Fizik Antares R1 Open Road Bike SaddleWith its neutral shape and pressure-relieving cut-out, the Antares R1 Open model is an ideal road bike saddle choice for endurance cyclists. Lightweight, supportive and with a slight amount of flexibility in its shell, it helps you to easily find your ideal riding position for optimum power output.A Saddle for Medium FlexibilityThis saddle is ideal for riders with a medium amount of spine flexibility and those who have a minimal amount of pelvis rotation when pedalling.Advanced Shell DesignThe shell is a carbon fibre reinforced nylon, which features Wing Flex technology to enable the full natural movement of the pelvis. This improves comfort and maximises pedalling efficiency and with the addition of Fizik's Comfort Core foam and a Microtex cover, the comfort level is enhanced even further.Carbon Fibre RailsA high-quality carbon-reinforced shell isn’t the only major plus point with this saddle, it also has braided carbon rails. These rails are strong and lightweight and combine with the shell to give you optimum pedalling efficiency.Features:Cover Material: MicrotexShell Material: Carbon-reinforced nylonRail Material: 7x10mm Carbon BraidedUse: RoadOpen central cutawayIntegrated Clip System compatibleDimensions (LxW): Regular: 274x140mm; Large: 274x152mmWeight: Regular: 185g; Large: 190gBuy Fizik Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
This Shimano Di2 Bluetooth frame or bar plug mount allows you to charge and check the battery level of your Shimano Di2 electronic shifting system. Thanks to its Bluetooth-compatible design (Bluetooth module available separately), you can easily connect to your Shimano Di2 to change shift modes such as manual shift, synchronized shift 1 and synchronized shift 2. Its built-in LED lights will illuminate to indicate the mode you have selected by a green or red light system. If your bike receives a strong impact, the rear derailleur (RD) protection function kicks in and the connection between your motor and the link is momentarily severed so that the rear derailleur will no longer operate. This is done in order to protect the system at times such as if the bike falls over. The Shimano Di2 junction box allows you to press the button on junction (A) to restore the connection between the motor and the link and to clear the RD Protection function for the rear derailleur. To top it off, this handy device features water-resistant connectors so you can keep your Di2 running in peak performance, whatever the weather conditions. Please note: You need the additional Bluetooth module Shimano SM-EWWU111 to enable Bluetooth. This Shimano SM-EWWU111 unit allows you to connect to a Bluetooth device once installed however, the EW-RS910 alone does not allow for this functionality and would work in tandem with the Shimano SM-EWWU111.
Fizik Antares R3 Colour Edition SaddleThis limited edition road bike saddle features a hard-wearing microtex cover that's ready for wherever your road journey takes you. Fizik has also kitted it out with a carbon thermoplastic composite shell, which delivers an excellent balance of comfort, low weight and flexibility, making it ideal for transferring all of your leg power to your pedals. Thanks to its shell's Wing Flex technology, this model benefits from additional flexibility along its edges where your inner thighs make contact with the saddle. This extra flexibility means you can achieve a full range of leg movement in a wider range of positions. Another highlight is its K:ium alloy rails, which provide a strong and secure hold to your seatpost so you can stay in full control as you clock up the miles. Drawing inspiration from the aesthetics of the Arione saddle, this limited colour version adds some extra style to your ride with its eye-catching design.Antares R1 is for The Chameleon: Medium SpineIf you have an intermediate degree of spinal flexibility (approximately 90 degrees between your straight legs and your back when bending over as far as you can, keeping your legs straight a shoulders' width apart), you are a chameleon. Your degree of spinal flexibility helps you so far, before you need to rotate your pelvis slightly to achieve fully the performance position.You will benefit from the increased width and slight curvature of the Antares shape.Features: Cover Material: Microtex Shell Material: Carbon Thermoplastic Composite with Wing Flex Rails Material: K:ium Alloy Thigh Glides: Microtex Use: Road Size: Large: 275x152mm Integrated Clip System: Yes Weight: 205gTechnologies: Integrated Clip System: The Integrated Clip System (ICS) is an integrated interface in the saddle's base to allow quick attachment and removal of ICS accessories such as the Fi'zi:k saddle Pa:k and Blin:k light. It is a clean, easy, fast and secure attachment that does not require any tools. K:ium Rails: K:ium is a Fizik proprietary rail formulation. It's the combination of a particular metal alloy, a specific tubular design and a special finishing process that increases fatigue performance on the rail surface. Fact: 8% weight reduction compared to solid titanium. K:ium features a high strength-to-weight ratio grade and high corrosion resistance. Wing Flex Technology: Wing Flex shell has engineered flexibility along the edges where the inner thighs contact the saddle. By allowing this area to flex, the rider can achieve a full range of leg movement in a wide range of riding positions. Wing Flex allows the saddle to adapt to the rider rather than the rider having to get used to the saddle.Manufacturer's Part Number: 74B1SWSA69653 Black/Green L Large 152mmBuy Fizik Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Antares is 1 of fi’zi:k’s 3 Spine Concept™ Mens Road Saddle shapes.Of these three, the Antares shape is wide and slightly curved in profile. The carbon thermoplastic composite shell and carbon braided rail of the Fizik Antares R1 Carbon Bike saddle reduce weight and increase saddle stiffness. Antares R1 is for The Chameleon: Medium Spine If you have an intermediate degree of spinal flexibility (approximately 90 degrees between your straight legs and your back when bending over as far as you can, keeping your legs straight a shoulders’ width apart), you are a chameleon. Your degree of spinal flexibility helps you so far, before you need to rotate your pelvis slightly to achieve fully the performance position. You will benefit from the increased width and slight curvature of the Antares shape.
