The Ultegra R800 Stages Power meter fits all styles of R800 crankset, including: compact and standard. Riders looking to add power to their existing crank need only to match the crank length of their existing Ultegra R800 crankSPECIFICATIONS:Stages Power L Accuracy: ± 1.5% (compared with Generation 2 Accuracy: ± 2%),Weight: Only adds 20gr to base crank arm,Battery Life: 200+ hours (coin cell: CR2032),Power range (Watts): 0 to 2500,Cadence range (rpm): 20-220,Frame Compatibility: Most frames, see fit guide in our Support section,Crank Compatibility: All Shimano Hollowtech II road cranks,Device Compatibility: ANT+, Bluetooth Smart Ready,Software Compatibiity: Training Peaks, Strava, Garmin Training Center and others.ADDITIONAL FEATURES:Tool free battery replacement,Active temperature compensation,Accelerometer based cadence measurement,Wireless firmware upgrades.
The new single-sided Stages Power L meter is built on to a non-drive-side Shimano Dura-Ace R9200 crank arm and is compatible with all Shimano Hollowtech II road drivetrains.
Stages Power LR for Shimano Ultegra R8000 is a dual-sided power meter for those who desire bilateral measurement.SPECIFICATIONS:Accuracy: ± 1.5%,Weight: Only less than 35gr to base crank arm,Battery Life: 200+ hours (coin cell: CR2032),Power range (Watts): 0 - 2500,Cadence range (rpm): 20 - 220,Water resistance rating: IPX7,Frame Compatibility: Most frames, see fit guide in our Support section,Device Compatibility: ANT+, Bluetooth Smart Ready,Software Compatibiity: Stages Link, Today's Plan, Training Peaks, Strava, Garmin Training Center and others.ADDITIONAL FEATURES:Tool free battery replacement,Active temperature compensation,Accelerometer based cadence measurement,Wireless firmware upgrades.
The Stages SB20 Smart Bike Handlebar Tape is a textured urethane bar tape which provides padding and grip for your indoor trainer’s bars. Long-lasting material resists wear and saturation from sweat. Includes two rolls for use with standard road bars. End plugs included.Key FeaturesUrethane bar tape,Long-lasting material,Includes two rolls,End plugs included.
The Stages Power L meter is built to the proprietary Stages Power carbon left crank arm. The full carbon fiber Stages Power meter and crank arm is compatible with many SRAM GXP or BB30 cranks.The new Stages Power meter is slimmer, and up to 28-percent lower profile than our original meter. It's sleeker by way of a 17-percent reduction in frontal area, and we've also made it stronger. The new housing design increases the strength of the battery door and housing connection by 200-percent over the previous design.Specifications:Stages Power L Accuracy: ± 1.5% (Compared with Generation 2 Accuracy: ± 2%),Power Meter Housing: New low profile design, with new door interface,Weight: Only adds 20gr to base crank arm,Battery Life: 200+ hours (coin cell: CR2032),Power Range (Watts): 0 to 2500,Cadence Range (rpm): 20-220,Water Resistance Rating: IPX7,Frame Compatibility: Most frames, see fit guide in our Support section,Device Compatibility: ANT+, Bluetooth Smart Ready,Software Compatibility: Stages Link, Training Peaks, Strava, Garmin Training Center and others,Tool free battery replacement,Active temperature compensation,Accelerometer based cadence measurement,Wireless firmware upgrades.
The power meter tech behind seven Grand Tour wins is now available for Cannondale’s latest HollowGram Si cranks, helping you unlock your true potential as a rider, whether you’re flying up mountain passes, testing your limits on gravel or going full send on the trails.The power meter tech behind seven Grand Tour wins is now available for Cannondale’s latest HollowGram Si cranks, helping you unlock your true potential as a rider, whether you’re flying up mountain passes, testing your limits on gravel or going full send on the trails.Stages Power has carried riders to five Tour de France victories plus wins in the Giro and Vuelta along with many more world and national championships. If you believe racing provides the world’s best product proving ground, then Stages Power is proven as the world’s best power meter.ATC – Active Temperature CompensationThe consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. ATC is a key reason riders trust data from Stages Power no matter how much the day warms or temperatures plummet as you crest an Alpine peak.Individual Calibration For The Most Reliable ResultsEach Stages Power meter is assembled in Stages’ own state-of-the-art facility in Colorado, USA. Here every single unit is calibrated individually to ensure a +/- 1,5% accuracy level – an industry best for non-scientific power meters.SPECIFICATIONSStages Power L Accuracy: ± 1.5% (compared with Generation 2 Accuracy: ± 2%),Weight: Only less than 20gr to base crank arm,Battery Life: 200+ hours (coin cell: CR2032),Power range (Watts): 0 - 2500,Cadence range (rpm): 20 - 220,Water resistance rating: IPX7,Device Compatibility: ANT+, Bluetooth Smart Ready,Software Compatibiity: Training Peaks, Strava, Garmin Training Center and others.ADDITIONAL FEATURESTool free battery replacement,Active temperature compensation,Accelerometer based cadence measurement,Wireless firmware upgrades.
