Knog PWR Battery Bank (Large)A large power bank with a 10000mAh battery output that can be used to power 600, 1000, and 1800 lumen PWR lights and PWR outdoor products. The bank is USB rechargeable and can also be used for charging additional USB compatible devices including your iPhone or cycling computer. The PWR Bank Large comes with a CNC machined aluminium exterior construction which protects against impacts, abrasions and weather.Features10000mAh battery outputUSB rechargeableCNC machined aluminium exterior constructionExtreme weather protectionWeighs 255gDimensions: 104mm x 48mmBuy Knog Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
PWR Large Mount for 31.8mm and 35mm handlebars. Specification Included in the pack: 1 x Large Mount. 35mm Shim. 31.8mm Shim. 2.5mm Allen Key. Compatible with: Small Medium and Large PWR Banks.
Recharge your devices on the go with this 10000 mAh power bank and stay out for longer. PWR Bank is also part of Knog's PWR Modular System an ecosystem of bike and outdoor products designed to share their battery. So with the addition of a PWR light head or mount you can turn this PWR Bank into a powerful flashlight or front bike light. A super tough and durable 10000 mAh power bank and potential for so much more you decide. FEATURES Compatibility - The 10000mAh PWR Bank is compatible with the 600 1000 and 2000 lumen PWR lightheads and PWR outdoor products. Charge your devices - Use this PWR Bank to charge your iPhone or cycling computer on the go. Battery - USB Rechargeable Lii-ion battery. Accessories Included - Micro USB cable. SPECIFICATION Battery output: 10000 mAh. Diameter: 48mm Ø. USB-A output Can hold multiple device charges Mini USB rechargeable (cable included) Waterproof with IP66 rating when protective cap on (storm proof) Can power other products in the PWR Modular System Tough and durable aluminium housing Charge / capacity indicators Quick Charge Long Lasting The Large PWR Bank is a USB rechargeable Li-ion battery with a charge time of 7 hours. The 4 LEDs on the side light up sequentially when charging and also show how much capacity you have left. One Battery Many Uses It's a brilliant standalone power bank but add a PWR Light head Mount or Lanyard and create another product completely. INSTRUCTIONS Charging your PWR bank: PWR Banks use a micro USB input to charge. Using the micro USB cable provided you can plug this into any powered USB port or USB wall plug charger. Charging devices with your PWR bank: To charge a device connect the device's charge cable to the female USB port on the front of the PWR Bank and plug the other end of the USB cable into an available powered USB port.
The rebirth of an iconic bicycle light the Frog Rear Bike Light: bright versatile & fun. A design that millions of riders around the world have come to love. Powerful enough for everyday commuting or used to complement an exisiting lighting set-up. Taking cues from Knog’s more advanced lights Frog is designed with Chip on Board LED technology enabling a high intensity light that's compact low profile and packed with features. COB LED TECHNOLOGYTaking cues from some of Knog's most technologically advanced lights Frog now features advanced Chip on board (COB) LED technology. This allows Frog to create high intensity light in a compact and low-profile light. Producing 45 lumens for the front light and 25 for the rear. These lights are powerful enough for everyday commuting or as a complement to your existing lighting set-up. ADVANCED SIDE VISIBILITYAnother benefit of the COB technology is that it allows the LED's to be arranged on a curved board. This means that light is emitted from the sides of the light greatly adding to the side visibility of the light and the additional safety this affords the rider. ONE BUTTON OPERATIONOne large easy press button makes the operation of these lights super simple even in gloves. USB RECHARGEABLEThis is the first Frog light ever that is rechargeable; simply plug it into a USB C to charge. A full charge is achieved in just 3 hours. 100% WATERPROOFWith an IP rating of IP67 these lights keep on shining whatever the weather. MULTIPLE MODES8 modes to choose from. LONG LASTINGWith up to 50 hours between charges you'll have light whenever you need it. COMPACT LIGHTWEIGHT DESIGNWeighing in at just 20g and with a streamlined and compact design Frog can be mounted on even the most cluttered bike's cockpit without interfering with its operation. INTEGRATED FLEXIBLE MOUNTING SYSTEMWith no tools required to mount the light and featuring an integrated strap & flexible body Frog is easily mounted anywhere on your bike your helmet... wherever. Punchy 20 lumen output Integrated flexible mounting system 9 eye-catching modes Water resistant with IP65 rating Super lightweight at just 20 grams USB-C rechargeable Curved lens provides side illumination Up to 60 hour runtime Simple one-button operation Available in 6 fun-loving colours Light Modes MODE LUMENS RUNTIME High 7 3 hrs Low 1 15 hrs Side Flash 11 4 hrs Full Bright 20 7 hrs Back To Front 5 13 hrs Front To Back 8 6 hrs Side To Side 6 5 hrs Rotation 6 13 hrs Eco 4 60 hrs
