Magura MDR-C E-Bike Disc RotorProviding enhanced performance and stability, while also reducing vibrations, this disc brake rotor is specially optimised for use on electric bikes (E-bikes). The MDR-C rotor is the all-rounder in the Magura e-bike optimised portfolio, for city, trail and e-bike. An additional rigid element above the 6-hole mounting reduces vibration during braking, resulting in less noise. Heat resistance and stability have also been enhanced. Features: Material: Steel Use: Road, Mountain BIke (MTB) and Electric Bike (E-Bike) Compatibility: Compatible with all complete MT brakes Mount: 6-bolt Monoblock, optimised for electric bikes, rigid and resistant to vibrations Single or Pair: Single Weight: 162gManufacturer's Part Number: 2701918 Silver 180mm 2701919 Silver 203mm 2701917 Silver 160mmBuy Magura Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Magura MDR-P E-Bike Disc RotorOffering fantastic strength and reliability for a wide range of mountain bike (MTB) disciplines, this disc brake rotor benefits from a tough steel and alloy construction. It is also electric bike (E-bike) ready with a build that's tough enough to handle the increased speed, torque and braking force that's produced by E-bikes. Coming equipped with a range of technologies to improve performance, this is a perfect choice of upgrade for when it's time to replace your own or worn-out existing brake rotor.The MDR-P is a rotor for performance-oriented riders and tough tasks ranging from downhill to e-bikes and heavy cargo bikes. Compared to the MDR-C, the two-piece rotor saves weight and for the first time it is also available with a 220mm diameter. A special feature of the two-piece disc is the patented interlocking of the outer and inner rings (Dovetail Interlink technology). The interlocking provides additional support for the inner ring if the outer ring expands due to heat. In contrast to floating discs, the torque is transmitted over the entire surface instead of just the rivets. The result is increased rigidity of the brake disc and heat dissipation that is much more effective under continuous load. Thanks to this technology, the MDR-P is the most powerful rotor in the Magura portfolio, yet it still offers riders low weight and reduced vibration. Perfect for MTB gravity use.Magura offers a rotor with a diameter of 220mm for the first time, the MDR-P. This rotor generates around 10% more braking force than a 203mm model and 20% more than a 180mm model, for the same manual force. The higher mass also reduces the risk of brake fading and reduces brake pad wear by 15%. The temperatures that are critical for the brake pad are reached much later by the MDR-P rotor.Please note: There are multiple diameters available for this rotor. Please choose the option to match your braking setup from the menu.Features: Material: Steel/Alloy Use: Mountain Bike (MTB) and Electric Mountain Bike (E-MTB) Mount: 6-bolt Optimised for electric bikes, rigid and resistant to vibrations Single or Pair: Single Weight: 241gManufacturer's Part Number: 2701938 Silver 203mm 2701939 Silver 220mm 2701937 Silver 180mmBuy Magura Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Magura Storm 180mm 6-Bolt RotorThe Magura Storm 180mm 6-Bolt Rotor is designed for extreme use and unparalleled braking performance under high braking forces. Original Magura brake rotor for all disc brakes, especially for the Magura MT series, the Storm rotor sets new standards in terms of performance and stability at a lower weight.Features: Material: Steel Use: Mountain Bike Mount Type: 6 Bolt Weight: 148g (180mm) Buy Magura Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Magura MT4 Flatmount BrakeDeveloped for top-level braking performance, this flatmount brake boasts a compact design that's also resistant to heat and dirt. Ready for hitting the mountain bike (MTB) trails, it comes equipped with a range of performance-enhancing technologies for more controlled and dependable braking.Features: Lever Material: Carbotecture (Carbon Fibre) Lever Blade Material: Aluminium Caliper Material: Aluminium Brake Hose: 2200mm cutable Brake Lever: 2-finger flip flop design Reach Adjust: Reach adjust with Torx T25 tool Weight: 220gTechnologies: Flatmount: Flatmount brakes are characterised by integrated threads in the caliper which are fastened with M5 screws. The compact design and integrated threads simplify the mounting on the chain stay. Due to the same brake pad