The Stages Power L meter paired with FSA's SL-K Light BB30 left crank arm. Please note that the SL-K Light BB30 version has across the board compatibility with FSA and Vision BB30 models.The new Stages Power meter is slimmer, and up to 28-percent lower profile than our original meter. It's sleeker by way of a 17-percent reduction in frontal area, and we've also made it stronger. The new housing design increases the strength of the battery door and housing connection by 200-percent over the previous design.SPECIFICATIONS:Stages Power L Accuracy: ± 1.5% (Compared with Generation 2 Accuracy: ± 2%),Power Meter Housing: new low profile design, with new door interface,Weight: Only adds 20g to base crank arm,Battery Life: 200+ hours (coin cell: CR2032),Power range (Watts): 0 - 2500,Cadence range (rpm): 20 - 220,Water resistance rating: IPX7,Frame Compatibility: Most frames, see fit guide in our Support section,Device Compatibility: ANT+, Bluetooth Smart Ready,Software Compatibiity: Training Peaks, Strava, Garmin Training Center and others.ADDITIONAL FEATURES:Tool free battery replacement,Active temperature compensation,Accelerometer based cadence measurement,Wireless firmware upgrades.
The spindles are manufactured for Stages Cycling by Full Speed Ahead, forged and machined out of aluminum to allow for the carbon Stages Power meter to be used with Sram BB30 road and Sram BB30 mountain bike (168mm Q-factor) drive side cranks as well as Race Face Next SL cranks. The Stages Power BB spindles are specifically designed to meet or exceed the performance of the manufacturer’s stock component, while allowing the retrofit of the new Stages Power Carbon to a rider’s SRAM or Race Face drivetrain.
The stages power l for shimano grx rx810 is built onto the non-drive side of a shimano grx rx810 crank arm and is compatible with all frames that fit shimano grx rx810 cranks. Specifications: Stages power accuracy: ±1.5% (compares with generation 2.0 accuracy: ± 2%), Weight: only adds 15gr to base crank arm, Battery life: 200+ hours (coin cell: cr2032), Power range (watts): 0 to 2500, Cadence range (rpm): 20-220, Water resistance rating: ipx7, Frame compatibility: most frames, see fit guide in our support section, Device compatibility: ant+, bluetooth smart ready, Software compatibility: stages link, training peaks, strava, garmin training center and others,. Additional Features: Active temperature compensation, Accelerometer based cadence measurement, Tool free battery replacement,Lifetime access to stages link for power meter management and firmware upgrade,.
Stages Power Right for Shimano Dura-Ace 9100 or Ultegra R8000 is a right side only power meter that will transform new and existing Gen 2 Stages Power meters into a dual-sided power option.Specifications:Accuracy: ± 1.5%,Weight: Only less than 15gr to base crank arm,Battery Life: 200+ hours (coin cell: CR2032),Power range (Watts): 0 - 2500,Cadence range (rpm): 20 - 220,Water resistance rating: IPX7,Frame Compatibility: Most frames, see fit guide in our Support section,Chainring Compatibility: 53 x39, 52x36, 50x34,Device Compatibility: ANT+, Bluetooth Smart Ready,Software Compatibiity: Stages Link, Today's Plan, Training Peaks, Strava, Garmin Training Center and others,Tool free battery replacement,Active temperature compensation,Accelerometer based cadence measurement,Wireless firmware upgrades.
The G3 Stages Power Meter L replaces the non-drive crank arm and is compatible with all Shimano Hollowtech II road drivetrains.Key Features:Handcrafted in Colorado, USA,± 1.5 % accuracy in all conditions,Active temperature compensation firmware,Wirelessly upgradable firmware,Updated accelerometer and addition of gyroscope for improved cadence resolution,Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength,Battery Life: 200+ hours (coin cell: CR2032),Power range (Watts): 0 to 2500,Cadence range (rpm): 20-220,Water resistance rating: IPX7.
Built for Performance. The redesigned and reimagined Stages Dash L200.Enhance your performance with a full assortment of workout features, the 2.7” full-color screen and cycling-specific maps. Only focus on the important things and make use of the integrated, automatic profiles - saving you time.Let the Dash M200 adds the data fields based on your connected sensors and get the metrics that matter the most. Provide yourself with the best training features, a full-colored screen, and a performance-built GPS computer – 200% customizable. Unleash your potential, no matter where or how you ride- just ride.Key Features:Full colour screen and comprehensive work-out graphics (colour wheel and live ride-analysis),Coloured course climbing/elevation profile including progress tracking and color-coded elevation grade,Cycling-specific maps with color coded roads, bike routes, paths and trails,Preloaded with cycling specific maps for whole Europe (additional regions are available for free),Wi-Fi enabled for wireless transfer of routes, workouts, and rides,Compatible with Apps like Strava, Komoot, TodaysPlan, Relive, RideWithGPS,Automatic Profiles: See data fields that are automatically built based on connected sensors,Benefit from advanced power metrics including TSS, IF and Normalized Power,Live data graphing: See live graphs on the device of power, heart rate, cadence, speed, or elevation,Built-in ambient light sensor automatically brightens or dims to optimize visibility and runtime in variable light,Color-coded workout graphs and interval progress graph to track your performance already during your ride,Fully customizable layout: Choose between landscape or portrait mode, user defined profiles, preset and custom screen layouts.Specification:Display Size: 2.7",Display technology: Everbright OCA screen,Display resolution: 240x320px, Overall dimensions: 94mm x 60mm x 22mm, Weight: 105 grams, Buttons: 5, Storage space: 16GB, Battery Life: Up to 18 hours, Mount: Quarter turn, Waterproof Rating: IP57, Satellite Network: GPS and QZSS with SBAS(WAAS, EGNOS, MSAS, and GAGAN), File compatibility: .FIT, .GPX, .TCX, Smartphone Compatibility: Android and iOS, Data transfer: Wifi, USB and Bluetooth, Sensor Compatibility: Speed, Cadence, Heartrate, power meter sensor, Trainer Control and E-Bike, Customization: On unit or Stages Cycling App .In the box: Stages Dash - L200 GPS Computer, Quarter turn mount for Stages Dash L200, User manual.