The Masterpiece is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market. Masterpiece posts weigh approximately 40g less than the same size Elite post. This weight reduction is accomplished while maintaining the strength and durability expected of a Thomson seatpost. Thomson accomplishes this weight reduction by machining the seatpost all over, including the oval inner diameter. It is able to hold closer tolerances by machining than by extrusion alone. Machining over an already beautiful design makes the Masterpiece Seatpost a work of art.Machined 7000 series Aluminium41mm seat rail grip lengthTilt adjustment from -5° to +29°Low profile clampsAvailable in 27.2mm, 30.9mm and 31.6mm diametersCertified to: EN 14766 2006 MTBThe tube and head of the Thomson Masterpiece seatpost is integral machined from one piece of high strength 7000 series aluminium. The head is not pressed or bonded in, allowing for superior strength and minimum weight. We have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inches shorter than our grip length.The Thomson Masterpiece seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts we tested failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson Masterpiece seatpost has a clamp, head, and upper tube strong enough to withstand 325 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 230 foot-lbs of torque. Under severe impact the Thomson Masterpiece seatpost will bend slightly but allow the rider to come to a stop or continue the ride.The Masterpiece seatpost has all parts captive and can easily be attached to a seat without dis-assembly. Very low profile clamps means no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards.
The Masterpiece is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market. Masterpiece posts weigh approximately 40g less than the same size Elite post. This weight reduction is accomplished while maintaining the strength and durability expected of a Thomson seatpost. Thomson accomplishes this weight reduction by machining the seatpost all over, including the oval inner diameter. It is able to hold closer tolerances by machining than by extrusion alone. Machining over an already beautiful design makes the Masterpiece Seatpost a work of art.Machined 7000 series Aluminium41mm seat rail grip lengthTilt adjustment from -5° to +29°Low profile clampsAvailable in 27.2mm, 30.9mm and 31.6mm diametersCertified to: EN 14766 2006 MTBThe tube and head of the Thomson Masterpiece seatpost is integral machined from one piece of high strength 7000 series aluminium. The head is not pressed or bonded in, allowing for superior strength and minimum weight.We have a long 1.614 inch (41 mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inches shorter than our grip length. The Thomson Masterpiece seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts we tested failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson Masterpiece seatpost has a clamp, head and upper tube strong enough to withstand 325 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 230 foot-lbs of torque. Under severe impact the Thomson Masterpiece seatpost will bend slightly but allow the rider to come to a stop or continue the ride. The Masterpiece seatpost has all parts captive and can easily be attached to a seat without dis-assembly.Very low profile clamps mean no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards.
The Masterpiece is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market. Masterpiece posts weigh approximately 40g less than the same size Elite post. This weight reduction is accomplished while maintaining the strength and durability expected of a Thomson seatpost. Thomson accomplishes this weight reduction by machining the seatpost all over, including the oval inner diameter. It is able to hold closer tolerances by machining than by extrusion alone. Machining over an already beautiful design makes the Masterpiece Seatpost a work of art.Machined 7000 series Aluminium41mm seat rail grip lengthTilt adjustment from -5° to +29°Low profile clampsAvailable in 27.2mm, 30.9mm and 31.6mm diametersCertified to: EN 14766 2006 MTBThe tube and head of the Thomson Masterpiece seatpost is integral machined from one piece of high strength 7000 series aluminium. The head is not pressed or bonded in, allowing for superior strength and minimum weight. We have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inches shorter than our grip length.The Thomson Masterpiece seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts we tested failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson Masterpiece seatpost has a clamp, head, and upper tube strong enough to withstand 325 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 230 foot-lbs of torque. Under severe impact the Thomson Masterpiece seatpost will bend slightly but allow the rider to come to a stop or continue the ride.The Masterpiece seatpost has all parts captive and can easily be attached to a seat without dis-assembly. Very low profile clamps means no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards.
The Topeak Tubi-Master is a complete tubeless tyre repair / CO2 inflation kit. Contents consist of tubeless repair tools with four tyre plugs stored inside a machined pod, and a MicroAirBooster CO2 inflator head secured to a mounting module that can be strapped to a frame tube or seatpost.Please note that this is supplied without a CO2 canister, but compatible with both 16 gram and 25g threaded canisters.
