This XT level press-fit bottom bracket assembly is designed for Shimano HollowTech II MTB cranks and features fibre reinforced polymer cups to reduce the risk of noise and frame damage during installation/removal. The sealed design protects the bearings from dirt and water ingress, and ensure the product is maintenance free during it's lifespan. Suitable For 89.5mm Or 92mm BB Shells.
Genuine Shimano HollowTech II bottom bracket assembly. Set includes left and right hand cups, spacers, inner cover, and inner O-rings. The length of screw thread is increased to enable the fitment of BB mount chain devices if needed. Light weight seal structure helps to remove vital grams, and the sealed cups keep out dirt and water for a simple maintenance free set up.
Shimano's Deore XT RT-RT800 compact and lightweight disc brake rotors feature rapid heat dissipation thanks to Ice Technologies Freeza heat management system. Installing and removing the rotors is quick and easy with Shimano s centre lock design.New disc brake rotor construction boosts heat dissipation and reduces fadeEasy disc brake rotor installation with spline mount and lock ringAdvanced heat sync design reduces brake fadeLightweight clad rotors with heat dissipating paint on exposed aluminium layer segments provide superior cooling, consistent brake performance, and lighter operation under all conditions.Clad brake pads with Aluminium/Stainless fins support rapid heat dissipation which helps reduce maintenance, provide longer pad life, and create less brake fade and noise.Featuring Ice Technologies combined with Freeza disc brake rotor construction rapidly dissipates heat for more consistent braking performance in extreme conditions, longer pad life, and less brake fade and noise. Clad brake pads with Aluminium/Stainless fins support rapid heat dissipation which helps reduce maintenance, provide longer pad life, and create less brake fade and noise.
The Shimano Disc Brake Flat Mount Adaptors convert post mount calipers to fit flat mount forks and frames. There is also an adaptor to convert a flat mount 140mm caliper to flat mount 160mm rear, to convert a flat mount 140mm to 160mm front simply rotate the 140mm front adaptor included with the brake.
Treat yourself to some premium, high performance mountain biking footwear with the Shimano ME7 (ME702) SPD MTB Shoes. Perfect for any mountain bike discipline these shoes give you total comfort, reinforced armour protection and total adjustability for a great fit.Reinforced armour provides great protection and excellent durabilityUnique TORBAL carbon reinforced midsole gives excellent pedalling efficiencyExpanded shoe cleat adjustment range to help riders optimise their set up for extreme terrainSpeed lacing system adapts to wide range of foot shapes with a secure fitMichelin high-performance, dual-density rubber outsole offers superior tractionShimano have made the ME7 shoes to give you the superb pedalling efficiency that rivals that of an XC shoe. A more natural feel has been achieved from the torsional midsole helping to improve your flow with a new and improved motion during downhill descents. The shoe has then been beefed up with reinforced armour to protect your feet and a stretch neoprene ankle collar that will fend off flying trail debris. For the fit and comfort Shimano have equipped the ME7 shoes with the speed lacing system which easily adapts to the shape of your foot and alongside the reverse mount buckle the shoes are comfortably secured in place. The extra cushion insole ups your comfort levels while for the outsole there is Michelin high-performance, dual density rubber giving superior traction both on and off the bike. Size Chart:
Replacement Di2 wire for Shimano Di2 systems. The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts.E-tube STEPS EP8 uses a fully removable individual cable system enabling fine tuning with the correct cable length to each component for easy and tidy fitmentEW-SD300 wires use a slim 3.45 mm diameter plug, they can be connected to EW-SD50 wires with the use of EW-AD305 adapterEW-SD300 individual wires are available in varying lengths, there is no need (or facility) to cut these cablesReliable and secure water resistant connectors
Replacement Di2 wire for Shimano Di2 systems. The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts.E-tube STEPS EP8 uses a fully removable individual cable system enabling fine tuning with the correct cable length to each component for easy and tidy fitmentEW-SD300 wires use a slim 3.45 mm diameter plug, they can be connected to EW-SD50 wires with the use of EW-AD305 adapterEW-SD300 individual wires are available in varying lengths, there is no need (or facility) to cut these cablesReliable and secure water resistant connectors
Replacement Di2 wire for Shimano Di2 systems. The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts.E-tube STEPS EP8 uses a fully removable individual cable system enabling fine tuning with the correct cable length to each component for easy and tidy fitmentEW-SD300 wires use a slim 3.45 mm diameter plug, they can be connected to EW-SD50 wires with the use of EW-AD305 adapterEW-SD300 individual wires are available in varying lengths, there is no need (or facility) to cut these cablesReliable and secure water resistant connectors
