The Masterpiece is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market. Masterpiece posts weigh approximately 40g less than the same size Elite post. This weight reduction is accomplished while maintaining the strength and durability expected of a Thomson seatpost. Thomson accomplishes this weight reduction by machining the seatpost all over, including the oval inner diameter. It is able to hold closer tolerances by machining than by extrusion alone. Machining over an already beautiful design makes the Masterpiece Seatpost a work of art.Machined 7000 series Aluminium41mm seat rail grip lengthTilt adjustment from -5° to +29°Low profile clampsAvailable in 27.2mm, 30.9mm and 31.6mm diametersCertified to: EN 14766 2006 MTBThe tube and head of the Thomson Masterpiece seatpost is integral machined from one piece of high strength 7000 series aluminium. The head is not pressed or bonded in, allowing for superior strength and minimum weight. We have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inches shorter than our grip length.The Thomson Masterpiece seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts we tested failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson Masterpiece seatpost has a clamp, head, and upper tube strong enough to withstand 325 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 230 foot-lbs of torque. Under severe impact the Thomson Masterpiece seatpost will bend slightly but allow the rider to come to a stop or continue the ride.The Masterpiece seatpost has all parts captive and can easily be attached to a seat without dis-assembly. Very low profile clamps means no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards.
The Masterpiece is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market. Masterpiece posts weigh approximately 40g less than the same size Elite post. This weight reduction is accomplished while maintaining the strength and durability expected of a Thomson seatpost. Thomson accomplishes this weight reduction by machining the seatpost all over, including the oval inner diameter. It is able to hold closer tolerances by machining than by extrusion alone. Machining over an already beautiful design makes the Masterpiece Seatpost a work of art.Machined 7000 series Aluminium41mm seat rail grip lengthTilt adjustment from -5° to +29°Low profile clampsAvailable in 27.2mm, 30.9mm and 31.6mm diametersCertified to: EN 14766 2006 MTBThe tube and head of the Thomson Masterpiece seatpost is integral machined from one piece of high strength 7000 series aluminium. The head is not pressed or bonded in, allowing for superior strength and minimum weight.We have a long 1.614 inch (41 mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inches shorter than our grip length. The Thomson Masterpiece seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts we tested failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson Masterpiece seatpost has a clamp, head and upper tube strong enough to withstand 325 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 230 foot-lbs of torque. Under severe impact the Thomson Masterpiece seatpost will bend slightly but allow the rider to come to a stop or continue the ride. The Masterpiece seatpost has all parts captive and can easily be attached to a seat without dis-assembly.Very low profile clamps mean no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards.
The Masterpiece is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market. Masterpiece posts weigh approximately 40g less than the same size Elite post. This weight reduction is accomplished while maintaining the strength and durability expected of a Thomson seatpost. Thomson accomplishes this weight reduction by machining the seatpost all over, including the oval inner diameter. It is able to hold closer tolerances by machining than by extrusion alone. Machining over an already beautiful design makes the Masterpiece Seatpost a work of art.Machined 7000 series Aluminium41mm seat rail grip lengthTilt adjustment from -5° to +29°Low profile clampsAvailable in 27.2mm, 30.9mm and 31.6mm diametersCertified to: EN 14766 2006 MTBThe tube and head of the Thomson Masterpiece seatpost is integral machined from one piece of high strength 7000 series aluminium. The head is not pressed or bonded in, allowing for superior strength and minimum weight. We have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inches shorter than our grip length.The Thomson Masterpiece seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts we tested failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson Masterpiece seatpost has a clamp, head, and upper tube strong enough to withstand 325 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 230 foot-lbs of torque. Under severe impact the Thomson Masterpiece seatpost will bend slightly but allow the rider to come to a stop or continue the ride.The Masterpiece seatpost has all parts captive and can easily be attached to a seat without dis-assembly. Very low profile clamps means no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards.
The Masterpiece is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market. Masterpiece posts weigh approximately 40g less than the same size Elite post. This weight reduction is accomplished while maintaining the strength and durability expected of a Thomson seatpost. Thomson accomplishes this weight reduction by machining the seatpost all over, including the oval inner diameter. It is able to hold closer tolerances by machining than by extrusion alone. Machining over an already beautiful design makes the Masterpiece Seatpost a work of art.Machined 7000 series Aluminium41mm seat rail grip lengthTilt adjustment from -5° to +29°Low profile clampsAvailable in 27.2mm, 30.9mm and 31.6mm diametersCertified to: EN 14766 2006 MTBThe tube and head of the Thomson Masterpiece seatpost is integral machined from one piece of high strength 7000 series aluminium. The head is not pressed or bonded in, allowing for superior strength and minimum weight.We have a long 1.614 inch (41 mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inches shorter than our grip length. The Thomson Masterpiece seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts we tested failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson Masterpiece seatpost has a clamp, head and upper tube strong enough to withstand 325 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 230 foot-lbs of torque. Under severe impact the Thomson Masterpiece seatpost will bend slightly but allow the rider to come to a stop or continue the ride. The Masterpiece seatpost has all parts captive and can easily be attached to a seat without dis-assembly.Very low profile clamps mean no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards.
