From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at. Frame Construction: To optimise the weight, strength and stiffness, the Reactor Carbon frame features a full UD woven carbon fibre frameset (Including chain and seat stays). It is available for 27.5” or 29” wheel sizes. These are two totally different, compromise-free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size. Speed or play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”? Adjustable Geometry: All Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”. Trail – As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents. Rail - The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities. Suspension Design: To ensure the bike could climb as well as it descends, Nukeproof designed the 4 bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride. Full Specification List: • Frame: Nukeproof Reactor 290 Alloy, 130mm Travel, custom triple butted hydro-formed tube set for front triangle and chain stays, UD woven carbon fibre Seat stays, internal cable routing, internal cable routing, ISCG 05 mount, Enduro bearings, threaded 73mm BB, Boost 148mm rear axle spacing, 3D contoured rubber frame protection • Fork: Marzocchi Bomber Z2, 150mm, 44mm Offset, BOOST, RAIL Damper, Gloss Black • Shock: RockShox Super Deluxe Select R, Custom Tune, 210x50mm, Bearing End, 1x bottomless token fitted. • Front Wheel: Sun-Ringle Duroc 35 Comp 29", 15x110mm • Rear Wheel: Sun-Ringle Duroc 35 Comp 29", Shimano Microspline Driver, 148x12mm • Tyres: Front: Maxxis Assegai 29”x2.5 WT 3C MaxxTerra/EXO+/TR, Rear: Maxxis Dissector 29”x2.4 WT 3C MaxxTerra/EXO+/TR • Crankset: Race Face Ride, 12 Speed Crank, 170mm, 30T, 52mm Chainline • Shifter: Shimano Deore M6100-IR, 12-speed Rapidfire Plus, I-Spec EV • Rear Derailleur: Shimano Deore M6100, SGS 12-Speed, Shadow Plus • Chain: Shimano Deore M6100 12-Speed • Cassette: Shimano Deore M6100 12-Speed (HYPERGLIDE+), 10-51T • Brakes: Shimano Deore M6120 or SRAM DB8 hydraulic disc • Front Rotor: Shimano 203mm or SRAM, 200mm • Rear Rotor: Shimano 180mm or SRAM, 180mm • Handlebars: Nukeproof Neutron V2 25mm Rise, Width - M780mm, L800mm, XL800mm • Stem: Nukeproof Neutron AM, 45mm, black • Saddle: Nukeproof, Black • Seatpost: Brand-X Ascend internal, 31.6mm, M:150mm drop; L:170mm Drop; XL:200mm drop • Headset: Nukeproof, 44-56 IITS • Grips: Nukeproof Sam Hill Signature • Weight: 15kg Medium Tubeless Please Note: Due to severe delays in the bicycle supply chain, Nukeproof has been forced to make some alterations to the specification of the component parts supplied with this bicycle. As a result, the specification may differ from those shown in the images. Please refer to the specification table for accurate information. Key Specifications: Material: Hydroformed 6061 Triple-Butted Aluminium Fork Travel: 150mm Axle to Crown: 560mm Fork Offset: 44mm Rear Travel: 130mm Wheels Size: 29" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 210x50mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing: M/L/XL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS) Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 34.9mm BB: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: Sram Maxle Stealth M12x1.75 180mm (Thread Length 20mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab.
The Mega 290 Comp Alloy is equipped with 170mm RockShox Domain suspension forks and a Super Deluxe rear shock, giving you exceptional traction and terrain-smoothing suspension performance. A Shimano Deore 1x12-Speed gear transmission and powerful hydraulic disc brakes offer reliability, efficiency and power to ride trails anywhere on Earth. Shimano Deore 12-Speed Groupset and Hydraulic Disc Brakes This fun and versatile full-suspension enduro bike is equipped with a Shimano Deore 1x12-Speed groupset, giving you a wide gear range for climbing steep hills while powerful hydraulic disc brakes help control your momentum when descending. It also rolls upon stable and dependable Sun-Ringle Duroc SD37 wheels wrapped in fast-rolling, Tubeless Ready Wide Trail Maxxis Assegai and Minion DHR tyres. And it is fitted with a Brand X Ascend internally routed dropper seatpost. The MegaV4: Born Through Evolution, Not Revolution. For over 10 years, Nukeproof's best-selling model, the Mega has been racking up awards on Enduro stages and in the press around the world. With 4 Enduro World Series titles to its name, the Mega has become an icon that is synonymous with racing. However, they never rest on their laurels with the introduction of the 4th generation Mega - Now available in an all-new mixed wheel size platform. World Class Enduro Race Bike Since 2009 the Nukeproof Mega has been the constant path of development to meet the evolving demands of our riders and customers alike. The Nukeproof team are relentlessly striving for improvements and with each generation, the Mega has been chiselled and shaped into