An excellent choice for summer riding made with lightweight highly breathable Coolmax fabric.The cycle specific cut has a great look with contrast panels on the under arms side and back. All the seams are flat locked to add in durability and maximise comfort. There’s a long CF zipper with a snap-down and zip guard for easy fitting and extra ventilation. The jersey has triple rear pockets for plenty of on ride storage and added visibility with reflective prints on the rear and sides.
Performance gloves for use when the Mercury rises. The lightweight Endura FS260-Pro Print Mitt is specifically design for use in hotter temperatures to keep you in full control and comfortable. 4-way stretch backhand area offers a close fit that is not constrictive. The palm is also breathable too with the addition of a mesh vent plus it has vibration dampening gel zones to kill off the road-buzz. Finger tabs are added to make removing the gloves easier and the strapless cuff gives a nice light feeling around the wrist.
Fully featured waterproof trousers offering you excellent protection from the elements on your daily ride.The material is both waterproof and breathable with fully taped seams so it will protect you from the rain but maintain your comfort at the same time. If they are being used as over-trousers they can be fitted quickly without the need to remove your shoes thanks to the extended ankle zips. The leg length is adjustable too with a popper system allowing for some customisation of fit. Visibility on the road is taken care of with 360° reflectivity. Waterproof/breathable fully seam-sealed fabric PFC-Free non-toxic durable water repellent finish Twin zip pockets stud and zip fly Extended length ankle zips Popper leg length adjustment Durable inner ankle panels ankle gusset Reflective elements visible through 360° Technical detailsWaterproofness: 10000Breathability: 10000
Effetto Mariposa Allpine Light Recharge Bottle (1 Litre)The AAllpine Light Recharge Bottle from Effetto Mariposa is a deep-cleaning, highly efficient and biodegradable bike cleaner refill bottle for use with the spray head that comes with the Allpine Light cleaner bottle. Formulated using pine oil, this superb bike cleaner is ideal for quick cleaning without the need to rinse using water afterwards.With its intense pine scent, Allpine Light is a biodegradable cleaner that will leave your bike clean and shiny. Its formula is very effective against dirt and does not require rinsing, making it ideal also for electric bikes (E-Bikes).Biodegradable Pine Oil Eco Bike CleanerAllpine Light is harmless to the environment but very effective against dirt. After using it, you can get on a clean bicycle with a nice pine scent - a good way to start an epic ride. It is also ideal for E-Bikes since there is no need to rinse it away after cleaning.There are times when you are in a hurry and a quick cleaning is sufficient, or - especially for e-bikes - you want to limit the use of water close to electrical contacts. For these situations of moderate dirt, Allpine Light and a rag are enough to clean the bike, without the need to rinse with water.Use Without Rinsing: Spray Allpine Light on a clean rag and wipe the entire frame After cleaning, the surface will be shiny, with an anti-water and antistatic effect As it does not contain silicone, it avoids that annoying sticky effect which is a real dust magnet. The surface thus treated also facilitates the flow of water Note: Allpine Light does not remove the lubricant from the chain, so it is not necessary to relubricate it after such a cleaning When the going gets tough, it doesn't hold back If the bike is very dirty and / or muddy, you have to perform a serious cleaningUse With Rinsing: Generously spray Allpine Light all over the bike Wait a few minutes to let the product act Rinse with plenty of water. A sponge or brush is recommended for an optimal result Dry with a clean cloth. If needed, use more Allpine Light - without rinsing - to remove any streaks or traces of dirt Lubricate the bicycle (chain, suspension, moving parts) after such a thorough cleaningFeatures: Rapidly biodegradable, pine scented and extremely effective against dirt Ideal for E-Bikes, it can be used without rinsing with water in case of slight dirt, drying it with a cloth In presence of mud or on a very dirty bicycle, spray the product abundantly and