Alé PRR Magnitude Cycling JacketWith a windproof and waterproof Windtex membrane and a soft microfleece inside, the Ale PRR Magnitude Cycling Jacket brings luxurious comfort and cosiness to your winter cycling sessions.Other riders might be putting their feet up when the weather is cold and damp. But that's not you. You'll be pulling on your PRR Magnitude Cycling Jacket and ticking off another winter training session. With many winter jackets, you can find that when you push the pace you'll quickly build a sweat. You then suffer from sweat-induced shivers when easing the pace. However, the fabrics used for the Magnitude allow excellent breathability during more intense training efforts. This lets sweat escape quickly and the result is you'll remain at just the right temperature for comfort. A combination of softshell fabrics also gives you excellent protection against both wind and rain. 3-layer W-Wind 3L Square with Windtex MembraneThis high-performance laminated fabric offers both wind and water protection alongside cosy warmth. The Windtex membrane offers a waterproof rating of 10,000mm and blocks winds completely too. The inner face is a soft grid-square fleece that creates air pockets that trap warm air and retains body heat. 3-Layer Wave DWRThis laminated fabric offers rain protection while also offering excellent breathability and windproof protection. To the inside, a 'WAVE' design has been engineered to improve sweat-wicking and maintain 'air chambers' that regulate body temperature. Racing FitThe fit of the jacket is tailored to be close to the body and streamlined. This increases your cycling efficiency, saving precious energy for those last few kilometres of winter base rides. FeaturesMaterials: 87% Polyester, 13% Elastane3-layer W-Wind 3L Square with Windtex membrane - rated 10,000mm water columnB-Tour DWR + W-Wind 3L Wave DWRQuick-wicking and breathableRacing Fit - optimised for aerodynamics - for a regular fit we recommend going up a sizeSuggested temperature range: -2 to 8 degrees CBuy Alé Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Front pannier rack with Bamboo tray compatible with Treadwell model Cannondale bikes.
Federal freecoaster hub V4 now with hubguards. This hub uses the same technology as the previous versions with the spacers for an adjustable gap with updated reliable hardware. Comes in 9t only. When ordering let us know in the special instructions whether you would like the gap setup either x-large, large, medium or small and we can adjust this for you. Federal freecoasters are very tricky to adjust and we only recommend adjusting if you know what your doing. ###section### Product Specs HUB TYPE:Freecoaster AXLE:14mm Male DRIVER:9t SPOKE HOLES:36h WEIGHT:669g / 23.6oz
The Back Street Pro is BSD's new street ready hub. BSD have designed the Back Street Pro around their own custom driver with skip free mechanism while still maintaining a compact sized shell. With features such as bombproof 14mm male axle, chromo cones and a hefty 6903 bearings, you know this hub is built street tough ###section### Product Specs HUB TYPE:Cassette AXLE:14mm Male DRIVER:9t SPOKE HOLES:36h WEIGHT:TBC
If you love to challenge yourself on the bike, riding ever further or pushing your muscles to propel you faster and faster, the Women's Velocity HD Bib Shorts are the perfect support for your performance. The main fabric is super-light, with a barely-there feel against the skin and yet gives perfect coverage and compression. Elsewhere, the Velocity shorts use Ale's wind-tunnel tested Aero 3D fabric. A jacquard structure contributes to improved airflow, minimising drag as speeds increase. Excellent elasticity and recovery offer excellent durability and smooth pedalling. when anaerobic efforts have legs burning it also provides excellent support, encouraging improved venous return and muscle recovery. Y-Air Bib System With their Y-Air Bib System, Ale has increased comfort by lessening the contact area between the straps and your skin. With more skin open to the air, both breathability and ventilation are improved. Thanks to the Y-shaped back, the short’s stability and position are also maintained perfectly. Soft microfibre straps with a raw-cut finish promote a feeling of lightweight comfort and freshness too. Ale Women's W8H+ EVO seat pad At the heart of the shorts is the Women's W8H+ EVO seat pad, created for endurance riding comfort. An elastic microfibre gives against the skin comfort while memory padding, strategically positioned at the saddle contact points provides unrivalled support. In the perineal and ischiatic area, high-density 120kg/m³ padding ensures the very best support on the saddle and vibration-damped comfort across even the roughest of roads. Meanwhile, a central relief channel protects sensitive nerve endings while lateral shaped flexible wings follow the body for complete freedom of movement and comfort when pedalling