The rebirth of an iconic bicycle light the Frog Front Bike Light: bright versatile & fun. A design that millions of riders around the world have come to love. Powerful enough for everyday commuting or used to complement an exisiting lighting set-up. Taking cues from Knog’s more advanced lights Frog is designed with Chip on Board LED technology enabling a high intensity light that's compact low profile and packed with features. COB LED TECHNOLOGYTaking cues from some of Knog's most technologically advanced lights Frog now features advanced Chip on board (COB) LED technology. This allows Frog to create high intensity light in a compact and low-profile light. Producing 45 lumens for the front light and 25 for the rear. These lights are powerful enough for everyday commuting or as a complement to your existing lighting set-up. ADVANCED SIDE VISIBILITYAnother benefit of the COB technology is that it allows the LED's to be arranged on a curved board. This means that light is emitted from the sides of the light greatly adding to the side visibility of the light and the additional safety this affords the rider. ONE BUTTON OPERATIONOne large easy press button makes the operation of these lights super simple even in gloves. USB RECHARGEABLEThis is the first Frog light ever that is rechargeable; simply plug it into a USB C to charge. A full charge is achieved in just 3 hours. 100% WATERPROOFWith an IP rating of IP67 these lights keep on shining whatever the weather. MULTIPLE MODES8 modes to choose from. LONG LASTINGWith up to 50 hours between charges you'll have light whenever you need it. COMPACT LIGHTWEIGHT DESIGNWeighing in at just 20g and with a streamlined and compact design Frog can be mounted on even the most cluttered bike's cockpit without interfering with its operation. INTEGRATED FLEXIBLE MOUNTING SYSTEMWith no tools required to mount the light and featuring an integrated strap & flexible body Frog is easily mounted anywhere on your bike your helmet... wherever. Punchy 40 lumen output Integrated flexible mounting system 9 eye-catching modes Water resistant with IP65 rating Super lightweight at just 20 grams USB-C rechargeable Curved lens provides side illumination Up to 80 hour runtime Simple one-button operation Available in 6 fun-loving colours Light Modes MODE LUMENS RUNTIME High 18 4 hrs Low 3 20 hrs Side Flash 27 5 hrs Full Bright 40 10 hrs Back To Front 12 18 hrs Front To Back 17 8 hrs Side To Side 17 7 hrs Rotation 17 18 hrs Eco 10 80 hrs
Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? The bells fit on almost all cylindrical bars. The Large Oi is for all bar sizes up to 31.8mm. The Oi will also work on any aero bar with a 16mm cylindrical section (usually near the stem). SPECIFICATIONS SIZE: Large bell fits bars 23.8mm - 31.8mm (How to measure your handlebars).WEIGHT: Large 28gMATERIALS: Aluminium with Nylon mount & acctuatorBIKE ATTACHMENT: Nylon clamp with hex screw to secure bell to your bike. What about getting it on the bar? Just pop it over give it a quick tighten up and you're good to go. No sliding down the handlebars no dismantling and re-assembling. FEATURES STYLES: Brushed Aluminium Black Brass CopperCABLE MANAGEMENT: Built into the shape of the Oi mount is a cable management system. So not only does it allow the bell to look and sound uninterrupted it also helps gather your cables (for the organiser inside us all)
The Blinder ROAD 250 is a specifically designed hi-powered road light for the discerning rider. With incredible power / weight ratio and dual + constant flash modes, you won't find another light like this.Using two of the latest high-intensity LUMILEDS LEDs and incorporating both wide and narrow angle beams, the Blinder Road 250 floods any street in light, giving cyclists total night vision whilst being visible to others at over 1000m.SpecificationDimensions: 53x30x63mm,Weight: 105g,Materials: UV-resistant industrial grade silicone rubber body and strap. Polycarbonate housing. PMMA Lens. Anodised aluminium heat sink. Anodised aluminium fascia and solid stainless steel MIM latch.,LEDs: 2 x Lumileds Luxeon Z ES,Battery: Integrated rechargeable Lithium Polymer.,Peak brightness: 250 Lumens,8 Light modes: 1. Narrow Low Beam, 2. Narrow High Beam, 3. Wide Low Beam, 4. Wide High Beam, 5. Dual Low Beam, 6. Dual High Beam, 7. Alternating LEDs Flashing, 8. Alternate flashing, eco flash,Run-time (steady): Narrow low - 2hrs, Narrow high - 1.5hrs, Wide low - 2hrs, Wide high - 1.5hrs, Dual low - 2.7hrs, Dual high - 2.2hrs,Run-time (flash): One flash, one constant - 3.5hrs, Alternating flash, eco flash - 5.5hrs,Waterproof: 100% Waterproof and Dustproof to IP67.,Beam angles (degrees): Narrow - 15°, Wide - 22°, Dual - 15°/22°.FeaturesLens: Two high precision, injection moulded TIR collimating lenses give a balanced ratio of beam width and distance to safely illuminate you and the path ahead.Visible to 1000+ metresIntegrated lithium polymer battery with on board battery protection circuit. Rechargeable via built in USB plug and extension cable (included). This saves using about 600 AAA Alkaline batteries during the light's lifetime.Constant current drive technology maintains consistent brightness throughout specified run-time.Integrated USB plug is waterproof and designed not be damaged by exposure.5 hour charge timeReplaceable straps for tool-less attachment, 1 x Short (for ø22-28mm) 1 x Long (for ø29-35mm)Button: New longer button push on (0.75sec) prevents accidental activation of your light. Short presses switch modes continuously. Similarly, the light is switched off with a long button push off (0.5sec).Low battery indicatorThermal management automatically regulates the light output for optimum performance when the bike is stationary and in motion.Accessories: USB Extension Cord, Helmet Mount Kit.Tested against dropping, corrosion, UV, electrical shock and static, vibration and impact, temperature and humidity, as well as cycle testing and CE certification.