leave it to act for a few minutes before rinsing with water It doesn't contain silicones but leaves the surface shiny, with an anti-water and dirt-repellent effect It doesn't remove lubricant from the chain Harmless to chrome, painted parts and carbon It doesn't require special disposal precautions (if in doubt, refer to the legislation in force)Please Note: this bottle is a refill bottle, and the spray head is not included with this bottle.Buy Effetto Mariposa Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Effetto Mariposa Caffelatex Mountain Bike Tubeless KitCaffélatex is a truly innovative tyre sealant, free of ammonias and other aggressive chemicals; it is kind to the tyre casing and provides an excellent seal for punctures up to 6mm. It now comes in a handy kit containing everything you need to convert your wheels to tubeless. This complete kit comes in a handy tool bottle, containing a 250ml bottle of sealant, one roll of tubeless tape (enough for two wheels), and two tubeless valves with conic adapters for Schrader or Presta compatibility. The kits come in small, medium or large, designating the width of rim tape provided. Features: Complete tubeless kit in a functional Tool Bottle Presta valves with conic adapters for Schrader drilled rims Anodised Red valve caps Size: S - 20-24mm; M - 25-29mm; L - 30-34mm Kit Contains: 1 Portatutto tool bottle (as functional packaging) 1 bottle of Caffélatex sealant, 250ml, with measuring over-cap 1 roll of Caffélatex Tubeless Tape (S, M or L version, depending on the kit) 2 Caffélatex Tubeless Valves with conic adapters (for both Presta and Schrader-drilled rims) and a key for Presta mechanisms Branded Sticker Instruction leafletBuy Effetto Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Effetto Mariposa Caffelatex Tubeless Rim TapeDesigned to replace standard rim-tape, Caffélatex Tubeless Tape perfectly adapts to the internal rim profile and makes standard rims airtight by sealing the spoke holes. It allows tubeless conversions of most standard mountain bike wheels, using Tubeless or Tubeless-Ready tyres and Caffélatex sealant. Three different widths are available: S: for rims with external width between 20 and 24mm; M: for rims with external width between 25 and 29mm; L: for rims with external width between 30 and 34mm. Features: Made of polyester: The best material for technical tapes, with very high strength properties. Stable: It easily conforms to rim shapes and has low memory (it doesn’t ‘spring back’ once put down in the rim channel). Adhesive strength: The adhesive can stick to silicone-treated paper and is much more tolerant to less-than-perfect rim cleaning before tape application. Smaller core: 1 inch instead of 3 inch-diameter cores of most tapes, to save space and to make it easier to tension it while taping the rim (inserting the thumb inside the core, it happens very naturally). Sealed: to preserve the tape properties and to underline its “technical product” status, each tape is now contained in a re-sealable bag. Buy Effetto Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
With tubeless tyres becoming more and more prevalent, more and more riders are enjoying the benefits of tubeless. But what if your rims are not tubeless compatible Effetto Mariposa's Caffelatex Tubeless Tape is the answer, allowing you to convert normal rims to tubeless.Rim tape is incredibly easy to use, converting your rims to tubeless-readyRequires tubeless valves and sealant (Sold separately)Can be used with some non-tubeless-ready MTB tyres not recommended for tube-only road/CX tyresWhile more and more rims are designed from the outset to be used with tubeless and tubeless-ready tyres, there are still a huge number only designed to take tubes. Rather investing in a new set of wheels, the Effetto Mariposa Caffelatex Tubeless Tape allows you to convert your regular inner-tube only wheels to tubeless-ready. Starting with the Caffelatex Tubeless Tape, you can remove your current rim tape or cloth and install the tubeless tape. This is the first step in setting your wheels and tyres up tubeless. The tape helps to make the rim as air tight as possible when combined with the tyre sealant. The width of the tape varies, so you must select the right size for your rim. The S Kit suits rims with an external section of 20-24mm, M suits 25-29mm and L suits 30-34mm wide rims.
