For the Message frame Wethepeople wanted to expand their current frame line and offer a full aftermarket alternative for riders that need a strong, yet lightweight technical park setup built to last. The Message frame boasts a low standover height at 8", and fast geometry make it perfect for the technical ramp rider. The back end features wider rear triangle allows clearance for a 2.50" tyre. ###section### Product Specs MATERIAL: Full 4130 Chromoly HEAD TUBE ANGLE: 75.5° SEAT TUBE ANGLE: 71° CHAIN STAY LENGTH: 12.95" BB HEIGHT: 11.5" WHEEL SIZE: 20" STANDOVER HEIGHT: 8" DROPOUT SIZE: 14mm HEADSET TYPE: Integrated BB TYPE: Mid BRAKE MOUNTS: Removable GYRO TABS: Removable WEIGHT: 5.32lbs ###section### Product Highlights Responsive Geometry with Short Backend and Steep Headtube Great for all riding but excels at Park riding High-quality Chromoly construction Wide rear end for extra tire clearance Removable brake hardware (Brake hardware not included) ###shogun-image-section###
Park forks from Wethepeople. The Wethepeople Message forks are made from full liquid post heat treatment M2 4130 chromoly and feature CNCd steerer with built in bearing race, 5mm CNCd and laser cut dropouts and come complete with a high quality 7075-T6 alloy top cap.###section### Product Specs Steerer Length: 170mm Wheel Size: 20" Material: 4130 Chromoly Dropout Size: 10mm Offset: 28mm Weight: 1006g / 2.22lbs ###section###
The park riders on the WeThePeople team were calling out for a lightweight peg which could hold up to years of abuse in the skatepark, and shave some weight over traditional steel pegs. The Message Peg is cold forged from super tough 7075-T6 alloy and then CNC machined internally and externally to remove material where it's not needed. Sold as a pair, drilled for 14mm axles but comes with x2 3/8 adaptors to fit female bolt rear hubs. Please note: The Wethepeople Message Pegs are sold as a pair. ###section### Product Specs LENGTH: 4.125" (105mm) DIAMETER: 34mm MATERIAL: Metal AXLE SIZE: 14mm with 3/8" adaptor PACK SIZE: 2 (Pair) WEIGHT: 326g (11.5oz)
The wethepeople "Message" Gyro Plate is made from aluminum and works with 1-1/8" steer tubes.
Brake hardware kit to fit the Wethepeople message frame. includes thread-on brake pivots, and removable gyro tabs and angled cable guides. Allows you to easily install your brakes onto your message frame in a matter of seconds. Fits all wethepeople message aftermarket frames.
THE NEW EPB SYSTEM.The low cost solution. VP’s new EPB (economic polymer bearing) System replaces loose ball bearings with specially engineered polymer bearings. This system allows VP to create a more simple, thinner, and lighter pedal for entry level applications. VP pioneered the use of polymer bearings many years ago and now the same proven high-end technology is available as a cost-reducing OEM solution. VP EPB Advantages:Reduced cost due to all in-house production and automatic assembly,Reduced weight,Thinner bodies,Fewer moving parts,Adjustable bearing pre-load,Easily serviced . Material PP resin ,Cage aluminium ,Axle 7mm boron steel,EPB System ,Size 103mm x 64.5mm ,Weight 235g per pair .
