Schwalbe Super Moto-X MTB Tyre (GreenGuard)Ready for everything from tarmac use to aggressive off-road E-MTB riding, this tough tyre brings you the comfort and grip to thrive on all terrain types. Schwalbe has also the Super-Moto-X tyre gives you reliable puncture protection, as there is a Green Guard belt under the tread. In addition to this, this MTB tyre’s sidewalls are reinforced so it’s ready to ride the trails as hard as you dare. E-Bike certified, this tyre is ready to handle the extra torque and speed that power-assisted bikes deliver.Reasons to Buy: Fantastic comfort and grip. Reliable puncture protection. Reinforced sidewalls. E-bike certified.Features: Tyre Type: Clincher Bead Type: Wired Compound: Dual Casing: GreenGuard Puncture Protection: Snake Tubeless Compatible: No Pressure: 2.00 - 4.00 Bar (30 - 55 psi) Maximum Load: 145kg EPI: 67 Profile: HS439 Size: ETRTO 62-584 (27.5x2.4") Weight: 1125g (39oz)Technologies: GreenGuard: The insert of highly flexible natural rubber is 3mm thick. Its inner values are also "green". A third of the GreenGuard is produced from recycled latex products. E-Bike Ready 50: Need a special tyre for an E-bike? - In standard pedal assisted E-Bikes that have motor assist up to 25km/h, there is no legal requirement for a special tyre. But even with these bikes, loads and average speeds are higher than in regular bikes, therefore Schwalbe recommends only certain tyres as "E-Bike Ready 25". What should you look out for with faster E-bikes? - Special tyres are necessary for fast E-bikes. The best solution is tyres with ECE-R75 certification, valid throughout Europe. All Schwalbe's Energizer tyres bear the mark and are valid on vehicles up to 50km/h. Some Marathon sizes have also the ECE-R75 mark. What's the difference between Energizer and Marathon? - It is in the compound. A Marathon is renowned for its extremely high mileage. The service life of the Energizer models is not bad, but the main focus is on grip and thus safety in high speed cornering. SnakeSkin: One of Schwalbe's most effective inventions for Mountain bikes, SnakeSkin fabric adds only 40-50g per tyre. This makes it the most practical protection against sharp rocks that can easily cut the side wall of light racing tyres. SnakeSkin in rocky terrain is a great callBuy Schwalbe Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Schwalbe Energizer Plus GreenGuard City TyreAn excellent addition to your E-Bike wheel setup, this Energizer Plus road tyre is at home on the commute and unpaved ground. This tyre features a diamond-shaped tread pattern for a fast roll, with a grippy side design which allows the braking to be as composed as can be. Performance-Enhancing GreenGuardThis enhanced version of the Energizer tyre comes complete with Schwalbe's GreenGuard technology, providing reliable puncture protection and making this tyre a fine fit for touring.Here is a comparison between the ADDIX compounds that shows how they improve performance in relation to the VertStar, TrailStar and PaceStar Compounds.Features: Compound: Addix E Protection: GreenGuard Suitability: E-Bikes, E-50 Skin: Twin Bead: WiredTechnologies: GreenGuard: Featuring a flexible rubber on a 67 EPI carcass on the classic Marathon tyres, providing exceptional performance and superb service-life. Buy Schwalbe Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Shimano STEPS E7000 Drive Unit Cover Mount BoltShimano's SM-DUE70-B drive unit cover offers a clean and simple E-bike look with the mount bolt exposed for Shimano STEPs E7000 E-bike drive systems.Features:Use: E-bikeAvailable DU Angle: 0 - 60Type: Drive Unit cover mountCompatibility: Shimano STEPS E7000 E-bike drive systemsA 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Topeak Defender XC11 Rear Bike MudguardWith its simple tool-free seatpost mounting collar meaning it can be fitted in seconds, the Defender XC11 gives your back wheel excellent coverage for riding on wet and muddy terrain. Topeak has made it from impact-resistant plastic