today’s thoroughbred Enduro race bike. With the launch of the Mega 290 Comp, you could forgive their designers for resting on their laurels. However, as Nukeproof products are developed between the tapes, there is a constant desire to hone and refine to give Nukeproof’s athletes and riders the best possible chance of standing on top of the podium. The Mega V4 is now available for 27.5”, 29” or new Mixed (Front 29”/Rear 27.5” wheel sizes) wheel setups, with each frame design tailored around each wheel size. The new mixed platform uses a 29” wheel up front to maximise grip and rolling efficiency whilst the 27.5” wheel out back, ensures nimble handling for manoeuvrability. Designed as an evolution of the ultimate Enduro bike, the Mega V4 has been fully reimagined to offer optimised sizing/fit, improved Geometry and suspension kinematics on a brand-new custom triple-butted hydro-formed alloy frame. Most importantly you can now fit a water bottle inside the main front triangle. Long-Travel Full Suspension Alloy Frame The Alloy Mega features a full custom triple-butted hydro-formed 6061-T6 Aluminium tube set and forged parts. It is available for 27.5”, 297 or 29” wheel sizes. These are totally different, compromise-free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size so that you can get the most out of every ride. Updated Sizing and Geometry Whilst humans may not have changed size much in recent years; the bikes they choose to ride most certainly have. To ensure a perfectly dialled fit Nukeproof now offer 297 bikes in S, M, or L sizes and 290 bikes in M, L, XL or XXL. Lower, longer, steeper and slacker. The Mega geometry is designed around the saddle offset for each size to optimise seated weight distribution. This results in steeper seat angles across the board but especially on larger sizes for taller riders. This in turn results in longer reach figures to ensure a comfortable cockpit on each size. To further aid the perfect fit Nukeproof have also used shorter seat tubes which are designed to maximise seat post insertion depths. Finally, all Mega bikes are now designed to use short offset forks to further improve both climbing and descending capabilities. Progressive and Supportive Suspension Platform To step-change the Mega’s suspension design Nukeproof went back to the drawing board and started afresh. They have redesigned the Mega 4 bar horst linkage to be super supple over small bumps, progressive and supportive throughout the mid-stroke for support when pedalling, cornering and pumping, with increased end stroke leverage to allow more tuning options with volume spacers. The kinematic is designed to have higher levels of anti-squat for climbing gears but this reduces as you drop down the cassette. The result is a bike that is more confidence-inspiring everywhere on the hill. It behaves itself on the climbs yet can still be thrashed through the roughest and most technical terrain on the way back down. Features: Frame: Nukeproof Mega V4 290 Alloy, 160mm Travel, custom triple butted hydro-formed tube set, internal cable routing, ISCG 05 mount, Enduro Bearings, Threaded 73mm BB, Boost 148mm rear axle spacing, 3D contoured Rubber frame protection Fork: RockShox Domain, Motion Control RC damper, 170mm, 44mm Offset, BOOST, Debonair, Gloss Black Shock: RockShox Super Deluxe Select R, Custom LIN L1 HOTDOG tune, 230x62.5mm, Bearing End, 2 bottomless tokens fitted Front Wheel: Sun-Ringle Duroc SD37 Comp 29", 15x110mm Rear Wheel: Sun-Ringle Duroc SD37 Comp 29", Shimano Microspline Driver, 148x12mm Tyres: Front: Maxxis Assegai 29" x 2.5 WT, 3C MaxxGrip DD TR, Rear: Maxxis Minion DHR II 29" x 2.4 WT, 3C MaxxTerra DD TR Crankset: Race Face Ride, 12 Speed Crank, 170mm, 30T, 52mm Chainline Shifter: Shimano Deore M6100-IR, 12-speed Rapidfire Plus, I-Spec EV Rear Derailleur: Shimano Deore M6100, SGS 12-Speed, Shadow Plus Chain: Shimano Deore M6100 12-Speed Cassette: Shimano Deore M6100 12-Speed (HYPERGLIDE+), 10-51T Chain Guide: MRP 1x CS, 28-34T, ISCG-05, black Brakes: Shimano or SRAM DB8 hydraulic disc Front Rotor: Shimano or SRAM, 200mm Rear Rotor: Shimano or SRAM, 200mm Handlebars: Nukeproof Neutron V2 25mm Rise, Width - M780mm, L800mm, XL800mm, XXL800mm Stem: Nukeproof Neutron AM, 45mm, Black Saddle: Nukeproof, Black Seatpost: Brand X Ascend internal, 31.6mm, M:150mm drop; L:170mm drop; XL/XXL:200mm drop Headset: Nukeproof, 44-56 IITS Grips: Nukeproof Sam Hill Signature Weight: 16.55kg Medium Tubeless Key Information: Material: Hydroformed 6061-T6 Triple-Butted Aluminium Fork Travel: 170mm Axle to Crown: 596mm Fork Offset: 44mm Rear Travel: 160mm Wheels Size: 29" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 230x62.5mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 4x F6802 LLU MAX, 4x 6902 LLU MAX, 2x F6902 LLU MAX-EA Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 34.9mm BB: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.
