With a multi-panel construction for added comfort and a perfectly-sized visor to shield your eyes from the sun and rain, the dhb Cycling Cap is the ideal accessory to keep you cycling all year around. Finished in stylish graphics and colours, it can be styled to give a finishing touch to any kit choice.
An ASSOS-favorite summer sock returning with a longer 18cm cuff height contrasting griffe graphic and its proven breathable composition. We wanted to make a lightweight summer sock that could work with every collection merging its proven breathable composition with a taller cuff height. Due to the socks’ ultralight yarns we recommend wearing them for the hottest training days and multi-hour rides. 90%PA 10%EA
The Mudder Mini offers minimal interference while protecting what is important. The Detour edition of Mudder Mini has also been given an upgraded material thickness for sturdiness. Key Features: Protecting face and headset bearings, Mounts easy and securely with antislip straps , Fits all stiff cross/gravel forks, Super lightweight, only 21 grams, Keeps spray from you handlebar bags,.The Mudder Mini offers minimal interference while protecting what is important. Not only is your headset and face protected but it will also do a very good job of keeping your handlebar bag clean and dry. The Detour edition of Mudder Mini has also been given an upgraded material thickness for sturdiness.Most bikepacking gear is not 100% waterproof and a good set of fenders can save you from the misery of having a wet sleeping bag or clothes at the end of the day. Even if your gear is fully waterproof, you will appreciate the lack of mud on your bags when you stop to get a jacket out or when you bring them into the tent after a rough day in the saddle. The full kit adds less than 85 grams to your total weight, making it ideal for ultralight bikepacking. Specification: Measures: 90 x170 mm (effective), Weight: 21 g , Material: 0.8 mm PP (Polypropylene),. Fit: The MUDDER Mini will fit all gravel/cx forks with clearance for tire widths between 32 mm up to 55 mm. It will not work on a road fork with narrow clearance or for fat bikes. The correct position is about 10 mm above the tire. Aligning the position to the tire and not the fork crown increases efficiency and is made possible by our custom hook and loop straps. Make sure that the mudguard doesn't touch your down tube when turning the handlebar. Purpose: This mudguard is specifically designed to block dirt from being thrown forward and potentially impair your vision during high speed riding and the wellness of your lower headset bearings. It will not protect you from general spray coming from your front tire or your feett and lower legs. Adjustable anti-slip 2-in-1 hook and loop straps: The specially designed straps have enough friction to prevent the mudguard from sliding down on a conic fork leg. However, it needs to be tighten firmly to stay up. The open ended design of the strap will allow you to adjust the length and thereby center the position of the ASS SAVERS logo on the fork leg. You can also inverse the strap if you prefer to have a no-logo appearance. Pre-folding: The secret to transforming a flat piece of plastic into a functioning product lies in the pre-folding prior to use. All the scoring lines have been carefully engineered to achieve locking mechanisms, self centering abilities, spring loading and material endurance. Please take the time to properly read the instructions to ensure the best performance.
The Lezyne shallow brass bell is a modern, unique low-profile bell made from high-polished brass.The Lezyne classic shallow brass bell is a modern, unique low-profile design made from high-polished brass, mounted to a machined aluminium base. The brass striker politely and effectively alerts others with a sharp, definitively loud ring. A simple O-ring attaches the Lezyne shallow bell to a variety of tube sizes and shapes, elegantly complementing all styles of bikes. Key Features: Brass bell., Modern, unique low-profile design.,High-polished brass.,Machined aluminium base., Brass striker..
The Lezyne classic brass bell is a classic bell constructed from high-polish brass.The Lezyne brass bell is a compact, classic shape constructed from modern, high quality materials. The bell itself is made from high-polished brass, mounted to a machined aluminium base. The small brass striker provides a sharp, impressively loud ring when flicked, warning others of your presence. A simple O-ring attaches this Lezyne bell to a variety of tube sizes and shapes while integrating cleanly with any bicycle. Key Features: Compact, classic shape.,Modern, high quality materials.,High-polished brass.,Machined aluminium base.,Brass striker., Weight: Small 21g, Medium 28g.
An SRAM Bottom Bracket Shield and Wave Washer. Assy PressFit GXP Road / BB30 Bearing .
Key Features:Removes cassette lock-rings of Campagnolo compatible cassettes,With kraton handle for a firm and comfortable grip .
