Featuring a lightweight carbon fibre build, this MTB riser handlebar uses its engineered carbon layup to deliver optimal stiffness, strength and an overall low weight. This makes it well-equipped for the demands of racing, as it strikes a balance between durability verses weight, giving you tough and dependable steering performance without any excess grams holding you back. Thanks to this model's nine degrees of backsweep, it's also easier on your wrists in comparison to most traditional handlebar bends, so you can enjoy increased comfort and support. With its five degrees of upsweep, it ensures comfort at all angles for a confident hold as you battle for the finish line. One final highlight is its 20mm rise option weighs in at only 225g, and its 35mm rise option weighs in at 230g, making it a lightweight choice of upgrade for your ride. Manufacturer's Part Numbers: E13HB2005 Black 800x20mm E13HB2006 Black 800x35mm
Race Face Next-R Riser BarsMade for daring enduro and downhill adventures, the quality-built carbon fibre Next-R Riser Bars from Race Face provides is both strong and light for gravity-defying greatness. Designed with aggressive, trail-taming geometry, this 800mm-wide model carefully tuned flex to give enhanced small bump sensitivity, keeping you poised and in control of every ride. With a 20mm rise and oversized 35mm centre section, this is a confidence-boosting addition to your all-mountain cockpit. Features: Material: Unidirectional Carbon Fibre Finish: Matte clearcoat Use: Aggressive Trail, All Mountain, Enduro Width: 800mm Bar Diameter: 35mm Backsweep: 8° Upsweep: 5° Rise: 20mm Weight: 215g Please Note: These bars are only compatible with stems with a central clamp area of 35mm in diameter.Buy Race Face Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Whether ripping up the local enduro trails or hanging with friends in the bike park, Alpinestars’ Tahoe Waterproof Jacket has the everything you want for when the weather turns bad. With a main shell optimized for waterproofing and breathability, a dual adjustment storm hood and silicon grip patterning to help hold in place your backpack and plenty of storage compartments, the Tahoe Waterproof Jacket is an ideal addition to your winter kit bag.Key Features:Fully seam-sealed waterproof main shell (10k waterproofness and 5k breathability) is the perfect combination between breathability and protection against wet weather.,Fully tape-welded seams ensure jacket’s overall waterproofing.,Zippered side ventilation openings to effectively control body temperature.,Waterproof zippered front pockets for safe storage of small personal items.,Premium YKK® waterproof zips plus zip garages for durability and reliability.,Shock chord waist adjustment helps keep garment in position and offers personalized fit.,Bonded helmet-compatible storm hood with dual adjustment system to ensure optimized fit.,Strategically positioned, 300 Denier sleeve reinforcements for abrasion resistance and durability.,Silicon grip patterning on shoulders helps stabilize backpack.,Reflective details on sleeves to make the rider more visible to other road users.,Inner fleece lining on collar for comfort. Garment is loose fitting to allow for wearing of protection underneath.,Extended rear hem provides improved comfort from mud and wet while articulated sleeves promote excellent fit..
Top fitters are constantly devising new methods to maximize and balance these goals. Designed using feedback from top fitters, Zipp’s Vuka Carbon Extensions give you all the options needed to optimize your position and go for the win or your personal best: Vuka Carbon Evo 70 and 110 extensions Vuka Evo extensions decrease drag by starting airflow over the body sooner while keeping the arms and wrists in a comfortable, relaxed position. The Evo shape, with a 20mm inward roll and multi-radius bend, is now available for the first time in carbon, allowing for even more complex shaping and lighter weight. Vuka Race Carbon Extension The Vuka Race Carbon Extension was designed using data compiled from thousands of fit sessions with recreational and professional cyclists and triathletes by the world’s best fitters. The Vuka Race bend places the wrists at a more natural bend to help riders remain in their tuck to optimize aerodynamics.
