Brand-X's Ascend Dropper Seatpost was so good they decided to super-size it: the Ascend XL Dropper Seatpost offers longer travel for the long-legged rider or for those who prefer a greater scope of adjustment. Operated easily via a paddle style remote, this aluminium dropper seatpost lets the rider customise their saddle height for the trail ahead. Material: T651-7075 AluminiumBar mounted paddle style remote lever and cable operated internal routingLinkage mechanism eliminates any outer cable pullZero offset, one-piece head/upper shaft with micro adjust clamping mechanismOnly compatible with internally routed bikesLength: 498mmTravel: 170mm or 200mmCable Length: 1.5mFinish: Sand blasted and hard anodisedWarranty: 2 yearsWeight: 595g (w/o cable and shifter (30.9mm)The Ascend Dropper Seatpost set the benchmark for reliability and performance at an excellent price point, a proud tradition that the Ascend XL Dropper Seatpost will carry on. This Brand-X Ascend Dropper Seatpost features an ergonomic remote lever that has been designed to run from where your front shifter normally sits. Ideally suited for those running a 1x chainring transmission without a front derailleur. However, a paddle style shifter is available aftermarket for those who want to use the Ascend XL Dropper Seatpost with a front derailleur and shifter. The seatpost is cable actuated at the bottom of the post via a linkage mechanism which eliminates cable pull/movement, to ensure consistent performance time and time again.
The Ascend Seatpost is only compatible with bikes that can use an internally routed dropper. (Please note that it cannot be converted to external cable actuated.)The seatpost is cable actuated at the bottom of the post via a linkage mechanism which eliminates cable pull/movement, to ensure consistent performance time and time again.The ergonomic shifter style remote lever is designed to be run where your front shifter would normally sit. This means that the Ascend Dropper is ideally suited for those using a 1x chain ring set up; without a front derailleur. However, a paddle style shifter is available aftermarket for those who want to use the Ascend dropper post with a front derailleur and shifter.The Ascend Dropper seatpost sets new standards for reliability and performance at a fantastic price point.Key Features:Bar mounted shifter style remote lever,Infinitely adjustable,Cable operated,Internal routing only,Linkage mechanism eliminates any outer cable pull,Zero Offset Head type,One Piece head/Upper Shaft,Micro Adjust clamping mechanism,30.9mm or 31.6mm Diameter,410mm Length,120mm Travel,Cable Length: 1.5m,Sand Blasted and Hard Anodised Black,2 Year Warranty,550g W/O Cable and Shifter (31.6mm).
Brand-X's Ascend Dropper Seatpost was so good they decided to super-size it: the Ascend XL Dropper Seatpost offers longer travel for the long-legged rider or for those who prefer a greater scope of adjustment. Operated easily via a paddle style remote, this aluminium dropper seatpost lets the rider customise their saddle height for the trail ahead. Material: T651-7075 AluminiumBar mounted paddle style remote lever and cable operated internal routingLinkage mechanism eliminates any outer cable pullZero offset, one-piece head/upper shaft with micro adjust clamping mechanismOnly compatible with internally routed bikesLength: 498mmTravel: 170mm or 200mmCable Length: 1.5mFinish: Sand blasted and hard anodisedWarranty: 2 yearsWeight: 595g (w/o cable and shifter (30.9mm)The Ascend Dropper Seatpost set the benchmark for reliability and performance at an excellent price point, a proud tradition that the Ascend XL Dropper Seatpost will carry on. This Brand-X Ascend Dropper Seatpost features an ergonomic remote lever that has been designed to run from where your front shifter normally sits. Ideally suited for those running a 1x chainring transmission without a front derailleur. However, a paddle style shifter is available aftermarket for those who want to use the Ascend XL Dropper Seatpost with a front derailleur and shifter. The seatpost is cable actuated at the bottom of the post via a linkage mechanism which eliminates cable pull/movement, to ensure consistent performance time and time again.
The Ascend II XL externally routed dropper seatpost offers 170mm of travel. Ideal for taller riders or for those who like the added height adjustment, the Ascend II XL is available in both 30.9 and 31.6 seatpost diameters.AL6061-T6 AluminiumBar mounted remote lever and cable operated external routingLinkage mechanism eliminates any outer cable pullZero Offset one-piece head/ upper shaft with micro adjust clamping mechanismDiameter: 30.9mm or 31.6mmLength: 489mm (shaft is 264mm), Travel: 170mmCable Length: 1.5mFinish: Sand Blasted and Hard Anodised Black2 Year WarrantyWeight: 670g (31.6mm without cable/lever)Building on the success of the original Ascend, Brand- X now offer a long drop externally routed option with the Ascend II XL. The post carries over the reliability and core qualities of the original. Infinitely smooth adjustment and incredible value for money make the Ascend II the go to dropper post for those riders that require external routing.The post comes with an ergonomic 1X lever. The cable is actuated from the mid cap ensuring zero cable movement. For those wishing to run a 2X set up, a right-hand mount 'paddle' lever is available. The Ascend Dropper seatpost set new standards for reliability and performance at a fantastic price point.
