The Alpha knee pad is constructed from a breathable perforated and tougher Duratex neoprene with air plush lining for maximum comfort. The back side of the pad uses a dual layer Lycra design, that is soft on the inside but strong and durable on the outside. To protect your knees from impact we use EVA foam under a nylon hard cap, with additional padding for side impacts. A Sharkskin neoprene inner section ensures the pad stays firmly in place. Features Breathable perforated neoprene with air plush lining, back side with dual layer Lycra, soft inner durable outer and EVA foam padding under nylon hard cap.
The Stay Strong Reactiv Knee Pads are a durable, reliable and comfortable way to keep your knees protected whether you're on the track or the trails. Utilising lightweight E3T foam to protect your knees from slams and cushion impacts, with their lycra body and mesh backing ensuring they're comfortable, breathable and fit snug too. They feature a gel print silicon grip inside the top and bottom bands to help keep them in place throughout the day. FInished with branded top and bottom cuffs and a woven label.
The new Shimano EC300 charging connector is designed specifically for Shimano's 12-speed Di2 road drivetrains. Connected via the rear derailleur, it is also compatible with Shimano power meters. Charging of the new Shimano 12-speed Di2 road drivetrains is now accomplished with the EC300 charger cord. Attached to the rear derailleur, this new cord is less expensive than previous chargers and can also be used to charge Shimano power meters.Di2 charger cable for the internal battery that will keep your Di2 system shiftingDi2 uses a powerful long-life 7.4V Li-Ion battery: keep it in top condition and ready for shifting with this specific Shimano Di2 charger1.5 hour charge timePlugs in directly to RDR9250 rear derailleur
The LR800P performs just like a car floodlight, giving an evenly-distributed beam to illuminate the route ahead and to make other road users aware that you are there. Suited for long-distance and short-sharp runs, this innovative light features a selection of modes to suit the light levels and weather conditions you are riding in. Those modes are: Wide Beam: High: 800 lumens - 1.2 hours Mid: 450 lumens - 1.9 hours Low: 200 lumens - 4.3 hours Rapid Flashing: 300 lumens - 11.5 hours Controlled by a wired remote button on the unit, you can switch between modes without having to let go of your grip, leaving you to concentrate on navigating your way through the lowest-light conditions. Coming complete with a USB-rechargeable, Lithium-Ion battery, the power of this light unit can also be boosted by external USB-compatible power banks to ensure you are illuminated at every section of your journey. Shining to a maximum distance of 126 metres and housed inside an anodised aluminium casing, this Ravemen light is the perfect pick for the year-round, all-season rider.
Ravemen Lighting. Ravemen is derived from their passion for bike riding and concern for bike riders as well as others’ safety. Coming from different areas of the bicycle industry and being biking enthusiasts, engaging in night riding is quite normal for us. To our regret, most of the high-output bike lights on the market have no anti-glare capability, which is dangerous to oncoming traffic, and as a result places them at great risk.In fact, many people have had the experience of being dazzled by high lumen bike lights, and Ravemen believe that every rider also tries not to disturb others while enjoying the fun of riding. Based on such perception and being inspired by automotive headlights, the idea of applying a similar design to bike lights came into their minds. Through the entire process of conceiving, designing, proofing, testing and adjusting, they finally made it! That means the world’s first bike light with a simulation of the design of automotive headlights is available.Combining high quality and durable material with innovative design, along with the concern for riders and others’ safety which has been fused into their genes, Ravemen promise their products will be not only reliable and easy-to-use to improve your riding experience, but also a trusted companion that will earn you respect from others.Key Features:Specifically designed curved lens with even-distributed flood beam and side visibility, great for road cycling and commuting,Extending battery runtime by connecting with external power source,Multiple brightness levels and daytime visible rapid flashing for night and daytime riding,Wired remote button(sold separately) to change brightness levels safely without releasing the grip,Built-in battery indicator and charging indicator,Thermal protection circuit and durable anodized aluminium body with better heat dissipation performance,Quick release for easily slide in/out; compatible with aero handlebar and round handlebar with 22.2mm to 35mm diameter,.Specifications:LED: 1*CREE XP-G2 with a lifespan of 50000 hours,Battery: 2200mAh/3.7V rechargeable Lithium-ion battery,Dimensions (Headlight): 85 x 36 x 30mm; Weight (Headlight): 119g,Materials: The main body is made by durable anodized aluminium; the handlebar mount is made by durable plastic.