and pistons size of the standard 2-pistons MT brake, the Flatmount brake is just as strong as the Postmount version. Carbotecture: A mixture of high-tech polymers and carbon or glass fibers is transformed into a plastic granulate in several complex processes. During the processing from this granulate to the finished component, the carbon fibers are optimally aligned to the load requirements. With this Carboflow process any desired shape can be produced from the granulate by injection moulding. Carbotecture offers significant advantages over the classic lightweight material aluminum: Carbotecture is 50 % lighter than aluminum with identical tensile and fracture strength, so it weighs only half as much. Weight Ratio Performance: Magura brakes are characterized by their high degree of thermal resistance, achieved through optimal weight allocation. This is optimal material usage and best-in-class lightweight construction where it's really needed. magnetiXchange: Magnetic pistons fit perfectly into the brake caliper, guaranteeing quick and easy brake pad replacement. Shift Mix (optional): With help of the optional Magura's Shift Mix lever clamps Shimano (Shiftmix 1 + 2 / I-Spec I + II) and SRAM (Shiftmix 3 / X9, X0, XX) triggers can be mounted directly to the brake levers in order to accomplish a tidier cockpit. Remote Mix (optional): Magura's Remote Mix lever clamp allows the RCL² remote control of Magura forks to be mounted directly to the brake lever in order to improve ergonomics. Installation on both left and right possible. EBT: Easy Bleed Technology: Easy and fast bleeding. Please note: The brake is delivered filled and bled. The brake hose can be easily cut to the required length. Flatmount adapters as well as a disc rotor are not included in delivery. These parts are sold separately. Please pay attention to the maximum disc diameter recommended for your fork / frame.Buy Magura Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Magura MT8 SL Flatmount BrakeProviding immensely powerful and water-resistant braking performance, this flatmount brake accommodates brake discs up to 180mm (available separately). It features a high-quality carbon lever and a durable aluminium two-piston caliper for reliable braking. It is a perfect choice for cross country (XC) racing. Flatmount: Flatmount brakes are characterised by integrated threads in the caliper which are fastened with M5 screws. The compact design and integrated threads simplify the mounting on the chain stay. Due to the same brake pad and pistons size of the standard 2-pistons MT brake, the Flatmount brake is just as strong as the Postmount version. Engineered for Racing: The Carbotecture SL handle bracket and the Carbolay lever and handlebar clamp make the Magura MT8 brake an absolute lightweight for competition use. 1-Finger HC Carbolay Lever Blade: The popular 1-finger HC lever blade blade is now also available as a carbon version. The lever blade has a comfortable feel and the high-tech material combines ultra-light weight and rigidity, a clear benefit for riders. Lightweight Performance: Despite its ridiculously low weight the MT8 offers the highest braking power and stability of the 2-piston family. Uncompromising lightweight construction.Features: Lever Material: Carbotecture SL (Carbon Fibre) Lever Blade Material: Carbolay (Carbon Fibre) Caliper Material: Aluminium Brake Hose: 2200mm cutable Brake Lever: 1-finger flip flop design, reach adjustment with 3mm Allen key Brake Caliper: Forged, 2 pistons with Banjo, flatmount Weight: 185gTechnologies: Carbotecture SL: Compared to Magura's conventional Carbotecture material, a mixture of high-tech polymers and carbon or glass fibres, for Carbotecture SL medium-length carbon fibres are integrated into the polyamides instead of short ones in order to further increase resistance and reduce weight at the same time. Carbotecture SL offers significant advantages over the classic lightweight material aluminium: It is just as tensile and break-resistant with more than 50 % less weight. Weight Ratio Performance: Magura brakes are characterized by their high degree of thermal resistance, achieved through optimal weight allocation. This is optimal material usage and best-in-class lightweight construction where it's really needed. magnetiXchange: Magnetic pistons fit perfectly into the brake caliper, guaranteeing quick and easy brake pad replacement. Shift Mix (optional): With help of the optional