Castelli's best jacket for mild conditions, with front wind protection, light insulation, maximum breathability, and water repellency to keep you dry in mist, light rain or spray from wet roads. This is a Castelli staff favorite thanks to the wide temperature range, fit and versatility. GORE-TEX INFINIUM™ WINDSTOPPER® 150 fabric on front and sleeves for wind protection with high breathability and effective rain protection Nano Flex Xtra Dry on back for more ventilation allows heat and sweat to escape while shedding rain thanks to a nanotechnology water-repellent finish Alpha double-layer construction separates windproof layer from insulation layer, allowing better ventilation management Inner layer in ProSecco Strada for lightweight insulation with effective moisture management Double YKK® Vislon® front zippers Zippered secure side pocket for valuables 3 rear pockets with reflective laser-cut drain holes Raw-edge waist lies flat and moves with you. This jacket is about the art of dressing just right for cool conditions. We're talking about those days when you need some protection from the cool air but not enough to bring out the winter jacket. Overdress and you'll be sweating and get cold because you're wet. Underdress and you never fully warm up to enjoy the ride. The concepts behind the construction are fairly simple: wind protection on front-facing surfaces, highly breathable fabrics on back-facing surfaces, and all-around water repellency in case you get a few drops of rain. But what makes this jacket spectacular is how we executed these simple concepts. The wind protection comes from our GORE-TEX INFINIUM™ WINDSTOPPER® lightweight two-way-stretch fabric that moves with you while being so light you'll hardly notice it's there.This light wind layer is backed by a separate ProSecco Strada inner layer with a separate zip that can be opened independently for perfect ventilation control. The back is made from our Nano Flex Xtra Dry fabric that provides a good level of insulation yet has no membrane so allows for ample amounts of sweat to escape. The fit is close to body so there is no fabric flapping around, while the little details make the difference: easy-sliding YKK® zippers, reflective drain holes on the pockets, a lie-flat silicone gripper band around the waist. All these features are why this jacket is consistently named a favorite among Castelli staffers. We think it will be one of your favorites too.
Castelli's best jacket for mild conditions, with front wind protection, light insulation, maximum breathability, and water repellency to keep you dry in mist, light rain or spray from wet roads. This is a Castelli staff favorite thanks to the wide temperature range, fit and versatility. GORE-TEX INFINIUM™ WINDSTOPPER® 150 fabric on front and sleeves for wind protection with high breathability and effective rain protection Nano Flex Xtra Dry on back for more ventilation allows heat and sweat to escape while shedding rain thanks to a nanotechnology water-repellent finish Alpha double-layer construction separates windproof layer from insulation layer, allowing better ventilation management Inner layer in ProSecco Strada for lightweight insulation with effective moisture management Double YKK® Vislon® front zippers Zippered secure side pocket for valuables 3 rear pockets with reflective laser-cut drain holes Raw-edge waist lies flat and moves with you. This jacket is about the art of dressing just right for cool conditions. We're talking about those days when you need some protection from the cool air but not enough to bring out the winter jacket. Overdress and you'll be sweating and get cold because you're wet. Underdress and you never fully warm up to enjoy the ride. The concepts behind the construction are fairly simple: wind protection on front-facing surfaces, highly breathable fabrics on back-facing surfaces, and all-around water repellency in case you get a few drops of rain. But what makes this jacket spectacular is how we executed these simple concepts. The wind protection comes from our GORE-TEX INFINIUM™ WINDSTOPPER® lightweight two-way-stretch fabric that moves with you while being so light you'll hardly notice it's there.This light wind layer is backed by a separate ProSecco Strada inner layer with a separate zip that can be opened independently for perfect ventilation control. The back is made from our Nano Flex Xtra Dry fabric that provides a good level of insulation yet has no membrane so allows for ample amounts of sweat to escape. The fit is close to body so there is no fabric flapping around, while the little details make the difference: easy-sliding YKK® zippers, reflective drain holes on the pockets, a lie-flat silicone gripper band around the waist. All these features are why this jacket is consistently named a favorite among Castelli staffers. We think it will be one of your favorites too.