The Knog Blinder Mini Dot Rear light is the ideal commuter rear bike light. It’s perfect for riding on well-lit roads at night and in daylight for added visibility.Blinder Mini Dot Rear’s surface mounted LEDs punch well above their weight. Outputting 11 lumens of light with a 20° beam you’ll be seen from up to 800m away. It has a run time of up to 11 hours on eco-flash mode and you’re spoilt for choice with 5 light modes: steady high, steady low, strobe, fancy flash and eco-flash.Simple MountingWith a weight of only 18 grams the light uses its tool-less attachment to securely connect to handlebars and frames of 22-32+mm. Blinder Mini Dot uses strong silicone and interchangeable straps to give you the perfect fit. And with a notch in the rear of the light – it sits well on posts and bars.Easy and Quick To ChargeYou don’t need any cables to charge your Blinder Mini Dot. Just un-clip, remove from seat post or handlebars and plug straight in to any available USB socket to recharge. That’s it. No external charge cables = no worries + many hours of cable searching saved. Plus it’s super quick to charge taking only 2.5 hours to recharge fully.Specification:Dimensions: H: 40mm x W: 29mm,Weight: 17 grams,.ModeRuntimeSteady High2.2 hrsSteady Low3.5 hrsStrobe3.2 hrsFancy Flash4.5 hrsEco Flash11.0 hrs
The Blinder Road R70 is the rear bike light for the discerning rider. With side illumination, dual and constant flash modes, and super power, you won’t find another bike taillight with as much brains and beauty. Specification: Dimensions: 27x75x35mm,Weight: 75g,Materials: UV-resistant industrial grade silicone rubber body and strap. Polycarbonate housing. PMMA Lens. Anodised aluminium heat sink. Anodised aluminium fascia and solid stainless steel MIM latch.,LEDs: 1 x CREE XB-D, 3 x Super bright LEDs,Battery: Integrated rechargeable Lithium Polymer.,Peak brightness: 70 Lumens,5 Light modes: 1. Steady, 2. Fast flash, 3. Linear flash, 4. Steady 2 LEDs, 5, Eco flash,Waterproof: 100% Waterproof and Dustproof to IP67.,Beam angles (degrees): Narrow - 22°, Wide - 80°,Visible to 1000+ metres,Integrated lithium polymer battery with on board battery protection circuit. Rechargeable via built in USB plug and extension cable (included). This saves using about 600 AAA Alkaline batteries during the light's lifetime.,Constant current drive technology maintains consistent brightness throughout specified run-time.,Integrated USB plug is waterproof and designed not be damaged by exposure.,5 hour charge time,Replaceable straps for tool-less attachment, 1 x Short (for ø22-27mm) 1 x Med (for ø27-32mm) 1 x Long (for ø32mm+).,Button: New longer button push on (0.75sec) prevents accidental activation of your light. Short presses switch modes continuously. Similarly, the light is switched off with a long button push off (0.5sec).,Low battery indicator, Tested against dropping, corrosion, UV, electrical shock and static, vibration and impact, temperature and humidity, as well as cycle testing and CE certification.,. Mode Runtime Steady 3.5 hrs Fast Flash 4.0 hrs Chaser Flash 5.0 hrs Peloton 13.0 hrs Eco Flash 20.0 hrs
PWR Rider is a 450 lumen bike light that can also be used as a power bank. Includes the option to program your brightness and runtime (through ModeMaker app), then use your remaining battery to charge your devices. The light outputs in an elliptical beam for broader, brighter road coverage; has a 2 hr runtime at max 450 lumens and 4 smart battery indicator LEDs to let the rider know how much charge is left in the light. The two Charger lights come with 5 pre-programmed modes, just in case you haven't yet discovered the ModeMaker app. The PWR Rider will last 2 hours at 450 lumens, and for those with stamina, will run at 200 lumens for 5 hours. Elliptical beam - Elliptical beam for wide view works with spot beam for intense light in front of front wheel. Programs your modes - The ModeMaker app lows you to design the modes for any PWR bike light. Simply plug in your light, then select and tailor modes from the menu. You can do things such as control brightness, adjust runtimes and add new light modes.Charge your devices - Rear of the light is a USB rechargeable power bank. Use this to charge your phone, GoPro or cycle computer on the go. 1 hour riding @250 lumens means you can top up charge your iPhone by 10%. Charge time 3.5 hours. Specification: Light output: 450 Lumens.,Power Bank: 2200 mAh.,Dimensions: 122 x 30mm Ø.,Weight: 115g.,Battery indicator.,CNC Machined.,Programmable modes.,USB rechargable.,Water resistant when cap is on.,. Mode Lumens Runtime Ride 450 2.0 hrs Commuter 190 5.5 hrs Stamina 50 16.0 hrs Pulse 320 7.0 hrs Strobe Flash 190 10.0 hrs Eco Flash 50 90 hrs