As the gravel segment expands, cyclists face new challenges. The issue of having dirt thrown in your face is a well known problem among mountain bikers. With huge clearances for wide tires in the front fork, gravel riders are now facing a similar issue."This one is a win for sure. ...it seems to outperform every other mini front fender I have tried." Cory Benson, BikerumorWhile mountain bikers are used to mud, gravel bikers face a different challenge. Anyone who has ridden on a wet gravel road is familiar with the mixture of fine sand and water that seems to be designed especially to seek and destroy bearings, not to mention what it does to your eyes on a long ride.The MUDDER Mini is here to offer relief for your face and headset bearing. Simply mount it to your fork legs just above your front tire and you will dramatically reduce the amount of spray in the critical areas. The MUDDER Mini attaches with innovative adjustable anti-slip straps to guarantee an instant and perfect fit on all fork sizes.Protecting face and headset bearings,Mounts easy and securely with antislip straps ,Fits all cross/gravel forks,Super lightweight, only 21 grams,Suitable for tire widths 32-55 mm,.Key Features:Technical data,Measures: 90 x170 mm (effective),Weight: 21 g ,Material: 0.8 mm PP (Polypropylene),.Fit The MUDDER Mini will fit all gravel/cx forks with clearance for tire widths between 32 mm up to 55 mm. It will not work on a road fork with narrow clearance or for fat bikes. The correct position is about 10 mm above the tire. Aligning the position to the tire and not the fork crown increases efficiency and is made possible by our custom hook and loop straps. Make sure that the mudguard doesn't touch your down tube when turning the handlebar.Purpose This mudguard is specifically designed to block dirt from being thrown forward and potentially impair your vision during high speed riding and the wellness of your lower headset bearings. It will not protect you from general spray coming from your front tire or your feet and lower legs.Adjustable anti-slip 2-in-1 hook and loop straps The specially designed straps have enough friction to prevent the mudguard from sliding down on a conic fork leg. However, it needs to be tighten firmly to stay up. The open ended design of the strap will allow you to adjust the length and thereby center the position of the ASS SAVERS logo on the fork leg. You can also inverse the strap if you prefer to have a no-logo appearance. Pre-folding The secret to transforming a flat piece of plastic into a functioning product lies in the pre-folding prior to use. All the scoring lines have been carefully engineered to achieve locking mechanisms, self centering abilities, spring loading and material endurance. Please take the time to properly read the instructions to ensure the best performance.
The all new FENDOR BENDOR Regular is a great option for those truly wet moments when you wish you had a fully protecting mudguard. It attaches with no tools, to virtually every bike in just a few seconds. Still foldable, it can easily be stored in a bag or jersey pocket for wet weather deployment.Universal fitWith the newly developed attachment construction, FENDOR BENDOR Regular is now completely self supported and therefore possible to mount on bikes without the sideway support of the seat stays or the support of a brake bridge. You could also mount it above your caliper brake to avoid interference with the brake.For streets and roadsThe FENDOR BENDOR Regular has been adapted to fit the smaller and more delicate tubing of road and urban bikes. It has a slightly slimmer profile than its predecessor that will look at home on everything from your vintage track bike to your hyper modern carbon road bike. It remains folded in two places to keep the compact folded state of the previous generation that easily slips into a jersey pocket or backpack.Easy to mount, no tools required ,Fits almost all bikes,Super lightweight, only 50 grams,Longlasting, durable materials,Made in Sweden,.Key Features:Technical data,Measures: 540x65 mm (effective),Weight: 50 g ,Material: 1 mm PP (Polypropylene),.Fit The Fendor Bendor fits all frames with standard seat stays. It's self supportive and doesn't require support from the brake bridge or the seat stays. It can also be mounted directly on a seat post (as low as possible for best effect). The Fendor Bendor will not fit if you have monostay frame or center pull brake.Prefold The scoring lines along the fender need to be folded hard in order to give the it the necessary rigidity and strength. Take extra care to fold down the outer edges to make sure your Fendor Bendor is functioning properly.Frame protection Each Fendor Bendor is delivered with a small set of transparent 3M polyurethane protection stickers. Use these to protect your seat stays from scratches from the fender.Storage The Fendor Bendor can always be folded back into a small package for storage in a bag or jersey pocket.
Lightweight CNC alloy with short thread for MXRC Cassette hub. CNC machined lightweight aluminium. Only suitable for MXRC cassette hub.
Fenwicks Professional Carbon Fibre Assembly PasteThe advanced formula in Fenwicks’ Assembly Paste is ideal for professional and home mechanics when installing expensive carbon fibre components. It’s grip-enhancing polybeads help you to obtain the security of a firm hold. Plus, as you’ll obtain the grip you need easier, you’ll avoid damaging carbon fibre bike frames or components by overtightening.Features: Ideal for carbon-to-carbon or carbon-metal interfaces Clear paste with polybeads Stops slippage and creaking Long lasting Non-staining Non-smeary Long applicator nozzle, so no need for a grease gun, no mess when applied Packaging is non-porous so zero risk of contamination Easy to store - hang it up or stand it up Ideal size for a toolbox Buy Fenwicks Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Cassette Lockring Tool FR-5.2Enjoy quick and simple removal and installation of cassette lockrings with this handy tool from Park Tool. Designed to be hassle-free, this lockring tool is suitable for use with a variety of cassette lockrings, making it a versatile essential for any cycle workshop.Easy and Efficient Lockring RemovalDurably built from heat-treated alloy tool steel, for daily garage and workshop use, the Park Tool Cassette Lockring Tool FR-5.2 has a thin wall construction, with 12 splines for accurate engagement with similarly splined lockrings. Specially designed to make the job easy, there is no need to remove cones and locknuts when using this fantastic bit of kit.Sized perfectly to be used with a lockring wrench or bench vice for extra leverage, the tool is compatible with a range of cassette lockrings including Shimano, SRAM, and Chris King, and some Shimano disc brake lockrings. With the Park Tool Cassette Lockring Tool FR-5.2 in your toolbox, you will never be short of work. Features: Material: Heat Treated Alloy Tool Steel Compatibility: Shimano, SRAM (including 1x), SunRace, SunTour, Chris King, and other cassette lockrings + some Shimano disc brake lockrings Size: 1" base with 12 splines (approximately 23.4mm across), 12mm centre bore for axle clearance Note for Usage: Hold the tool in place with a quick-release skewer and have it snug to cogs when loosening. Use the axle nut for solid axles.Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.