Castelli's best jacket for mild conditions, with front wind protection, light insulation, maximum breathability, and water repellency to keep you dry in mist, light rain or spray from wet roads. This is a Castelli staff favorite thanks to the wide temperature range, fit and versatility. GORE-TEX INFINIUM™ WINDSTOPPER® 150 fabric on front and sleeves for wind protection with high breathability and effective rain protection Nano Flex Xtra Dry on back for more ventilation allows heat and sweat to escape while shedding rain thanks to a nanotechnology water-repellent finish Alpha double-layer construction separates windproof layer from insulation layer, allowing better ventilation management Inner layer in ProSecco Strada for lightweight insulation with effective moisture management Double YKK® Vislon® front zippers Zippered secure side pocket for valuables 3 rear pockets with reflective laser-cut drain holes Raw-edge waist lies flat and moves with you. This jacket is about the art of dressing just right for cool conditions. We're talking about those days when you need some protection from the cool air but not enough to bring out the winter jacket. Overdress and you'll be sweating and get cold because you're wet. Underdress and you never fully warm up to enjoy the ride. The concepts behind the construction are fairly simple: wind protection on front-facing surfaces, highly breathable fabrics on back-facing surfaces, and all-around water repellency in case you get a few drops of rain. But what makes this jacket spectacular is how we executed these simple concepts. The wind protection comes from our GORE-TEX INFINIUM™ WINDSTOPPER® lightweight two-way-stretch fabric that moves with you while being so light you'll hardly notice it's there.This light wind layer is backed by a separate ProSecco Strada inner layer with a separate zip that can be opened independently for perfect ventilation control. The back is made from our Nano Flex Xtra Dry fabric that provides a good level of insulation yet has no membrane so allows for ample amounts of sweat to escape. The fit is close to body so there is no fabric flapping around, while the little details make the difference: easy-sliding YKK® zippers, reflective drain holes on the pockets, a lie-flat silicone gripper band around the waist. All these features are why this jacket is consistently named a favorite among Castelli staffers. We think it will be one of your favorites too.
With its Polartec® Alpha insulation, created for the demands of high-intensity exercise, the Defend Fire Alpha Jacket is all about keeping your temperature regulated. Despite its low bulk and low weight, it does a brilliant job of holding onto body heat. However, it’s also superb at preventing overheating and sweat build-up, allowing excess heat to escape as your effort levels rise and fall with the terrain. The result is greater comfort on the bike. The Defend Fire is also made to be tough. The outer is made from a durable stretch Cordura® material, more than a match for the demands of mountain biking. The stretch fit and MTB-specific cut also ensure you’re never held back from throwing your bike around the trails. And then there’s the DWR (Durable Water Repellent) treatment, shrugging off mud and water kicked up off damp trails.
Fox Racing Defend Fire Alpha JacketWith Polartec® Alpha insulation in key areas, the Fox Racing Defend Fire Alpha Jacket brings superb warmth to a cold day of mountain biking. The Defend Fire Alpha Jacket has been created for mountain bikers who'll be riding year-round, even in colder conditions. Strategically placed Polartec® Alpha insulation does a brilliant job of both keeping you warm and at the same time regulating moisture build-up too. When you're not working too hard it provides lightweight, low-bulk insulation against the cold. But as your effort levels increase it also allows excess heat and moisture vapour to escape, preventing you from being saturated in sweat. The result is comfort on both the tough uphills and on the thrilling downhills too. While an excellent temperature regulator, the Defend Fire is also made to be tough and durable too. Stretch Cordura® to the outside provides an abrasion-resistant finish, fending off the inevitable scratches and scapes from trail riding. The stretch fit and MTB-specific cut also ensure you’re never held back from throwing your bike around the trails. And then there’s the DWR (Durable Water Repellent) treatment, shrugging off mud and water kicked up off damp trails.Features:Materials: 74% Polyamide, 18% Polyester, 8% ElastaneStrategically placed Polartec® Alpha lining keeps you insulated, without overheatingStretch Cordura® material for increased abrasion resistance and maximum mobilityDurable Water Repellent treatment repels weather, dirt and debrisBonded cuff closures with lycra gussets to keep the cold outRear zippered pocket for additional storageBuy Fox Racing Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Racing Defend Fire Alpha JacketWith Polartec® Alpha insulation in key areas, the Fox Racing Defend Fire Alpha Jacket brings superb warmth to a cold day of mountain biking. The Defend Fire Alpha Jacket has been created for mountain bikers who'll be riding year-round, even in colder conditions. Strategically placed Polartec® Alpha insulation does a brilliant job of both keeping you warm and at the same time regulating moisture build-up too. When you're not working too hard it provides lightweight, low-bulk