PWR Commuter is a 450 lumen LED bike light that can also be used as a power bank. Includes the option to program your brightness and runtime (through ModeMaker app), then use your remaining battery to charge your devices. The light outputs in an elliptical beam for broader, brighter road coverage; is USB rechargeable, and has 4 smart battery indicator LEDs to let the rider know how much charge is left in the light. The two Charger lights come with 5 pre-programmed modes, just in case you haven't yet discovered the ModeMaker app. The optimum steady mode for the PWR Commuter is the aptly named Commute mode. It runs for 2 hours at 200 lumens, but there is always the option to crank it up to the 450-lumen Ride mode. Elliptical beam - Elliptical beam for wide view works with spot beam for intense light in front of front wheel. Programs your modes - The ModeMaker app lows you to design the modes for any PWR bike light. Simply plug in your light, then select and tailor modes from the menu. You can do things such as control brightness, adjust runtimes and add new light modes.Charge your devices - Rear of the light is a USB rechargeable power bank. Use this to charge your phone, GoPro or cycle computer on the go. 1 hour riding @250 lumens means you can top up charge your iPhone by 10%. Charge time 3.5 hours. Specification: Light output: 450 Lumens.,Power Bank: 850 mAh.,Dimensions: 98 x 30mm Ø.,Weight: 85g.,Battery indicator.,CNC Machined.,Programmable modes.,USB rechargable.,Water resistant when cap is on.,. Mode Lumens Runtime Ride 450 40 mins Commuter 190 2.5 hrs Stamina 50 7.0 hrs Pulse 320 2.5 hrs Strobe Flash 190 3.5 hrs Eco Flash 50 35.0 hrs
PWR Rider Duo is a 450 lumen front and a 12 lumen rear bike light that can also be used as a power bank. The front light outputs in an elliptical beam for broader, brighter road coverage while the rear light has a narrow bean for day and night visibility.The front light outputs in an elliptical beam for broader, brighter road coverage; has a 2 hr runtime at max 450 lumens and 4 smart battery indicator LEDs to let the rider know how much charge is left in the light.Key Features:The two Charger lights come with 5 pre-programmed modes, just in case you haven't yet discovered the ModeMaker app. The PWR Rider will last 2 hours at 450 lumens, and for those with stamina, will run at 200 lumens for 5 hours. Elliptical beam - Elliptical front light beam for wide view works with spot beam for intense light in front of front wheel., Narrow Beam - Rear light features a narrow beam for day & night visibility., Programs your modes - The ModeMaker app lows you to design the modes for any PWR bike light., Simply plug in your light, then select and tailor modes from the menu. You can do things such as control brightness, adjust runtimes and add new light modes., Charge your devices - Rear of the light is a USB rechargeable power bank. Use this to charge your phone, GoPro or cycle computer on the go. 1 hour riding @450 lumens means you can top up charge your iPhone by 35%. Charge time 3.5 hours.,.Specification: Light output: 450 Lumens (Front) / 12 Lumens (Rear)., Power Bank: 2200 mAh., Dimensions: 122 x 30mm Ø., Weight: 115g (Excludes mount & Redcap)., Battery indicator., CNC Machined., Programmable modes., USB rechargeable., Water resistant when cap is on., Helmet mount also works with GoPro®,. Mode Lumens Runtime (Without Redcap) Redcap Ride 450 2.0 hrs Steady Commuter 190 5.5 hrs Steady Stamina 50 16.0 hrs Flash Pulse 320 7.0 hrs Flash Strobe Flash 190 10.0 hrs Flash Eco Flash 50 90.0 hrs Steady