Ready for fast-paced MTB rides, this top guide features a hard-wearing alloy backplate with a composite top guide. This makes it perfect for withstanding all the abuse associated with aggressive off-road adventures. Nukeproof has also equipped this trail-ready model with a soft rubber co-moulded into it. This also reduces wear and noise from your chain and increases its longevity. This guide fits all bikes with an ISCG 05 mount and comes with various washers allowing you to fine tune your chainline setup. Download instructions here Click here for a Step by Step Installation Guide Please note: Due to the main pivot position on Specialized Stumpjumper bikes, this chain guide is not compatible. Manufacturer Part Numbers: Copper: NPCHAGUITG Black: NPCHAGUITGBLK Blue: NPCHAGUITGBLU Grey: NPCHAGUITGGRY Purple: NPCHAGUITGPUR Red: NPCHAGUITGRED
This guide features an alloy backplate with a composite top guide. This makes it more than capable of handling all the intensity as you blast across the mountain. Nukeproof has also kitted this trail-ready top guide out with a soft rubber co-moulded into it. As a result, it reduces wear and noise from your chain while also increases its longevity. MTB Top Guide with Bashguard Ready for fast-paced off-road adventures, this top guide also comes equipped with two bashguards. This allows you to choose from a guard for 32T chainrings or a guard for up to 36T chainrings, so you have everything you need. One final highlight, is it comes complete with stainless steel hardware. This means you'll enjoy its superb strength in all-weather conditions. This guide fits all bikes with an ISCG 05 mount and comes with plenty of washers to allow you to fine tune your chainline setup. Download instructions here Click here for a Step by Step Installation Guide Please note: Due to the main pivot position on Specialized Stumpjumper bikes, this chain guide is not compatible. Manufacturer Part Numbers: Copper: NPCHAGUITGWB Black: NPCHAGUITGWBBLK Blue: NPCHAGUITGWBBLU Grey: NPCHAGUITGWBGRY Purple: NPCHAGUITGWBPUR Red: NPCHAGUITGWBRED
Nukeproof Crown Race Genuine replacement Crown Race from Nukeproof Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Giga Mountain Bike Mudguard KitThis Giga Carbon Mud Guard Kit is for use with the 2021-2022 Giga Carbon Frame.Features: 1x FB-GUO-131 - Mud Guard 3x FB-GAN-048 - Mud Guard BoltBuy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon Advanced Rim Defence - ARD PAIRThe Advanced Rim Defence (ARD) from MTB specialists Nukeproof has been developed to prevent damage to your rims and to stop punctures. Boasting a unique design, they have been developed over two years in collaboration with CRC sponsored downhill and enduro athletes and staff. During development, Nukeproof paid careful attention to the overall weight too, bringing a 29" insert at 144g and a 27.5” insert at 130g.Mountain Bike Rim ProtectorBy using closed cell foam technology, the A.R.D is a very lightweight tyre insert, yet it offers you lots of protection. It enables you to run your tyres at much lower pressures without risking flats, plus gives you much increased grip for thrashing around the trails. In fact, it's so good that Kelan Grant, a CRC-Mavic sponsored rider was able to complete a stage of the EWS on just his A.R.D as his tyre had split.MTB Tubeless Tyre Values IncludedIncluded in the box, you'll receive your A.R.D Inserts and two copper coloured tubeless valves. Specifically created for Nukeproof, these valves enable the quick inflation and deflation with the A.R.D installed in the wheel. Want to shorten ARD to fit in smaller wheels? Download a step by step guide here Features: Easy to fit and remove tyre Offers Pinch flat protection Offers Rim protection Will not absorb sealant Works with all rims which have an inner width from 19mm to 35mm Options: 27.5": Pair of 27.5" inserts; 29": Pair of 29" inserts; Mullet: 1x 27.5" insert & 1x 29" insert Weight: 130g per 27.5" insert, 144g per 29" insertPatent Pending 1804173.1Buy Nukeproof Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon Advanced Rim Defence - ARD PAIRThe Advanced Rim Defence (ARD) from MTB specialists Nukeproof has been developed to prevent damage to your rims and to stop punctures. Boasting a unique design, they have been developed over two years in collaboration with CRC sponsored downhill and enduro athletes and staff. During development, Nukeproof paid careful attention to the overall weight too, bringing a 29" insert at 144g and a 27.5” insert at 130g.Mountain Bike Rim ProtectorBy using closed cell foam technology, the A.R.D is a very lightweight tyre insert, yet it offers you lots of protection. It enables you to run your tyres at much lower