The Masterpiece is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market. Masterpiece posts weigh approximately 40g less than the same size Elite post. This weight reduction is accomplished while maintaining the strength and durability expected of a Thomson seatpost. Thomson accomplishes this weight reduction by machining the seatpost all over, including the oval inner diameter. It is able to hold closer tolerances by machining than by extrusion alone. Machining over an already beautiful design makes the Masterpiece Seatpost a work of art.Machined 7000 series Aluminium41mm seat rail grip lengthTilt adjustment from -5° to +29°Low profile clampsAvailable in 27.2mm, 30.9mm and 31.6mm diametersCertified to: EN 14766 2006 MTBThe tube and head of the Thomson Masterpiece seatpost is integral machined from one piece of high strength 7000 series aluminium. The head is not pressed or bonded in, allowing for superior strength and minimum weight.We have a long 1.614 inch (41 mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inches shorter than our grip length. The Thomson Masterpiece seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts we tested failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson Masterpiece seatpost has a clamp, head and upper tube strong enough to withstand 325 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 230 foot-lbs of torque. Under severe impact the Thomson Masterpiece seatpost will bend slightly but allow the rider to come to a stop or continue the ride. The Masterpiece seatpost has all parts captive and can easily be attached to a seat without dis-assembly.Very low profile clamps mean no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards.
The Masterpiece is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market. Masterpiece posts weigh approximately 40g less than the same size Elite post. This weight reduction is accomplished while maintaining the strength and durability expected of a Thomson seatpost. Thomson accomplishes this weight reduction by machining the seatpost all over, including the oval inner diameter. It is able to hold closer tolerances by machining than by extrusion alone. Machining over an already beautiful design makes the Masterpiece Seatpost a work of art.Machined 7000 series Aluminium41mm seat rail grip lengthTilt adjustment from -5° to +29°Low profile clampsAvailable in 27.2mm, 30.9mm and 31.6mm diametersCertified to: EN 14766 2006 MTBThe tube and head of the Thomson Masterpiece seatpost is integral machined from one piece of high strength 7000 series aluminium. The head is not pressed or bonded in, allowing for superior strength and minimum weight. We have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inches shorter than our grip length.The Thomson Masterpiece seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts we tested failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson Masterpiece seatpost has a clamp, head, and upper tube strong enough to withstand 325 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 230 foot-lbs of torque. Under severe impact the Thomson Masterpiece seatpost will bend slightly but allow the rider to come to a stop or continue the ride.The Masterpiece seatpost has all parts captive and can easily be attached to a seat without dis-assembly. Very low profile clamps means no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards.
The Thomson Masterpiece Seatpost is not for everyone. Thomson wanted to create the best seatpost possible without regard to cost. The serious cyclist will want to own the Thomson Masterpiece Seatpost. Masterpiece posts weigh approximately 40 grams less than the same size Elite post. This weight reduction is accomplished while maintaining the strength and durability expected of a Thomson Seatpost. Thomson accomplishes this weight reduction by machining the seatpost all over; including the oval inner diameter. We are able to hold closer tolerances by machining than by extrusion alone. Machining all over an already beautiful design makes the Masterpiece Seatpost a work of art.The tube and head of the Thomson Masterpiece seatpost is integral-machined from one single piece of high strength 7000 series aluminum. The head is not pressed or bonded in. This allows for superior strength and minimum weight allowing higher strength at low weights. Natural ellipse bore inside tube for optimum strength to weight ratio.The Thomson Masterpiece seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts we tested failed catastrophically with the seat and clamp components and sometimes pieces of the tube and head flying off in all directions. Every component of the Masterpiece seatpost is 100 percent American made. This includes all fasteners and forgings.
The Thomson Elite seatpost is the standard by which all other seatposts are judged. Forged clamps, integrally machined head, and an elliptically extruded 7000 series aluminum body have made the Elite and the Setback Elite the industry models for strength, light weight and ease of adjustment The Thomson Elite seatpost is the standard by which all other seatposts are judged. Forged clamps, integrally machined head, and an elliptically extruded 7000 series aluminum body make the Elite an industry standard. The 16mm setback option helps give precise fit for a wide range of bikes and riders The Thomson seatpost has a clamp, head, and upper tube strong enough to withstand 350 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 250 foot-lbs of torque. Under severe impact the Thomson seatpost will bend slightly and allow the rider to come to a safe stop or finish the ride. Very low profile clamps means no seat interference as the swivel nuts are down between the seat rails
The adjustability and strength of a Thomson seatpost, now in Titanium.Proven saddle clamps are paired with Titanium hardware. It has a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inches shorter than this grip length.The Thomson seatpost has a clamp, head and upper tube are strong enough to withstand 350 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 250 foot-lbs of torque. Under severe impact the Thomson seatpost will bend slightly and allow the rider to come to a safe stop or finish the ride.The Thomson seatpost has all parts captive and can easily be attached to a seat without dis-assembly.Infinite tilt adjustment minus 5° and plus 29°.Very low profile clamps means no seat interference as the swivel nuts are down between the seat rails.The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards.Impact absorbing clamps in the seatpost will spread and flex on impact to protect seat, rails, and rider. The seats survive heavy impact loads without bending the rails.Key Features: 41mm seat rail grip length., Tilt adjustment between -5° and +29°., Low profile seat clamps., 27.2mm Diameter., Available in 350mm and 410mm lengths..