Brand-X's Ascend Dropper Seatpost was so good they decided to super-size it: the Ascend XL Dropper Seatpost offers longer travel for the long-legged rider or for those who prefer a greater scope of adjustment. Operated easily via a paddle style remote, this aluminium dropper seatpost lets the rider customise their saddle height for the trail ahead. Material: T651-7075 AluminiumBar mounted paddle style remote lever and cable operated internal routingLinkage mechanism eliminates any outer cable pullZero offset, one-piece head/upper shaft with micro adjust clamping mechanismOnly compatible with internally routed bikesLength: 498mmTravel: 170mm or 200mmCable Length: 1.5mFinish: Sand blasted and hard anodisedWarranty: 2 yearsWeight: 595g (w/o cable and shifter (30.9mm)The Ascend Dropper Seatpost set the benchmark for reliability and performance at an excellent price point, a proud tradition that the Ascend XL Dropper Seatpost will carry on. This Brand-X Ascend Dropper Seatpost features an ergonomic remote lever that has been designed to run from where your front shifter normally sits. Ideally suited for those running a 1x chainring transmission without a front derailleur. However, a paddle style shifter is available aftermarket for those who want to use the Ascend XL Dropper Seatpost with a front derailleur and shifter. The seatpost is cable actuated at the bottom of the post via a linkage mechanism which eliminates cable pull/movement, to ensure consistent performance time and time again.
The Carbon Seatpost from Hope Technology is light but extremely strong making it suitable for most cycling disciplines. From cross country racing to downhill and road bikes, this UK manufactured seatpost is ready for anything. 100% designed, tested and manufactured in Barnoldswick, EnglandSmooth internal surface finish removes any unnecessary resin rich areas to minimise weightVarying wall sections to optimise weight and areas of high stress concentrationsSame ultra-fine seat rail adjustment as tried and proven on our previous Eternity Seatpost15mm layback / Weight: 27.2mm 185g, 30.9mm & 31.6 220gThese seatposts have been built using 24 individual piles of carbon with highly toughened epoxy resin system that delivers a safe, strong and rugged seatpost. The laminate comprises unidirectional T700 fibre which is the highest strength standard fibre available. This provides maximum tensile strength whilst keeping weight to a minimum. This is combined with strategically positioned plies of 3K twill woven fabric, adding hoop strength to resist clamping forces and mitigating failure mode in the event of serious crash damage. The 1K 2x2 twill weave fabric outer ply, also contributes in this respect together with a super smooth finish and striking visual aesthetic.
The Carbon Seatpost from Hope Technology is light but extremely strong making it suitable for most cycling disciplines. From cross country racing to downhill and road bikes, this UK manufactured seatpost is ready for anything. 100% designed, tested and manufactured in Barnoldswick, EnglandSmooth internal surface finish removes any unnecessary resin rich areas to minimise weightVarying wall sections to optimise weight and areas of high stress concentrationsSame ultra-fine seat rail adjustment as tried and proven on our previous Eternity Seatpost15mm layback / Weight: 27.2mm 185g, 30.9mm & 31.6 220gThese seatposts have been built using 24 individual piles of carbon with highly toughened epoxy resin system that delivers a safe, strong and rugged seatpost. The laminate comprises unidirectional T700 fibre which is the highest strength standard fibre available. This provides maximum tensile strength whilst keeping weight to a minimum. This is combined with strategically positioned plies of 3K twill woven fabric, adding hoop strength to resist clamping forces and mitigating failure mode in the event of serious crash damage. The 1K 2x2 twill weave fabric outer ply, also contributes in this respect together with a super smooth finish and striking visual aesthetic.