Specifically designed for the rigours of enduro racing, this full-suspension mountain bike (MTB) frame features a hydroformed and triple-butted aluminium build for the best balance of strength, durability and performance. Nukeproof has also equipped this model with a RockShox Super Deluxe Ultimate RCT rear shock for smooth and dependable rear end suspension performance as you race across demanding terrain conditions. Thanks to its race-ready geometry that includes internal cable routing, this version delivers a hassle-free, clean finish. One final highlight is its 148x12mm Boost rear hub spacing that increases stiffness and handling as you charge from trail to trail. For over 12 years, Nukeproof's best-selling model; the Mega has been racking up awards on Enduro stages and in the press around the world. With four Enduro World Series titles to its name, the Mega has become an icon that is synonymous with racing. Since 2009 the Nukeproof Mega has been on a constant development to meet the demands of Nukeproof's riders and customers alike. As a result, the Mega Alloy V4 frame is available for 27.5”, 29” or new Mixed (Front 29”/Rear 27.5” wheel sizes) wheel set ups, with each frame design tailored around each wheel size. To optimise the strength and weight, the Mega is constructed fully out of T6061-T6 aluminium including all forged parts. After winning four Enduro World Series Titles in three years the V4 design is an evolution of Nukeproof's ultimate enduro bike. At the heart of the frame is the brand's revised suspension Kinematic, designed to be more subtle off the top, whilst remaining progressive and predictable. Anti-Squat is used to create an effective pedalling bike that can be thrashed through technical terrain. The useable SAG range is also widened to allow riders to tune the suspension to the trails. Other key features include: · All new aluminium chassis · Designed and improved suspension kinematics · All new geometry · Optimised sizing/fit - Small to Large · SRAM UDH · Now fits a 750ml water bottle inside the main front triangle! The Mega frame is optimised around the rider and weight distribution. The geometry features dynamic saddle offset. Seat angles are optimised for each frame size and the seat tube itself is designed to take a longer dropper post if required. Features: Material: Hydroformed 6061-T6 Triple-Butted Aluminium Fork Travel: 170mm Axle to Crown: 582mm Fork Offset: 42mm Rear Travel: 165mm Wheels Size: Front 29”/Rear 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 230x62.5mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing Options: S/M/L Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 4x F6802 LLU MAX, 4x 6902 LLU MAX, 2x F6902 LLU MAX-EA Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 34.9mm BB: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Specification: Frame: Nukeproof Mega V4 297 Alloy, 165mm Travel, custom triple butted hydro-formed tube set Internal cable routing ISCG05 mount Enduro Bearings Threaded 73mm BB Boost 148mm rear axle spacing 3D contoured Rubber frame protection Shock: RockShox Super Deluxe Ultimate RCT, Custom LIN L1 HOTDOG S320 tune, 230x62.5mm, Bearing End, 2 bottomless tokens fitted Headset: Nukeproof, 44-56 IITS Weight: 3.87Kgs/8.53lbs (Medium)
Whether you're shredding your favourite local trails with your riding buddies or attacking some technical routes on your own, this full suspension mountain bike (MTB) frame is engineered for performance. It features a robust 6061 aluminium frame construction that's been put through a hydroforming and triple-butting process to ensure maximum strength and durability as you conquer your way around the mountain. Nukeproof has also equipped this model with a dependable RockShox Super Deluxe Ultimate RCT rear shock for smooth and consistent rear end suspension performance, whatever the trail conditions. Coming complete with 148x12mm Boost rear hub spacing and internal cable routing, this is an ideal choice of upgrade for handling the demands modern MTB trail riding. From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at. Triple-Butted Alloy MTB Frame The Alloy Reactor features a custom triple butted hydro-formed tube set and carbon seat stays, which help reduce the overall weight of the frameset. Critically this reduces the unsprung weight; making the suspension as active as possible. The Reactor is available for 27.5” or 29” wheel sizes. These are two totally different, compromise-free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size. Speed or play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”? Adjustable Geometry All Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”. Trail – As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents. Rail - The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities. Suspension Design To ensure the bike could climb as well as it descends, Nukeproof designed the four bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride. Features: Material: Hydroformed 6061 Triple-Butted Aluminium Fork Travel: 160mm (Comp 150mm) Axle to Crown: 555mm (Comp 545mm) Fork Offset: 46mm Rear Travel: 140mm Wheels Size: 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 210x55mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing Options: S/M/L/XL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS) Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 34.9mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM Maxle Stealth M12x1.75 180mm (Thread Length 20mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Specification: Frame: Nukeproof Reactor 275 Alloy, 140mm Travel, custom triple butted hydro-formed tube set for front triangle and chain stays, UD woven carbon fibre Seat stays Internal cable routing ISCG05 mount Enduro bearings Threaded 73mm BB Boost 148mm rear axle spacing 3D contoured Rubber frame protection Two position adjustable Flip chip system Shock: RockShox Super Deluxe Ultimate RCT, Custom ML 320 tune, 210x55mm, Bearing End, 1x bottomless token fitted Headset: Nukeproof, 44-56 IITS Weight: 3.79Kgs/8.3lbs (Medium option)
