The GR5 (GR501) Flat Pedal MTB Shoes from Shimano are tough, comfortable and offer incredible flat pedal grip without hampering control or locking you to the pedals. Shimano have you covered protection wise too with a tough upper that is also extremely breathable.Flat pedal shoe features grip, protection, comfort, and style for gravity ridersSticky-rubber outsole for superb grip on pedal or groundDurable synthetic upper with mesh for protection and breathabilityLace fastening for a secure fit, alternative colour lace to personalise your shoesComfortable padded ankle collar for extra comfort and protectionPlough down trails and sail over rough terrain with full confidence with the GR5 Flat Pedals from Shimano. The tough and robust synthetic upper offers great protection while the mesh inserts allow your feet to breath which helps to keep you comfortable and fully focused on the trail. The rubber sole offers high traction on and off the pedals however it s not going to stop you from re-positioning your feet on the pedals when you need to. A removable insole improves drying times for when your feet get wet, which let s face it is inevitable in the UK climate. Size Chart:
The Shimano Road Brake Cable Set is designed using stainless steel inner wires for increased service life. The stainless-steel inner wires provide smooth braking and higher corrosion resistance. The outer casing is lined with a polymer sheath to assist with the smooth operation of the inner wire.Includes:1.6 mm inner wires (1 x 1000 mm and 1 x2050 mm)5 mm outer casing for a complete bike (1 x 2200 mm)All end caps
The Shimano MTB Gear Cable Set gives you everything you need to replace old gear cables in one handy pack. Complete MTB gear cable set with all you need in one handy packFitting new gears or completely overhauling your gear cabling couldn't be easier - everything you need in one packIncludes 1.2 mm inner wires (1 x 2100 mm, 1 x 1800 mm) and black 4 mm SP41 outer casing for a complete bike (1 x 3000 mm), and sealed outer caps one with added tongue for rubber shield plus inner end capsStainless steel precision ground round inner wire leaves a smooth surface for low friction while providing high corrosion resistanceOuter casing is lubricated internally along its length with low-friction silicone grease to reduce cable frictionSpecial construction process makes for an axially stiff outer casing that transmits shifting movements accurately and quicklyOuter casing is lined with a polymer sheath to assist with the smooth operation of the inner wireThe outer casing is lubricated internally along its length with low-friction silicone grease to reduce cable friction and give you super smooth shifting. The stainless-steel precision ground round inner wire leaves a smooth surface for low friction while providing high corrosion resistance which means it will last longer. The special construction process makes for an axially stiff outer casing that transmits shifting movements accurately and quickly.
The MTB inspired GRX WH-RX570 gravel wheels by Shimano are specifically designed for unlimited gravel adventure riding.Intended use: Gravel, Road, CyclocrossMTB inspired, asymmetric tubeless ready rimsRim width/depth: 22.6 mm (inner) / 22 mmFront axle: 12 x 100 mm (E-THRU axle) / Rear axle: 12 x 142 mm (E-THRU axle)Recommended tyre width: 32 mm - 42 mm 700C, 38 mm - 53mm 650BCompatible with 7/8/9/10/11 speed Shimano HGWeight (approx.): 700c (1,720g) / 650b (1,657g)The GRX WH-RX570 wheels are built around an asymmetric tubeless ready rim with 24 robust, stainless steel spokes that connect the Centre Lock compatible hubs. The asymmetric rim profile of the GRX wheels increases durability and allows for even spoke tension, which results in improved riding stability and stiffness for a sprightly and agile performance. With an inner rim width of 21.6 mm, it goes perfectly together with large-volume gravel and off-road tyres.
The Shimano PD-GR500 is a great value flat pedal that is perfect for all-mountain and trail riding. With a low-profile concave platform to provide excellent control and efficiency, the PD-GR500 uses the classic MX80 shape and low-maintenance sealed cartridge bearings and chromoly axles to ensure these pedals are tough enough to withstand knocks and provide many years of faithful service.Great value platform pedalConcave platform for better control and efficiencyLong replaceable pins are screwed in from the back for easy maintenanceLow-maintenance sealed cartridge bearingChromoly axlesWeight - 533g (pair)
A tough genuine Shimano tool. The LR10 lockring remover for centre lock disc rotors and HG cassettes makes the removal of these items easy. The large internal diameter allow the tool to slide over all axle locknuts. This tool can be operated using a 3/4 drive torque wrench or ratchet driver.
Interchangeable, precision engineered Shimano disc brake caliper mount adapters. Designed to mount post type disc calipers to either international standard or post type disc brake mounts on most frames and forks. Available in front or rear versions to suit most rotor sizes & suitable for most brands of post type calipers.
