Redshift's Quick-Release Alloy Aerobars are different than any other aerobars on the market. The patent-pending quick-release mechanism allows you to attach or remove the aerobars from 31.8mm handlebars in a few seconds, without any tools, allowing you to choose the best setup for every single ride. The quick-release mechanism allows you to attach or remove aerobars in a few seconds, with no tools required to remove or attach the aerobars. The aerobars always attach in the same orientation and have a secondary safety release mechanism prevents accidental release. The Quick-Release Aerobars offer massive adjustability that lets you fine-tune your fit; extension length, armpad fore-aft, armpad width you can adjust them all to get yourself in the perfect position. If you want to get yourself in the perfect aero position on the bike, you need Redshift's Quick-Release Alloy Aerobars! Includes Handlebar Clamps, Quick-Release Mechanisms, Alloy Aerobar Extensions, Armrest, and Armrest Pads.
Redshift's Quick-Release Carbon Aerobars are different than any other aerobars on the market. The patent-pending quick-release mechanism allows you to attach or remove the aerobars from 31.8mm handlebars in a few seconds, without any tools, allowing you to choose the best setup for every single ride. The quick-release mechanism allows you to attach or remove aerobars in a few seconds, with no tools required to remove or attach the aerobars. The aerobars always attach in the same orientation and have a secondary safety release mechanism prevents accidental release. The Quick-Release Aerobars offer massive adjustability that lets you fine-tune your fit; extension length, armpad fore-aft, armpad width you can adjust them all to get yourself in the perfect position. If you want to get yourself in the perfect aero position on the bike, you need Redshift's Quick-Release Carbon Aerobars! Includes Handlebar Clamps, Quick-Release Mechanisms, Carbon Aerobar Extensions, Armrest, and Armrest Pads.
The Thomson Elite DH bar is 800mm wide with 20mm of rise, 9° of back sweep, and 5° of upsweep. It s built using 7050 Aluminium alloy for strength and long life. 65mm wide clamping area fits our Direct Mount stem, giving you the most torsional stiffness of any bar/stem combination. 31.8 centre section is absolutely straight over a width of 90mm. The long straight section in the middle reduces stress concentrations, especially when using wide Direct Mount stems.800mm width / 31.8mm7050 Aluminium AlloyLong, straight middle sectionThickened ends from 1.4mm to 1.6mmDeveloped by Hydraulic Press FormingLow weight, high fatigue lifePerfect with Thomson Elite X4 or Direct Mount StemsWeight 325gBars are butted and tapered in many steps for optimal fatigue life. Ends of the bar are thickened from 1.4 to 1.6mm to resist damage from impacts and contact with the ground. Bars are produced by advanced Hydraulic Press Forming to avoid the need for hand grinding. Almost all other bars are manually bent, and bends are ground to appear smooth. Hydraulic Press Forming ensures very consistent wall thickness and close tolerances, especially in tapered sections. This keeps weight low and fatigue life high. Together with a Thomson stem, this is the best Aluminium cockpit you can get. It s the perfect addition to your Elite X4 Stem or Direct Mount Stem.
Identical in alloy and construction to Thomson s Downhill bar, the new Trail bar is 750mm wide with 20mm of rise, 8° of back sweep, and 5° of up sweep. The clamping area is 50mm, allowing a different bend profile for a more compliant ride. The Trail bar gives you a light Aluminium all-around bar for your Mountain Bike.750mm width / 31.8mm7050 Aluminium AlloyVery durable and extremely strongThickened ends from 1.4 to 1.6mmDeveloped by Hydraulic Press FormingLightweightPerfect addition to Thomson's Elite X4 Stem or Direct Mount Stem
The Dirt Drop Handlebars are Aluminium drop bars that bring the performance and dependability you have come to expect from Thomson. The line-up is available in 3 profiles and varying widths, each made from 7000 series aluminium. Borrowing from the proven carbon profiles, the alloy drop bars are available with a mild flat, a round profile, or new to Thomson, the Flared Drop bar.Available in 44cm and 46cm widths130mm Drop90mm Reach31.8mm Clamp25 degree Flare7000 series AluminiumThe road bar wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without locking out your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way. The Dirt Drop shares a similar top to the round road bar, measuring 31.8 as wide as possible. Each profile has exceeded the ISO 4210-2:2015 requirement. The Dirt Drop is available in 44cm, and 46cm, with 25° flare, Drop 130mm, Reach 90mm ready for your next adventure, regardless of the road you choose.