Magura's Shift Mix lever clamps Shimano (Shiftmix 1 + 2 / I-Spec I + II) and SRAM (Shiftmix 3 / X9, X0, XX) triggers can be mounted directly to the brake levers in order to accomplish a tidier cockpit. OPD: Caliper in one-piece design. Remote Mix (optional): Magura's Remote Mix lever clamp allows the RCL² remote control of Magura forks to be mounted directly to the brake lever in order to improve ergonomics. Installation on both left and right possible. EBT: Easy Bleed Technology: Easy and fast bleeding. Please note: The brake is delivered filled and bled. The brake hose can be easily cut to the required length. Flatmount adapters as well as a disc rotor are not included in delivery. These parts are sold separately. Please pay attention to the maximum disc diameter recommended for your fork / frame.Buy Magura Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Magura MT Series MTB Disc Brake PadsReplacement pads for Magura MT series disc brakes.Features: Compatibility: MT5/MT7 or MT2/MT4 options available to select Genuine Magura disc brake pads Buy Magura Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Magura MT Series MTB Disc Brake PadsReplacement pads for Magura MT series disc brakes.Features: Compatibility: MT5/MT7 or MT2/MT4 options available to select Genuine Magura disc brake pads Buy Magura Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Magura MT8 Carbon BrakeFully equipped for the demands of today's cross country (XC) and all mountain (AM) riders, this versatile hydraulic disc brake is ready for wherever your next off-road adventure takes you. Whether you're racing or exploring for fun, its lightweight and reliable carbon build and industry-leading technologies makes it a great choice of upgrade for smooth and consistent hydraulic braking performance. Another benefit is it comes kitted out with an adjustable lever reach that allows you to fine-tune the gap between the lever blade and your handlebar for a more personalised braking feel.World champions put their trust in it! The competition-proven MT8 SL is a true lightweight that doesn't compromise on performance. Together with the lightweight Carbotecture SL brake master, the 1-finger HC carbon lever blade sets new standards in ergonomics and modulation.Developed for RacingThanks to the Carbotecture SL brake master and the 1-finger carbon HC blade, the MT 8 SL is a real lightweight. Carbotecture SL is a composite material that is not only light but also extremely resistant thanks to its embedded carbon fibres.1-Finger HC Carbon Lever BladeThe popular 1-finger HC carbon lever blade is used on the MT8 SL ex works. It's lighter and stiffer than its aluminium counterpart, enabling you to get maximum performance out of your bike.Lightweight PerformanceThe 2-piston calliper of the MT8 SL is forged from one single piece. The result? Despite its outrageously low weight, the MT8 offers the highest braking power and stability of the 2-piston family.Features: Lever Blade Material: Carbon Master Material: Carbotecture SL with Flip-Flop-Design Use: Cross Country (XC), Mountain Bike (MTB) Lever Blade Size: 1-finger EBT (Easy Bleed Technology): Yes Banjo Fitting: Yes Hydraulic: Yes Bite Adjust: No Pistons: 2 Brake Fluid: Royal Blood (mineral oil based) Reach Adjust: Yes, 3mm allen key Tubing: Magura Disctube Recommended Rotor: Storm SL.2 (sold separately) Reach Adjust: Yes, 3mm allen key Designed and Made in Germany Weight: 195gBuy Magura Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Magura MDR-C E-Bike Disc RotorProviding enhanced performance and stability, while also reducing vibrations, this disc brake rotor is specially optimised for use on electric bikes (E-bikes). The MDR-C rotor is the all-rounder in the Magura e-bike optimised portfolio, for city, trail and e-bike. An additional rigid element above the 6-hole mounting reduces vibration during braking, resulting in less noise. Heat resistance and stability have also been enhanced. Features: Material: Steel Use: Road, Mountain BIke (MTB) and Electric Bike (E-Bike) Compatibility: Compatible with all complete MT brakes Mount: 6-bolt Monoblock, optimised for electric bikes, rigid and resistant to vibrations Single or Pair: Single Weight: 162gManufacturer's Part Number: 2701918 Silver 180mm 2701919 Silver 203mm 2701917 Silver 160mmBuy Magura Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Magura MT4 Disc BrakeThe versatile Magura MT4 Disc Brake is perfectly tailored for