The Supreme rear cassette hub features a left/right switchable driver, allowing you to run either left hand or right hand drive using the same hub and driver. This is combined with a heat treated 14mm cromo axle and precision sealed bearings, all at a great price. When ordering let us know whether you would like this hub setup RHD or LHD in the special instructions. ###section### Product Specs HUB TYPE:Cassette AXLE:14mm Male DRIVER:9t SPOKE HOLES:36h WEIGHT:526g / 18.55oz
The Stranger Ballast rear cassette hub uses the proven internals and driver from the Primo Mix hub for great reliability. The Hub Features a 6061 Aluminium hub shell spinning around a heat treated Crmo axle with precision sealed bearings and a polymer Driver Bearing with 4 Pawls. Comes with primo hub guards. ###section### Product Specs HUB TYPE:Cassette AXLE:14mm Male DRIVER:9t SPOKE HOLES:36h WEIGHT:587g / 20.7oz
G-Sport introduces the Roloway Cassette hub. This RHD/LHD compatible hub features a modern slim shape along with all the durability you've come to expect from a G-Sport hub. ###section### Product Specs HUB TYPE:Cassette AXLE:17mm 4130 chromoly female axle DRIVER:9T driver with 3-Pawl independent spring design and precision caged needle bearings SPOKE HOLES:36 WEIGHT:480g with guard, 436g without
Assorted sticker pack from S&M featuring around 15 stickers including shields, fork stickers and other goodies.
Reversible crossbar pad from Sunday. Pick a side, rep Sunday, look cool.
Overview “AC-2” = Dual Angular Contact. This describes the use of both angular contact bearings&and&angled bearing cups/hub bores used in the hub design. The AC-2 hub features revolutionary bearing installation and function never seen before in a bicycle hub. It has been designed from the ground up for ease of maintenance and optimal bearing performance. The AC-2 Cassette Hub also offers changeable pawl/spring configurations for varying points of driver engagement to suit a rider’s personal preference. Here are a few key points of the AC-2 BMX Cassette Hub: -The AC-2 hubs use 20mm Angular Contact bearings with a wave spring pre-load. Bearings are pressed into tapered cups that mate with the angled bores machined into the hub shell. This design feature allows bearing/cup to be easily installed and removed from hub shell&without&any special tools. No more presses or hammers needed! Another attribute of the tapered bearing cup/angled hub shell bore design is how the bearings seat in the hub. The bearings/cups on each side of the hub shell are in&perfect&alignment with each other! This ensures superior bearing performance and less chance of premature wear. -Hub shell and driver literally “float” on the axle. The only force on the bearings is supplied by the wave spring(which delivers the appropriate bearing pre-load needed for angular contact bearings). Tightening of axle bolts has absolutely no affect on the bearings! -The bearings, wave spring, and shim(s) are secured on the axle by one retaining ring. The only tool used to assemble/disassemble the AC-2 hub is a pair of snap ring pliers! -The AC-2 hub cassette driver is also unique. It allows for changeable P.O.E.(points of engagement). The hub driver comes standard with 6 pawls and springs. This option offers 96 P.O.E. -Maximum engagement. The other choice is to use just 3 pawls and springs. P.O.E. is reduced to 48 and minimal drag is achieved. This is a rider preference choice and both have a unique sound! -The proprietary Profile Racing 10 spline aluminum cassette body allows you to use Profile's standard steel, Elite, or aluminum cogs ranging from 12t to 18t. ###section### Product Specs HUB TYPE:&Cassette AXLE:&Female Bolts DRIVER:&Choose In Basket SPOKE HOLES:&36h WEIGHT:&370g / 13.05oz
Enjoy 14 assorted Hoffman Bikes sticker pack. Receive 2 of each design shown in photo.
Freshen up that kit with an assorted Cinema BMX sticker pack!
For more than seven years, Box Founder Toby Henderson has been trying to build a reliable 20mm, cassette hub without creating a new cassette standard. The problem was fitting durable bearings between the cassette body and the oversize axle. The rear Quantum hub overcomes this by using the type of one piece driver commonly found on freestyle hubs. Each hubset includes a 1 piece, 16 tooth driver supported by 3 large, roller bearings. Inside the driver are 6 pawls, each with 2 teeth that engage a 60 tooth ratchet ring, meaning the hub has just 6° of engagement. The end result is a higher performing hub with fewer dead spots and less drag than others on the market. Quantum front hubs are available only with 20mm axles, but the rears can be easily converted between 10mm, 15mm and 20mm axles. Each set includes a front and rear 20mm set-up. Additional spacers are included. ###section### Product Specs HUB TYPE:Cassette AXLE:20mm DRIVER:16t chromoly SPOKE HOLES:36h WEIGHT:162g/5.7oz (front), 595g /21oz (rear w/o axles)
OVERVIEW “AC-2” = Dual Angular Contact. This describes the use of both angular contact bearings&and&angled bearing cups/hub bores used in the hub design. The AC-2 hub features revolutionary bearing installation and function never seen before in a bicycle hub. It has been designed from the ground up for ease of maintenance and optimal bearing performance. The AC-2 Cassette Hub also offers changeable pawl/spring configurations for varying points of driver engagement to suit a rider’s personal preference. HERE ARE A FEW KEY POINTS OF THE AC-2 BMX DISC BRAKE CASSETTE HUB: -The AC-2 hubs use 20mm Angular Contact bearings with a wave spring pre-load. Bearings are pressed into tapered cups that mate with the angled bores machined into the hub shell. This design feature allows bearing/cup to be easily installed and removed from hub shell&without&any special tools. No more presses or hammers needed! Another attribute of the tapered bearing cup/angled hub shell bore design is how the bearings seat in the hub. The bearings/cups on each side of the hub shell are in&perfect&alignment with each other! This ensures superior bearing performance and less chance of premature wear. -Hub shell and driver literally “float” on the axle. The only force on the bearings is supplied by the wave spring(which delivers the appropriate bearing pre-load needed for angular contact bearings). Tightening of axle bolts has absolutely no affect on the bearings! -The bearings, wave spring, and shim(s) are secured on the axle by one retaining ring. The only tool used to assemble/disassemble the AC-2 hub is a pair of snap ring pliers! -The AC-2 hub cassette driver is also unique. It allows for changeable P.O.E.(points of engagement). The hub driver comes standard with 6 pawls and springs. This option offers 96 P.O.E. -Maximum engagement. The other choice is to use just 3 pawls and springs. P.O.E. is reduced to 48 and minimal drag is achieved. This is a rider preference choice and both have a unique sound! -The proprietary Profile Racing 10 spline aluminum cassette body allows you to use Profile's standard steel, Elite, or aluminum cogs ranging from 12t to 18t. -ISO Standard 6 bolt disc brake mount.