insulation against the cold. But as your effort levels increase it also allows excess heat and moisture vapour to escape, preventing you from being saturated in sweat. The result is comfort on both the tough uphills and on the thrilling downhills too. While an excellent temperature regulator, the Defend Fire is also made to be tough and durable too. Stretch Cordura® to the outside provides an abrasion-resistant finish, fending off the inevitable scratches and scapes from trail riding. The stretch fit and MTB-specific cut also ensure you’re never held back from throwing your bike around the trails. And then there’s the DWR (Durable Water Repellent) treatment, shrugging off mud and water kicked up off damp trails.Features:Materials: 74% Polyamide, 18% Polyester, 8% ElastaneStrategically placed Polartec® Alpha lining keeps you insulated, without overheatingStretch Cordura® material for increased abrasion resistance and maximum mobilityDurable Water Repellent treatment repels weather, dirt and debrisBonded cuff closures with lycra gussets to keep the cold outRear zippered pocket for additional storageBuy Fox Racing Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Racing Defend Fire Alpha JacketWith Polartec® Alpha insulation in key areas, the Fox Racing Defend Fire Alpha Jacket brings superb warmth to a cold day of mountain biking. The Defend Fire Alpha Jacket has been created for mountain bikers who'll be riding year-round, even in colder conditions. Strategically placed Polartec® Alpha insulation does a brilliant job of both keeping you warm and at the same time regulating moisture build-up too. When you're not working too hard it provides lightweight, low-bulk insulation against the cold. But as your effort levels increase it also allows excess heat and moisture vapour to escape, preventing you from being saturated in sweat. The result is comfort on both the tough uphills and on the thrilling downhills too. While an excellent temperature regulator, the Defend Fire is also made to be tough and durable too. Stretch Cordura® to the outside provides an abrasion-resistant finish, fending off the inevitable scratches and scapes from trail riding. The stretch fit and MTB-specific cut also ensure you’re never held back from throwing your bike around the trails. And then there’s the DWR (Durable Water Repellent) treatment, shrugging off mud and water kicked up off damp trails.Features:Materials: 74% Polyamide, 18% Polyester, 8% ElastaneStrategically placed Polartec® Alpha lining keeps you insulated, without overheatingStretch Cordura® material for increased abrasion resistance and maximum mobilityDurable Water Repellent treatment repels weather, dirt and debrisBonded cuff closures with lycra gussets to keep the cold outRear zippered pocket for additional storageBuy Fox Racing Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Navigating trails strewn with roots and rocks can get pretty tricky. A full-face helmet provides the optimum protection in this situation, with a robust chin strap that protects the head both from below and on the side lest the journey come to an abrupt end when the rider is pitched over the handlebars. Ideally that wouldn’t happen. If it doesn’t, the ROCA is simply just comfortable to wear thanks to the lightweight inmold construction and fixed visor that provides protection from the sun, mud and rocks. Two helmet sizes with two sets of pads each ensure that the ROCA will fit every rider. And the DD-Buckle chin fastener keeps the ROCA firmly on the head while shredding - and on hang outs. Combined with the new Scarabeo MTB, your head is protected all the way around. Key Features: Cam Ready - Extra space for camera mounting, Shield Protect - Shield provides protection against spray and the sun,. Technologies: Ceramic Shell - Durable outer shell thanks to the 3 shell construction, Hi-EPS - Optimum impact absorption thanks to Hi-EPS material made from microscopic little air chambers, Inmold - Low weight thanks to the inmold production where the upper shell is thermally connected with the Hi-EPS, Edge Protect - The lower edge of the helmet is protected by the polycarbonate shell Edge Protect, Airflow Venting - Strategically arranged ventilation openings guarantee ideal air flow in the interior.
Key Features: Removable Level 1 CE- certified back protector., CE certified Level 1 PU Foam and Viscoelastic blend shoulder protectors (1621_1:2012)., Multi-material streamlined design for superior body fit which enables top to worn under jersey., Evolved design incorporates back panel and elongated rear area for improved performance fit and coverage., Lightweight, stretchable mesh main construction with breathable padded inserts., Strategically placed panels to ensure the vest remains well fitted., Removable, slim-profiled, lightweight shoulder guards., Ergonomic back protector follows natural curve of the back., Back protector pocket can also house hydration pack., Front and back conduits for hydration pack hose., Rear kidney compartments for convenient access., Full length main front zipper for easy in and out., Soft chest and side padding is reinforced for added impact absorption and comfort., Short-sleeved styling allows for use with Alpinestars elbow protection., BNS compatible when using X or A-Straps., Smartphone compartment on lower back panel with padding and zipper for secure closure., Improved water bladder housing design includes hook-and-loop closure fixings and feeder openings..
