Park Tool Wheel Alignment Gauge (WAG-5)To get the best performance from your wheels and bike, correctly dished wheels are vital. The Part Tool Portable wheel Dishing Tool makes the checking of wheel dish quick and accurate. You can easily ascertain how centrally the rim sits over the hub, avoiding the issues surrounding a poorly dished wheel, such as frame rub. Features:A sturdy yet portable wheel dishing toolFits wheels from 24 inches - 29 inches in diameter, including 700C road wheelsDisassembles quickly for storage or travelMade in the USALimited lifetime warrantyBuy Park Tool Workshop Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Derailleur Hanger Alignment Gauge DAG2.2An essential tool for your workshop, this Derailleur Hanger Alignment Gauge from Park Tool makes quick work of the task at hand. Constructed from heavy-gauge, chrome-plated steel, this is a hard-wearing tool that is suitable for wheel sizes from 20" to 29" inch and works with all bicycles that feature a derailleur. Features:Gauge Bar Material: Heavy gauge, chrome-plated steelCompatibility: Compatible with virtually all derailleur-equipped bicycles including Shimano® Direct Mount hangersLength: 16 inches (41cm)Adjusts to fit 20" to 29"+ wheelsReplaceable threaded tipUpgraded large inner shaft for added strength*Tighter tolerances for improved accuracy*Improved clearance and reach to fit more frame/hanger combos including low clearance thru-axle derailleur hangers**Compared to DAG-2Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Professional Wheel Alignment Gauge WAG-4For a wheel to perform properly, it is important for the rim to be centered between the locknuts of the hub, or “dished”. To check this, and to make precision adjustments, a wheel alignment gauge (also called a “dishing tool”) is a must.An accurate and truly versatile wheel alignment gauge that belongs along side every truing stand.Features:The WAG-4 allows easy checking of the dish on road, mountain, or BMX wheels from 16” to 29” (ETRTO or ISO rim sizing of 305-630)Works with any hub widthCan be accurately used with the tire still on the wheelWeight: 1.7lbs. (0.77 kilograms) Buy Park Tool Workshop Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
An accurate and truly versatile wheel alignment gauge that belongs along side every truing stand.
Taking it's reading directly from the dropout, the FAG-2 will precisely tell you what level of realignment is required to get your bike back to its peak performance. Off-kilter frames often have a detrimental impact on how your bike rides and even after wheel and derailleur adjustments, your wheels may still not be lined up properly. However, with this Frame Alignment Gauge and its retractable pointer, the exact realignment can be pin-pointed quickly and precisely for any size of bike. The FAG-2 is an ideal device to help make sure your bike and wheels are perfectly aligned for optimum performance.
These T-shaped, long-levered tools are ideal for accurately determining bike/fork dropout misalignment and straightening them back to their optimum fitting. Comfortable moulded grips make the job of realignment quick and easy, preventing potential shifting, tracking and steering problems and damage to axles and quick-release skewers. A fantastic tool for an essential piece of maintenance, the Frame & Fork Alignment Gauge Set FFG-2 will keep you on the straight and narrow.
An essential tool for measuring and straightening off-kilter hangers, the Park Tool derailleur hanger alignment tool has improved upon its predecessor, the DAG-2, with increased strength, tighter tolerances for greater accuracy and improved clearance and reach for a wider range of frame/hanger combinations. Adjustable to allow you to work on wheels ranging from 20" to 29" +, the heavy gauge steel and chrome plated Park Tool DAG-2.2 will also fit Shimano Direct Mount hangers, making it a fantastically versatile, must-have tool for anyone serious about maintaining their bike.
The Park Tool FAG2 Frame Alignment Gauge helps solve the problem of many bicycles not shifting or tracking properly. This can be the result of the front and rear wheels not being in line with the frame. If these conditions still exist after wheel and derailleur adjustments, the seat stays, chain stays, and rear drop-outs of the frame may be misaligned. For years the accepted method to check the alignment of the rear drop-out was to run a string on either side. This method does work to some extent. However, it is not accurate because the measurement is not taken at the drop-out. With the Park Tool Frame Alignment Gauge the alignment can be checked quickly and accurately at the drop-out. Retractable pointer to fit all sizes and types of bicycles.
The Park Tool FFG2 Frame And Fork End Alignment Gauge Set helps to eliminate improperly aligned frame and fork dropouts. Such issues can cause bent axles and quick release skewers, as well as tracking and shifting problems. The updated FFG-2 quickly determines whether dropouts are aligned and parallel. If an error is detected, long handles and comfortable molded grips afford plenty of leverage for straightening. Works on frames and forks with dropout spacing up to 160mm.
The Park Tool DAG2.2 Derailleur Hanger Alignment Gauge can help solve a multitude of derailleur shifting problems, most notably with index shifting systems. Updated over the longstanding DAG-1, the DAG-2.2 utilises a longer measuring pointer, longer threaded stud and a longer, narrower alignment boss to fit a wider variety of bikes. This tool is extremely steady in operation and is simple to use. The tool threads directly into the derailleur hanger. The gauge bar holds a gauge which marks the distance to the wheel. The gauge then is rotated with the wheel to the 3, 6, 9, and 12 o clock positions, noting any differences in measurements. The alignment of the derailleur hanger is accomplished by applying pressure to the tool s arm. The results can be checked instantly. The DAG-2.2 is made of heavy-gauge steel and is chrome plated for long shop life.
LifeLine Pro Disc Brake Caliper Alignment ToolLifeLine's disc brakes caliper alignment tool enables you to get optimum disc brake performance and equal brake pad spacing while reducing pad rubbing and brake squeal. This easy to use tool sets the correct clearance so that both brake pads connect with the rotor at the same time when you're applying pressure to the brake lever. Providing more efficient braking power and a greater pad-life, this essential maintenance tool should be in every disc brake user's toolbox.Follow the simple steps below: Loosen the bolts holding the brake caliper to the adaptor/frame. Just loosen it sufficiently so that the brake caliper can slide from side to side Insert the Caliper Alignment Tool between the pads and the rotor Pull the brake lever, forcing the pads against the alignment tool and against the rotor While still holding on to the brake lever, tighten the bolts on the brake caliper Release the brake lever and remove the tool and your pads should now be centred to the rotor with an equal distance either sideFeatures: Size: 15cm x 3.5cm Blade Length: 13cm Weight: 33gBuy LifeLine Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
LifeLine Pro Gear Hanger Alignment ToolIf you're encountering shifting problems, your gear hanger may only need a slight adjustment to get your rear derailleur changing gear cleaning and efficiently again. Lifeline's alignment tool will help you to carefully and precisely make the required adjustments to your gear hanger, without damaging your hanger or the bike's frame.Reasons to Buy: Make careful and precise adjustments to your gear hanger. Resolve shifting problems easier. Won't cause damage to your hanger or frame.Features: Threaded end threads into hanger threads Measuring pointer checks for parallelism against rear wheelBuy LifeLine from Chain Reaction Cycles, the World's Largest Online Bike Store.