The Masterpiece is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market. Masterpiece posts weigh approximately 40g less than the same size Elite post. This weight reduction is accomplished while maintaining the strength and durability expected of a Thomson seatpost. Thomson accomplishes this weight reduction by machining the seatpost all over, including the oval inner diameter. It is able to hold closer tolerances by machining than by extrusion alone. Machining over an already beautiful design makes the Masterpiece Seatpost a work of art.Machined 7000 series Aluminium41mm seat rail grip lengthTilt adjustment from -5° to +29°Low profile clampsAvailable in 27.2mm, 30.9mm and 31.6mm diametersCertified to: EN 14766 2006 MTBThe tube and head of the Thomson Masterpiece seatpost is integral machined from one piece of high strength 7000 series aluminium. The head is not pressed or bonded in, allowing for superior strength and minimum weight.We have a long 1.614 inch (41 mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inches shorter than our grip length. The Thomson Masterpiece seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts we tested failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson Masterpiece seatpost has a clamp, head and upper tube strong enough to withstand 325 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 230 foot-lbs of torque. Under severe impact the Thomson Masterpiece seatpost will bend slightly but allow the rider to come to a stop or continue the ride. The Masterpiece seatpost has all parts captive and can easily be attached to a seat without dis-assembly.Very low profile clamps mean no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards.
The Masterpiece is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market. Masterpiece posts weigh approximately 40g less than the same size Elite post. This weight reduction is accomplished while maintaining the strength and durability expected of a Thomson seatpost. Thomson accomplishes this weight reduction by machining the seatpost all over, including the oval inner diameter. It is able to hold closer tolerances by machining than by extrusion alone. Machining over an already beautiful design makes the Masterpiece Seatpost a work of art.Machined 7000 series Aluminium41mm seat rail grip lengthTilt adjustment from -5° to +29°Low profile clampsAvailable in 27.2mm, 30.9mm and 31.6mm diametersCertified to: EN 14766 2006 MTBThe tube and head of the Thomson Masterpiece seatpost is integral machined from one piece of high strength 7000 series aluminium. The head is not pressed or bonded in, allowing for superior strength and minimum weight. We have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inches shorter than our grip length.The Thomson Masterpiece seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts we tested failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson Masterpiece seatpost has a clamp, head, and upper tube strong enough to withstand 325 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 230 foot-lbs of torque. Under severe impact the Thomson Masterpiece seatpost will bend slightly but allow the rider to come to a stop or continue the ride.The Masterpiece seatpost has all parts captive and can easily be attached to a seat without dis-assembly. Very low profile clamps means no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards.
A pair of genuine Avid Elixir Disc Brake Pads. These pads offer great braking performance and work well in all conditions. Available with organic or standard compounds.
A pair of genuine Avid Juicy/BB7 Disc Brake Pads. These pads offer great braking performance and work well in all conditions. Available with organic or standard compounds.
Customise your bike with the Race Face Aluminium Headset Spacer Kit containing a top cap and 4 spacers with the Race Face logo etched on them. Includes: 1 x top cap & 4 x 1"1/8 headset spacers (2.5mm, 5mm, 10mm & 15mm)