With their insulated, breathable soft shell construction complete with windproof and water repelling treatment, the Nevada Thermal Pants 2 ensure optimum levels of all-weather performance, especially in cold and wet conditions. Constructed using a lightweight softshell fabric for comfort and durability, the Nevada Thermal Pants 2 feature a zippered hem on the bottom of the leg for quick and easy access to knee protectors.Construction• Warm microfleece inner soft shell fabric with windproof membrane and moisture repellent treatment is optimized for cold weather riding.• Reinforced poly-fabric panels on the bottom of the inner leg for enhanced durability.Key Features:• Large zippered side ventilation for effective heat and airflow control.• Internal elasticated back waist for on optimized fit.• Hook and loop strap waist adjustment and snap front closure for a secure, customized fit.• Flat-snap connection system allows the pants to be used with Alpinestars inner shorts.• Zippered bottom leg hem ensures quick and easy access to knee protectors (available separately).
The Alpha RoS 2 Light Jacket by Castelli is a lighter version of its ultimate winter jacket, ideal for milder conditions.The new and updated Alpha RoS 2 Light Jacket offers a versatility that disrupts conventional jacket and jersey categorisation. It offers the functionality and comfortable fit of a jersey with the protection of a jacket, shifting the focus of riding through bad weather off kit decisions and back onto your performance.The front and sleeves of the jacket are made from GORE-TEX INFINIUM™ WINDSTOPPER® fabric. The lightweight fabric has a unique membrane that delivers the triple crown of being completely windproof, highly breathable, and water repellent. Water resistance is improved further with minimal seaming and seam sealed shoulders, eliminating points where moisture can enter the jacket.For riding when the temperature is in the low teens or the efforts intensify, the back of the jacket is Castelli’s Nano Flex Xtra Dry fabric. This material sheds rain thanks to its water repellent finish but is highly breathable allowing sweat and moisture to escape.The Alpha Light jacket has an internal vest that hugs close to your body. The construction means you can regulate your temperature with ease by opening the external layer to allow airflow into the jacket and evacuate moisture without sacrificing insulation and exposing your body to wind chill. Key Features: GORE-TEX INFINIUM™ WINDSTOPPER® 150 fabric on front and sleeves for wind protection, breathability, and effective rain protection,Nano Flex Xtra Dry on back allows heat and sweat escape while shedding rain thanks to nanotechnology water-repellent finish,Alpha double-layer construction separates windproof layer from insulation, allowing controlled ventilation,Inner insulation layer in Prosecco Strada for lightweight insulation with effective moisture management,Double YKK® Vislon® front zippers,Front zippered pocket,3 rear pockets with reflective laser-cut drain holes,Raw-edge waist lies flat and moves with you,7° – 15°C / 45° – 59°F,Weight: 421g (Large).
The CE-certified Level 1 Paragon Lite Protection Jacket Long Sleeve boasts a lightweight, highly flexible design which provides impact and high abrasion protection within a breathable mesh sleeve for excellent levels of airflow and comfort.Key Features: Abrasion resistant fabric front panel., The triple segmented back shell plate is constructed from a high performance polymeric material blend for optimized flexibility and excellent weight saving properties., The back protector’s structure design changes from the centre towards the outside and provides the perfect balance between force dispersion and energy absorption., Unique back protector’s microstructure cell is designed for advanced energy absorption, adaptivity, maximum breathability and airflow., Ergonomic protection plate contours to the natural curve of the back ensuring optimum fit while riding., Horizontal flexion grooves for an adaptive fit in different riding positions., Soft, comfortable airmesh on the body side of the protector offers maximum breathability and rider comfort., PU foam chest pad provides additional coverage to the chest area., Back Protector - EN 1621-2:2014 Level 1., Elbow Protector – EN 1621-1:2012 Level 1., Shoulder Protectors - EN 1621-1:2012 Level 1., Extremely lightweight, durable and flexible protector constructed from breathable stretch mesh for a comfortable, close fit., The super lightweight back protector insert is developed in three waist-to-shoulder dimensions in order to cover all the body sizes., New design interlinked cell protectors are highly perforated and secured in a mesh pocket for excellent breathability and core cooling. .