Fizik Antares R1 Carbon Bike SaddleThe Antares R1 Carbon Bike Saddle from Fizik features a wider shape than their Arione model and benefits from a curved profile which offers more support for your sit bones. Lightweight and StrongThis Antares R1 features improved weight distribution and a host of Fizik technologies like the carbon double shell and Braided Carbon Rail for the optimum blend of strength and support. The Wing Flex permits flexibility, where your thighs meet the saddle.Tipping the scales at 160g, this saddle allows you to remain agile whilst maintaining comfort.The ChameleonIf you have an intermediate degree of spinal flexibility (approximately 90 degrees between your straight legs and your back when bending over as far as you can, keeping your legs straight at shoulders’ width apart), you are a chameleon. Your degree of spinal flexibility helps you up to a point before you need to rotate your pelvis slightly to achieve fully the performance position. Fizik understands that not everyone has the same level of flexibility so they cater for everyone.You will benefit from the increased width and slight curvature of the Antares shape.Don't know if you're a Bull, Chameleon, or Snake? No problem! You can download Fizik's handy spine concept Evo app which tests your flexibility. Simply search for "spine concept Evo" in the iTunes App Store or Google Playstore and download it to your device.For assistance on how to use the App, click HERE.Features:Integrated Clip System compatibleUse: Road, Mountain Bike (MTB)Shell: Composite Carbon co-injected Nylon WingFlexRail: Carbon Braided 7x9mmCover: Black Gummy MicrotexThigh Glides: Black MicrotexDimensions: 274x140mmWeight: 160gBuy Fizik Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Ideal for home workshop use, this set comes with a pair of stainless-steel handles and a threaded axle. In addition, all its bearing gauges and adaptors are made from 6061 aluminium for maximum durability and strength. Lifeline has also housed all of the set in a presentation case, so you can keep everything together and easily store it. The kit is supplied with pairs of gauges to work with the following bearing sizes: R6 6801 6900 608 6802 6901 6800 6803 6902 1728 6804 6903 1526 6805 6000 2437 6806 6001 In addition to the gauges above, this set is supplied with adaptors for installation of hub bearings where it is necessary to have the axle in place to install the last bearing. The additional adaptors/spacers are used to put over the axle, allowing you to safely press the bearing in by pressing against the hub shell without interference from the axle. OD-24mm adapter for 6802(15x24) and 6901(12x24) OD-26mm adapter for 6000(10x26), 6803(17x26) and 15267(15x26) OD-28mm adapter for 6001(12x28), 6902(15x28) and 17287(17x28) OD-30mm adapter for 6903(17x30) Additional spacers / Short x2 + Long x1
The Hiplok Ride Shield features a durable, water repellent and UV resistant material that also has padded protection that prevents damage to your vehicle while also limiting your bike's movement during transit. This car boot protector is also compatible with all car types. Ride Shield protects your bike and car in transit. Constructed from padded water-repellent toughened nylon, Ride Shield keeps your interior clean from oil, grease and mud while the trunk lip cover prevents paintwork scratch to bike or car when loading and unloading. When you leave your bike unattended in a parked car, Ride Shield’s integrated security cover and large storage pockets keep your bike and gear out of sight, giving you complete peace of mind to enjoy your ride.
Hamax top model rear seat, the Caress, is an innovative bicycle child seat with an abundance of high-quality details. The seat is equipped with an adjustable seat back and a recline function of 20°. All adjustments are designed for one-handed operation so you can use the other hand to stabilize the bike when securing your child.Extra thick and comfortable paddingHarness with shoulder paddingsReflective in the back for improved visibilityMay be fitted to bikes with or without luggage carriersSimple mounting only four screwsProvides suspension to the seatSpring-loaded, you will hear a «click» when the bracket is safely lockedGreen indicators appear when the bars are correctly mountedQuick release system, press the front of the bracket and disconnect the barMinimum age: 9 Months* (reflects approximate age when child can hold head upright without support).Max Child Weight: 22kgReclining: Yes 20°Fits frame diameters: 28-40mm20° ergonomic resting position - Simple, one-handed reclining dial can be adjusted without having to dismount your bike. Variable sleep positions up to 20 degrees allows your child to ride in comfort and maintain an ideal head position while at restHelmet recess - Allows the child s head to sit comfortably without being pushed forward.Shock absorption - Designed to provide optimal comfort for you and your co-passenger, the seat has a dual-bar steel suspension system to provide a seamless and smooth ride for your little one.Reflectors for increased visibility - Adhered to back of seat for visibility at night.Grows with your child - Adjustable, sliding backrest accommodates varied heights for a secure, ideal fit to meet the demands of a growing family.
