The most Extravagant Wheel options we could create are now available as an instant custom! This wheel consists of a Profile Z Coaster Male rear hub with optional Titanium axle upgrade & 9t Titanium Driver upgrade. Laced onto a G-Sport Ribcage rim using Rainbow Titanium Source BMX spokes with Brass nipples. The Titanium Driver/Axle options will need to be Added to your basket as this will affect your total price. The Weight saving on this wheel when using all of the Titanium spokes & hub upgrades works out roughly 220grams / 7.7oz lighter than standard chromoly. ###section### Product Specs WHEEL SIZE:20" HUB:Profile Zcoaster Freecoaster Hub AXLE:14mm Male DRIVE SIDE:Left Side Drive RIM:G-Sport Ribcage Rim SPOKES:Titanium Raindow NIPPLES:Brass WEIGHT:1167g / 41.16oz
Campagnolo Record EPS 11sp Rear DerailleurAs with the mechanical parts, the rear derailleur represents the pride and joy of the EPS project and encompasses a series of technologies and innovations that allow shifting speed to be optimised and guarantee unprecedented precision, even in the case of multiple shifting with 11 sprockets at a time.The EPS rear derailleur is comprised mainly of a mechanical structure, derived from the mechanical gear and composed of a derailleur rod/parallelogram/derailleur cage, of a worm screw enabled by an electronic actuator. As with the derailleur, the electronic rear derailleur actuator is composed of a gear motor and a sensor, the built-in resolver, that reads its movements. The geometry of the parallelogram has been made more rigid and optimised to promote interaction with the electronic parts. The lower and upper bodies, the parallelogram and the carbon derailleur cage are moved by a screw system and lead worm screw (not a spring screw) which, in turn, is enabled by the electronic actuator that communicates with the DTI. The built-in resolver inside the actuator is capable of reading the movements of the rear derailleur at any time and optimising its position by communicating with the DTI (Digital Tech Intelligence). The rear derailleur is also equipped with a play recovery system using a helicoidal spring that optimises stability and precision and keeps operation and performance constant over time, even after many kms have been covered. As with the mechanical rear derailleur, it is possible to optimise its position with respect to the frame and chain by acting on two adjusting screws: the screw that adjusts the mechanical end stop and the screw that adjusts the distance between the upper pulley and sprockets. By using these screws it is possible to optimise the installation of the rear derailleur and increase the precision of its operation.DTI: Digital Tech Intelligence is housed inside the Power Unit and it continuously monitors the signals that arrive from all the EPS components, thus managing their operation.Multi-Shifting: There are no longer any limits to Multi-shifting and the choice is at the fingertips of the cyclist.Ride Back Home: The uncoupling mechanism of the rear derailleur is useful if the battery runs out "on the road", allowing you to manually "uncouple" the rear derailleur to position it on which ever sprocket you require.Water Proof: In order to achieve the IP67 classification, all the electronic components of the EPS system underwent a series of tests, which proved their ability to function perfectly under one meter of water for at least 30 minutes.WARNING - All connection, installation, removal and adjustment operations of the EPS drivetrain must only be carried out by a Campagnolo Service Center, a Campagnolo Pro Shopor a mechanic specializing in the installation of EPS systems. Any Tampering with or incorrect or incomplete installation of any part of the EPS system will automatically void the warranty.NOTE FOR SPECIALISED MECHANICS - Please remember that all assembly, disassembly, adjustment and maintenance procedures for the EPS drivetrain are described in the EPS technical manual, which is available in PDF format on their internet site www.campagnolo.com.Buy Campagnolo Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Roll on the past or relive your childhood on the GT Heritage. Inspired by GT’s Freestyle roots loaded with the details to make this vintage inspired bikes as legendary as their predecessors. ###section### Product Specs FRAME MATERIAL: 6061-T6 Aluminium WHEEL SIZE: 29" TOP TUBE LENGTH: 23.5" CHAIN STAY LENGTH: 17.4" HEADTUBE ANGLE: 71° SEAT TUBE ANGLE: 72° FORKS: 100% Cro-Mo 2pc. Threaded Steerer & Tapered Legs, 3/8”Axle Dropouts BARS: GT Pro Performer Cruise Control 2pc. 100% Cr-Mo, 7.875"H x 31.5"W, 5°Up, 9° Back STEM: GT Front Load, 1-1/8”, Cold Forged Cap, 10mm Rise, 40mm HEADSET: 1 1/8” Integrated Design, 45X45 Degree Sealed Bearings BRAKE MOUNTS: Disk BRAKES: Promax Mech Disc, 160mm Rotors FRONT HUB: Alloy Body, Sealed Bearings, 36h, 3/8” x 17mm Female Bolt FRONT RIM: Alloy Double Wall, 36h REAR HUB: Alloy Thread-on Disc Body, Sealed Bearings, Cr-Mo 3/8” Slotted 14mm Axle, 36h, 17mm Nut REAR RIM: Alloy Double Wall, 36h TYRES: GT Smoothie 29 x 2.5" SPROCKET: GT 25T Steel Chainwheel CRANKS: GT Power Series Seamless Tubular Cr-Mo 3pc., 170mm Arms BB: Sealed Mid PEDALS: GT Low Profile FS Platform Design SEAT: GT Cheat Code Railed GEARING: 25/9 WEIGHT: TBC ###section### Product Highlights Larger Wheels for that road bike performance with a BMX feel Larger wheels allow for a more comfortable ride without sacrificing too much of that BMX feel Lightweight build Sealed bearings throughout Strong and durable crankset ###shogun-image-section###