The Carbon Seatpost from Hope Technology is light but extremely strong making it suitable for most cycling disciplines. From cross country racing to downhill and road bikes, this UK manufactured seatpost is ready for anything. 100% designed, tested and manufactured in Barnoldswick, EnglandSmooth internal surface finish removes any unnecessary resin rich areas to minimise weightVarying wall sections to optimise weight and areas of high stress concentrationsSame ultra-fine seat rail adjustment as tried and proven on our previous Eternity Seatpost15mm layback / Weight: 27.2mm 185g, 30.9mm & 31.6 220gThese seatposts have been built using 24 individual piles of carbon with highly toughened epoxy resin system that delivers a safe, strong and rugged seatpost. The laminate comprises unidirectional T700 fibre which is the highest strength standard fibre available. This provides maximum tensile strength whilst keeping weight to a minimum. This is combined with strategically positioned plies of 3K twill woven fabric, adding hoop strength to resist clamping forces and mitigating failure mode in the event of serious crash damage. The 1K 2x2 twill weave fabric outer ply, also contributes in this respect together with a super smooth finish and striking visual aesthetic.
The Carbon Seatpost from Hope Technology is light but extremely strong making it suitable for most cycling disciplines. From cross country racing to downhill and road bikes, this UK manufactured seatpost is ready for anything. 100% designed, tested and manufactured in Barnoldswick, EnglandSmooth internal surface finish removes any unnecessary resin rich areas to minimise weightVarying wall sections to optimise weight and areas of high stress concentrationsSame ultra-fine seat rail adjustment as tried and proven on our previous Eternity Seatpost15mm layback / Weight: 27.2mm 185g, 30.9mm & 31.6 220gThese seatposts have been built using 24 individual piles of carbon with highly toughened epoxy resin system that delivers a safe, strong and rugged seatpost. The laminate comprises unidirectional T700 fibre which is the highest strength standard fibre available. This provides maximum tensile strength whilst keeping weight to a minimum. This is combined with strategically positioned plies of 3K twill woven fabric, adding hoop strength to resist clamping forces and mitigating failure mode in the event of serious crash damage. The 1K 2x2 twill weave fabric outer ply, also contributes in this respect together with a super smooth finish and striking visual aesthetic.
The Carbon Seatpost from Hope Technology is light but extremely strong making it suitable for most cycling disciplines. From cross country racing to downhill and road bikes, this UK manufactured seatpost is ready for anything. 100% designed, tested and manufactured in Barnoldswick, EnglandSmooth internal surface finish removes any unnecessary resin rich areas to minimise weightVarying wall sections to optimise weight and areas of high stress concentrationsSame ultra-fine seat rail adjustment as tried and proven on our previous Eternity Seatpost15mm layback / Weight: 27.2mm 185g, 30.9mm & 31.6 220gThese seatposts have been built using 24 individual piles of carbon with highly toughened epoxy resin system that delivers a safe, strong and rugged seatpost. The laminate comprises unidirectional T700 fibre which is the highest strength standard fibre available. This provides maximum tensile strength whilst keeping weight to a minimum. This is combined with strategically positioned plies of 3K twill woven fabric, adding hoop strength to resist clamping forces and mitigating failure mode in the event of serious crash damage. The 1K 2x2 twill weave fabric outer ply, also contributes in this respect together with a super smooth finish and striking visual aesthetic.
The Carbon Seatpost from Hope Technology is light but extremely strong making it suitable for most cycling disciplines. From cross country racing to downhill and road bikes, this UK manufactured seatpost is ready for anything. 100% designed, tested and manufactured in Barnoldswick, EnglandSmooth internal surface finish removes any unnecessary resin rich areas to minimise weightVarying wall sections to optimise weight and areas of high stress concentrationsSame ultra-fine seat rail adjustment as tried and proven on our previous Eternity Seatpost15mm layback / Weight: 27.2mm 185g, 30.9mm & 31.6 220gThese seatposts have been built using 24 individual piles of carbon with highly toughened epoxy resin system that delivers a safe, strong and rugged seatpost. The laminate comprises unidirectional T700 fibre which is the highest strength standard fibre available. This provides maximum tensile strength whilst keeping weight to a minimum. This is combined with strategically positioned plies of 3K twill woven fabric, adding hoop strength to resist clamping forces and mitigating failure mode in the event of serious crash damage. The 1K 2x2 twill weave fabric outer ply, also contributes in this respect together with a super smooth finish and striking visual aesthetic.
The Hollowgram SL 27 KNOT Carbon Seatpost uses Cannondale’s SAVE (System Active Vibration Elimination) technology to provide a more comfortable ride along with an aerodynamic truncated airfoil D-shaped design. The head has two bolts which give the ability to make precise angle adjustments and the seatpost is compatible with bikes from Cannondale’s 2019 and 2020 generation SuperSix EVO and CAAD13 ranges. FEATURES Material: Carbon fibre 330mm long SAVE technology Two-bolt head design for micro-adjustment Compatible with 2019 and 2020 generation SuperSix EVO and CAAD13 bikes Claimed manufacturer weight: 162 grams