Brand-X's Ascend Dropper Seatpost was so good they've decided to roll it out to the masses. The Ascend CX Dropper Seatpost is ideal for cyclocross, gravel, and road cyclists who feel the need to tweak their seatpost as they ride for customisable comfort.Smooth and Reliable Dropper SeatpostOperated easily via a paddle style remote on either side of your cockpit, the aluminium CX Dropper Seatpost is easily installed on bikes with internal cable routing. Cable actuated at the bottom of the dropper post via a linkage mechanism, the Brand-X dropper post eliminates cable pull/movement for a smooth and reliable performance.The Ascend Dropper Seatpost set the benchmark for reliability and performance at an excellent price point, a proud tradition that the Ascend CX Dropper Seatpost will carry on. Key Features:Material: T651-7075 Aluminium,Bar mounted paddle style remote lever and cable operated internal routing,Linkage mechanism eliminates any outer cable pull,Zero offset, one-piece head/upper shaft with micro adjust clamping mechanism,Only compatible with internally routed bikes,Length: 458mm,Travel: 150mm,Cable Length: 1.5m,Finish: Sand blasted and hard anodised,Warranty: 2 years,.
Brand-X Ascend CX Dropper Seatpost (85 & 105mm)As it has been so popular with mountain bikers, Brand-X has now made its Ascend dropper seatpost available for drop bar enthusiasts too. This particular model adopts the smaller 27.2mm diameter as used on road, gravel and CX bikes, plus has a shorter travel range to suit the type of riding that these bikes are for. As long as your frame has dropper post internal cable routing, you can now easily tweak your riding position on the move for increased comfort and pedalling efficiency.Smooth and Reliable Dropper SeatpostOperated easily via a paddle style remote on either side of your cockpit, the aluminium CX Dropper Seatpost is easily installed on bikes with internal cable routing. Cable actuated at the bottom of the dropper post via a linkage mechanism, the Brand-X dropper post eliminates cable pull/movement for a smooth and reliable performance. The Ascend Dropper Seatpost set the benchmark for reliability and performance at an excellent price point, a proud tradition that the Ascend CX Dropper Seatpost will carry on.Reasons to Buy: Designed for drop bar enthusiasts. 27.2mm diameter for road, gravel and CX use. Shorter travel range. Internal cable routing for a clean look.Features: Material: T651-7075 Aluminium Bar mounted paddle style remote lever and cable operated internal routing (included) Linkage mechanism eliminates any outer cable pull Zero offset, one-piece head/upper shaft with micro adjust clamping mechanism Only compatible with internally routed bikes Seatpost Diameter: 27.2mm Overall Length: 85mm: 350mm; 105mm: 400mm Cable Length: 1.5m Lever Diameter: To fit 31.8mm handlebars Finish: Sand blasted and hard anodised Warranty: 2 years Rider Weight: Min: 50-55kg; Max: 120kg Weight: 530g (85mm travel, w/o cable and paddle)Minimum Insertion Length Information: Size Minimum Insertion Length Minimum Insertion Length including the actuator (mm) 27.2mm x 350mm 85mm 100 134 27.2mm x 400mm 105mm 120 154 Manufacturer's Reference Codes: 400mm/105mm/27.2mm: BRNDXDRPCX272400105; 350mm/85mm/27.2mm: BRNDXDRPCX27235085Buy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Building on the success of the Ascend 01, Brand-X now offer a shorter drop 27.2mm diameter option. The 27.2mm diameter makes it an ideal option for CX, Gravel or Road riders who want to feel the benefit of a dropper. The post carries over the reliability and core qualities of the Ascend 01. Infinitely smooth adjustment and incredible value for money makes the Ascend CX the go to option for cylcocross riders. The Ascend Seatpost is only compatible with bikes that can use an internally routed dropper. (Please note that it cannot be converted to external cable actuated.)The seatpost is cable actuated at the bottom of the post via a linkage mechanism which eliminates cable pull/movement, to ensure consistent performance time and time again. The ergonomic paddle style remote lever is designed to be on either left or right hand side of your bars. The Ascend Dropper seatpost sets new standards for reliability and performance at a fantastic price point. Minimum Insertion Length Information Size Minimum Insertion Length Minimum Insertion Length including the actuator (mm) 27.2mm x 350mm 85mm 100 134 27.2mm x 400mm 105mm 120 154
Brand-X's Ascend Dropper Seatpost was so good they've decided to roll it out to the masses. The Ascend CX Dropper Seatpost is ideal for cyclocross, gravel, and road cyclists who feel the need to tweak their seatpost as they ride for customisable comfort.Material: T651-7075 AluminiumBar mounted paddle style remote lever and cable operated internal routingLinkage mechanism eliminates any outer cable pullZero offset, one-piece head/upper shaft with micro adjust clamping mechanismOnly compatible with internally routed bikesLength: 458mmTravel: 150mmCable Length: 1.5mFinish: Sand blasted and hard anodisedWarranty: 2 yearsOperated easily via a paddle style remote on either side of your cockpit, the aluminium CX Dropper Seatpost is easily installed on bikes with internal cable routing. Cable actuated at the bottom of the dropper post via a linkage mechanism, the Brand-X dropper post eliminates cable pull/movement for a smooth and reliable performance. The Ascend Dropper Seatpost set the benchmark for reliability and performance at an excellent price point, a proud tradition that the Ascend CX Dropper Seatpost will carry on.