Stages Power Right for Shimano Dura-Ace 9100 or Ultegra R8000 is a right side only power meter that will transform new and existing Gen 2 Stages Power meters into a dual-sided power option.Specifications:Accuracy: ± 1.5%,Weight: Only less than 15gr to base crank arm,Battery Life: 200+ hours (coin cell: CR2032),Power range (Watts): 0 - 2500,Cadence range (rpm): 20 - 220,Water resistance rating: IPX7,Frame Compatibility: Most frames, see fit guide in our Support section,Chainring Compatibility: 53 x39, 52x36, 50x34,Device Compatibility: ANT+, Bluetooth Smart Ready,Software Compatibiity: Stages Link, Today's Plan, Training Peaks, Strava, Garmin Training Center and others,Tool free battery replacement,Active temperature compensation,Accelerometer based cadence measurement,Wireless firmware upgrades.
The Aqua Marina Hyper Touring SUP 11’6” Paddle Board Package, is as the title suggests, an ideal all-round SUP paddle board kit that includes everything you need for touring, exploring, and discovering. The Hyper Touring paddle board itself has been made with a double-wall fabric drop stitch core, light and printed tarpaulin layer, and extra rail-band reinforcement for optimum durability and stability. A comfortable diamond grooving footpad also supplies extra grip, while the aerodynamic rail edge design creates a clean water release and highly improved paddling efficiency. Additionally, a neoprene carry handle makes light work of carrying it to and from the water, and a rubber patched valve ensures optimum airtightness, especially in harsh conditions, so you do not deflate when out exploring. Plus, an integrated bungee system means you can keep your essentials nearby. To finish the package, you can rely on a Double Action Liquid AIR V1 Pump for quick and easy inflating, alongside a removable slide-in Racing Fin and coil leash to ensure fuss-free water touring. Furthermore, all the kit fits into a zipped backpack, making this paddle board set easily portable for adventuring home and away. About Double Chamber Technology This added chamber offers up to 48 litres of safety floatation for the inflatable board used in open water and long trip touring.
The new single-sided Stages Power L meter is built on to a non-drive-side Shimano Dura-Ace R9200 crank arm and is compatible with all Shimano Hollowtech II road drivetrains.
Stages Cycling Power Meter L Dura-Ace R9200Featuring a Shimano Dura-Ace R9200 crankarm (left arm only) and a Stages Cycling (non-drive side left) power meter, this model is specifically developed to give you world-class training on your road bike. Compatible with all frames that fit Shimano Hollowtech II cranks, this model offers +/- 1,5% accuracy in all conditions, so you can enjoy precise data measurement. It is also both ANT+ and Bluetooth Smart ready for seamless integration with your wireless smart device, making it easy to run Stages Link, Training Peaks, Strava, Garmin Training Center and others. Powered by a high-quality CR2032 coin cell battery, it provides up to 200+ hours of battery life and comes with a range of ride-enhancing technologies, so you can get the most out of every training session. Whether you're training for an event or trying to beat your own personal best, this power meter is engineered for performance.Tour ProvenStages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world's best product proving ground, then Stages Power is proven as the world's best power meter.Active Temperature Compensation as Standard EquipmentConsistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. Active Temperature Compensation (ATC) is the key reason a rider can trust data from Stages Power in all conditions.Individual Meter Calibration for the Most Accurate ResultsEach Stages Power meter is calibrated individually to ensure a +/- 1,5% accuracy level, which is the industry best for non-scientific power meters. Individual calibration means that you can trust the data produced by the Stages Cycling system, as it's a real measurement and not an estimation.Technologies: Power Meter Housing: Low profile design, with robust door interface. Tool-free battery replacement on the left arm and Phillips head screw access on the drive side. Battery Life: 200+ hours (Coin Cell: CR2032). Active temperature compensation. Accelerometer-based cadence measurement or the option to use a Hall-Effect-based system with a magnet (coming soon). Wirelessly upgradeable firmware. LED indicator for visual indication of battery levels and zero-reset confirmation without connected app or head unit. Updated accelerometer and addition of gyroscope for improved cadence resolution. Upgraded BLE and ANT+ radios offer a 6x improvement of data transmission strength.In The Box: Stages Power L: Non-drive-side power meter, High quality CR2032 coin cell battery. Lifetime access to Stages Link for power meter management and firmware upgrade. 