Hamax top model rear seat, the Caress, is an innovative bicycle child seat with an abundance of high-quality details. The seat is equipped with an adjustable seat back and a recline function of 20°. All adjustments are designed for one-handed operation so you can use the other hand to stabilize the bike when securing your child.Extra thick and comfortable paddingHarness with shoulder paddingsReflective in the back for improved visibilityMay be fitted to bikes with or without luggage carriersSimple mounting only four screwsProvides suspension to the seatSpring-loaded, you will hear a «click» when the bracket is safely lockedGreen indicators appear when the bars are correctly mountedQuick release system, press the front of the bracket and disconnect the barMinimum age: 9 Months* (reflects approximate age when child can hold head upright without support).Max Child Weight: 22kgReclining: Yes 20°Fits frame diameters: 28-40mm20° ergonomic resting position - Simple, one-handed reclining dial can be adjusted without having to dismount your bike. Variable sleep positions up to 20 degrees allows your child to ride in comfort and maintain an ideal head position while at restHelmet recess - Allows the child s head to sit comfortably without being pushed forward.Shock absorption - Designed to provide optimal comfort for you and your co-passenger, the seat has a dual-bar steel suspension system to provide a seamless and smooth ride for your little one.Reflectors for increased visibility - Adhered to back of seat for visibility at night.Grows with your child - Adjustable, sliding backrest accommodates varied heights for a secure, ideal fit to meet the demands of a growing family.
Hamax top model rear seat, the Caress, is an innovative bicycle child seat with an abundance of high-quality details. The seat is equipped with an adjustable seat back and a recline function of 20°. All adjustments are designed for one-handed operation so you can use the other hand to stabilize the bike when securing your child.Adjustable seat back system to regulate heightAdjustable sleeping position (20°)Integrated paddingFootrest system that can be adjusted one-handedHarness with shoulder paddingsReflective in the back for improved visibilitySafe and simple to fitCarriers must be approved to carry 25 kg (ISO11243)Tube diameters 10-20 mm. Tubes should be round. For all other shapes, make sure the adapter has a secure fit.Enables the seat to be mounted on the existing carrierSuitable for many e-bikesMinimum age: 9 Months* (reflects approximate age when child can hold head upright without support).Max Child Weight: 22kgReclining: Yes 20°Luggage carrier: Width 120-180mm / Diameter 10-20mm / Approved for 25kg20° ergonomic resting position: Simple, one-handed reclining dial can be adjusted without having to dismount your bike. Variable sleep positions up to 20 degrees allows your child to ride in comfort and maintain an ideal head position while at rest.Shock absorption: Designed to provide optimal comfort for you and your co-passenger, the rack mounted option boasts a built-in spring to provide a seamless and smooth ride for your little one.Helmet recess: Allows the child s head to sit comfortably without being pushed forward.Grows with your child: Adjustable, sliding backrest accommodates varied heights for a secure, ideal fit to meet the demands of a growing family.Reflectors for increased visibility: Adhered to back of seat for visibility at night.
Hamax top model rear seat, the Caress, is an innovative bicycle child seat with an abundance of high-quality details. The seat is equipped with an adjustable seat back and a recline function of 20°. All adjustments are designed for one-handed operation so you can use the other hand to stabilize the bike when securing your child.Adjustable seat back system to regulate heightAdjustable sleeping position (20°)Integrated paddingFootrest system that can be adjusted one-handedHarness with shoulder paddingsReflective in the back for improved visibilitySafe and simple to fitCarriers must be approved to carry 25 kg (ISO11243)Tube diameters 10-20 mm. Tubes should be round. For all other shapes, make sure the adapter has a secure fit.Enables the seat to be mounted on the existing carrierSuitable for many e-bikesMinimum age: 9 Months* (reflects approximate age when child can hold head upright without support).Max Child Weight: 22kgReclining: Yes 20°Luggage carrier: Width 120-180mm / Diameter 10-20mm / Approved for 25kg20° ergonomic resting position: Simple, one-handed reclining dial can be adjusted without having to dismount your bike. Variable sleep positions up to 20 degrees allows your child to ride in comfort and maintain an ideal head position while at rest.Shock absorption: Designed to provide optimal comfort for you and your co-passenger, the rack mounted option boasts a built-in spring to provide a seamless and smooth ride for your little one.Helmet recess: Allows the child s head to sit comfortably without being pushed forward.Grows with your child: Adjustable, sliding backrest accommodates varied heights for a secure, ideal fit to meet the demands of a growing family.Reflectors for increased visibility: Adhered to back of seat for visibility at night.
These superb TT handlebar extensions are the perfect compliment for any racing road bike. Adjustable to length, these are specifically designed for triathlon, olympic and sprint distance riding. Their lycra pads with a foam centre provide you with outstanding comfort and meets ITU rules. Weighing in at only 330g, you'll not have to worry about adding any excess weight to your ride.