Not all modern mountain bike rims are tubeless compatible, so if you want to take the tubeless plunge but don't want to invest in new wheels, the Effetto Mariposa Caffelatex Tubeless strip is the answer.Lightweight, puncture resistant transparent rim strip makes tubeless conversion easyFit strip and valves to wheels, add sealant to tubeless or tubeless-ready tyres, inflate and go for a rideLong lasting construction can be moved from wheel to wheelSold as a kit including two rim strips and two 40mm tubeless valvesWhile more and more rims are designed from the outset to be used with tubeless and tubeless-ready tyres, there are still a huge number only designed to take tubes. Rather than investing in a new set of wheels, the Effetto Mariposa Caffelatex Rim Strip allows you to convert your regular inner-tube only wheels to tubeless-ready, so you can enjoy puncture-free riding.When using the Caffelatex Rim Strip, you can remove your current rim tape or cloth and install the strip. This is the first step in setting your wheels and tyres up tubeless. The strip helps to make the rim as air tight as possible. When combined with the tyre sealant, this keeps the tyres inflated and more resistant to punctures. The width of the tape varies, so you must select the right size for your rim. The Small Kit suits rims with an external section of 20-24mm, Medium suits 25-29mm and Large suits 30-34mm wide rims. Once the strip and valves are installed you can install your tubeless or tubeless-ready tyres, add your sealant of choice, inflate the tyres and you're good to go! You can finally kiss punctures goodbye. The strips and valves are incredibly durable, so you can easily swap them between wheels if you need to. Thanks to the Effetto Mariposa Caffelatex Rim Strip, you no longer need to have a set of expensive tubeless or tubeless-ready wheels to enjoy the benefits of such a setup.
Not all modern mountain bike rims are tubeless compatible, so if you want to take the tubeless plunge but don't want to invest in new wheels, the Effetto Mariposa Caffelatex Tubeless strip is the answer.Lightweight, puncture resistant transparent rim strip makes tubeless conversion easyFit strip and valves to wheels, add sealant to tubeless or tubeless-ready tyres, inflate and go for a rideLong lasting construction can be moved from wheel to wheelSold as a kit including two rim strips and two 40mm tubeless valvesWhile more and more rims are designed from the outset to be used with tubeless and tubeless-ready tyres, there are still a huge number only designed to take tubes. Rather than investing in a new set of wheels, the Effetto Mariposa Caffelatex Rim Strip allows you to convert your regular inner-tube only wheels to tubeless-ready, so you can enjoy puncture-free riding.When using the Caffelatex Rim Strip, you can remove your current rim tape or cloth and install the strip. This is the first step in setting your wheels and tyres up tubeless. The strip helps to make the rim as air tight as possible. When combined with the tyre sealant, this keeps the tyres inflated and more resistant to punctures. The width of the tape varies, so you must select the right size for your rim. The Small Kit suits rims with an external section of 20-24mm, Medium suits 25-29mm and Large suits 30-34mm wide rims. Once the strip and valves are installed you can install your tubeless or tubeless-ready tyres, add your sealant of choice, inflate the tyres and you're good to go! You can finally kiss punctures goodbye. The strips and valves are incredibly durable, so you can easily swap them between wheels if you need to. Thanks to the Effetto Mariposa Caffelatex Rim Strip, you no longer need to have a set of expensive tubeless or tubeless-ready wheels to enjoy the benefits of such a setup.
Tubular tyres can be a daunting, difficult and time-consuming proposition for a lot of riders. While clinchers are a comparative breeze to mount, tubulars require glue or less-effective taping in order to be safely mounted. Effetto Mariposa's Carogna Tubular Tape provides all the performance of glue, with the ease of tape.Extremely easy to use, making tubular tyres far quicker to fit safelyProvides excellent adhesion and is highly heat-resistant; perfect for road racingLeaves the rim ready for next gluing or taping when removed.Suitable for road or cyclocross use on carbon or aluminium rimsSize-specific for different rim widthsGluing tubular tyres and rims is both time-consuming and messy. With the need for the glue to set before mounting the tyre, realistically it can take days rather than minutes to safely mount them. This is where Effetto Mariposa's Carogna Tubular Tape provides a key advantage; it is incredibly easy and quick to use and offers incredibly secure adhesion to rival gluing. It also offers excellent heat-resistance, making it perfect for high-performance use where rim temperatures can soar. The tape also leaves no residue, so once removed the rim needs no additional cleaning before it is next glued or more tape is re-applied.Not only is Carogna Tubular Tape extremely easy to use, it is also suitable for both road and cyclocross use, with it being rated to extremely high and low-temperature use. Rim material is not a problem either, as the Carogna Tape is suitable for use with both aluminium and carbon rims. The tape comes in different sizes to suit different rim widths, with the Small width suitable for rims up to 20mm wide, Small/Medium suitable for 21-24mm rims and Medium suitable for the latest modern rims between 25 and 28mm wide. Easy to use and incredibly secure, no longer should you fear tubular tyres thanks to Effetto Mariposa's Carogna Tubular Tape.