Brand-X's Ascend Dropper Seatpost was so good they've decided to roll it out to the masses. The Ascend CX Dropper Seatpost is ideal for cyclocross, gravel, and road cyclists who feel the need to tweak their seatpost as they ride for customisable comfort.Material: T651-7075 AluminiumBar mounted paddle style remote lever and cable operated internal routingLinkage mechanism eliminates any outer cable pullZero offset, one-piece head/upper shaft with micro adjust clamping mechanismOnly compatible with internally routed bikesLength: 458mmTravel: 150mmCable Length: 1.5mFinish: Sand blasted and hard anodisedWarranty: 2 yearsOperated easily via a paddle style remote on either side of your cockpit, the aluminium CX Dropper Seatpost is easily installed on bikes with internal cable routing. Cable actuated at the bottom of the dropper post via a linkage mechanism, the Brand-X dropper post eliminates cable pull/movement for a smooth and reliable performance. The Ascend Dropper Seatpost set the benchmark for reliability and performance at an excellent price point, a proud tradition that the Ascend CX Dropper Seatpost will carry on.
Brand-X Ascend Dropper Assembly Grease (50ml)Recommended by the manufacturer, this dropper post-specific grease will breathe new life into your Ascend seatpost. Using this grease will bring back that smooth travel for accurate height control to quickly get you into the perfect riding position.Service Guide Information:Click here to view the Brand-X Ascend II 105, 125 External Route Dropper Post Service Guide.Click here to view the Brand-X Ascend II 150, 170 External Route Dropper Post Service Guide.Click here to view the Brand-X Internal Dropper Post 100, 125 Service Guide.Click here to view the Brand-X Internal Dropper Post 150, 170, 200 Service Guide.Features: Compatibility: Brand-X Ascend dropper seatpost Size: 50mlBuy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Recommended assembly grease for use on the Brand-X Ascend dropper posts. Service Guide Information Click here to view the Brand-X Ascend II 105, 125 External Route Dropper Post Service Guide. Click here to view the Brand-X Ascend II 150, 170 External Route Dropper Post Service Guide. Click here to view the Brand-X Internal Dropper Post 100,125 Service Guide. Click here to view the Brand-X Internal Dropper Post 150, 170, 200 Service Guide.
Brand-X Ascend Dropper Cable Sleeve and Barrel The exact parts you need should you need make some repairs your Brand-X dropper seatpost, this Ascend cable fittings spares pack is a genuine Brand-X replacement, so you can rest assured that they will be compatible with your Ascend dropper seatpost. It includes 3 cable nut sleeves and 3 grub screw barrels.Features: Compatibility: Brand-X Ascend dropper seat post Genuine Brand-X spare parts Contains: 3x cable nut sleeves, 3x grub screw barrelsBuy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Available in both internally and externally routed options, this replacement cartridge is perfect for helping you repair and maintain your Brand-X Ascend dropper seat post. Each cartridge is unique to each travel option and cartridges are not cross-compatible, so it is important to ensure that you marry up the correct cartridge to the routing and the travel of your Brand-X Ascend post. Service Guide Information Click here to view the Brand-X Ascend II 105, 125 External Route Dropper Post Service Guide. Click here to view the Brand-X Ascend II 150, 170 External Route Dropper Post Service Guide. Click here to view the Brand-X Internal Dropper Post 100,125 Service Guide. Click here to view the Brand-X Internal Dropper Post 150, 170, 200 Service Guide.
