A new hub seal and bushing is supplied with Nukeproof freehubs. To avoid damage to the hub seal, turn the freehub anti-clockwise as you fit. Please Note: The new hub seal will be fitted to the freehub for transport purposes. This needs to be removed from the freehub by pressing the pawls BEFORE fitting the freehub. Options: Shimano HG Shimano Microspline SRAM XD If you have a HG / XD hub and want to convert to microspline, you will need Nukeproof's microspline conversion kit which can be found here. For step-by-step fitting instructions click here. Freehubs: Installation Instructions: 1. Remove driveside end cap 2. Pull off old freehub turning anticlockwise as you pull 3. Check hub seal for damage, if it is damaged remove the seal 4. If seal was removed, press on new seal 5. Apply grease hub ratchet ring 6. Apply thin grease to freehub pawls & springs then push onto hub shell turning anticlockwise 7. Refit driveside end cap
This kit contains all the parts needed to convert your 148mm Nukeproof Neutron HG / XD hub to have a microspline freehub. Please note this kit requires the hub to be stripped, a step by step guide to do this can be found here.
This set contains four pawls and four springs, plus a plastic cover for the freehub.
142mm, 148mm and 150mm axle options available. You will need to choose the correct axle to suit your hub spacing. Please note that the 148mm axle you require will depend if you are using a HG / XD or Microspline freehub.
These pedal end caps from Nukeproof work with a wide range of Nukeproof alloy pedals. Please see compatibility information in the Top Features section. A guide for rebuilding your Nukeproof Flat pedal can be found here A guide for rebuilding your Nukeproof clipless pedal can be found here
This axle nut tool allows you to remove and tighten the M6 axle nut in your Nukeproof pedals. Genuine Nukeproof tool.
This Bushing kit contains a pair or replacement bushings, which fit Nukeproof pedals. Please see compatibility in the Top Features section.
This kit includes - a tap allowing you to grip the bushing and remove it - an installation tool allowing you to push the new bushing into the pedal body
Fuelled by a passionate team of riders, racers and mechanics, Nukeproof benefits from a wealth of knowledge and experience which can only be developed through years of hands-on experience. Use the right parts with these genuine Nukeproof replacements. Please note: Nuts are not included with this item.
This is a genuine Nukeproof Rear Swingarm Brace Kit for the Nukeproof Pulse mountain bike (MTB) frame.
This rear shock mounting kit includes all parts required to hold the shock in the complete Nukeproof Pulse bike frame.
This Reactor Brake Mount Kit is for use with the rear of the 2020-2022 Nukeproof Reactor frame.