The Mega 297 Pro Alloy features a mixed wheel platform with a 29"-wheel up front and a 27.5" at the rear, giving the optimal balance of fast-rolling, all-terrain stability mixed with playfulness and agility. It also has a durable and lightweight custom-butted alloy frame with 170mm-travel RockShox ZEB suspension forks and a Super Deluxe rear shock. Ideal for riding with pace, stability and control over the most challenging terrains on Earth, the Mega Pro 297 is ready for anything. SRAM GX Eagle Groupset and Guide RE Hydraulic Disc Brakes This Mega 297 Pro is kitted out with a SRAM GX Eagle 12-Speed groupset that includes a wide-ranging 10-52T cassette and SRAM Guide RE hydraulic disc brakes. Nukeproof has it rolling upon Tubeless Ready Nukeproof Neutron V2 wheels wrapped in Maxxis Assegai and Minion DHR Tubeless Ready tyres. And it's fitted with a Brand X Ascend internally cable routed dropper seatpost. Enduro World Series Full Suspension Nukeproof Mega For over 10 years, Nukeproof's best-selling model - the Mega has been racking up awards on Enduro stages and in the press around the world. With 4 Enduro World Series titles to its name, the Mega has become an icon that is synonymous with racing. However, Nukeproof never rests on their laurels with the 4th generation Mega - Now available in an all-new mixed wheel size platform. Since 2009 the Nukeproof Mega has been on a constant development to meet the demands of our riders and customers alike. The Mega V4 is now available for 27.5”, 29” or new Mixed (Front 29”/Rear 27.5” wheel sizes) wheel setups, with each frame design tailored around each wheel size. The new mixed platform uses a 29” wheel up front to maximise grip and rolling efficiency whilst the 27.5” wheel out back, ensures nimble handling for manoeuvrability. Designed as an evolution of the ultimate Enduro bike, the Mega V4 has been fully reimagined to offer optimised sizing/fit, improved Geometry and suspension kinematics. Most importantly you can now fit a water bottle inside the main front triangle. Strong and Lightweight Alloy Full Custom Butted Frame The Alloy Mega features a full custom triple-butted hydro-formed 6061-T6 Aluminium tube set and forged parts. It is available for 27.5”, 297 or 29” wheel sizes. These are totally different, compromise-free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size so that you can get the most out of every ride. Updated Sizing and Geometry Whilst humans may not have changed size much in recent years; the bikes they choose to ride most certainly have. To ensure a perfectly dialled fit Nukeproof now offer 297 bikes in S, M, or L sizes and 290 bikes in M, L, XL or XXL. Lower, longer, steeper and slacker. Nukeproof's new geometry is now designed around the saddle offset for each size to optimise seated weight distribution. This results in steeper seat angles across the board but especially on larger sizes for taller riders. This in turn results in longer reach figures to ensure a comfortable cockpit on each size. To further aid the perfect fit they have also used shorter seat tubes which are designed to maximise seat post insertion depths. Finally, all new Mega bikes are now designed to use short offset forks to further improve both climbing and descending capabilities. Progressive and Supportive Mega Suspension Platform To step-change the Mega’s suspension design Nukeproof went back to the drawing board and started afresh. They redesigned the Mega 4 bar horst linkage to be super supple over small bumps, progressive and supportive throughout the mid-stroke for support when pedalling, cornering and pumping, with increased end stroke leverage to allow more tuning options with volume spacers. The new kinematic is designed to have higher levels of anti-squat for climbing gears but this reduces as you drop down the cassette. The result is a bike that is more confidence-inspiring everywhere on the hill. It behaves itself on the climbs yet can still be thrashed through the roughest and most technical terrain on the way back down. Features: Frame: Nukeproof Mega V4 297 Alloy, 165mm Travel, custom triple butted hydro-formed tube set, internal cable routing, ISCG 05 mount, Enduro Bearings, Threaded 73mm BB, Boost 148mm rear axle spacing, 3D contoured Rubber frame protection Fork: RockShox ZEB Select + Charger 2.1 RC 170mm, 44mm Offset, BOOST, Debonair, Gloss Black Shock: RockShox Super Deluxe Select+ RT, Custom LIN L1 HOTDOG S320 tune, 230x62.5mm, Bearing End, 2 bottomless tokens fitted Front Wheel: Nukeproof Neutron V2 29", Tubeless Ready, 32h, 110x15mm Rear Wheel: Nukeproof Neutron V2 27.5", Tubeless Ready, 32h, SRAM XD Driver with 36 points of engagement, 148x12mm Tyres: Front: Maxxis Assegai 29" x 2.5 WT, 3C MaxxGrip DD TR, Rear: Maxxis Minion DHR II 27.5" x 2.4 WT, 3C MaxxTerra DD TR Crankset: SRAM Descendant 7K Eagle 12-Speed, 170mm, 32T, B148, DUB Shifter: SRAM GX Eagle 12-Speed Rear Derailleur: SRAM GX Eagle 12-Speed Chain: SRAM GX Eagle 12-Speed Cassette: SRAM GX Eagle 12-Speed, CS XG1275 EAGLE 10-52T Chain Guide: Nukeproof Chain Guide with Bash, 28-36T, ISCG-05, Black Brakes: SRAM Guide RE Front Rotor: SRAM Centreline, 200mm Rear Rotor: SRAM Centreline, 200mm Handlebars: Nukeproof Horizon V2 25mm Rise, Width - S780mm, M780mm, L800mm Stem: Nukeproof Neutron AM, 45mm, Black Saddle: Nukeproof, Black Seatpost: Brand X Ascend internal, 31.6mm, S:125mm drop; M:150mm drop; L:170mm Drop Headset: Nukeproof, 44-56 IITS Grips: Nukeproof Sam Hill Signature Weight: 15.49kg Medium Tubeless Key Information: Material: Hydroformed 6061-T6 Triple-Butted Aluminium Fork Travel: 170mm Axle to Crown: 586mm Fork Offset: 44mm Rear Travel: 165mm Wheels Size: Front 29" / Rear 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 230x62.5mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 4x F6802 LLU MAX, 4x 6902 LLU MAX, 2x F6902 LLU MAX-EA Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 34.9mm BB: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.