Key Features:2.5 hours charging time,Rotatable Anti-Dazzling Lens - allows upside down mounting,CNC aluminium alloy body,Water resistant (IPX 7),GARMIN STYLE Quick release handlebar mount,Heat sink cooling system,Low battery indicator,Precision optical lens,Automatic fully charged cut-off system.,Charging & fully charged indicator,Mode memory,Variable lumen system.Runtime:M1 - 1:45hr - 500lm,M2 - 6:00hr - 150lm,FL1 - 31:15hr - 100lm,FL2 - 14:30hr - 400lm,Day FL - 40:00hr - 400lm,SOS - 26:15hr.
Often the best location for a rear light visibility is just below the saddle of your bike, as such the new Blinder Link has the ability to mount just below the saddle keeping the seat post clear of clutter and the light at the optimum position for visibility to other road usersChip on board LED’SUsing advanced COB LED technology mean the Link produces a clear, bright and consistent beam of light.Super brightProducing a powerful 100 Lumens means the Link is bright enough for use any riding conditions100% waterproofWith an ip67 rating, this light can be summered in 1 meter of water and still come out shining.Saddle mountUniversal saddle rail mount, easy to fit and secure without taking up vital seat-post space.Clip wearableWhen not on its designated mount, the Link has a clip that allows a rider to attach it to their bag, their belt or anywhere they wish to have additional visibility.Charge indicatorConvenient LED glows green whilst the light is charging and turns off when the light has achieved full charge capacity.USB C RechargeableNo need to worry about batteries with Link; simply recharge by plugging into any USB C port using the supplied cable.Low battery indicatorNo need to guess when you're light need to be recharged with a convenient led that lights up red when your light dips below 10% remaining charge.Light weightWeighing just 40 grams this is lightweight in all the right ways.8 modesThe Link has eight modes to choose from, including: 50 Hr runtime, so whether you are looking for the best battery life or the most eye-catching light pattern, the link has a multitude of options to pick from.Runtimes:Steady On - High - 35 Lumens - Runtime 4 hrs,Steady On - Low - 20 Lumens - Runtime 7 hrs,Low Flash - 50 Lumens - Runtime 7 hrs,High Flash - 100 Lumens - Runtime 19 hrs,Fading Flash - 30 Lumens - Runtime 14 hrs,Pulse Flash - 70 Lumens - Runtime 19 hrs,Accelerating Flash - 30 Lumens - Runtime 7 hrs,Eco Flash = 30 Lumens -Runtime 50+ hrs.
Chip on board LED’S & side illuminationFitted with advanced cob led technology means, the r-150 produces a superbright and consistent beam of light covering a wide area. The cobs wide beam angle, in addition to lens geometry specifically designed for side illumination, allows for 200 degrees of visibility.Multi-channel LED’S & spectacular flash patternsThrough its use of advanced cob led technology and seven dedicated lighting channels, the r-150 is able to produce arresting visual patterns that are almost impossible to miss. Wide-beam cob and focused strobe led combined with high output, and eye catching patterns means this light is highly visible when used in day or night.Super brightProducing a powerful 150 lumens, the r-150 is bright enough for use day or night in any riding conditions.100% waterproofWith an ip67 rating, this light can be summered in 1 meter of water and still come out shining.Convenient usb rechargingRecharged via integrated usb-a means there is no requirement for single-use batteries or charging cables. Recharged from flat in three hoursDedicated strobe LEDThe r-150's exceptional visibility is also aided via a dedicated high powered strobe led on its own channel. This allows the strobe element of this light to operate independently from the rest of the LED’S. Finally, with the strobe led focused optic set at an angle of 12°, it means that even when mounted on a seat tube, the r-150 strobe is pointing in the right direction (parallel to the road) to maximise visibility at long distances.Charge indicatorconvenient led glows green whilst the light is charging and turns off when the light has achieved full charge capacity.Low battery indicatorNo need to guess when you're light need to be recharged with a convenient led that lights up red when your light dips below 10% remaining charge.Light weightWeighing just 40 grams this is lightweight in all the right ways.8 modesThe r-150 has eight modes to choose from, including: a 50hr runtime, so whether you are looking for the longest run time or the most eye catching light pattern, the r-150 has a range of options to pick from.
