Run any Shimano cranks in any bottom bracket designed for 30 mm axles
SYSTEM EX STEM RAISER / QUILL ADAPTORAn alloy raiser that converts bikes with quill stem systems to aheadset type stemsCombines with high-rise stems to raise handlebars6061-T6 alloyCompatible with 11/8' x 1' and 11/8' x 11/8' (using shim included)Silver
Adaptor for the Park CRC-1 that allows the quick and perfect facing of 1.5' / 39.8 mm standard crown racesDesigned for use on tapered steerer forksGrub screws lock adaptor and cutter in place for easy useIncludes precision ground crown race cutterFor best results use plenty of Park CF-2 cutting fluid
Adaptor Kits only see other listings for RRP bearing press to use with these kitsSee Size guide for kit DetailsThe Bearing Press & Extraction Tool (BPET) is designed for the ‘Home Mechanic’ for use on ‘LINKAGE BEARINGS’ however it still works on many pivot and hub bearings (adaptors & kits are being developed for hubs & pivot bearing use)Instructions for UseFirstly ensure you have the correct RRP Bearing Kit to match the bearings you intend to insert / extract (see list below). You can identify which kit you need either by reading the bearing number written on the rubber seal or you can measure the inner bore race and outer race of the bearing (as shown below) and match it to our list belowExtracting Bearings (RED adaptors) - SOLD SEPARATELYPlace the RED adaptors from your RRP BEARING KIT as shown below take time to ensure that all the parts fit flush and are aligned to prevent any damage to parts or frame. In particular check that the female adaptor cup is flush on the frame to prevent frame damage.Wind on the main handle until the parts all come together make a final check that everything is aligned properly. Continue to wind on the main handle which will allow the male adaptor to pull on the inner race of the bearing and extract it into the female adaptor cup (NB: The male adaptor passes through the female adaptor to ensure a uniform and true extraction*) it will become harder to turn once the bearing starts to extract. After a couple of turns stop and check that the bearing is extracting properly before continuingInserting Bearings (BLUE adaptors) - SOLD SEPARATELYPlace the BLUE adaptors from your RRP BEARING KIT as shown below take time to ensure that all the parts fit flush and are aligned to prevent any damage to parts or frame.Wind on the main handle until all the parts come together the male adaptor should be pressing on the outer race of the bearing you are inserting. Make a final check that everything is all aligned. Continue to wind on the main handle the male adaptor will press onto the outer race of the bearing and insert it (NB: The male adaptor passes through the female adaptor to ensure a uniform and true insertion*) it will become harder to turn once the bearing starts to insert. After a couple of turns stop and check that the bearing is inserting properly before continuing
Axle adaptors to allow the fitting of Burley standard hitches to frames with tight dropoutsAdaptors for 3/8 x26, M10 x1.0, M10.5 x 1.0 & QR axle types available
Setting the standard for disc wheel head adaptors since Francesco Moser's hour record in 1984, the Silca Press on Disc Wheel Pump Adaptor has an ultra-durable lightweight 6066-T6 aluminium construction and a CompressionHead design that allow you to tighten the gasket by over 200% by simply rotating the cap 180° clockwise on your bike pump.The Silca Press on Disc Wheel Pump Adaptor fits only Presta valves and thanks to the CompressionHead technology it will fit even the most worn valves. The gasket is constructed from Silca's high-tech 252 Elastomeric rubber, which borrows technology form industries that require an air-tight fit. This means the gasket has a lifespan five-time longer than that of carbon filled rubber or Buna-N rubber gaskets used by rival pumps.With its slimline aluminium design, the Silca Press on Disc Wheel Pump Adaptor fits neatly into any disc wheel and can handle pressures up to 393 psi. The full metal construction means there are no plastic parts to fail and the Schrader thread will fit onto any Schrader pump head.Key Features:Threads into any Schrader pump head,Can only be used to inflate Presta valves,Exclusive CompressionHead design can tighten gasket over 200% by simply tightening cap,CompressionHead allows you to adjust fit for even the most worn Presta valves,True no-holding disc inflation on ALL style Presta valves including threaded stems,Full metal construction, no plastic parts to wear or fail,Available only in black.
Our Quad Lock MAG™ Universal Adaptor features our secure locking mechanism compatible with all Original twist and lock mounts and can be directly adhered to phones, cases and most flat metal or plastic surfaces.Slim ProfileAt just 5.3mm thick, the Quad Lock MAG™ Universal Adaptor fits seamlessly onto the back of smartphones and cases.Quad Lock MagThe Quad Lock MAG™ Universal Adaptor is compatible with Quad Lock MAG™ standard heads and Quad Lock® Original twist and lock mounts.Quad Lock MAG™ makes mounting your phone even faster, simply position your phone and the magnets do the rest.
Take your photography to the next level with the Quad Lock® Tripod AdaptorCapture Steady FootageNo more shaky footage, connect your Quad Lock® to a tripod to capture beautiful still photos, steady video footage, great low-light shots and use time-lapse with easeFast to mount & secureSimply install the Quad Lock® Tripod Adaptor to your camera tripod, and twist and lock your Quad Lock equipped smartphone directly to the mountPlease NoteThe Adaptor is fitted with an industry standard 1/4" 20 female thread, so you can attach it to most tripod and monopods. Due to their size, the iPhone 13 Pro Max, 12 Pro Max, Samsung Note 20 Ultra, S20 Ultra, S21 Ultra & Huawei P40 Pro can only be used in landscape modeTechnical100mm tall and 25mm wide,Polycarbonate construction,1/4" - 20 female thread,Compatible with all Quad Lock® Cases and Universal Adaptors.
Adapter that fits in one side of a SPD-compatible pedals that allows you to use ordinary street shoesDual reflectors for added safety,Easy installation and removal,Works with two-bolt SPD cleat system (not compatible with three-bolt SPD-SL)..
It couldn’t be simpler – with this frame lock chain made of hardened steel, you have the perfect secondary security for your bicycle.The ADAPTOR CHAIN Frame Lock Chain from ABUS makes it particularly easy to make your bicycle twice as secure: simply place the chain around a fixed object, pull the end with the lock through the ring on the chain and attach it to the lock housing. You will not need another key, nor will you need to lock the shackle separately. The ADAPTOR CHAIN Frame Lock Chain is suitable for use with ABUS frame locks 4960, 5850, 5650 and 5950.Technology:6 and 8 mm thick, square chain made of hardened steel,Separate locking of the shackle is not necessary,Opens up a lot of opportunities for locking the bicycle on to a fixed object,Suitable for use with frame locks 4960, 5850, 5650 and 5950,.Operation and use:For securing a bicycle against unauthorised use.
With the ADAPTOR CABLE, you can easily secure your bicycle or bicycle accessories. Simply connect it to the compatible ABUS frame lock – and that’s it.The ADAPTOR CABLE is a high-quality steel cable which, when connected to an existing ABUS frame lock, serves as additional security for your bicycle or for various accessories. For example, with the frame lock cable you can quickly and easily secure your bicycle bag, seat bag or even your helmet against theft when not using it. The ABUS frame locks 4960, 5850, 5650 and 5950 are all compatible with the ADAPTOR CABLE.Technology:12 mm thick, high-quality steel cable,Opens up a lot of opportunities for locking the bicycle on to a fixed object,Suitable for use with frame locks 4960, 5850, 5650 and 5950,.Operation and use:For securing a bicycle against unauthorized use.