Tubular tyres can be a daunting, difficult and time-consuming proposition for a lot of riders. While clinchers are a comparative breeze to mount, tubulars require glue or less-effective taping in order to be safely mounted. Effetto Mariposa's Carogna Tubular Tape provides all the performance of glue, with the ease of tape.Extremely easy to use, making tubular tyres far quicker to fit safelyProvides excellent adhesion and is highly heat-resistant; perfect for road racingLeaves the rim ready for next gluing or taping when removed.Suitable for road or cyclocross use on carbon or aluminium rimsSize-specific for different rim widthsGluing tubular tyres and rims is both time-consuming and messy. With the need for the glue to set before mounting the tyre, realistically it can take days rather than minutes to safely mount them. This is where Effetto Mariposa's Carogna Tubular Tape provides a key advantage; it is incredibly easy and quick to use and offers incredibly secure adhesion to rival gluing. It also offers excellent heat-resistance, making it perfect for high-performance use where rim temperatures can soar. The tape also leaves no residue, so once removed the rim needs no additional cleaning before it is next glued or more tape is re-applied.Not only is Carogna Tubular Tape extremely easy to use, it is also suitable for both road and cyclocross use, with it being rated to extremely high and low-temperature use. Rim material is not a problem either, as the Carogna Tape is suitable for use with both aluminium and carbon rims. The tape comes in different sizes to suit different rim widths, with the Small width suitable for rims up to 20mm wide, Small/Medium suitable for 21-24mm rims and Medium suitable for the latest modern rims between 25 and 28mm wide. Easy to use and incredibly secure, no longer should you fear tubular tyres thanks to Effetto Mariposa's Carogna Tubular Tape.
Tubular tyres can be a daunting, difficult and time-consuming proposition for a lot of riders. While clinchers are a comparative breeze to mount, tubulars require glue or less-effective taping in order to be safely mounted. Effetto Mariposa's Carogna Tubular Tape provides all the performance of glue, with the ease of tape.Extremely easy to use, making tubular tyres far quicker to fit safelyProvides excellent adhesion and is highly heat-resistant; perfect for road racingLeaves the rim ready for next gluing or taping when removed.Suitable for road or cyclocross use on carbon or aluminium rimsSize-specific for different rim widthsGluing tubular tyres and rims is both time-consuming and messy. With the need for the glue to set before mounting the tyre, realistically it can take days rather than minutes to safely mount them. This is where Effetto Mariposa's Carogna Tubular Tape provides a key advantage; it is incredibly easy and quick to use and offers incredibly secure adhesion to rival gluing. It also offers excellent heat-resistance, making it perfect for high-performance use where rim temperatures can soar. The tape also leaves no residue, so once removed the rim needs no additional cleaning before it is next glued or more tape is re-applied.Not only is Carogna Tubular Tape extremely easy to use, it is also suitable for both road and cyclocross use, with it being rated to extremely high and low-temperature use. Rim material is not a problem either, as the Carogna Tape is suitable for use with both aluminium and carbon rims. The tape comes in different sizes to suit different rim widths, with the Small width suitable for rims up to 20mm wide, Small/Medium suitable for 21-24mm rims and Medium suitable for the latest modern rims between 25 and 28mm wide. Easy to use and incredibly secure, no longer should you fear tubular tyres thanks to Effetto Mariposa's Carogna Tubular Tape.