The MegaV4: born through Evolution, not revolution. The Nukeproof Mega: an “enduro bike” that was ahead of its time. Originally developed and later named after the race it was designed for on the infamous trails of Alp D’Huez. To date the Mega platform is one of the most highly decorated race bikes on the market: with the 2017, 2018 (x2) and 2019 Enduro World Series Titles; a Downhill World Championship top 10 and a Silver Medal at the 4x World Championship to its name. (As well as a host of other national and international victories and titles) Since 2009, the Nukeproof Mega has been on a constant path of development to meet the evolving demands of Nukeproof's professional riders and its customers alike. They are relentlessly striving for improvements and with each generation, the Mega has been chiselled and shaped into today’s thoroughbred Enduro race bike. With the launch of the 2020 Carbon Mega 290c, you could forgive Nukeproof's designers for resting on their laurels. However, as its products are developed between the tapes, there is a constant desire to hone and refine in order to give its athletes and riders the best possible chance of standing on top of the podium. Designed as an evolution of the ultimate Enduro bike, the Mega V4 has been fully reimagined to offer optimised sizing/fit, improved geometry and suspension kinematics. Most importantly you can now fit a water bottle inside the main front triangle. Frame Construction: The Alloy Mega features a full custom triple-butted hydro-formed 6061-T6 Aluminium tube set and forged parts. It is available for 27.5”, 297 or 29” wheel sizes. These are totally different, compromise free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size so that you can get the most out of every ride. Updated Sizing/Geometry: Whilst humans may not have changed size much in recent years; the bikes they choose to ride most certainly have. To ensure a perfectly dialled fit Nukeproof now offers the 297 bikes in S, M, or L sizes and the 290 bikes in M, L, XL or XXL. Lower, longer, steeper and slacker! Nukeproof's geometry is now designed around the saddle offset for each size to optimise seated weight distribution. This results in steeper seat angles across the board but especially on larger sizes for taller riders. This in turn results in longer reach figures to ensure a comfortable cockpit on each size. To further aid the perfect fit they have also used shorter seat tubes which are designed to maximise seat post insertion depths. Finally, all Mega bikes are now designed to use short offset forks to further improve both climbing and descending capabilities. Suspension Design: To step-change the Mega’s suspension design Nukeproof went back to the drawing board and started afresh. They redesigned the Mega 4 bar horst linkage to be super supple over small bumps, progressive and supportive throughout the mid stoke for support when pedalling, cornering and pumping, with increased end stroke leverage to allow more tuning options with volume spacers. The kinematic is designed to have higher levels of anti-squat for climbing gears but this reduces as you drop down the cassette. The result is a bike that is more confidence inspiring everywhere on the hill. It behaves itself on the climbs; yet can still be thrashed through the roughest and most technical terrain on the way back down. Full Specification List: • Frame: Nukeproof Mega V4 290 Alloy, 160mm Travel, custom triple butted hydro-formed tube set, internal cable routing, ISCG 05 mount, Enduro Bearings, Threaded 73mm BB, Boost 148mm rear axle spacing, 3D contoured Rubber frame protection • Fork: RockShox ZEB Select + Charger 2.1 RC 170mm, 44mm Offset, BOOST, Debonair, Gloss Black • Shock: RockShox Super Deluxe Select+ RT, Custom LIN L1 HOTDOG S320 tune, 230x62.5mm, Bearing End, 2 bottomless tokens fitted. • Front Wheel: Nukeproof Neutron V2 29", Tubeless Ready, 32h, 110x15mm • Rear Wheel: Nukeproof Neutron V2 29", Tubeless Ready, 32h, SRAM XD Driver with 36 points of engagement, 148x12mm • Tyres: Front: Maxxis Assegai 29" x 2.5 WT, 3C MaxxGrip DD TR, Rear: Maxxis Minion DHR II 29” x 2.4 WT, 3C MaxxTerra DD TR • Crankset: SRAM Descendant 7K Eagle 12-Speed, 170mm, 30T, B148, DUB • Shifter: SRAM GX Eagle 12-Speed • Rear Derailleur: SRAM GX Eagle 12-Speed • Chain: SRAM GX Eagle 12-Speed • Cassette: SRAM GX Eagle 12-Speed, CS XG1275 EAGLE 10-52T • Chain Guide: Nukeproof Chain Guide with Bash, 28-36T, ISCG-05, black • Brakes: SRAM Guide RE • Front Rotor: SRAM Centreline, 200mm • Rear Rotor: SRAM Centreline, 200mm • Handlebars: Nukeproof Horizon V2 25mm Rise, Width - M780mm, L800mm, XL800mm, XXL800mm • Stem: Nukeproof Neutron AM, 45mm, black • Saddle: Nukeproof, Black • Seatpost: Brand X Ascend internal, 31.6mm, M:150mm drop; L:170mm drop; XL/XXL:200mm • Headset: Nukeproof, 44-56 IITS • Grips: Nukeproof Sam Hill Signature • Weight: 15.52kg (Medium, Tubeless) Please Note: Due to severe delays in the bicycle supply chain, Nukeproof has been forced to make some alterations to the specification of the component parts supplied with this bicycle. As a result, the specification may differ from those shown in the images. Please refer to the specification table above for accurate information. Key Specifications: Material: Hydroformed 6061-T6 Triple-Butted Aluminium Fork Travel: 170mm Axle to Crown: 586mm Fork Offset: 44mm Rear Travel: 160mm Wheels Size: 29" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 230x62.5mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing: M/L/XL/XXL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 4x F6802 LLU MAX, 4x 6902 LLU MAX, 2x F6902 LLU MAX-EA Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 34.9mm BB: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab.