so it’s ready for all the abuse that the trails can hand out. Plus, the easy to use mount on this mudguard is compatible with seatpost sizes ranging from 25.4-34.9mm. It’s also suitable for tyre widths up to 2.5”, ensuring compatibility with wide mountain bike (MTB) tyres.Features: Material: Injection Moulded High Impact Resistant Plastic Wheel Size: Separate options for 27.5" and 29" wheels Maximum Tyre Width: 27.5": 27.5x2.5"; 29": 29x2.5". Highly polished underside Quick Release Seat Tube Attachment Two-Tone Injected High Impact Resistant Plastic Multiple Angles Adjustable Dimensions: 27.5": 62x10.2x7cm / 24.4 x 4" x 2.8"; 29": 67x10.2x7.5cm / 26.4" x 4" x 3" Weight: 27.5": 215g/7.57oz; 29": 220g / 7.74ozBuy Topeak Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
SKS Velo 55 Cross Mudguard SetWhether city or off-road, no matter where you travel, the SKS VELO mudguards are a reliable companion for you.Whether in town or on meadow tracks - the SKS VELO 55 CROSS mudguards are the ideal companions. After initial assembly, the clip-on mudguards can be attached to almost any frame tubes without tools using the practical universal fastening. Durable and Stylish Mudguard SetU-stays equipped with an ESC safety system are also available as an option. Made of black high-performance impact-resistant plastic with an integrated SKS logo, the mudguards also visually enhance your bike.Features: Made of high-performance impact-resistant plastic Rim: 28" Universal fastening without any tools after the initial assembly Optionally also with stay mounting clamps Ideal for all surfaces Made in Germany Weight: 232gPlease Note: SKS U-Stays are sold separately.Buy SKS Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Lezyne GPS Bike Computer Forward CNC MountA lightweight, rugged and CNC machined aluminium aero bicycle style mount that helps you streamline your handlebar kit. The mount is easy to install and works with most bike frames and is compatible with Lezyne X-Lock mount GPS cycling computers.FeaturesLightweight, rugged CNC machined aluminium constructionAero bicycles style mountSimple, reliable single-pivot 31.8 bar clampSecondary adjustable swivel provides perfect device positioningCompatible with Lezyne X-Lock mount GPS cycling computersExtra secure and replaceable Composite Matrix X-Lock insertRefined aluminium design with classic Lezyne stylingPerfect for the cyclist looking to streamline their cockpitBuy Lezyne Computers from Chain Reaction Cycles, the World's Largest Online Bike Store.
RIDECAMP is your simple, sleek and effective choice for cross-country and light-duty ride needs. Features Lightweight slip-on sleeves. Pre-curved chassis for attack position. Lightly padded nylon anti-abrasion outer skin. Fully perforated neoprene chassis for breathability. Tacky silicone elastic webbing to prevent slippage. Fully ventilated rear mesh for maximum cooling. CE Directive 89/686/EEC MTB.
A percentage of the proceeds from the sales of these grips are used to support NSMBA in British Columbia and trail building on the North Shore. Weight: 125 grams Length: 130 mm Diameter: Large (33 mm)
The legend of Yeti continues with the Yeti Lock-On Grip designed to provide equal parts comfort and control. Features: Large raised Yeti logo pad offer exceptional comfort Smaller angled logos strategically placed for optimal traction Lock-On Grip System = 100% Slip Free performance Includes new Snap Cap™ End Plugs
Snapback closure with embroidered Vans branding to the front and ventilation holes. 100% Cotton.
United's alloy bar end. 6061 Alloy with a 30mm Face and 6.5mm Depth. A classic and reliable design.
Plastic hub guard from Merritt. By using a heat-treated 4140 chromoly core, the replaceable plastic sleeve can be extra thick without making the guard too big, keeping everything super strong and long lasting. Works perfectly with all of our rear hubs and includes washers to work with most other hubs with threaded 14mm axles. Replaces non-driveside hardware. Weight: 68g / 2.4oz.