Mudguards don't have to be fragile and ugly, as proved the stylish and supremely durable SKS Edge Aluminium Mudguards! With a modern look teamed with a solid construction that is easy to fit, the Edge Aluminium Mudguards are ideal for commuter or adventure bikes.Stylish aluminium mudguards with subtle matt black finishExtremely durable construction and easy to use 3 point fixing systemSuitable for 27.5" & 700c wheelsTwo widths available; 46mm & 56mmGuards are 46mm or 56mm wide and weigh 543g/568g including fittingsThere's no doubt mudguards are godsend when conditions are wet but many are not the most visually appealing shall we say. The SKS Edge Aluminium Mudguards look great thanks to their sleek and stylish aluminium design, keeping the smooth lines of your bike largely intact. Not only are they stylish, the aluminium construction and 3 point fixing system means they are supremely durable and easy to fit too. Compatible with 27.5" & 700c wheels, the SKS Edge Aluminium Mudguards are the perfect choice for riders who want a set of stylish and durable mudguards for their commuter or adventure bike.Specifications:46mm:Material: AluminiumWeight: 543gWheel size: 27,5"(650b)" & 700cTyre width in inches: 28-40 mmLength front fender: 740mmLength rear fender: 1200mm56mm:Material: AluminiumWeight: 568gWheel size: 27,5" (650b)" & 700cTyre width in inches: 38-50mmLength front fender: 740mmLength rear fender: 1200mm
Mudguards don't have to be fragile and ugly, as proved the stylish and supremely durable SKS Edge Aluminium Mudguards! With a modern look teamed with a solid construction that is easy to fit, the Edge Aluminium Mudguards are ideal for commuter or adventure bikes.Stylish aluminium mudguards with subtle matt black finishExtremely durable construction and easy to use 3 point fixing systemSuitable for 27.5" & 700c wheelsTwo widths available; 46mm & 56mmGuards are 46mm or 56mm wide and weigh 543g/568g including fittingsThere's no doubt mudguards are godsend when conditions are wet but many are not the most visually appealing shall we say. The SKS Edge Aluminium Mudguards look great thanks to their sleek and stylish aluminium design, keeping the smooth lines of your bike largely intact. Not only are they stylish, the aluminium construction and 3 point fixing system means they are supremely durable and easy to fit too. Compatible with 27.5" & 700c wheels, the SKS Edge Aluminium Mudguards are the perfect choice for riders who want a set of stylish and durable mudguards for their commuter or adventure bike.Specifications:46mm:Material: AluminiumWeight: 543gWheel size: 27,5"(650b)" & 700cTyre width in inches: 28-40 mmLength front fender: 740mmLength rear fender: 1200mm56mm:Material: AluminiumWeight: 568gWheel size: 27,5" (650b)" & 700cTyre width in inches: 38-50mmLength front fender: 740mmLength rear fender: 1200mm
The Lezyne Aluminum Bar Mount is a CNC-machined aluminum hard mount with a reinforced Composite Matrix cradle that securely holds the Mega Drive, Deca Drive, and XL LED lights. It is designed for 31.8 mm bars, with the cradle designed to pivot 15 degrees of lateral adjustment to direct light where it is most needed. The hinged clamshell design provides a great grip that is ideal for large lights. A large thumb screw secures the AL mount to the bar without need of tools, and can be tightened by hand or a 1 mm hex key. Molded rubber shims add grip and fine tune fitting to undersized bars. Aluminum Bar Mounts are sold separately and are not included with the Mega Drive, Deca Drive, or XL LED lights kit.CNC machined aluminium constructionFor use with 31.8mm handlebars
Constructed entirely of extruded aluminium. CNC machined and heat treated for a strong, lightweight design. Sturdy ribs and top catch secures a wide range of bottle types and sizes. Simple design provides easy bottle retrieval and docking.Extruded aluminiumCNC machined Heat treatedLightweight designSturdy ribsNeo Metallic colour
The Apex stem is designed for use across all varieties of riding, from XC through to all mountain and Gravity Enduro racing, the Apex stem can cut the mustard in all disciplines. The stem is lightweight and features Renthal's new 7075 series aluminium twin clamps which wrap around the bar by an impressive 240 degrees and provides a super firm grip which will never let your bar slip. The stem has been designed to be compatible with the new wide bar generation and will compliment you Carbon Renthal handlebars perfectly. No matter what your bike or your riding style, the Apex will match your style with ease.Bar Clamp: 31.8 OversizedRise: + / - 6 Degrees (Can Be Flipped)Stack Height: 40mmClamp Width: 46mm
The SRAM Level Ultimate / TLM and Road Hydro Disc Brake Pads have been designed for use with non-eTap AXS SRAM road hydraulic disc brakes (HRD), as well as the Level Ultimate and Level TLM mountain bike brakes. Compatibility: Level Ultimate, Level TLM and most SRAM road hydro disc brakes - will not fit Gen2 Red eTap AXS, Force eTap AXS or Rival eTao AXS calipersPad spreader not included - image for illustration purposes only
Four bolt SRAM X-Sync 2 12-Speed Aluminium Chainring with a 104 BCD, essential for keeping your drivetrain running smoothly and ensuring chain retention.For 12-Speed SRAM drivetrains34T104 BCDAluminium construction