Kask Valegro Road Cycling Helmet (Matte Finish-WG11)If you like your kit to be light in weight, you can't go wrong with barely-there Kask Valegro Road Cycling Helmet (Matte Finish-WG11). Despite the low weight, it's incredibly protective too, passing the rigorous WG11 International Safety Test. Kask's aim with their Valegro Road Cycling Helmet was to give you the finest level of ventilation while cutting no corners on safety. This they have achieved via their patented MIT technology and precisely engineered vents. MIT uses a polycarbonate shell fused to an impact-absorbing inner EPS liner. By directly joining the layers together shock absorption is improved. At the same time, this engineered solution has allowed Kask to give the Valegro 37 vents without effecting strength and protection. With it's highly vented design air is able to rush inside and warm, damp air easily exhausts to the rear. A highly breathable and quick-wicking interior pad system sees head to pad contact reduced by 70% facilitating even more airflow to your scalp, keeping you cooler as you turn up the power. WG11 Safety TestThe Valegro passes the stringent WG11 test. This focuses on protection from rotational impact forces, measuring rotational kinematics from both oblique and normal impacts. With this safety test passed, you can be sure the Valegro has you covered should you be unfortunate enough to fall from your bike. Kask Octo-FitThe Kask Octo-Fit offers both excellent security and a precise fit. A rubberised Micro Dial adjuster provides an improved finger grip for adjustment. Floating cradle contact and supports are designed to oscillate freely through 180° allowing a perfect fit on any shaped head. The Skeletal Brackets of the cradle have been designed and refined to provide the best fit and support whilst being as light as possible.Resistex® padding Fast-wicking and quick-drying Resistex® padding draws moisture away from your head to keep you drier as your more intense efforts create heat and sweat. This works with the engineered airflow to boost all-ride comfort and the pads are washable to ensure freshness. Features:MIT In-Moulding technology assures a far better level of shock absorptionHighly breathable with fast wicking internal lining and 37 air ventsOcto fit rubberised micro dial adjuster secures fit easily and allows on the bike adjustability5mm 3D Resistex® padding - antistatic, antibacterialEco-leather chinstrap offers a plush and comfortable fitHead to pad contact reduced by 70%Passes WG11 International Safety Test and CE-EN-1078Weight: 180g (S)Buy Kask Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
Kask Valegro Road Cycling Helmet (Matte Finish-WG11)If you like your kit to be light in weight, you can't go wrong with barely-there Kask Valegro Road Cycling Helmet (Matte Finish-WG11). Despite the low weight, it's incredibly protective too, passing the rigorous WG11 International Safety Test. Kask's aim with their Valegro Road Cycling Helmet was to give you the finest level of ventilation while cutting no corners on safety. This they have achieved via their patented MIT technology and precisely engineered vents. MIT uses a polycarbonate shell fused to an impact-absorbing inner EPS liner. By directly joining the layers together shock absorption is improved. At the same time, this engineered solution has allowed Kask to give the Valegro 37 vents without effecting strength and protection. With it's highly vented design air is able to rush inside and warm, damp air easily exhausts to the rear. A highly breathable and quick-wicking interior pad system sees head to pad contact reduced by 70% facilitating even more airflow to your scalp, keeping you cooler as you turn up the power. WG11 Safety TestThe Valegro passes the stringent WG11 test. This focuses on protection from rotational