2 months free access to Stages Link premium training and coaching features. Product Identification Card with Serial Number and ANT+ ID Number. User Guide.Manufacturer's Part Numbers: STD92LZ Black 160mm STD92LA Black 165mm STD92LC Black 170mm STD92LD Black 172.5mm STD92LE Black 175mmBuy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Developed to give you world-class training on your road bike, this power meter features a Shimano Dura-Ace R9200 crankarm (left arm only) and a Stages Cycling (non-drive side left) power meter. Compatible with all frames that fit Shimano Hollowtech II cranks, this model offers +/- 1,5% accuracy in all conditions, so you can enjoy precise data measurement. It is also both ANT+ and Bluetooth Smart ready for seamless integration with your wireless smart device, making it easy to run Stages Link, Training Peaks, Strava, Garmin Training Center and others. Powered by a high-quality CR2032 coin cell battery, it provides up to 200+ hours of battery life and comes with a range of ride-enhancing technologies, so you can get the most out of every training session. Whether you're training for an event or trying to beat your own personal best, this power meter is engineered for performance. Tour Proven Stages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world’s best product proving ground, then Stages Power is proven as the world’s best power meter. Active Temperature Compensation as Standard Equipment Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. Active Temperature Compensation (ATC) is the key reason a rider can trust data from Stages Power in all conditions. Individual Meter Calibration for the Most Accurate Results Each Stages Power meter is calibrated individually to ensure a +/- 1,5% accuracy level, which is the industry best for non-scientific power meters. Individual calibration means that you can trust the data produced by the Stages Cycling system, as it's a real measurement and not an estimation. Technologies: - Power Meter Housing: Low profile design, with robust door interface. Tool-free battery replacement on the left arm and Phillips head screw access on the drive side. - Battery Life: 200+ hours (Coin Cell: CR2032). - Active temperature compensation. - Accelerometer-based cadence measurement or the option to use a Hall-Effect-based system with a magnet (coming soon). - Wirelessly upgradeable firmware. - LED indicator for visual indication of battery levels and zero-reset confirmation without connected app or head unit. - Updated accelerometer and addition of gyroscope for improved cadence resolution. - Upgraded BLE and ANT+ radios offer a 6x improvement of data transmission strength. In The Box - Stages Power L: Non-drive-side power meter, High quality CR2032 coin cell battery. - Lifetime access to Stages Link for power meter management and firmware upgrade. - 2 months free access to Stages Link premium training and coaching features. - Product Identification Card with Serial Number and ANT+ ID Number. - User Guide. Manufacturer's Part Numbers: STD92LZ Black 160mm STD92LA Black 165mm STD92LC Black 170mm STD92LD Black 172.5mm STD92LE Black 175mm
Fox Suspension 36 Float Performance Boost ForkAn ideal addition to your mountain bike's (MTB's) front end for taking on the toughest enduro trails in the World, the 36 Float Performance fork will soak up the biggest drops and hits as you dominate on all types of terrain.This high-quality mountain bike (MTB) suspension fork is trail-ready with anodised upper tubes for hard-wearing performance and durability wherever your next ride takes you. Engineered for everything from day long epics on your favourite trails, it's kitted out with Boost axle spacing for extra stiffness as you dominate your way around the mountain. Another highlight is its lightweight Float air spring and GRIP damper for excellent tuneability and control. As a result, it's easy to dial in your settings to match your riding style as well as the terrain. Equipped with some of Fox's finest technologies, this suspension fork is a great choice of upgrade for singletrack trail riding, bike park routes and enduro racing.Inspired from moto, the GRIP damper uses Fox Suspension's FIT sealed cartridge technology combined with a coil-sprung, independent floating piston. GRIP allows excess oil to purge through specially designed ports at the top of the damper to maintain consistent damping and increase durability.E-MTB Compatible Suspension ForkCompatible electric mountain bikes (E-MTB), this suspension fork is