pressures without risking flats, plus gives you much increased grip for thrashing around the trails. In fact, it's so good that Kelan Grant, a CRC-Mavic sponsored rider was able to complete a stage of the EWS on just his A.R.D as his tyre had split.MTB Tubeless Tyre Values IncludedIncluded in the box, you'll receive your A.R.D Inserts and two copper coloured tubeless valves. Specifically created for Nukeproof, these valves enable the quick inflation and deflation with the A.R.D installed in the wheel. Want to shorten ARD to fit in smaller wheels? Download a step by step guide here Features: Easy to fit and remove tyre Offers Pinch flat protection Offers Rim protection Will not absorb sealant Works with all rims which have an inner width from 19mm to 35mm Options: 27.5": Pair of 27.5" inserts; 29": Pair of 29" inserts; Mullet: 1x 27.5" insert & 1x 29" insert Weight: 130g per 27.5" insert, 144g per 29" insertPatent Pending 1804173.1Buy Nukeproof Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon Advanced Rim Defence - ARD PAIRThe Advanced Rim Defence (ARD) from MTB specialists Nukeproof has been developed to prevent damage to your rims and to stop punctures. Boasting a unique design, they have been developed over two years in collaboration with CRC sponsored downhill and enduro athletes and staff. During development, Nukeproof paid careful attention to the overall weight too, bringing a 29" insert at 144g and a 27.5” insert at 130g.Mountain Bike Rim ProtectorBy using closed cell foam technology, the A.R.D is a very lightweight tyre insert, yet it offers you lots of protection. It enables you to run your tyres at much lower pressures without risking flats, plus gives you much increased grip for thrashing around the trails. In fact, it's so good that Kelan Grant, a CRC-Mavic sponsored rider was able to complete a stage of the EWS on just his A.R.D as his tyre had split.MTB Tubeless Tyre Values IncludedIncluded in the box, you'll receive your A.R.D Inserts and two copper coloured tubeless valves. Specifically created for Nukeproof, these valves enable the quick inflation and deflation with the A.R.D installed in the wheel. Want to shorten ARD to fit in smaller wheels? Download a step by step guide here Features: Easy to fit and remove tyre Offers Pinch flat protection Offers Rim protection Will not absorb sealant Works with all rims which have an inner width from 19mm to 35mm Options: 27.5": Pair of 27.5" inserts; 29": Pair of 29" inserts; Mullet: 1x 27.5" insert & 1x 29" insert Weight: 130g per 27.5" insert, 144g per 29" insertPatent Pending 1804173.1Buy Nukeproof Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
A.R.D uses closed cell foam’s technology to make a lightweight tyre insert which gives you a lot of protection. A.R.D will enable you to run lower pressures without getting flats and in turn assist you to increase your grip out on the trails. Keeping weight down was a key factor in the development of ARD, a 27.5” insert will weigh 130g. Rider Kelan Grant has been using the same A.R.D for the 2018 EWS season, this includes riding a stage on just the ARD as his tyre split. In the box you will get a pair of A.R.D Inserts and a pair of copper coloured tubeless valves. The tubeless valves have been specially made for Nukeproof to allow you to inflate and deflate the tyre easily with A.R.D fitted in the wheel. Want to shorten ARD to fit in smaller wheels? Download a step by step guide here How To Fit ARD Video Guide
Nukeproof Horizon Front MudguardThe Nukeproof HZN mudguard is designed to be used on your forks to help prevent water, mud and grime from spraying on to your face. This mudguard is compatible with boost and non-boost models while also being ideal for use with forks up to 200mm travel. There are two different-height mounting hole points on the side of the guard, so you can tailor its fit on your bike. Plus, the front of the guard features a nose, which sits snug against your fork leg to ensure the most secure fit.Click here to view how to fit your Horizon Mudguard.Features: Prevents water, mud and grime spray Compatible with Boost and Non-boost forks Two mounting heights Includes 4x cable ties for installation Provides a secure fit for maximum protectionBuy Nukeproof Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Compatible with boost and non-boost fork models and is also effective for use with forks up to 200mm travel, it features two different height mounting hole points on the side so you can be sure of the perfect fit. Also, for the greatest performance Nukeproof has optimised the design to have a nose at the front so it sits snug against your fork legs. Click here to view how to fit your Horizon Mudguard.