impact forces, measuring rotational kinematics from both oblique and normal impacts. With this safety test passed, you can be sure the Valegro has you covered should you be unfortunate enough to fall from your bike. Kask Octo-FitThe Kask Octo-Fit offers both excellent security and a precise fit. A rubberised Micro Dial adjuster provides an improved finger grip for adjustment. Floating cradle contact and supports are designed to oscillate freely through 180° allowing a perfect fit on any shaped head. The Skeletal Brackets of the cradle have been designed and refined to provide the best fit and support whilst being as light as possible.Resistex® padding Fast-wicking and quick-drying Resistex® padding draws moisture away from your head to keep you drier as your more intense efforts create heat and sweat. This works with the engineered airflow to boost all-ride comfort and the pads are washable to ensure freshness. Features:MIT In-Moulding technology assures a far better level of shock absorptionHighly breathable with fast wicking internal lining and 37 air ventsOcto fit rubberised micro dial adjuster secures fit easily and allows on the bike adjustability5mm 3D Resistex® padding - antistatic, antibacterialEco-leather chinstrap offers a plush and comfortable fitHead to pad contact reduced by 70%Passes WG11 International Safety Test and CE-EN-1078Weight: 180g (S)Buy Kask Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
Kask Valegro Road Cycling Helmet (Matte Finish-WG11)If you like your kit to be light in weight, you can't go wrong with barely-there Kask Valegro Road Cycling Helmet (Matte Finish-WG11). Despite the low weight, it's incredibly protective too, passing the rigorous WG11 International Safety Test. Kask's aim with their Valegro Road Cycling Helmet was to give you the finest level of ventilation while cutting no corners on safety. This they have achieved via their patented MIT technology and precisely engineered vents. MIT uses a polycarbonate shell fused to an impact-absorbing inner EPS liner. By directly joining the layers together shock absorption is improved. At the same time, this engineered solution has allowed Kask to give the Valegro 37 vents without effecting strength and protection. With it's highly vented design air is able to rush inside and warm, damp air easily exhausts to the rear. A highly breathable and quick-wicking interior pad system sees head to pad contact reduced by 70% facilitating even more airflow to your scalp, keeping you cooler as you turn up the power. WG11 Safety TestThe Valegro passes the stringent WG11 test. This focuses on protection from rotational impact forces, measuring rotational kinematics from both oblique and normal impacts. With this safety test passed, you can be sure the Valegro has you covered should you be unfortunate enough to fall from your bike. Kask Octo-FitThe Kask Octo-Fit offers both excellent security and a precise fit. A rubberised Micro Dial adjuster provides an improved finger grip for adjustment. Floating cradle contact and supports are designed to oscillate freely through 180° allowing a perfect fit on any shaped head. The Skeletal Brackets of the cradle have been designed and refined to provide the best fit and support whilst being as light as possible.Resistex® padding Fast-wicking and quick-drying Resistex® padding draws moisture away from your head to keep you drier as your more intense efforts create heat and sweat. This works with the engineered airflow to boost all-ride comfort and the pads are washable to ensure freshness. Features:MIT In-Moulding technology assures a far better level of shock absorptionHighly breathable with fast wicking internal lining and 37 air ventsOcto fit rubberised micro dial adjuster secures fit easily and allows on the bike adjustability5mm 3D Resistex® padding - antistatic, antibacterialEco-leather chinstrap offers a plush and comfortable fitHead to pad contact reduced by 70%Passes WG11 International Safety Test and CE-EN-1078Weight: 180g (S)Buy Kask Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