The Masterpiece is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market. Masterpiece posts weigh approximately 40g less than the same size Elite post. This weight reduction is accomplished while maintaining the strength and durability expected of a Thomson seatpost. Thomson accomplishes this weight reduction by machining the seatpost all over, including the oval inner diameter. It is able to hold closer tolerances by machining than by extrusion alone. Machining over an already beautiful design makes the Masterpiece Seatpost a work of art.Machined 7000 series Aluminium41mm seat rail grip lengthTilt adjustment from -5° to +29°Low profile clampsAvailable in 27.2mm, 30.9mm and 31.6mm diametersCertified to: EN 14766 2006 MTBThe tube and head of the Thomson Masterpiece seatpost is integral machined from one piece of high strength 7000 series aluminium. The head is not pressed or bonded in, allowing for superior strength and minimum weight. We have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inches shorter than our grip length.The Thomson Masterpiece seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts we tested failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson Masterpiece seatpost has a clamp, head, and upper tube strong enough to withstand 325 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 230 foot-lbs of torque. Under severe impact the Thomson Masterpiece seatpost will bend slightly but allow the rider to come to a stop or continue the ride.The Masterpiece seatpost has all parts captive and can easily be attached to a seat without dis-assembly. Very low profile clamps means no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards.
The Masterpiece is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market. Masterpiece posts weigh approximately 40g less than the same size Elite post. This weight reduction is accomplished while maintaining the strength and durability expected of a Thomson seatpost. Thomson accomplishes this weight reduction by machining the seatpost all over, including the oval inner diameter. It is able to hold closer tolerances by machining than by extrusion alone. Machining over an already beautiful design makes the Masterpiece Seatpost a work of art.Machined 7000 series Aluminium41mm seat rail grip lengthTilt adjustment from -5° to +29°Low profile clampsAvailable in 27.2mm, 30.9mm and 31.6mm diametersCertified to: EN 14766 2006 MTBThe tube and head of the Thomson Masterpiece seatpost is integral machined from one piece of high strength 7000 series aluminium. The head is not pressed or bonded in, allowing for superior strength and minimum weight.We have a long 1.614 inch (41 mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inches shorter than our grip length. The Thomson Masterpiece seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts we tested failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson Masterpiece seatpost has a clamp, head and upper tube strong enough to withstand 325 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 230 foot-lbs of torque. Under severe impact the Thomson Masterpiece seatpost will bend slightly but allow the rider to come to a stop or continue the ride. The Masterpiece seatpost has all parts captive and can easily be attached to a seat without dis-assembly.Very low profile clamps mean no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards.
The Link range are the newest tag-alongs from WeeRide and have a new frame shape along more clearance for larger wheeled bikes or panniers.New patented Sync Link Pivot design ensures smooth movement and ride for childNew arm folds easily for compact storage / movementTrue quick release system for fast detachment of your bike trailer from the adult bikeAdjustable handlebars, up/down and rotation adjustments for maximum age rangeUniquely fits oversized seat posts, up to 40mm, and 700c wheelsHigher quality child bike seat than most othersBeautiful paint finishesSafety Flag included20 wheel sizeHolds up to a 35kg riderRecommended for ages 4 - 9, rider must have inside leg of at least 52cm to pedal at lowest, but can coast on pedals at 40cmChild can pedal forward, backwards or coastWhy buy a cycle tow bar like Trailgator and have all the connection problems and instability for your little one Tagalongs are the best child bike seat for children aged 4 to 9 who have outgrown their baby bike seat, but can't manage those longer bike rides, or maybe haven't mastered riding just yet. WeeRide s tagalongs have all the safety and convenience features of the top brands, but at a lower price. The most important part of a tag along is the pivot and WeeRide have the best system, with the Sync Link Pivot.
The Link range are the newest tag-alongs from WeeRide and have a new frame shape along more clearance for larger wheeled bikes or panniers.New patented Sync Link Pivot design ensures smooth movement and ride for childNew arm folds easily for compact storage / movementTrue quick release system for fast detachment of your bike trailer from the adult bikeAdjustable handlebars, up/down and rotation adjustments for maximum age rangeUniquely fits oversized seat posts, up to 40mm, and 700c wheelsHigher quality child bike seat than most othersBeautiful paint finishesSafety Flag included20 wheel sizeHolds up to a 35kg riderRecommended for ages 4 - 9, rider must have inside leg of at least 52cm to pedal at lowest, but can coast on pedals at 40cmChild can pedal forward, backwards or coastWhy buy a cycle tow bar like Trailgator and have all the connection problems and instability for your little one Tagalongs are the best child bike seat for children aged 4 to 9 who have outgrown their baby bike seat, but can't manage those longer bike rides, or maybe haven't mastered riding just yet. WeeRide s tagalongs have all the safety and convenience features of the top brands, but at a lower price. The most important part of a tag along is the pivot and WeeRide have the best system, with the Sync Link Pivot.