Identical in alloy and construction to Thomson s Downhill bar, the new Trail bar is 750mm wide with 20mm of rise, 8° of back sweep, and 5° of up sweep. The clamping area is 50mm, allowing a different bend profile for a more compliant ride. The Trail bar gives you a light Aluminium all-around bar for your Mountain Bike.750mm width / 31.8mm7050 Aluminium AlloyVery durable and extremely strongThickened ends from 1.4 to 1.6mmDeveloped by Hydraulic Press FormingLightweightPerfect addition to Thomson's Elite X4 Stem or Direct Mount Stem
The Thomson Elite DH bar is 800mm wide with 20mm of rise, 9° of back sweep, and 5° of upsweep. It s built using 7050 Aluminium alloy for strength and long life. 65mm wide clamping area fits our Direct Mount stem, giving you the most torsional stiffness of any bar/stem combination. 31.8 centre section is absolutely straight over a width of 90mm. The long straight section in the middle reduces stress concentrations, especially when using wide Direct Mount stems.800mm width / 31.8mm7050 Aluminium AlloyLong, straight middle sectionThickened ends from 1.4mm to 1.6mmDeveloped by Hydraulic Press FormingLow weight, high fatigue lifePerfect with Thomson Elite X4 or Direct Mount StemsWeight 325gBars are butted and tapered in many steps for optimal fatigue life. Ends of the bar are thickened from 1.4 to 1.6mm to resist damage from impacts and contact with the ground. Bars are produced by advanced Hydraulic Press Forming to avoid the need for hand grinding. Almost all other bars are manually bent, and bends are ground to appear smooth. Hydraulic Press Forming ensures very consistent wall thickness and close tolerances, especially in tapered sections. This keeps weight low and fatigue life high. Together with a Thomson stem, this is the best Aluminium cockpit you can get. It s the perfect addition to your Elite X4 Stem or Direct Mount Stem.
This mountain bike (MTB) riser handlebar is kitted out with a carbon construction, which offers a fantastic balance of stiffness and strength as well as an impressively low weight. ProTaper has also put this model through its Plastic Foam Lamination (PFL) manufacturing process, which uses tiny particles and steam pressure in the lamination process to expand and shape the structure of the bars. As a result, it uses less excess resin and fewer plys, resulting in a 15% lighter bar. Carbon MTB Riser Bar with Comfortable Geometry Engineered for wherever the trail leads you, this model is equipped with four degrees upsweep and eight degrees backsweep for comfortable and precise steering in demanding terrain conditions. Weighing in at only 190g, this is a great choice of upgrade for strong steering performance without any weight penalty. Technologies: - ProTaper Carbon bars feature PFL (Plastic Foam Lamination) manufacturing. PFL utilises tiny particles and steam pressure in the lamination process to expand and shape the structure of the bars. The process uses less excess resin and fewer plys, resulting in a 15% lighter bar. - Cut marks provide a range of width options. - Textured Grit Grip finish in clamp areas eliminates over-tightening of components. Manufacturer's Part Numbers: 301-36182-C102 Black/Black Stealth 31.8mm 810mm 25.4mm Rise 301-36183-C101 Black/Black Stealth 35mm 810mm 25.4mm Rise 301-36182-C101 Black/Black Stealth 31.8mm 810mm 12.7mm Rise
This Race Face Next handlebar is manufactured with a leading edge unidirectional carbon weave and a precise manufacturing process. This process ensures Race Face bar designs passes Race Face’s downhill (DH) strength requirements at an impressively low XC weight. It also has a reinforced stem anti-crush zone, which minimizes the possibility of stress risers where the stem meets the bar in the area in which most carbon bars fail.
Race Face Next Flat Wide Carbon HandlebarBenefiting from a carbon construction, the Next Flat Wide Handlebar from Race Face has been designed with a hard-wearing premium finish to ensure a durable handlebar that's ready for the challenge. This process ensures the Race Face NEXT bar passes their downhill strength requirements at an impressively low cross country weight. At the top end of Race Face's cross country, Trail And All-mountain segment, sitting above the Turbine, Evolve and Ride product ranges, the Next bars use a reinforced stem anti-crush zone which minimizes the possibility of stress cracks where the stem meets bar. This is the area in which most carbon bars fail. The Flat bars come in 625mm length and have an 8-degree rearward sweep and weigh 175 grams.Features:NEXT bars are manufactured with a leading-edge unidirectional carbon weave & precise manufacturing process. This process ensures Race Face bar designs pass their DH strength requirements at an impressively low XC weight.Reinforced stem anti-crush zone minimizes the