Shimano's XT disc brakes have been renowned for their phenomenal performance for years and now the Deore XT M8100 Brakes take their show stopping performance to the next level.Oversized 2-piston caliper provides incredible stopping powerStiff and lightweight 2-piece caliper with opposed pistons in two diameters to reduce pad wear and increases controlErgonomic alloy brake lever with hinged clamp is easy to install and is extremely comfortableCompatible with I-Spec EV gear shifters for neat integration of handlebar controlsIncludes sintered brake pads, spare olives and inserts so you can cut hoses to correct length rear hose length: 1700mm, front hose length: 1000mmBrakes are set up UK-style with front brake on the right, rear on the leftThe Deore XT M8100's 2-piston caliper is what gives it it's brilliant stopping power and effortless control. The calipers 2-piece construction is also lightweight and incredibly stiff, so you can be sure that none of the power generated is going to waste; these are designed to slow you down in a hurry!Power is nothing without control and thankfully the alloy brake lever uses Shimano's tried and tested design that is incredibly comfortable thanks to its ergonomic design that is perfect for one-finger braking. Shimano's Servo Wave action further improves modulation and control. The hinged clamp also makes installation incredibly easy; no need to remove grips or other controls! The lever also features a tool-less reach adjuster, so you can be sure to find a setup that works for you, no matter how big or small your hands are. There's also a free stroke adjuster so you really can set your brakes just how you like them. The lever is compatible with Shimano's I-Spec EV gear shifters, so you can neatly integrate your brakes and gears into one unit for a clean, less cluttered look.Ease of use is what Shimano brakes are known for and the Deore XT M8100 is no different. Mineral oil is non-corrosive and less hazardous than DOT fluid found in other brakes and won't make a mess of your frame, while the shim-less mounting system makes it easy to get the brakes running perfectly with no brake rub. Coming disassembled but fully bled, all you need to do is remove the rubber bungs, connect the lever, caliper and hose (1000mm Front, 1700mm Rear) and you are ready to roll! Rotor and adaptors sold separately. The brakes also include spare olives and inserts should you need to cut down the stock hose length. Great value, reliable and powerful, if you want a powerful but lightweight brake for your cross country or trail bike, you should invest in a set of Shimano Deore XT M8100 brakes!
Fitting new brakes or giving your cabling a complete overhaul has never been easier than with the Shimano Road Brake Cable set. The die-extruded PTFE coated inner wire leaves a smooth surface for low friction in use, and stainless steel provides smooth shifting and higher corrosion resistance. Includes 1.6 mm PTFE inner wires (1 x 1000 mm and 1 x 2050 mm), and 5 mm outer casing for a complete bike (1 x 800 mm and 1 x 1400 mm), and all end caps. The outer casing is lined with a polymer sheath to assist with the smooth operation of the inner wire.
These great value 57mm drop Shimano brake calipers are designed for frames with larger clearances, allowing enough room for full length mudguards and making them perfect for winter and training bikes. The Super SLR dual pivot design allows for superior braking performance with the aluminium lever arms running on coated pivot washers for a smooth, friction free response. Setup is easy thanks to toe in adjustable brake shoes and the resin QR thumb lever allows for fast wheel removal.
The Shimano WH-MT601 wheels bring robust performance to any trail. The aluminium tubeless rims feature double butted, J-bend spokes that are laced to centre lock hubs and deliver fast acceleration for more fun on the trail.Front:MT601 tubeless ready 25 mm internal width disc wheel System brings high performance technology to an affordable price pointThe Hub uses angular contact bearings designed to cradle the balls giving both radial and lateral support for superior strength and durability in real world riding conditions. They also offer precision bearing adjustment and easy maintenanceEasy to use Centre Lock Disc Rotor mount for secure hassle-free setupDurable steel axles24 round butted stainless steel J-bend spokesContact seals with internal grease sleeve to keep the elements out and the grease inClincher tyre compatible rim for use with 2.0 - 2.4 inch tyresInternal rim width 24CAxle not includedRear:MT601 tubeless ready 25 mm internal width disc wheel System brings high performance technology to an affordable price pointThe Hub uses angular contact bearings designed to cradle the balls giving both radial and lateral support for superior strength and durability in real world riding conditions. They also offer precision bearing adjustment and easy maintenanceSuper quick engaging 36 point in 360deg MICRO SPLINE 12-speed Freehub body giving near instant power transferEasy to use centre Lock Disc Rotor mount for secure hassle-free setupDurable steel axles24 round butted stainless steel J-bend spokesContact seals with internal grease sleeve to keep the elements out and the grease inClincher tyre compatible rim for use with 2.0 - 2.4-inch tyresInternal rim width 24CFor use with Micro Spline 12-speed cassettes onlyAxle not included
A tough genuine Shimano tool. The FC33 HollowTech II crank tool is specifically designed for the correct installation and preloading of HollowTech II crank arms.