The Ascend Seatpost is only compatible with bikes that can use an internally routed dropper. (Please note that it cannot be converted to external cable actuated.)The seatpost is cable actuated at the bottom of the post via a linkage mechanism which eliminates cable pull/movement, to ensure consistent performance time and time again.The ergonomic shifter style remote lever is designed to be run where your front shifter would normally sit. This means that the Ascend Dropper is ideally suited for those using a 1x chain ring set up; without a front derailleur. However, a paddle style shifter is available aftermarket for those who want to use the Ascend dropper post with a front derailleur and shifter.The Ascend Dropper seatpost sets new standards for reliability and performance at a fantastic price point.Key Features:Bar mounted shifter style remote lever,Infinitely adjustable,Cable operated,Internal routing only,Linkage mechanism eliminates any outer cable pull,Zero Offset Head type,One Piece head/Upper Shaft,Micro Adjust clamping mechanism,30.9mm or 31.6mm Diameter,410mm Length,120mm Travel,Cable Length: 1.5m,Sand Blasted and Hard Anodised Black,2 Year Warranty,550g W/O Cable and Shifter (31.6mm).
Brand-X Ascend Dropper Seatpost (100, 125 & 150)Precisely engineered to bring you fast and smooth operation on the trails, the Ascend dropper post will get you into the optimum riding position in a flash. This means you'll be primed for the upcoming terrain so you can attack a climb or descent without having to stop to change your saddle position. Designed for MTB frames with dropper post internal routing, it will give a clean look to your bike too.Ergonomic Dropper SeatpostThis mountain bike dropper seatpost features an ergonomic remote lever that has been designed to run from where your front shifter normally sits. It's ideally suited for those running a 1x chainring transmission without a front derailleur.Your bike's frame must have internal dropper post routing for seamless compatibility with this dropper seatpost. To eliminate cable movement/pull, the smooth operating Brand-X Ascend 120mm & 150mm MTB Dropper Seatpost has been cable actuated at the end of the seatpost to deliver consistent performance.Remotes supplied are suitable for MTB flat bars with a 22.2mm diameter. 1x fits in place of the front shifter on left side and 2x fits perpendicular to the bar beside the grip on either side. For CX bikes that need a 31.8mm bar, this can be found here.Reasons to Buy: Incredibly fast and smooth operation. Gives you an optimum riding position. Internal cable routing for a clean look. Effortlessly remote operated.Features: Material: AL7075-T651 Diameter: 30.9mm or 31.6mm Size: 410mm or 480mm Length/Travel: 100mm, 120mm or 150mm Cable Length: 1.5m Finish: Sand Blasted and Hard Anodised Black Warranty: 2 Years Compatibility: Frames with dropper post internal cable routing only Remote Included: Yes, bar mounted shifter style remote lever Infinitely adjustable Cable operated Internal routing only Linkage mechanism eliminates any outer cable pull Zero Offset Head type One Piece head/Upper Shaft Micro Adjust clamping mechanism Rider Weight: Min: 50-55kg; Max: 120kg Weight: 550g (without cable and shifter, 31.6mm)Please Note: The "Size" information relates to the seatpost's overall length. To know which size to buy, measure your current seatpost's length and diameterMinimum Insertion Length Information: Size Minimum Insertion Length Minimum Insertion Length including the actuator (mm) 31.6mm x 357mm 100mm 90 124 30.9mm x 357mm 100mm 90 124 31.6mm x 412mm 125mm 90 124 30.9mm x 412mm 125mm 90 124 31.6mm x 459mm 150mm 90 124 30.9mm x 459mm 150mm 90 124 Service Guide Information:Click here to view the Brand-X Internal Dropper Post 100, 125 Service Guide.Click