mountain bike (MTB) use as it provides outstanding braking power and modulation as you weave between the trails. Keeping you in full control. this brilliant component features a rock-solid aluminium lever construction. This makes it more than capable of handling all the abuse from trail-side obstacles and debris as you blast across the woodland. Engineered for outstanding stability and modulation, this superb model is also equipped with a master cylinder which is made of lightweight and durable carbotecture composite material. This provides excellent longevity and stopping actuation as you dive into corners and attack steep descents with power and poise.Adjustable Mountain Bike Disc BrakeDesigned for ease of use, this sleek version is equipped with an adjustable lever reach via a tooled Torx screw. This means you can easily fine-tune the distance between the lever and your handlebars for a more customised feel. As a result, you'll be able to benefit from a more reliable hold from a component which matches your hand-size, riding style and the terrain conditions.Features: Lever Material: Aluminium Master Cylinder Material: Carbotecture Use: MTB, Trekking Caliper Mount: 180mm Post Mount Lever Size: 2-finger Piston: 2-piston Adjustment: Tooled Reach adjust Brake Fluid: Royal Blood (mineral oil based) Brake rotor not included Weight: 230g (approx.)Buy Magura Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Magura MT4 Disc BrakeThe versatile Magura MT4 Disc Brake is perfectly tailored for mountain bike (MTB) use as it provides outstanding braking power and modulation as you weave between the trails. Keeping you in full control. this brilliant component features a rock-solid aluminium lever construction. This makes it more than capable of handling all the abuse from trail-side obstacles and debris as you blast across the woodland. Engineered for outstanding stability and modulation, this superb model is also equipped with a master cylinder which is made of lightweight and durable carbotecture composite material. This provides excellent longevity and stopping actuation as you dive into corners and attack steep descents with power and poise.Adjustable Mountain Bike Disc BrakeDesigned for ease of use, this sleek version is equipped with an adjustable lever reach via a tooled Torx screw. This means you can easily fine-tune the distance between the lever and your handlebars for a more customised feel. As a result, you'll be able to benefit from a more reliable hold from a component which matches your hand-size, riding style and the terrain conditions.Features: Lever Material: Aluminium Master Cylinder Material: Carbotecture Use: MTB, Trekking Caliper Mount: 180mm Post Mount Lever Size: 2-finger Piston: 2-piston Adjustment: Tooled Reach adjust Brake Fluid: Royal Blood (mineral oil based) Brake rotor not included Weight: 230g (approx.)Buy Magura Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Magura MT4 Disc BrakeThe versatile Magura MT4 Disc Brake is perfectly tailored for mountain bike (MTB) use as it provides outstanding braking power and modulation as you weave between the trails. Keeping you in full control. this brilliant component features a rock-solid aluminium lever construction. This makes it more than capable of handling all the abuse from trail-side obstacles and debris as you blast across the woodland. Engineered for outstanding stability and modulation, this superb model is also equipped with a master cylinder which is made of lightweight and durable carbotecture composite material. This provides excellent longevity and stopping actuation as you dive into corners and attack steep descents with power and poise.Adjustable Mountain Bike Disc BrakeDesigned for ease of use, this sleek version is equipped with an adjustable lever reach via a tooled Torx screw. This means you can easily fine-tune the distance between the lever and your handlebars for a more customised feel. As a result, you'll be able to benefit from a more reliable hold from a component which matches your hand-size, riding style and the terrain conditions.Features: Lever Material: Aluminium Master Cylinder Material: Carbotecture Use: MTB, Trekking Caliper Mount: 180mm Post Mount Lever Size: 2-finger Piston: 2-piston Adjustment: Tooled Reach adjust Brake Fluid: Royal Blood (mineral oil based) Brake rotor not included Weight: 230g (approx.)Buy Magura Components from Chain Reaction Cycles, the World's Largest Online Bike Store.