From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at. Frame Construction: The Alloy Reactor features a custom triple butted hydro-formed tube set and carbon seat stays, which help reduce the overall weight of the frameset. Critically this reduces the unsprung weight; making the suspension as active as possible. The Reactor is available for 27.5” or 29” wheel sizes. These are two totally different, compromise free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size. Speed or play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”? Adjustable Geometry: All Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”. Trail – As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents. Rail - The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities. Suspension Design: To ensure the bike could climb as well as it descends, Nukeproof designed the 4-bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride. Full Specification List: • Frame: Nukeproof Reactor 275 Alloy, 140mm Travel, custom triple butted hydro-formed tube set for front triangle and chain stays, UD woven carbon fibre Seat stays, internal cable routing, internal cable routing, ISCG 05 mount, Enduro bearings, threaded 73mm BB, Boost 148mm rear axle spacing, 3D contoured rubber frame protection. • Fork: RockShox Lyrik Select + Charger 2.1 RC 160mm, 46mm Offset, BOOST, Debonair, Gloss Black • Shock: RockShox Super Deluxe Select+ RT, Custom 320 tune, 210x55mm, Bearing End, 1x bottomless token fitted. • Front Wheel: Nukeproof Neutron V2 27.5", Tubeless Ready, 32h, 110x15mm • Rear Wheel: Nukeproof Neutron V2 27.5", Tubeless Ready, 32h, SRAM XD Driver with 36 points of engagement, 148x12mm • Tyres: Front: Maxxis Assegai 27.5”x2.5 WT 3C MaxxTerra/EXO+/TR, Rear: Maxxis Dissector 27.5”x2.4 WT 3C MaxxTerra/EXO+/TR • Crankset: SRAM GX Eagle 12-Speed, 170mm, 32T, B148, DUB • Shifter: SRAM GX Eagle 12-Speed • Rear Derailleur: SRAM GX Eagle 12-Speed • Chain: SRAM GX Eagle 12-Speed • Cassette: SRAM GX Eagle 12-Speed, CS XG1275 EAGLE 10-52T • Brakes: SRAM Guide RE • Front Rotor: SRAM Centreline, 200mm • Rear Rotor: SRAM Centreline, 180mm • Handlebars: Nukeproof Horizon V2 25mm Rise, Width - S780mm, M780mm, L800mm, XL800mm • Stem: Nukeproof Neutron AM, 45mm, black • Saddle: Nukeproof, Black • Seatpost: Brand-X Ascend internal, 31.6mm, S:125mm drop; M:150mm drop; L: 170mm; XL:200mm drop • Headset: Nukeproof, 44-56 IITS • Grips: Nukeproof Sam Hill Signature • Weight: 14.51kg Medium Tubeless Please Note: Due to severe delays in the bicycle supply chain, Nukeproof has been forced to make some alterations to the specification of the component parts supplied with this bicycle. As a result, the specification may differ from those shown in the images. Please refer to the specification table above for accurate information. Key Specifications: Material: Hydroformed 6061 Triple-Butted Aluminium Fork Travel: 160mm Axle to Crown: 552mm Fork Offset: 46mm Rear Travel: 140mm Wheels Size: 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 210x55mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing: S/M/L/XL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS) Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 34.9mm BB: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: Sram Maxle Stealth M12x1.75 180mm (Thread Length 20mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab.
Designed for Nukeproof Reactor Alloy 290 model, this genuine Nukeproof chain stay protector features a durable moulded silicone construction. Plus, it attaches to your frame's chain stay via the 3M adhesive backing and is a superb barrier against bangs, dings and dirt.
Engineered specifically for the 2020 Nukeproof Reactor Alloy 275 and 290 models, this genuine Nukeproof protector provides an exceptional barrier against mud, muck and riding mishaps thanks to their durable moulded silicone construction. It attaches to your frame's downtube via its 3M adhesive backing and offers outstanding protection against all types of dirt and damage.