here to view the Brand-X Internal Dropper Post 150, 170, 200 Service Guide.Installation Guide Information:Click here to view the Brand-X Ascend Internal Route Post Installation Guide.Manufacturer's Reference Codes: 120mm 31.6mm 410mm: BRNDXDRP01412316120; 120mm 30.9mm 410mm: BRNDXDRP01412309120; 150mm 31.6mm 480mm: BRNDXDRP01480316150; 150mm 30.9mm 480mm: BRNDXDRP01480309150; 125mm 30.9mm 412mm: BRNDXDRP0123412309125; 150mm 30.9mm 459mm: BRNDXDRP0123459309150; 125mm 31.6mm 412mm: BRNDXDRP0123412316125; 150mm 31.6mm 459mm: BRNDXDRP0123459316150Buy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X Ascend Dropper Seatpost (100, 125 & 150)Precisely engineered to bring you fast and smooth operation on the trails, the Ascend dropper post will get you into the optimum riding position in a flash. This means you'll be primed for the upcoming terrain so you can attack a climb or descent without having to stop to change your saddle position. Designed for MTB frames with dropper post internal routing, it will give a clean look to your bike too.Ergonomic Dropper SeatpostThis mountain bike dropper seatpost features an ergonomic remote lever that has been designed to run from where your front shifter normally sits. It's ideally suited for those running a 1x chainring transmission without a front derailleur.Your bike's frame must have internal dropper post routing for seamless compatibility with this dropper seatpost. To eliminate cable movement/pull, the smooth operating Brand-X Ascend 120mm & 150mm MTB Dropper Seatpost has been cable actuated at the end of the seatpost to deliver consistent performance.Remotes supplied are suitable for MTB flat bars with a 22.2mm diameter. 1x fits in place of the front shifter on left side and 2x fits perpendicular to the bar beside the grip on either side. For CX bikes that need a 31.8mm bar, this can be found here.Reasons to Buy: Incredibly fast and smooth operation. Gives you an optimum riding position. Internal cable routing for a clean look. Effortlessly remote operated.Features: Material: AL7075-T651 Diameter: 30.9mm or 31.6mm Size: 410mm or 480mm Length/Travel: 100mm, 120mm or 150mm Cable Length: 1.5m Finish: Sand Blasted and Hard Anodised Black Warranty: 2 Years Compatibility: Frames with dropper post internal cable routing only Remote Included: Yes, bar mounted shifter style remote lever Infinitely adjustable Cable operated Internal routing only Linkage mechanism eliminates any outer cable pull Zero Offset Head type One Piece head/Upper Shaft Micro Adjust clamping mechanism Rider Weight: Min: 50-55kg; Max: 120kg Weight: 550g (without cable and shifter, 31.6mm)Please Note: The "Size" information relates to the seatpost's overall length. To know which size to buy, measure your current seatpost's length and diameterMinimum Insertion Length Information: Size Minimum Insertion Length Minimum Insertion Length including the actuator (mm) 31.6mm x 357mm 100mm 90 124 30.9mm x 357mm 100mm 90 124 31.6mm x 412mm 125mm 90 124 30.9mm x 412mm 125mm 90 124 31.6mm x 459mm 150mm 90 124 30.9mm x 459mm 150mm 90 124 Service Guide Information:Click here to view the Brand-X Internal Dropper Post 100, 125 Service Guide.Click here to view the Brand-X Internal Dropper Post 150, 170, 200 Service Guide.Installation Guide Information:Click here to view the Brand-X Ascend Internal Route Post Installation Guide.Manufacturer's Reference Codes: 120mm 31.6mm 410mm: BRNDXDRP01412316120; 120mm 30.9mm 410mm: BRNDXDRP01412309120; 150mm 31.6mm 480mm: BRNDXDRP01480316150; 150mm 30.9mm 480mm: BRNDXDRP01480309150; 125mm 30.9mm 412mm: BRNDXDRP0123412309125; 150mm 30.9mm 459mm: BRNDXDRP0123459309150; 125mm 31.6mm 412mm: BRNDXDRP0123412316125; 150mm 31.6mm 459mm: BRNDXDRP0123459316150Buy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.