Replacement Di2 wire for Shimano Di2 systems. The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts.E-tube STEPS EP8 uses a fully removable individual cable system enabling fine tuning with the correct cable length to each component for easy and tidy fitmentEW-SD300 wires use a slim 3.45 mm diameter plug, they can be connected to EW-SD50 wires with the use of EW-AD305 adapterEW-SD300 individual wires are available in varying lengths, there is no need (or facility) to cut these cablesReliable and secure water resistant connectors
Replacement Di2 wire for Shimano Di2 systems. The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts.E-tube STEPS EP8 uses a fully removable individual cable system enabling fine tuning with the correct cable length to each component for easy and tidy fitmentEW-SD300 wires use a slim 3.45 mm diameter plug, they can be connected to EW-SD50 wires with the use of EW-AD305 adapterEW-SD300 individual wires are available in varying lengths, there is no need (or facility) to cut these cablesReliable and secure water resistant connectors
Road riding has never been this much fun. That's because the redesigned Ultegra ST-R8170 Dual Control Levers have all-new ergonomics, even more precise brake modulation, and wireless electronic shifting. This trifecta lets you focus on the next sprint, the next descent, or the next joke from your riding partner.Shimano's new Ultegra ST-R8170 brake levers bring enhanced modulation and control to every ride by employing Shimano's proven Servo Wave technology. The all-new Di2 platform, used on both Dura-Ace and Ultegra, untethers the shifters while delivering our fastest, most reliable wireless shifting. Your time on the bike is precious, let Shimano make it even better.High performance Ultegra Wireless hydraulic Servo Wave disc brake Di2 STI's give you control, modulation and power with minimal effort in all riding conditionsWireless connectivity to the front and rear derailleurs for effortless trouble free gear shiftsWith Di2 technology shifting is easy and precise - just a light touch, as soft as a mouse click, is sufficient for the front or rear derailleur to instantaneously select the correct gearFull and semi synchronized shifting programable, Synchro shift compatible meaning a single shifter can control both front and rear shifting which can be fully custom tuned to your riding preferences. Semi synchronized shifting means when a front shift is made the rear mech will automatically correct to the appropriate ratioSimply pressing tactile buttons allows effortless and comfortable shifting even when your hands are coldDrop bar STI with shift buttons located in a near identical place to the positions you'd assume shifting using a mechanical Shimano STIHydraulic brake lever with Servo Wave provides excellent stopping power with less effort especially from the hood positionHydraulic reservoir tank provides pad to rotor clearance auto-adjust maintaining braking performance during pad wearFinely tuneable reach adjusters for the levers enable custom fitment for all handsLevers use CR1632 batteries which last for approximately 1.5-2 years
Road riding has never been this much fun. That's because the redesigned Ultegra ST-R8170 Dual Control Levers have all-new ergonomics, even more precise brake modulation, and wireless electronic shifting. This trifecta lets you focus on the next sprint, the next descent, or the next joke from your riding partner.Shimano's new Ultegra ST-R8170 brake levers bring enhanced modulation and control to every ride by employing Shimano's proven Servo Wave technology. The all-new Di2 platform, used on both Dura-Ace and Ultegra, untethers the shifters while delivering our fastest, most reliable wireless shifting. Your time on the bike is precious, let Shimano make it even better.High performance Ultegra Wireless hydraulic Servo Wave disc brake Di2 STI's give you control, modulation and power with minimal effort in all riding conditionsWireless connectivity to the front and rear derailleurs for effortless trouble free gear shiftsWith Di2 technology shifting is easy and precise - just a light touch, as soft as a mouse click, is sufficient for the front or rear derailleur to instantaneously select the correct gearFull and semi synchronized shifting programable, Synchro shift compatible meaning a single shifter can control both front and rear shifting which can be fully custom tuned to your riding preferences. Semi synchronized shifting means when a front shift is made the rear mech will automatically correct to the appropriate ratioSimply pressing tactile buttons allows effortless and comfortable shifting even when your hands are coldDrop bar STI with shift buttons located in a near identical place to the positions you'd assume shifting using a mechanical Shimano STIHydraulic brake lever with Servo Wave provides excellent stopping power with less effort especially from the hood positionHydraulic reservoir tank provides pad to rotor clearance auto-adjust maintaining braking performance during pad wearFinely tuneable reach adjusters for the levers enable custom fitment for all handsLevers use CR1632 batteries which last for approximately 1.5-2 years