Kask Valegro Road Cycling Helmet (WG11)Impressively light and offering outstanding ventilation, the Kask Valegro Road Cycling Helmet (WG11) is ideal for when the heat is high and effort levels intense. Kask's aim with their Valegro Road Cycling Helmet was to give you the finest level of ventilation while cutting no corners on safety. This they have achieved via their patented MIT technology and precisely engineered vents. MIT uses a polycarbonate shell fused to an impact-absorbing inner EPS liner. By directly joining the layers together shock absorption is improved. At the same time, this engineered solution has allowed Kask to give the Valegro 37 vents without effecting strength and protection. With it's highly vented design air is able to rush inside and warm, damp air easily exhausts to the rear. A highly breathable and quick-wicking interior pad system sees head to pad contact reduced by 70% facilitating even more airflow to your scalp, keeping you cooler as you turn up the power. WG11 Safety TestThe Valegro passes the stringent WG11 test. This focuses on protection from rotational impact forces, measuring rotational kinematics from both oblique and normal impacts. With this safety test passed, you can be sure the Valegro has you covered should you be unfortunate enough to fall from your bike. Kask Octo-FitThe Kask Octo-Fit offers both excellent security and a precise fit. A rubberised Micro Dial adjuster provides an improved finger grip for adjustment. Floating cradle contact and supports are designed to oscillate freely through 180° allowing a perfect fit on any shaped head. The Skeletal Brackets of the cradle have been designed and refined to provide the best fit and support whilst being as light as possible.Resistex® padding Fast-wicking and quick-drying Resistex® padding draws moisture away from your head to keep you drier as your more intense efforts create heat and sweat. This works with the engineered airflow to boost all-ride comfort and the pads are washable to ensure freshness. Features:MIT In-Moulding technology assures a far better level of shock absorptionHighly breathable with fast wicking internal lining and 37 air ventsOcto fit rubberised micro dial adjuster secures fit easily and allows on the bike adjustability5mm 3D Resistex® padding - antistatic, antibacterialEco-leather chinstrap offers a plush and comfortable fitHead to pad contact reduced by 70%Passes WG11 International Safety Test and CE-EN-1078Weight: 180g (S)Buy Kask Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
Key Features:Our new Tubeless ready Trail/Enduro wheels are designed to take anything you can throw at them, but at the same time, offer a low rotational weight.,26" & 27.5" versions use the Alex Volar 2.5 tubeless ready rim, 25mm internal & 30.2mm external widths - Creates a perfect tyre profile for tyre sizes of 2.35" or larger.,29" version uses the Alex Volar 2.3 tubeless ready rim, 23mm internal & 28.4mm external widths - Creates a perfect tyre profile for tyre sizes of 2.25" or larger.,Chosen Trail hub – Front 100 x 15mm axle, 2 sealed bearings, 32h.,ACI Alpina double butted black racing spokes. Strong yet light, stainless steel spoke with brass nipples.,Q/R axle conversion kit available - Part No. SJTRQRFKIT,26” wheel 830g / 27.5” wheel 864g / 29" wheel 876g.
Key Features:Our new Tubeless ready DH wheels are designed to take anything you can throw at them, but at the same time, offer a low rotational weight.,Alex Volar 2.5 tubeless ready rim, 25mm internal & 30.2mm external widths - Creates a perfect tyre profile for tyre sizes of 2.35" or larger,Chosen DH hub – Front 110 x 20mm axle, 2 sealed bearings, 32h. asymmetric hub flanges create an even stronger wheel.,ACI Alpina double butted black racing spokes. Strong yet light, stainless steel spoke with brass nipples.,Built in the UK by our skilled wheel technicians.,26” wheel 873g / 27.5” wheel 901g..
Key Features:Our new Tubeless ready Trail/Enduro wheels are designed to take anything you can throw at them, but at the same time, offer a low rotational weight.,26" & 27.5" versions use the Alex Volar 2.5 tubeless ready rim, 25mm internal & 30.2mm external widths - Creates a perfect tyre profile for tyre sizes of 2.35" or larger.,29" version uses the Alex Volar 2.3 tubeless ready rim, 23mm internal & 28.4mm external widths - Creates a perfect tyre profile for tyre sizes of 2.25" or larger.,Chosen Trail hub – Front 100 x 15mm axle, 2 sealed bearings, 32h.,ACI Alpina double butted black racing spokes. Strong yet light, stainless steel spoke with brass nipples.,Q/R axle conversion kit available - Part No. SJTRQRFKIT,26” wheel 830g / 27.5” wheel 864g / 29" wheel 876g.