possibility of stress risers where the stem meets bar, the area in which most carbon bars fail.Constructed from a high strength unidirectional weave.Use: Cross Country/Racing/Trail/All-MountainSizes: 28.3” or 720mm widthSweep: 8 ° rearwardRise: 19mmBar Diameter: 31.8mmWeight: 202gComes with a Race Face 3 Year WarrantyBuy RaceFace Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Spank Spike 35 Vibrocore™ Riser HandlebarsThe Oozy 760 LTD Vibrocore Riser Bar is a big and burly Downhill (DH) and Freeride bar that’s stiffer, stronger, and easily absorbs vibration for a smoother journey, no matter what the terrain. These qualities are thanks to the Vibrocore™ injected proprietary foam, help to reduce arm fatigue and hand numbness so you can just concentrate on the path ahead.Features: Material: Zirconium Doped 7-Series Alloy Finish: Shot peen-anodized Width: 820mm Rise: 25° Geometry: 5° Upsweep/8° Backsweep Key Technologies: Vibrocore™, Dual XGT, CNC Bending, MGR, Big-Taper (105mm) design Adjustable to 760mm (cut guides at ends of bar) Vibrocore Impulse & Vibration Dampening Core Impact ends Use: Downhill and Freeride Weight: 300gTechnologies:Vibrocore™ Technology: Alloys have a very high density, and in turn transmit vibrational energy very effectively. Vibrocore is a complex, low-density material that fills the core of the handlebar, reducing the frequency, amplitude, and duration of energy waves. Where competitors have been forced to design unwanted flexibility into their bars, Spank's Vibrocore system also acts to reinforce the handlebar from the inside, resulting in a more responsive performance and improved sensitivity. The result is a handlebar that feels incredibly strong and rigid and acts to reduce impulse and vibrational fatigue.Buy Spank Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Spank Spike 35 Vibrocore™ Riser HandlebarsThe Oozy 760 LTD Vibrocore Riser Bar is a big and burly Downhill (DH) and Freeride bar that’s stiffer, stronger, and easily absorbs vibration for a smoother journey, no matter what the terrain. These qualities are thanks to the Vibrocore™ injected proprietary foam, help to reduce arm fatigue and hand numbness so you can just concentrate on the path ahead.Features: Material: Zirconium Doped 7-Series Alloy Finish: Shot peen-anodized Width: 820mm Rise: 25° Geometry: 5° Upsweep/8° Backsweep Key Technologies: Vibrocore™, Dual XGT, CNC Bending, MGR, Big-Taper (105mm) design Adjustable to 760mm (cut guides at ends of bar) Vibrocore Impulse & Vibration Dampening Core Impact ends Use: Downhill and Freeride Weight: 300gTechnologies:Vibrocore™ Technology: Alloys have a very high density, and in turn transmit vibrational energy very effectively. Vibrocore is a complex, low-density material that fills the core of the handlebar, reducing the frequency, amplitude, and duration of energy waves. Where competitors have been forced to design unwanted flexibility into their bars, Spank's Vibrocore system also acts to reinforce the handlebar from the inside, resulting in a more responsive performance and improved sensitivity. The result is a handlebar that feels incredibly strong and rigid and acts to reduce impulse and vibrational fatigue.Buy Spank Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Spank SPIKE 800 Vibrocore Ltd Edition BarsWith World Cup calibre in its design and development, the trail-ready SPIKE 800 Vibrocore handlebar is full of modern technologies to ensure every downhill (DH) race and rough enduro trail ride is comfortable and controlled. Filled with Spank's Vibrocore foam to disperse vibrations and prevent your hands and arms from becoming numb, this alloy riser bar is rigid and robust, giving you the confidence to go all out on the hillside. Adjustable Alloy Mountain Bike (MTB) BarWith the ability to customise the length from 800mm to 740mm, the optimum size for your style of riding can easily be found, while the shot peen finish keeps gives this versatile handlebar excellent durability. A great addition to any hard-riding mountain bike, these bars will guide you to the best ride possible.Features:Material: MGR Super 6 Alloy Finish: Shot peen anodised, decal logosStem Clamp Area: 31.8mmLever Compatibility: Standard 22.2mm clampLength: 800mm, cuttable to 740mmUpsweep: 4°Backsweep: 8°Use: Downhill (DH), EnduroTechnologies: Vibrocore, Dual XGT, CNC Bending, Impact EndsDH Race tuned award-winning alloy handlebar design, developed with World Cup professionalsInjected proprietary foam Vibrocore provides vibration damping to reduce arm pump and hand-numbnessIncreased strength and stiffness compared to conventional alloy barsShot peening and anodising enhances fatigue life even furtherWeight: 30mm Rise: 350g (approx.); 50mm Rise: 360g (approx.)Buy Spank Components from Chain Reaction Cycles, the World's Largest Online Bike Store.