crankbrothers Stamp 1 PedalsThese superb flat pedals offer an optimal surface area and a minimal 13mm thin profile for riding from trail to trail in style. Their premium bearings feature a seal system for a smooth rotation and efficient pedal stroke performance. Enjoy fast and reliable acceleration as you weave your way from trail to trail. These stunning pedals show off 9 hex traction pins per side for unrivalled grip and support when riding down the most challenging off-road runs. Features: Material: Platform: Composite; Spindle: Forged scm 435 CrMo Steel Dimensions: 100x100mm (Small); 111x114mm (Large) Hex Traction Pins: 9 per side (mounted from back) Inner Bearing Type: Igus LL-glide bearing Outer Bearing Type: Enduro cartridge bearing Weight: 299g (Small); 329g (Large)Buy Crank Brothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Low-Key Coverage. For peace of mind and protection from the scrapes that come from XC/trail riding, the Charge Knee has you knees covered. Pedal all day long with the Charge's comfortable, slide on fit. The Charge Knee is not rated for impact protection.Pedal On - Your knees are always in motion so comfort is key. That's why we strategically sewed the inner knee gusset to provide irritation free pedaling.No Scrapes Here - Non impact rated foam panels covered with stretch material with flat lock stiching to keep your XC / Trail rides comfortably abrasion free.Stay Put - Silicone gripper along inner top thigh opening plus a silicone patch at shin ensures that these pads stay in place no matter how hard you're pedaling.Key Features:Construction - Butterfly mesh.,Protection - Foam knee cover.,Gripper - Silicone thigh gripper, silicone patch at shin.,Other - Abrasian resistant knee cover..
Regular fit mid weight joggers from Doomed. 80% cotton 20% polyester anti-pill fleece. Self-fabric elasticated waistband & hem cuffs, 2 side pockets, single pocket at back, tonal external drawcord, preshrunk to minimise shrinkage.
The original ergonomic grips for touring and fitness cyclists. The worldwide leader in function, material and craftsmanship, the GP Series prevents numb fingers, aching hands and forearms.Fibreglass composite clamps with rubber insertsMade from 100% German, TÜV-certified rubber compoundsBar end and grip body can be changed and adjusted to suit your preferenceWeight: 338g (approx.)The Ergon GP3 Grips come with a 3-finger bar end to deliver more hand positions and improved leverage and stability when climbing or during out of the saddle riding. The bar end angle can be adjusted independently from the angle of the grip for the perfect personal fit and the bar end doubles as a clamp to lock the grip in place and prevent movement while riding. Like all the grips in the GP-Series, the GP3 eliminates numb hands, aching fingers, and tired forearms. The GP3 is made from 100% German, TÜV-certified rubber compounds of the purest quality.Sizing Information:In order to help you maintain perfect control over your bike, your hands should not completely envelop the grip, which is why Ergon offers many grips in two size diameters Small and Large.The difference refers to the grip width (hand size), meaning a larger hand will have a more positive fit on a thicker grip, while a smaller hand is better fit to a smaller grip. For hand/glove sizes 6.5 to 8.5" we recommend Small, for 8.5 to 10.5" Large usually is better. To measure your hand/glove size you need to measure around the largest part of the hand over the knuckle while making a fist, excluding the thumb.