Micro adjustable seatpin suitable for all road and mountain bikes.Finished in high polish silver, with a low profile top clamp for easy adjustment and too even out clamping forces.
Sleek and lightweight post with an easy access single bolt head assembly.Key Features:2014 aluminiumAluminium single bolt, low-profile head assembly with side accessDiameter: 30.9mmLength: 400mmFinish: gloss/matte black anodised
The Thomson Masterpiece Seatpost is not for everyone. Thomson wanted to create the best seatpost possible without regard to cost. The serious cyclist will want to own the Thomson Masterpiece Seatpost. Masterpiece posts weigh approximately 40 grams less than the same size Elite post. This weight reduction is accomplished while maintaining the strength and durability expected of a Thomson Seatpost. Thomson accomplishes this weight reduction by machining the seatpost all over; including the oval inner diameter. We are able to hold closer tolerances by machining than by extrusion alone. Machining all over an already beautiful design makes the Masterpiece Seatpost a work of art.The tube and head of the Thomson Masterpiece seatpost is integral-machined from one single piece of high strength 7000 series aluminum. The head is not pressed or bonded in. This allows for superior strength and minimum weight allowing higher strength at low weights. Natural ellipse bore inside tube for optimum strength to weight ratio.The Thomson Masterpiece seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts we tested failed catastrophically with the seat and clamp components and sometimes pieces of the tube and head flying off in all directions. Every component of the Masterpiece seatpost is 100 percent American made. This includes all fasteners and forgings.
Key Features:High spec entry level seatpost,2 bolt easy adjustment, low profile clamps,Lightweight aluminium hardware,Butted tube is strong yet lightweight,Forged 6061 heat treated aluminium tube.Specification:Built for XC/Trail,Length 375mm/350mm.Weight 295g (27.2mm).
The Turbine seatpost sets a new standard for a performance aluminum post, featuring our new innovative Hunter head design that presents a rider with easy saddle installation, full adjustability and light weight goodness. The aluminum tube is manufactured from 2014 alloy, offering outstanding fatigue & strength for a lightweight XC and trail post.Key Features:Race Face exclusive new Hunter head design,Simple, lightweight 2 bolt design permits the saddle to be installed without disassembling the head,Thumbscrew tightening system allows quick dial in of the saddle angle by hand,Angled clamp bolts allow easy tool access for hassle free adjustment and tightening,The rubber seatpost grommet fully seals the post to prevent water entering your seat tube,Hunter head is suitable for most rail types 7/8mm alloy rails and 7/9mm carbon,Wide lower cradle gives extra rail support for lightweight saddle rails,Narrow upper cradle increases the amount of forward/back saddle adjustment,Tilt Adjustment 6° up 12° down with Zero offset,The seatpost tube is 3D forged from 2014 heat-treated aluminium for optimal strength to weight ratio.,Race Face's triple butting design maintains strength in critical areas while reducing overall weight.,The tube is anodized & shot peened for increased fatigue life..Specifications:Built For: XC/Trail/AM,Size: 27.2, 30.9, 31.6mm,Length: 400mm,Weight: 260g(30.9).
The new Chester seat post is a durable, no nonsense post that can take on rock gardens and plenty of rough landings while still leaving bills in your pocket for aprés ride festivities.Key Features:Seat tube drawn from 6061 Alloy,Proven dual bolt, multi-adjustable head design.,Shot peened for high impact strength & fatigue resistance.,Length: 325mm,Weight: 231g (31.6),Material: 6061 .
The Next seatpost sets a new standard for a performance carbon post, featuring our new innovative Hunter head design that presents a rider with easy saddle installation, full adjustability and light weight goodness. The carbon tube is engineered & manufactured using Race Face's optimized carbon technology process, offering outstanding strength for a lightweight XC and trail post.Key Features:Features Race Face exclusive new Hunter head design,Simple, lightweight 2 bolt design permits the saddle to be installed without disassembling the head,Thumbscrew tightening system allows quick dial in of the saddle angle by hand,Angled clamp bolts allow easy tool access for hassle free adjustment and tightening,The rubber seatpost grommet fully seals the post to prevent water entering your seat tube,Hunter head is suitable for most rail types 7/8mm alloy rails and 7/9mm carbon,Wide lower cradle gives extra rail support for lightweight saddle rails,Narrow upper cradle increases the amount of forward/back saddle adjustment,Tilt Adjustment 6° up 12° down with Zero offset,The seatpost tube is manufactured using our proven Next optimized carbon technology,The highly tested & engineered unidirectional carbon tube offers outstanding fatigue & impact strength for a lightweight XC post..Specifications:Built For: XC/Trail,Size: 27.2, 30.9 & 31.6mm,Length: 400mm,Weight: 250g (30.9mm).
At only 90 grams, this super-light Ninja pump hides inside your seatpost to keep the clean lines of your bike, while still easily accessed when needed. Its rubber mounting ring secures the pump and the included position indicators keep track of your seat height.Key Features:CNC aluminum barrel and handle,Presta valve compatible head with integrated dust ring ,Fits into ø27.2, ø30.9 or ø31.6 mm round seatposts ,Inflates tyres to 160psi,20.3x2.1x2.1cm ,62g.
Giant Connect Seatpost features a 6061 alloy shaft bonded to a 2D forged 6061 alloy head, with an extra long lower rail clamp suitable for lightweight rails.6061 alloy shaft bonded to 2D forged 6061 alloy head,Extra long lower rail clamp is friendly with lightweight rails,Sizes : 30.9mm x 400mm / 27.2mm x 400mm.
Custom machined alloy sleeve to space 25.4 or 27.2 seatpost to larger seat tube diameters.
The Explorer rack has been designed with a quick release clamp so it can easily be mounted to seat posts between 25.4mm and 31.8mm.The top plate encompasses a luggage strap making it ideal for commuting and trail use.Rear mounting plate supports upto 3 rear lights/reflectors.Max load 10kg..
Updated and improved version of our popular wedge pack. Made from durable 1000 Denier fabric with a high quality quick release mounting system.Positive locking rail F25 fixer allows removal/mount in a snap,Expanding design (Med, Lrg),Includes rain cover (Sml, Med, Lrg),3M reflective strip,Tail light strap,Micro: 12.5x8.5x9.5cm, 0.5L, 77g ,Small: 16.5x10.5x11.8cm, 0.8L, 135g ,Medium: 16.5x10.5x12.3cm, 0.95-1.25L, 152g ,Large: 18.5x11.5x13cm, 1.25-1.65L, 183g.