The Voyager XL frame features the same tech feel of the Voyager V2, but with a little extra length. It has a steeper 75.25° heat tube, Longer 13” slammed chainstay (13.25” center to center) and a higher 9.25” seat tube height. This frame also features double butted 4130 heat treated chromoly tubing, hour glass head tube, and small/clean 6mm thick laser cut and welded dropouts with built in chain tensioner. Added top and bottom gussets for strength, removable brake mounts, and S chainstays for bigger tyre clearance. ###section### Product Specs MATERIAL: 100% 4130 CrMo HEAD TUBE ANGLE: 75.25° SEAT TUBE ANGLE: 71° CHAIN STAY LENGTH: 13.25" BB HEIGHT: 11.7" WHEEL SIZE: 20" STANDOVER HEIGHT: 9.25" DROPOUT SIZE: 14mm HEADSET TYPE: Intergrated BB TYPE: Mid BRAKE MOUNTS: Removable (Sold separately) GYRO TABS: Removable (Sold separately) WEIGHT: TBC ###section### Product Highlights Responsive Geometry with Short Backend and Steep Headtube Great all round frame for all types of riding High-quality Chromoly construction Strong S-bend chainstays with room for 2.40” tires Strong and durable investment cast dropouts ###shogun-image-section###
The Voyager V2 frame features specs that the Volume team riders have been asking for; steeper 75.25° head tube, shorter 12.5” slammed chainstay (12.75” center to center) and a higher 9.25” seat tube height. This frame features double butted 4130 heat treated chromoly tubing, hour glass head tube, and small/clean 6mm thick laser cut and welded dropouts with built in chain tensioner. Added top and bottom gussets for strength, removable brake mounts, and S chainstays for bigger tyre clearance. ###section### Product Specs MATERIAL: 100% 4130 CrMo HEAD TUBE ANGLE: 75.25° SEAT TUBE ANGLE: 71° CHAIN STAY LENGTH: 12.75" BB HEIGHT: 11.7" WHEEL SIZE: 20" STANDOVER HEIGHT: 9.25" DROPOUT SIZE: 14mm HEADSET TYPE: Intergrated BB TYPE: Mid BRAKE MOUNTS: Removable (Sold separately) GYRO TABS: Removable (Sold separately) WEIGHT: TBC ###section### Product Highlights Responsive Geometry with Short Backend and Steep Headtube Great all round frame for all types of riding High-quality Chromoly construction Strong S-bend chainstays with room for 2.40” tires Strong and durable investment cast dropouts ###shogun-image-section###
Volume Voyager Forks. Made from 4130 heat-treated chromoly with a one piece steer tube and 6mm thick investment casted dropout. Comes in a 28mm offset, good for all around riding. .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; } ###section### Product Specs Steerer Length: 163mm Wheel Size: 20" Material: Chromoly Dropout Size: 14mm Offset: 28mm Weight: 34.8 oz
The Voyager bar is made from all thicker 13 butted 4130 CRMO heat treated tubing that was designed with all the butting in all the stress points of the bar. Also features a widened box and raised cross bar for added strength. ###section### Product Specs Rise: Multiple Options Width: 29" Up Sweep: 2° Backsweep: 12° Bar Clamping Diameter: 22.2mm Bar Type: 2pc Weight: 33.2 oz ###section### ###shogun-image-section###
Vitus Vitesse EVO Ultegra Di2 Road BikeBuilt and equipped to make you thrive on your local sportive or professional road race, this UCI approved Vitesse Evo boasts a full carbon frame and fork plus a full Shimano Ultegra Di2 12 speed groupset. With this agile and quick-accelerating ride underneath you, you won’t need to make excuses, as you’ll be winning. It's sharp on the climbs, but also agile on descents and capable of holding speed on the flat. To be a great all-round road bike, to win a Grand Tour even, it has to perform everywhere.The Vitesse has been on a redesign journey, and this updated EVO features Vitus' latest one-piece carbon frame. Not only does it look clean (and fast!), the seamless design has no joins and there is no extra material being used to bond the frame together, keeping weight down. So you will still get the goosebumps of excitement when you feel it for the first time. “Phwoar! That's light”. Plus, when you start rolling, you'll realise that there is so much more going on here to benefit your riding.The geometry is optimised, giving you control through turns whilst also being responsive to bursts of acceleration or steeper ramps. Stiffness is engineered into the frame where you need it most, so precious energy won't be wasted - something we all need on those long, hilly days. And the modern frame clearance enables space for a bigger volume tyre as well, smoothing out those real world road surfaces. The Vitesse EVO is a masterful climber. When you