The Link range are the newest tag-alongs from WeeRide and have a new frame shape along more clearance for larger wheeled bikes or panniers.New patented Sync Link Pivot design ensures smooth movement and ride for childNew arm folds easily for compact storage / movementTrue quick release system for fast detachment of your bike trailer from the adult bikeAdjustable handlebars, up/down and rotation adjustments for maximum age rangeUniquely fits oversized seat posts, up to 40mm, and 700c wheelsHigher quality child bike seat than most othersBeautiful paint finishesSafety Flag included20 wheel sizeHolds up to a 35kg riderRecommended for ages 4 - 9, rider must have inside leg of at least 52cm to pedal at lowest, but can coast on pedals at 40cmChild can pedal forward, backwards or coastWhy buy a cycle tow bar like Trailgator and have all the connection problems and instability for your little one Tagalongs are the best child bike seat for children aged 4 to 9 who have outgrown their baby bike seat, but can't manage those longer bike rides, or maybe haven't mastered riding just yet. WeeRide s tagalongs have all the safety and convenience features of the top brands, but at a lower price. The most important part of a tag along is the pivot and WeeRide have the best system, with the Sync Link Pivot.
FeaturesThe quickest and most convenient cycle roof carrier on the market,Revised clamp with extended lower jaw holds your bike in place whilst you secure the wheel straps and tighten everything up,Integrated torque limited dial prevents over tightening on lightweight carbon frames whilst ensuring that clamp is still secure,Deep and flexible padding integrated into the 598's jaws adapts to the shape of your frame giving a more secure hold whilst minimising the chances of damage,Smartly designed wheel holders with diagonal straps for a larger contact area and more secure hold. Ratcheting pump-buckles make cinching them up a quick and easy task,Clamp arm can be switched tool-free from one side to the other for mounting on either side of your vehicle,Clamp and mountings are lockable, securing the rack to the car and the bike to the rack,Includes T-track adaptors to fit Thule Wing, Slide, and Aero bars, requires adaptor for square bars,Maximum suggested bike weight: 20 KG,City crash tested and TÃV-GS approved,All Thule automotive products come with a 5 year warranty.
The Pro Pilot is WeeRide s deluxe tagalong with a lightweight aluminium frame and beautiful blue finish. WeeRide make the best tagalong bike trailers because they have every feature you would like, plus their own patented pivot system to ensure best ride for the child. WeeRide tagalong bike trailers for kids are the best design available.New patented Sync Link Pivot design ensures smooth movement and ride for childSuperior design Front Splash GuardNew arm folds easily for compact storage / movementTrue quick release system for fast detachment from adult bikeAdjustable handlebars, up/down and rotation adjustments for maximum age rangeUniquely fits oversized seat posts, up to 40mmHigher quality seat than most othersSafety Flag included and chain guard for child's safety20 wheel sizeHolds up to a 35kg riderRecommended for ages 4 - 9, rider must have inside leg of at least 52cm to pedal at lowestChild can pedal forward, backwards or coast on the trail bikeAluminium no rust frameIncludes two mudguards and chain guardWhy buy a cycle tow bar like Trailgator and have all the connection problems and instability for your little one Tagalongs are the best child bike seat for children aged 4 to 9 who have outgrown their baby bike seat, but can't manage those longer bike rides, or maybe haven't mastered riding just yet. WeeRide s tagalongs have all the safety and convenience features of the top brands, but at a lower price. The most important part of a tag along is the pivot and WeeRide have the best system, with the Sync Link Pivot.
How could Hope possibly follow on from the legendary Pro 2 It was always going to be a tough act to follow. But with the Pro 4, Hope have seemingly done the impossible. With a ground up redesign, the Pro 4 hub takes everything that made the Pro 2 great and brings it bang up to date. With larger diameter flanges to increase stiffness on modern 27.5 and 29 inch wheels with no weight increase, the Pro 4 uses Hope s bullet proof sealed stainless steel cartridge bearings that make for one extremely reliable centrepiece to your wheelset. The BOOST specific version moves the flanges 3mm further outboard to make an already stiff setup even stiffer, great news for hard-charging riders. The Pro 4 rear hub features a brand new 4 Pawl Ratchet Freehub with 44 tooth engagement to offer a super quick 8.2 degrees engagement, transferring every ounce of power you can muster in a ruthless manner. In true Hope style they sound the business as well! Add in 6 different splashes of Hope s signature anodising and you ve got a worthy successor on your hands. Machined From 2014 T6 AluminiumSealed Stainless Steel Cartridge Bearings4 Pawl Ratchet With 44 Tooth Engagement (8.2 Degrees)Designed Specifically To Suit Frames with BOOST 148x12 Rear Axle SpacingIS 6 Bolt disc mountLarger Diameter Spoke Flanges Make For Stiffer Wheels Flanges Are Moved 3mm Outboard For Even Greater Wheel StiffnessWeight From 311g All Hubs Hand Built In Barnoldswick