the user a constant and stable feeling of being securely clipped in in all conditions. ADJUSTABLE TENSION An adjustable tension screw allows you to fine-tune the entry/release resistance to your personal skill level. FEATURES USE: XC Competition and LeisureTENSION: 6 to 14BODY: AluminiumSPINDLE: Chromoly +FLOAT: 6°PLATFORM MATERIAL: ChromolyPLATFORM AREA: 350 mm²PLATFORM WIDTH: 57 mmSTACK HEIGHT + CLEATS: 168 mm (107 + 61 mm)WEIGHT PEDAL: 195 gWEIGHT PAIR + CLEATS: 494 gGUARANTY: 2 years
FEEL THE NEW X-PERIENCE LOOK constant desire to innovate and improve your product experience has resulted in a design that is dependable durable and easy to use. Our new mountain-bike pedal was constructed around a heavy-duty mechanism is resistant to the negative effects of coming into contact with various external factors (rocks roots mud…) and provides consistent and reliable performance over time. Its spindle equipped with a double weather-resistant seal has been improved to withstand even the worst conditions you may encounter during your rides. We have remained devoted to the principles that guide us daily. Fewer hassles mean more time to ride and therefore more fun. TECHNOLOGY THE BEST POWER TO WEIGHT RATIO All the energy you produce is transferred to your MTB through your pedals. Their role is therefore crucial. LOOK’s objective in this new undertaking was to find solutions that would enable the most efficient transfer of rider power possible. That is why LOOK has chosen to place the weight/contact surface ratio as the primary factor when defining the product. Generally speaking the greater the contact surface the more efficiently energy is transferred. On the other hand the greater the contact surface the more the pedal will weigh. The challenge faced by our engineers was therefore to identify the zones that are useful for energy transmission and then optimize the pedal design in order to limit any that are unused. This task allowed LOOK to engineer a pedal with the best weight / contact surface ratio on the market. LATERAL CONTACT SUPPORT Lateral contact support guides your foot in finding your pedal and provides you a point of contact even if you have not yet engaged the cleat. This wide contact area prevents your foot from sliding on the pedal body and offers consistent and reassuring support. MECHANISM GEOMETRY The mechanism works regardless of external conditions (in the mud forces are significantly different from those encountered when dry) more space allows for the shedding of various foreign matter (mud sand…). These zones give the user a constant and stable feeling of being securely clipped in in all conditions. ADJUSTABLE TENSION An adjustable tension screw allows you to fine-tune the entry/release resistance to your personal skill level. FEATURESUSE: XC Competition and LeisureTENSION: 6 to 14BODY: CarbonSPINDLE: Chromoly +FLOAT: 6°PLATFORM MATERIAL: ChromolyPLATFORM AREA: 515 mm²PLATFORM WIDTH: 60 mmSTACK HEIGHT + CLEATS: 168 mm (107 + 61 mm)WEIGHT PEDAL: 170 gWEIGHT PAIR + CLEATS: 444 gGUARANTY: 2 years
We are proud to present you the new range of GEO TREKKING pedals our new standard when it comes to hybrid pedals featuring one flat and one automatic side. Right now mobility is the word on everyone’s lips. The emergence of E-BIKES is bringing about new forms of simpler more environmentally-friendly mobility sustainably transforming our city centers our roads and our way of getting around. Bolstered by 35 years of experience in the design of pedals LOOK has always striven to respond to these new expectations with a well-considered designed and tested range of products aiming to help and accompany users in their attempts to sustainably change the way they get around. ONE CLIPLESS SIDE… The GEO TREKKING pedal range has been designed to support you in your everyday journeys between office and home in the city on cycle lane amongst traffic or simply when adventure calls and you set off on roads or trails in search of new horizons. Featuring a flat side and a clipless side their versatility means that they can tackle every situation and all conditions providing unparalleled freedom of spirit. The CLIPLESS side is based on a mechanism compliant with the micro cleat standard compatible with SPD cleat. This mechanism features across the entire range and enables simple and secure clip-in and clip-out. The retention adjustment system enables an adjustment from 5 to 10. All the pedals are supplied with the EASY cleat with 30% easier clip-in and more natural multidirectional clip-out offering the possibility of a movement combining rotation and traction. … ONE FLAT SIDE The GEO TREKKING model features a body made from injected composite and lightweight molded spikes thus being suitable for a broad scope of practice. This model is also available in the VISION light version.VISION : THE INNOVATIVE LIGHT SOLUTION Having experienced it ourselves time and again we are aware of the apprehension that cyclists can feel when cycling in heavy traffic. Will drivers see me clearly? Interaction between drivers and cyclists is a key factor when it comes to safety on two wheels. This idea was at the heart of our concerns during the development of the new GEO TREKKING range. And so we came up with the VISION solution. A light simple easy to use and versatile which clips onto your pedal. With a power rating of 15 lumens the VISION light makes you visible from more than 400 meters with an angle of 180° making you visible from the side as well and keep you safe at crossroads. Technology: HYBRID PEDALS = HALF FLAT + HALF CLIPLESSCleat: EASYCleat Standard: SPD COMPATIBLERelease Angle: 13°Retention: 5 - 10Body: COMPOSITETraction: COMPOSITE STUDSSpindle: CHROMOLY +Platform Width: 84mmQ Factor: 56mmWeight (Pedal): 217gWeight Pair + Cleats: 490gLight Included: YES (x 2)Light Mode: 3 (STEADY / FLASH / FLASH ECOBattery Life: UP TO 30 h (FLASH ECO)Light Output: 15 LUMENSBattery: MICRO USB RECHARGEABLE (CABLE PROVIDED)Charging Time: 50 MINBeam Angle: 180°Unit Light Weight: 14g
Look Keo Non-Grip CleatsLook's Keo cleats have been redesigned to make them more durable and provide easier engagement and disengagement than previous generations. They are constructed from tough polyamide with teflon toe and heel inserts, which makes them resistant to breakage and ensures mile after mile of consistent performance.Features: Genuine Look replacement parts Memory clip memorises the exact position of the cleat during cleat replacement Compatible with all Road shoes Includes fixing bolts and washers Weight: 95gBuy Look Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Look Delta Cleats Replacement cleats for Look pedals. Features: Red has 9° float. Black is fixed. Buy Look Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Look Delta Cleats Replacement cleats for Look pedals. Features: Red has 9° float. Black is fixed. Buy Look Components from Chain Reaction Cycles, the World's Largest Online Bike Store.