dream of dancing on the pedals, floating up legendary climbs and scorching personal bests, this is the bike you do it on. Then, when you roll over the top and hit the descent, there's no teetering. No indecision, just pure control. This bike lets you relax and carve the perfect line.Key Features:Race-Fit geometry SL UD Carbon aero frame and fork with integrated seat clamp Shimano Ultegra R8100 Di2 groupset Reynolds AR29 DB Carbon wheelset Michelin Power Road 700x25c tubeless ready tyres Lightweight Prime finishing kit Features: Frame: Vitesse EVO Carbon, SL UD Carbon, UCI Approved, Internal Cable Routing, 12mm x 142mm Hub Spacing, Flat Mount, Axle Specifications: 172mm Length, 14mm Thread Length, M12xP1.5 Thread Pitch Fork: Vitesse EVO Carbon, SL UD Carbon, UCI Approved, Tapered Steerer, 100 x 12mm, Flat Mount, Size Specific Offset Headset: ACROS Aix-Low R3, Sealed Bearings, OD46, 1 1/8” - 1 ½”, 41.8 / 28.6 - 52 / 40 Handlebar: Prime Primavera Carbon Aero, UD Carbon, Rise: 78mm, XS:380mm S:400mm M:420mm L:420mm XL:440mm XXL:440mm Stem: Prime Doyenne Lightweight Aluminium, Bar Bore 31.8mm, +/- 5 degrees, XS:90mm S:100mm M:110mm L:110mm XL:120mm XXL:120mm Grip(Tape): Vitus Super Grip, Anti Slip Wheelset: Reynolds AR46 DB Carbon Carbon Clincher Wheelset, 100 x 12mm Front, 142 x 12mm Rear, Centre Lock, XD-R Freehub Front Rim: Reynolds AR46, Carbon, TubelessReady, Disc Brake, 20 Hole, Rim Depth: 46mm, Inner Rim Width: 19mm, Outer Rim Width: 28mm Rear Rim: Reynolds AR46, Carbon, TubelessReady, Disc Brake, 24 Hole, Rim Depth: 46mm, Inner Rim Width: 19mm, Outer Rim Width: 28mm Front Hub: Reynolds GW TR3, 100 x 12mm, Centre Lock Rear Hub: Reynolds GW TR3, 142 x 12mm, Centre Lock, HG Freehub Front Tyre: Michelin Power Cup Classic TS TLR, 700c x 25c, Tubeless Ready Rear Tyre: Michelin Power Cup Classic TS TLR, 700c x 25c, Tubeless Ready Chain: Shimano M8100 Crankset: Shimano Ultegra R8100 FC-R8100, 52/36T, XS:165mm S:170mm M:172.5mm L:172.5mm XL:175mm XXL: 175mm Bottom Bracket: TRiPEAK 386-24 for BB386EVO Front Brake: Shimano Ultegra R8170 Disc Rear Brake: Shimano Ultegra R8170 Disc Rotors: Shimano MT800, Front:160mm, Rear:140mm Front Derailleur: Shimano Ultegra R8150, 2x12 Speed, Braze-On Rear Derailleur: Shimano Ultegra R8150, 12 Speed, Short Cage Left Shifter: Shimano Ultegra R8170, 2x12 Speed Right Shifter: Shimano Ultegra R8170, 12 Speed Freewheel: Shimano Ultegra R8100, 12 Speed Saddle: Vitus Race Performance, CRN-Ti Rail, Pressure Relief Channel Seat Post: Prime Primavera Carbon, 27.2mm, 10mm Offset, XS/S: 300mm M/L: 350mm XL/XXL: 400mm Seat Screw: Vitesse EVO Integrated, Internal Wedge System Weight: Medium: 7.7kgTechnologies:Full Monocoque Frame: A true one piece monocoque frame manufactured as a single piece of super light UD carbon. No joins, so greater strength and lighter weightRace-Fit Geometry: Race-Fit geometry is reserved for Vitus' performance led race bikes. The aim is to put the rider in the most advantageous position possible, maximising power output and aerodynamic positioning, whilst maintaining comfortDual Fork Design: Frame size specific fork geometry maintaining fit and handling characteristics across the full size curve.Improved Tyre Clearance: The new Vitesse EVO frame now has 30c tyre clearance across all frame sizes and even up to 32c depending on the rim/tyre combination.Easy AssemblyWhen you order a bike, one of our trained mechanics will carefully prepare and pack your bike for shipping. Upon delivery, the assembly is simple and all necessary tools and plastic pedals are conveniently included in the box.Depending on the delivery service and destination, bikes will either be delivered in a large or a small box. Below is a guide as to how your bike will arrive: All bikes for delivery within the UK and Republic of Ireland will be delivered in a large box, except for balance bikes and BMX bikes, which are always delivered in manufacturer’s boxes. All bikes for delivery within the EU on a standard service will be delivered in a large box. If an express delivery option is chosen, your bike will be packed into a small box. Again, the exception is balance bikes and BMX bikes, which are always delivered in manufacturer’s boxes. All bikes for worldwide delivery outside the EU will be delivered in small boxes.This video demonstrates assembly from a SMALL BOX.This video demonstrates assembly from a LARGE BOX.Please note that due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.Buy Vitus Bikes from Chain Reaction Cycles, the World's Largest Online Bike Store.