The Dirt Drop Handlebars are Aluminium drop bars that bring the performance and dependability you have come to expect from Thomson. The line-up is available in 3 profiles and varying widths, each made from 7000 series aluminium. Borrowing from the proven carbon profiles, the alloy drop bars are available with a mild flat, a round profile, or new to Thomson, the Flared Drop bar.Available in 44cm and 46cm widths130mm Drop90mm Reach31.8mm Clamp25 degree Flare7000 series AluminiumThe road bar wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without locking out your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way. The Dirt Drop shares a similar top to the round road bar, measuring 31.8 as wide as possible. Each profile has exceeded the ISO 4210-2:2015 requirement. The Dirt Drop is available in 44cm, and 46cm, with 25° flare, Drop 130mm, Reach 90mm ready for your next adventure, regardless of the road you choose.
Thomson s new 35mm x 800mm wide bar comes in 3 rise options: a centre rise 10mm, 20mm, or 35mm rise options. All 35mm bars feature a 9° back sweep and 5° upsweep. They re built using 7050 Aluminium alloy for strength and longevity.Centre Rise: 10mm, 20mm and 25mmBack sweep: 9 degreesUpsweep: 5 degrees7050 AluminiumButted & tapered for optimal fatigue lifeAdvanced Hydraulic Press formingThe Elite 35mm Handlebars are butted and tapered in many steps for optimal fatigue life. Unlike most companies, Thomson produced our bars by using advanced hydraulic press forming to ensure close tolerances, precise wall thicknesses and a smooth appearance in the bends and tapered sections. Together with a 35mm Thomson X4 stem, it s the best Aluminium cockpit in the industry.
Thomson s new 35mm x 800mm wide bar comes in 3 rise options: a centre rise 10mm, 20mm, or 35mm rise options. All 35mm bars feature a 9° back sweep and 5° upsweep. They re built using 7050 Aluminium alloy for strength and longevity.Centre Rise: 10mm, 20mm and 25mmBack sweep: 9 degreesUpsweep: 5 degrees7050 AluminiumButted & tapered for optimal fatigue lifeAdvanced Hydraulic Press formingThe Elite 35mm Handlebars are butted and tapered in many steps for optimal fatigue life. Unlike most companies, Thomson produced our bars by using advanced hydraulic press forming to ensure close tolerances, precise wall thicknesses and a smooth appearance in the bends and tapered sections. Together with a 35mm Thomson X4 stem, it s the best Aluminium cockpit in the industry.
Thomson s new 35mm x 800mm wide bar comes in 3 rise options: a centre rise 10mm, 20mm, or 35mm rise options. All 35mm bars feature a 9° back sweep and 5° upsweep. They re built using 7050 Aluminium alloy for strength and longevity.Centre Rise: 10mm, 20mm and 25mmBack sweep: 9 degreesUpsweep: 5 degrees7050 AluminiumButted & tapered for optimal fatigue lifeAdvanced Hydraulic Press formingThe Elite 35mm Handlebars are butted and tapered in many steps for optimal fatigue life. Unlike most companies, Thomson produced our bars by using advanced hydraulic press forming to ensure close tolerances, precise wall thicknesses and a smooth appearance in the bends and tapered sections. Together with a 35mm Thomson X4 stem, it s the best Aluminium cockpit in the industry.
The Thomson Carbon Fibre drop bars bring the performance and dependability you have come to expect from Thomson. The line-up is available in 3 profiles and varying widths, each made from Carbon Fibre produced by Toray and uses tailor-made Nano Epoxy Resin for very high impact resistance. Available in 44cm and 46cm widths130mm Drop90mm Reach31.8mm Clamp25 degree FlareToray grade Carbon FibreThe wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without locking out your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way. The Dirt Drop shares a similar top to the round road bar, measuring 31.8 as wide as possible. Each profile has exceeded the ISO 4210-2:2015 requirement.The Dirt Drop is available in 44cm, and 46cm, with 25° flare, Drop 130mm, Reach 90mm ready for your next adventure, regardless of the road you choose.
The Thomson Carbon Fibre drop bars bring the performance and dependability you have come to expect from Thomson. The line-up is available in 3 profiles and varying widths, each made from Carbon Fibre produced by Toray and uses tailor-made Nano Epoxy Resin for very high impact resistance. Available in 44cm and 46cm widths130mm Drop90mm Reach31.8mm Clamp25 degree FlareToray grade Carbon FibreThe wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without locking out your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way. The Dirt Drop shares a similar top to the round road bar, measuring 31.8 as wide as possible. Each profile has exceeded the ISO 4210-2:2015 requirement.The Dirt Drop is available in 44cm, and 46cm, with 25° flare, Drop 130mm, Reach 90mm ready for your next adventure, regardless of the road you choose.
The BBB Clearskin Frame Protectors helps to prevent damage caused by repeated contacts among the bike s parts and frame. Quick and easy to install the protectors are water and heat resistant making them suitable for all weather conditions.Set includes: stayguard protection, 4 x 30mm pads, 4 x 20mm pads.