Tifosi Carbon Fibre SeatpostDesigned with stiffness and strength at its core, Tifosi has built a reliable carbon seatpost, fit for fearless forays through the forest and beyond. Highly-adjustable, it comes with an alloy seatclamp which lets you find the perfect saddle position, allowing for fore and aft adjustments between -5 and +18 degrees. At 350mm long, it provides plenty of height to play with to suit both tall and shorter riders, while the lacquered finish adds durability to this brilliantly customisable mast. Features: Material: 3K Carbon Fibre with alloy saddle clamp Finish: High-quality lacquer Length: 350mm Buy Tifosi Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Attach the TOOO Cycling DVR80 Camera to your aero seat post thanks to the Aero Seat Post Mounting Adaptor. Simply position this adaptor on the aero seat post and place the DVR80 mounting bracket over it to ensure a secure fit.Size: (Height) 63mm (2.48") x (Width) 23mm (0.9") x (Aero Seat post width) 22-30 mm (0.86-1.18")
The Topeak Ninja P Seatpost Pump is versatile enough to fit 27.2, 30.9 & 31.6 mm round seatposts (please note the Ninja P will not fit aero seatposts) and is secured by a rubber mounting ring. The use of a rubber mounting ring and seatpost position indicator cause no stress or damage to the bike and help to keep the clean lines of your bike. Weighing just 62 g the Topeak Ninja P Seatpost Pump is a fantastic addition to any cyclist who wants to be prepared for that inevitable flat and keep the clean look of their bike.
The MondoPack Hydro is an oversized saddlebag for extra large adventures. Two side opening panels provide huge access to all your gear and feature inner mesh pockets to keep items like keys and small tools secure. An external water bottle pocket lets you carry more water on extended trips or serves as an excellent place to keep your lightweight jacket as the weather changes. BAG ATTACHMENT QuickClick® (F25) w/ seatpost strap CAPACITY 1.7 L / 105 ci MATERIAL 1200 denier polyester SEATPOST DIAMETER Fits ø25.4 - ø34.9 mm ADDED FEATURES Water bottle pocket 3M™ reflective stripSafety light clip* 3M™ is a registered trademark of 3M Company. SIZE 32 x 20 x 13 cm / 12.6” x 7.9” x 5.1” WEIGHT 312 g / 10.98 oz MINIMUM CLEARANCE 24 cm (9.4”)
Aero shaped wedge pack with positive locking QR buckle and high strength straps. Large openings swallow up all the things you take with you. Gussets hold the rear flap in place when open. Hard wearing fabric. Features: Expanding design on M & L models for extra capacity•Tail light strap included•1000 Denier Teflon coated fabric•3M Scotchlite reflective safety strip
Listen to your inner voice of adventure. Pack up your gear get on your bike and ride that epic trail. BackLoader is a large capacity seat bag specially designed for bikepackers providing a streamlined way to carry gear without the need for a rear rack. Constructed of lightweight highly water resistant and durable materials it mounts and removes quickly. The upgraded saddle mount system in conjunction with compression straps reduces the pendulum effect associated with large rear payloads providing a comfortable ride for those long miles. An easy access waterproof inner bag is included to keep contents completely dry. CAPACITY 15L / 915 ci MATERIAL Polyethylene / nylon Lightweight durable water repellent and stain resistant BAG ATTACHMENT Hook and loop fastener WATERPROOF RATING 10000 mm (waterproof inner bag) MAX LOAD 5 kg / 11 lb ADDED FEATURE Waterproof inner bagSafety light clipAir release button SIZE 67 (max) x 28 x 18 cm 26.4” x 11” x 7.1” (15 L) WEIGHT 15L: 565 g / 19.93 oz (Black) 508 g / 17.92 oz (Green)
âAn oversized saddlebag with two side opening panels provide huge access to all your gear and feature inner mesh pockets to keep items like keys and small tools secure while riding. Rear zippered panel allow the main compartment to expand providing even more storage when needed. BAG ATTACHMENT Nylon straps / buckle CAPACITY 1.7 L / 105 ci MATERIAL 1200 denier polyester SEATPOST DIAMETER Fits ø25.4 - ø34.9 mm EXPANDING Yes ADDED FEATURES 3M™ reflective strip Safety light clip SIZE 32 x 16 x 13 cm / 12.6” x 6.3” x 5.1” WEIGHT 278 g / 9.79 oz