This trail-ready mountain bike (MTB) frame features a rock-solid 6061 aluminium build, which makes it more than capable of enduring the most demanding of terrain conditions. Nukeproof has also put this model through a hydroforming and triple-butting process for extra durability as you charge from trail to trail. Another highlight is its RockShox Super Deluxe Ultimate RCT rear shock, which gives you increased tuneability and control from your rear end suspension's performance. This makes it ideal for blasting across rock gardens, tree roots and whatever the trail has to throw at you on your ride. Benefitting from updated geometry, internal cable routing and 148x12mm rear hub spacing, this full-suspension MTB frame is fully equipped for the rigours of modern trail riding. From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at. Full Suspension Alloy MTB Frame The Alloy Reactor features a custom triple butted hydro-formed tube set and carbon seat stays, which help reduce the overall weight of the frameset. Critically this reduces the unsprung weight; making the suspension as active as possible. The Reactor is available for 27.5” or 29” wheel sizes. These are two totally different, compromise free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size. Speed or play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”? Adjustable Geometry All Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”. Trail – As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents. Rail - The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities. Suspension Design To ensure the bike could climb as well as it descends, we designed the four bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride. Features: Material: Hydroformed 6061 Triple-Butted Aluminium Fork Travel: 150mm Axle to Crown: 564mm Fork Offset: 44mm Rear Travel: 130mm Wheels Size: 29" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 210x50mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing Options: M/L/XL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS) Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 34.9mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM Maxle Stealth M12x1.75 180mm (Thread Length 20mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Specification: Frame: Nukeproof Reactor 290 Alloy, 130mm Travel, custom triple butted hydro-formed tube set for front triangle and chain stays, UD woven carbon fibre Seat stays Internal cable routing ISCG05 mount Enduro bearings Threaded 73mm BB Boost 148mm rear axle spacing 3D contoured Rubber frame protection Two position adjustable Flip chip system Shock: RockShox Super Deluxe Ultimate RCT, Custom ML 320 tune, 210x50mm, Bearing End, 1x bottomless token fitted Headset: Nukeproof, 44-56 IITS Weight: 3.72Kgs/8.2lbs (Medium option)
The alloy Scout 275 frame is engineered from durable and lightweight triple-butted hydro-formed 6061 aluminium and compatible with 27.5" wheels, 140mm-travel suspension forks and offers tyre clearance for 2.6"-wide trail tyres - the Scout 275 is a superb go-anywhere, do-it-all hardtail mountain bike (MTB) frame. The Hardtail: Often mooted as the perfect style bike to master your first pedal strokes into the world of mountain biking or the best way to develop your bike handling skills. Mastering a hardtail will sharpen your skills from perfecting your balance point on the bike through to being creative with the trail ahead reading natural features to generate speed. One thing is for sure though; you shouldn’t underestimate what this hardtail is truly capable of. The all-new Scout is a graduate of the school of gravity. Its geometry is on the “aggressive” side of the coin, designed to attack the trail ahead. The new pedalling position, developed using Nukeproof’s Saddle Offset theory, will propel you efficiently up the trail-ready for the gnarliest descent you can handle. The new geometry adds to the all-around capability of the Scout. Improved riding position and sizing combined with a low bottom bracket enhances your control in the corners. The Scout is a versatile frame; ready to scout out endless singletrack, session technical enduro trails or just hoon around like you’re auditioning for the latest “Scoutin’ About” video epic. The Nukeproof Scout is the embodiment of the Nukeproof attitude. In riding a Scout, you become part of something special; every ride of this hardcore hardtail rewards every last drop of your skill and commitment when riding. In owning a Scout, you are inducted into something a little bit special too, that subtle nod of appreciation from other Scout owners that you too know what a special frame this is, through to the support and community that has grown around Scout ownership. The New Scout, welcome to the world of Scoutin’ about, it really is an attitude. The 3rd generation of the Scout has been tweaked to be the finest vintage of Scout. Key upgrades include: All New Frame: The frame itself has matured slightly. Subtle touches such as moulded protection through to new UDH (universal derailleur hanger) dropouts to name but a few of the upgrades. “Tweaked” Geometry: Nukeproof loved the way the V2 Scout rode, but a few subtle updates to areas such as the seat tube and head tube angles make this latest version even better. Improved Sizing: The new Scout offers size specific chainstays as well as improved spacing of sizes to match the rest of the Nukeproof range. Sizing: Scout comes from Small to XL in 275 and Medium to XXL in the 290 version, with updated geometry to give the V3 Scout more efficiency to the trails and more attitude on the trails. The all-new Nukeproof Scout builds on the cult-like “Scoutin’ About” attitude of the hardtail. Buying a Scout means not only do you get the raddest hardtail on the market, join one of the best communities of bikers. Specification: Frame: Nukeproof Scout 275, custom triple butted hydro-formed 6061-T6 Aluminium tubeset Internal cable routing for Dropper Seatpost ISCG05 mount Threaded 73mm BB Boost 148mm rear axle spacing Seatclamp: Nukeproof Horizon 34.9mm Headset: Nukeproof, 44-56 IITS 3D Contoured Rubber Frame Protection for DT/SS/CS Weight: 2.3kgs/5lbs (Medium) Key Features: Material: Hydroformed 6061 Triple-Butted Aluminium Fork Travel: 140mm (150mm RS) Axle to Crown: 532mm Fork Offset: 44mm Wheels Size: 27.5" Max Tyre Size: 2.6" Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 34.9mm BB: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Chain Guide: ISCG05 Brake Mount: 180mm Post Mount Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Max Chainring Size: 34T (32T Oval)