built to perform everywhere from big backcountry routes to the EWS circuit. No stranger to winning awards, accolades and Enduro World Series (EWS) races, it features a new design inside-and-out and it's part of Fox Suspension's Performance Series which includes an anodised finish on its upper tubes for extra protection against wear and corrosion. It's also equipped with Boost axle spacing for additional stiffness, making it ideal for modern enduro riding. Coming complete with a Float EVOL air spring and a GRIP damper with three-position on-the-fly adjustability, this E-bike-ready fork provides a wide range of customisation, so you can benefit from a more rider-tuned feel.Fox Suspension GRIP DamperFox Suspension's GRIP damper is the benchmark for unparalleled ride quality and convenient 3-position adjustability. GRIP includes the brand's Open/Medium/Firm external fine-tuning dial, so you can customise ride performance on-the-fly. The GRIP damper achieves with the twist of a knob when typically, this level of adjustability would require the time-consuming and complicated task of completely disassembling and reassembling the fork.Float Air SpringEVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL’s linear spring curve delivers plushness off the top, extra mid-stroke support, and more tunable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's updated Lower Leg channels, which functions to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference.Features: Upper Tube Finish: Black Anodized Intended Use: Trail Air Spring: FLOAT EVOL Damper: GRIP (Open/Medium/Firm) Travel: 160mm Wheel Size: 27.5" Axle: 15QR x 110mm Boost Steerer: 1.1.8" to 1.5" Tapered Offset: 44mm Air Channels: Yes Bleeders: Yes Floating Axle: Yes, Kabolt X Axle 15QR x 110mm Boost Rotor Size: 180mm direct Post Mount, Up to 230mm compatible Mud Guard Mount: Optional FOX 36/38 Mud Guard with sturdy 4-point direct-mount attachment (Sold separately)Technologies: Performance Series: Performance Series forks retain the same black anodized 7000 series aluminium upper tubes as Performance Elite, except paired with a GRIP damper. Push-button bleeders are not included but can be purchased separately Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional micro-adjust between settings Detents. Low-speed rebound 10 clicks Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your ride Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modelling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material Increased crown diameter to match modern frame shape profiles Optional mudguard with sturdy 4-point direct-mount attachment protects upper tubes and dust wipers from dirt and debris. (Available separately)Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Using TeXtreme Spread Tow carbon fibre reinforcements in the shell, the TLD D4 Carbon Freedom helmet has helped reduce down the weight of the full face helmet by almost 50 grams without sacrificing any strength. Despite the loss in weight, Troy Lee were able to strategically add EPS (expanded polystyrene) to increase strength and durability. The integrated MIPS (multi-directional impact protection system) brain protection system is designed to reduce rotational motion transferred to the brain from angled impacts to the head. The D4 package is rounded out with lightweight titanium D-rings, collarbone suspension system and quick release XT2 3D cheek pads and X-Static washable liner. Size Guide: X-Small: 20.8" - 21.2" (53cm - 54cm) Small: 21.6" - 22" (55cm - 56cm) Medium: 22.4" - 22.8" (57cm - 58cm) Large: 22.8" - 23.2" (58cm - 59cm) X-Large: 23.6" - 24" (60cm - 61cm) XX-Large: 24.4" - 24.8" (62cm - 63cm)
Using TeXtreme Spread Tow carbon fibre reinforcements in the shell, the TLD D4 Carbon Freedom helmet has helped reduce down the weight of the full face helmet by almost 50 grams without sacrificing any strength. Despite the loss in weight, Troy Lee were able to strategically add EPS (expanded polystyrene) to increase strength and durability. The integrated MIPS (multi-directional impact protection system) brain protection system is designed to reduce rotational motion transferred to the brain from angled impacts to the head. The D4 package is rounded out with lightweight titanium D-rings, collarbone suspension system and quick release XT2 3D cheek pads and X-Static washable liner. Size Guide: X-Small: 20.8" - 21.2" (53cm - 54cm) Small: 21.6" - 22" (55cm - 56cm) Medium: 22.4" - 22.8" (57cm - 58cm) Large: 22.8" - 23.2" (58cm - 59cm) X-Large: 23.6" - 24" (60cm - 61cm) XX-Large: 24.4" - 24.8" (62cm - 63cm)
Inspired by the past for the movement of today. The Pro Series line is purpose-built with the input of our Bike Life Coalition to hold up to any session with your squad. Hone your skills as you raise it up in the street and become the king of your neighborhood.Key Features:Slotted 14mm Axle Disc Freewheel Hub,14mm Peg sized G-1 Chain Tensioners to keep your wheel tight ,Light weight 14mm knurled alloy pegs.