The Topeak Tubi Master+ Compact Repair Kit is a compact, all-in-one tubeless tyre repair kit and CO2 inflator. Tyre reamer, serrated knife and plug insertion tools fold away into tool body while a special concealed compartment holds repair plugs and repair strip storage. Perfect to take with you on every ride.CO2 inflator fits Presta & SchraderChrome vanadium steel 2-in-1 tyre reamer / plug insertion toolChrome vanadium steel serrated knife3 x 3.5mm x 5cm repair plugsFrame/tube mounting bracket with adjustable nylon strapStorage for a single 16g or 25g CO2 cartridge (not included)12x6.8x2.3cm180g
Micro-sized tubeless tyre repair and inflation kit. Featuring an advanced 2-in-1 CO2 injector head that repairs a puncture and inflates the tubeless tyre in one step. The repair tools cleverly store inside the CO2 inflator for maximum space saving.Advanced 2-in-1 CO2 inflator compatible with Presta and Schrader valvesStainless steel 2-in-1 tyre reamer / plug insertion toolDisc pad spacer insert5x 3.5mm x 5cm repair plugsAluminium constructionFrame/tube mounting bracket with adjustable nylon strap with space for up to 2 CO2 cartridges12.3x6x5.8cm213g1 x 25g CO2 Cartridge included
Micro-sized tubeless tyre repair and inflation kit. Featuring an advanced 2-in-1 CO2 injector head that repairs a puncture and inflates the tubeless tyre in one step. The repair tools cleverly store inside the CO2 inflator for maximum space saving.Advanced 2-in-1 CO2 inflator compatible with Presta and Schrader valvesStainless steel 2-in-1 tyre reamer / plug insertion toolDisc pad spacer insert5x 3.5mm x 5cm repair plugsAluminium constructionFrame/tube mounting bracket with adjustable nylon strap with space for up to 2 CO2 cartridges12.3x6x5.8cm213g*CO2 Cartridges not included
The Topeak Road Masterblaster is a modern take on the classic frame-fit pump. Long machine-cut aluminium barrel inflates road tyres quickly and comes in 4 sizes to fit most road bike frames.Durable aluminium thumb lockMachine cut, sleek aluminium barrel; durable and lightweightInflates to 160psiS - Frame size 43-49cm (17.1x1.7x1.2'')M - Frame size 49-54cm (19x1.7x1.2'')L - Frame size 54-59cm (21.1x1.7x1.2'')
The Topeak Road Masterblaster is a modern take on the classic frame-fit pump. Long machine-cut aluminium barrel inflates road tyres quickly and comes in 4 sizes to fit most road bike frames.Durable aluminium thumb lockMachine cut, sleek aluminium barrel; durable and lightweightInflates to 160psiS - Frame size 43-49cm (17.1x1.7x1.2'')M - Frame size 49-54cm (19x1.7x1.2'')L - Frame size 54-59cm (21.1x1.7x1.2'')
The Lezyne Tubeless CO2 Blaster is an innovative 2-in-1 cycling CO2 dispenser and tubeless tyre repair kit that simultaneously inflates and seals tubeless tyres. CO2 dispenserTubeless tyre repair kitMachined aluminiumHardened steel reamerCNC-machined twist knobAluminium canister holds the five included tyre plugs and safely stores the reamer when not in useHigh quality tyre plugsSleek, compact designTwo kit options: Two 20-gram CO2 cartridges or no cartridges, and a simple Velcro strapMachined aluminium construction is both lightweight and highly durable. Hardened steel reamer scours hole, inserts plug and inflates tyre for an efficient and rapid repair. CNC-machined twist knob manually controls release of CO2 gas. Aluminium canister holds the five included tyre plugs and safely stores the reamer when not in use. High quality tyre plugs aggressively seal holes that are too large to be sealed by sealant alone (hole size varies from tyre to tyre). Sleek, compact design fits in a pocket or straps to your bike.
The Lezyne Tubeless CO2 Blaster is an innovative 2-in-1 cycling CO2 dispenser and tubeless tyre repair kit that simultaneously inflates and seals tubeless tyres. CO2 dispenserTubeless tyre repair kitMachined aluminiumHardened steel reamerCNC-machined twist knobAluminium canister holds the five included tyre plugs and safely stores the reamer when not in useHigh quality tyre plugsSleek, compact designTwo kit options: Two 20-gram CO2 cartridges or no cartridges, and a simple Velcro strapMachined aluminium construction is both lightweight and highly durable. Hardened steel reamer scours hole, inserts plug and inflates tyre for an efficient and rapid repair. CNC-machined twist knob manually controls release of CO2 gas. Aluminium canister holds the five included tyre plugs and safely stores the reamer when not in use. High quality tyre plugs aggressively seal holes that are too large to be sealed by sealant alone (hole size varies from tyre to tyre). Sleek, compact design fits in a pocket or straps to your bike.
Occam Designs' Apex Frame Strap brings to the trail a sleek design and incredible functionality. Safely and securely carry all of your repair equipment and rest assured that it'll be there, ready and waiting, whenever you need it.Perfect for strapping a tube, multi-tool or puncture repair kit to your frameMade from abrasion & tear resistant RipstopBOA L6 FIT SYSTEM provides fast & effortless mountingAdjusts to fit nearly any bike - safe to use on carbon framesLightweight at just 28 gramsThe Apex uses VX-21 Diamond Ripstop - One of the most advanced textiles in the world with virtually unmatched abrasion and tear resistance per gram weight. No matter what terrain you enter, you can be sure the Apex will withstand years of use. Tightening everything together is an easy to use BOA L6 Fit System with angled and grooved edges for better grip.The Apex also has a Releasable Lace Guide with an open back design allows release of a lace loop for a fast exit, giving you rapid access to all it's contents. The BOA System also means the Apex can adjust to fit nearly any bike in existence and is safe to use on carbon, aluminium, steel and titanium frames. The Apex's Occy Pre-load Strap also makes installing your choice of inflation, tyre levers, multi-tool and tube fast and easy. If you want a sleek, minimalist frame strap for your bike, the Occam Designs Apex is the perfect choice.