The Scout 290 Race features a strong and lightweight alloy frame that is engineered to be agile, durable and versatile. Nukeproof has equipped it with RockShox Recon Silver suspension forks and a Shimano Deore 10-Speed groupset with an 11-46T wide-ranging cassette and powerful hydraulic disc brakes. It also rolls fast and stable upon Nukeproof Neutron V2 hubs and WTB ST i30 Tubeless Ready rims wrapped in Schwalbe Magic Mary and Nobby Nic tyres. The Hardtail: Often mooted as the perfect style bike to master your first pedal strokes into the world of mountain biking or the best way to develop your bike handling skills. Mastering a hardtail will sharpen your skills from perfecting your balance point on the bike through to being creative with the trail ahead reading natural features to generate speed. One thing is for sure though; you shouldn’t underestimate what this hardtail is truly capable of. The all-new Scout is a graduate of the school of gravity. Its geometry is on the “aggressive” side of the coin, designed to attack the trail ahead. The new pedalling position, developed using Nukeproof’s Saddle Offset theory, will propel you efficiently up the trail-ready for the gnarliest descent you can handle. The new geometry adds to the all-around capability of the Scout. Improved riding position and sizing combined with a low bottom bracket enhances your control in the corners. The Scout is a versatile frame that is ready to scout out endless singletrack, session technical enduro trails or just hoon around like you’re auditioning for the latest “Scoutin’ About” video epic. The Nukeproof Scout is the embodiment of the Nukeproof attitude. When riding a Scout, you become part of something special and every ride of this hardcore hardtail rewards every last drop of your skill and commitment. You are inducted into something a little bit special too, that subtle nod of appreciation from other Scout owners that you too know what a special frame this is, through to the support and community that has grown around Scout ownership. The New Scout, welcome to the world of Scoutin’ About, it really is an attitude. The 3rd generation of the Scout has been tweaked to be the finest vintage of Scout. Key Upgrades Include: All-New Frame: The frame itself has matured slightly. Subtle touches such as moulded protection through to new UDH (universal derailleur hanger) dropouts to name but a few of the upgrades “Tweaked” Geometry: Nukeproof loved the way the V2 Scout rode, but a few subtle updates to areas such as the seat tube and head tube angles make this latest version even better Improved Sizing: The new Scout offers size specific chainstays as well as improved spacing of sizes to match the rest of the Nukeproof range Sizing: Scout comes from Small to XL in 275 and Medium to XXL in the 290 version, updated geometry to give the V3 Scout more efficiency to the trails and more attitude on the trails The all-new Nukeproof Scout builds on the cult-like “Scoutin’ About” attitude of the hardtail. Buying a Scout means not only do you get the raddest hardtail on the market, join one of the best communities of bikers Features: Frame: Nukeproof Scout 290, custom triple butted hydro-formed Alloy, internal cable routing for dropper seat posts, ISCG 05 mount, threaded 73mm BB, Boost 148mm rear axle spacing, includes 3D Contoured Rubber Frame Protection for Down Tube, Seat Stay and Chain Stay Fork: RockShox Recon Silver RL, 140mm, 42mm Offset, Solo Air, Gloss Black Front Wheel: Nukeproof Neutron V2 Hub 15x110mm, built onto a 29” WTB STi30 TCS 2.0 Rim, 32H Rear Wheel: Nukeproof Neutron V2 Hub 15x110mm, Shimano freehub with 36 points of engagement, 148x12mm, built onto a 29” WTB STi30 TCS 2.0Rim, 32H Tyres: Front: Schwalbe Magic Mary, Snakeskin, TL Easy, Addix Soft, 29x2.35"; Rear: Schwalbe Nobby Nic, DD, RaceGuard, TL Easy, Addix, 29x2.35" Crankset: Shimano M5100 Deore 10 Speed Crank, 170mm, 30T, 52mm Chainline Shifter: Shimano M4100-R Deore 10-Speed, (I-Spec EV) Rear Derailleur: Shimano M5120 Deore 10-Speed Chain: KMC X10 10-Speed, with Quick Link Cassette: Sunrace CSMS2 10-Speed, 11-46T Black Brakes: Shimano MT4100 Lever with Shimano MT410 2 Pot Caliper, Resin Pads Front Rotor: Shimano SM-RT56, 180mm Rear Rotor: Shimano SM-RT56, 180mm Handlebars: Nukeproof Neutron V2 25mm Rise, Width – M780mm, L800mm, XL800mm, XXL800mm Stem: Nukeproof Neutron AM, 45mm, Black Saddle: Nukeproof Neutron, Black Seatpost: Nukeproof Neutron, Black, 31.6mm, 450mm Headset: Nukeproof Warhead, 44-56 IITS Grips: Nukeproof Sam Hill Signature Weight: TBC Specification: Material: Hydroformed 6061 Triple-Butted Aluminium Fork Travel: 140mm Axle to Crown: 553mm Fork Offset: 42mm Wheels Size: 29" Max Tyre Size: 2.6" Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 34.9mm BB: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Chain Guide: ISCG05 Brake Mount: 180mm Post Mount Max Chainring: 34T (32T Oval) Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.