Nukeproof Horizon V2 Wheel ARD and Sealant BundleComing equipped with the brand's extensively trailed and tested alloy blend, this wheelset features a rim construction that's specifically made to meet the demands of both enduro and downhill (DH) riders. Producing a hardness similar to 7-series alloy but with the ductility and yield properties of a 6-series, it gives you the best of both worlds in terms of strength, stiffness and weight.Both rims have the same profile, but the rear has a thicker sidewall for added strength on the trails. Another benefit is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is quick and easy.Enduro ABEC 5 BearingsAfter extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this wheelset. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time penetrating. LLU seals are similar, only the contact pressure or interference fit is greater to seal better. Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side. This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free.Nukeproof Horizon V2 HubThe Nukeproof Horizon V2 rear hub has 102 points of engagement and comes in a range of freehub options. Freehubs are also available separately and easily changeable if you choose to upgrade your drivetrain in the future.The 148mm HG / XD hub can be converted to 141mm using end caps. The hub has also been machined to remove excess material and make it as strong and light as possible. Nukeproof has fitted these hubs with its louder pawls and springs, this gives the wheel a nice buzz as you head down the trail. If you prefer the quiet life, you can get the quieter ones which are available separately.What's Included?Wheels come taped with a tubeless valve installed, so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the new Nukeproof Horizon valve which is compatible with Nukeproof ARD and other tyre inserts as well as the cap having a core remover built-in.A pair of ARD inserts are also supplied to give you maximum protection and there is a 500ml bottle of lifeline sealant in the box too, all you need to do is add your favourite tyres.By using closed cell foam technology, the A.R.D is a very lightweight tyre insert, yet it offers you lots of protection. It enables you to run your tyres at much lower pressures without risking flats, plus gives you a much-increased grip for thrashing around the trails. In fact, it's so good that Kelan Grant, a CRC-Mavic sponsored rider was able to complete a stage of the EWS on just his A.R.D as his tyre had split.Features: Rim Material: Alloy Nukeproof Blend Use: Mountain Bike (MTB), All Mountain (AM), Enduro and Downhill (DH) Axle Spacing: Front: 15x110mm; Rear 12x148mm Rim Width: Inner: 30mm; 35mm Rim Height: 21.6mm Tubeless Ready: Yes, pre-taped and valve supplied Brake Rotor Compatibility: 6-bolt disc brake Conversion Options: 148x12mm HG / XD can be converted to 141mm Boost with end caps (sold separately) Freehub Options: Shimano HG, Shimano Microspline and SRAM XD (choose freehub option from the menu) Rear Hub Engagement: 102 points of engagement (every 3.52°) Spoke Type: J-Bend Spoke Count: 32 Lacing Pattern: 3x Build: Hand built Supplied with: Pair of wheels, valves, pre-taped, pair of ARD tyre inserts, 500ml bottle of Lifeline sealant Single or Pair: Pair Weight: Front: 897g; Rear: 1146g, ARD: 144g each (Weights include tape & valve)A full range of spares are available to service your hub in the future.141mm rear conversion kit for HG / XD freehubs available separately. Caps Nukeproof Part Number Replacement or Conversion Rear 141mm NUKHORV2R141BCAPS Convert Boost 148mm HG / XD hub to 141mm QR Manufacturer's Part Numbers: NUKHOR2021BF29HG Black HG 29" NUKHOR2021BF29XD Black XD 29" NUKHOR2021BF29MS Black MS 29" NUKHOR2021BF275HG Black HG 27.5" NUKHOR2021BF275XD Black XD 27.5" NUKHOR2021BF275MS Black MS 27.5"Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon V2 Wheel ARD and Sealant BundleComing equipped with the brand's extensively trailed and tested alloy blend, this wheelset features a rim construction that's specifically made to meet the demands of both enduro and downhill (DH) riders. Producing a hardness similar to 7-series alloy but with the ductility and yield properties of a 6-series, it gives you the best of both worlds in terms of strength, stiffness and weight.Both rims have the same profile, but the rear has a thicker sidewall for added strength on the trails. Another benefit is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is quick and easy.Enduro ABEC 5 BearingsAfter extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this wheelset. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time penetrating. LLU seals are similar, only the contact pressure or interference fit is greater to seal better. Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side. This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free.Nukeproof Horizon V2 HubThe Nukeproof Horizon V2 rear hub has 102 points of engagement and comes in a range of freehub options. Freehubs are also available separately and easily changeable if you choose to upgrade your drivetrain in the future.The 148mm HG / XD hub can be converted to 141mm using end caps. The hub has also been machined to remove excess material and make it as strong and light as possible. Nukeproof has fitted these hubs with its louder pawls and springs, this gives the wheel a nice buzz as you head down the trail. If you prefer the quiet life, you can get the quieter ones which are available separately.What's Included?Wheels come taped with a tubeless valve installed, so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the new Nukeproof Horizon valve which is compatible with Nukeproof ARD and other tyre inserts as well as the cap having a core remover built-in.A pair of ARD inserts are also supplied to give you maximum protection and there is a 500ml bottle of lifeline sealant in the box too, all you need to do is add your favourite tyres.By using closed cell foam technology, the A.R.D is a very lightweight tyre insert, yet it offers you lots of protection. It enables you to run your tyres at much lower pressures without risking flats, plus gives you a much-increased grip for thrashing around the trails. In fact, it's so good that Kelan Grant, a CRC-Mavic sponsored rider was able to complete a stage of the EWS on just his A.R.D as his tyre had split.Features: Rim Material: Alloy Nukeproof Blend Use: Mountain Bike (MTB), All Mountain (AM), Enduro and Downhill (DH) Axle Spacing: Front: 15x110mm; Rear 12x148mm Rim Width: Inner: 30mm; 35mm Rim Height: 21.6mm Tubeless Ready: Yes, pre-taped and valve supplied Brake Rotor Compatibility: 6-bolt disc brake Conversion Options: 148x12mm HG / XD can be converted to 141mm Boost with end caps (sold separately) Freehub Options: Shimano HG, Shimano Microspline and SRAM XD (choose freehub option from the menu) Rear Hub Engagement: 102 points of engagement (every 3.52°) Spoke Type: J-Bend Spoke Count: 32 Lacing Pattern: 3x Build: Hand built Supplied with: Pair of wheels, valves, pre-taped, pair of ARD tyre inserts, 500ml bottle of Lifeline sealant Single or Pair: Pair Weight: Front: 897g; Rear: 1146g, ARD: 144g each (Weights include tape & valve)A full range of spares are available to service your hub in the future.141mm rear conversion kit for HG / XD freehubs available separately. Caps Nukeproof Part Number Replacement or Conversion Rear 141mm NUKHORV2R141BCAPS Convert Boost 148mm HG / XD hub to 141mm QR Manufacturer's Part Numbers: NUKHOR2021BF29HG Black HG 29" NUKHOR2021BF29XD Black XD 29" NUKHOR2021BF29MS Black MS 29" NUKHOR2021BF275HG Black HG 27.5" NUKHOR2021BF275XD Black XD 27.5" NUKHOR2021BF275MS Black MS 27.5"Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.