Run any Shimano cranks in any bottom bracket designed for 30 mm axles.
With the Press on Disc Adaptor Aluminium, its all about the gasket when it comes to making sure you get an ultra-secure airtight seal during inflation. The high-tech 252 Elastomeric gasket is constructed from 6066-T6 aluminium for durability and strength and features Silca's CompressionHead design which increases the snugness of the fit by 200% just by tightening it in your normal way. Capable of withstanding use at 393psi before succumbing to blow-off, the Press on Disc Adaptor Aluminium is around 3x as strong as its rivals, making it the must-have adaptor for adaptability, performance and longevity.
Silca Press-On Disc Wheel Pump AdaptorRaising the bar when it comes to working with the world's fastest wheels, the Press on Disc Adaptor Aluminium from Silca is the smallest and most compact disc chuck around.Premium Disc Wheel Inflation Manufactured from 6066-T6 aluminium, this American-made adaptor continues Silca's tradition of world-class and elite level inflation devices and accessories. Featuring a bright-red 252 Elastomeric Internal gasket and brand new CompressionHead design, the Press on Disc Adaptor Aluminium gives a tried and tested ultra-airtight seal. Measuring a massive blow-off pressure of 393psi, three times higher than its peers, this highly-durable and efficient adaptor is one tough chuck. Features: Material: 6066-T6 Aluminium Compatibility: Schrader, Presta (inflation only) Head Type: CompressionHead, able to tighten gasket over 200% by simply tightening cap Buy Silca Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Setting the standard for disc wheel head adaptors since Francesco Moser's hour record in 1984, the Silca Press on Disc Wheel Pump Adaptor has an ultra-durable lightweight 6066-T6 aluminium construction and a CompressionHead design that allow you to tighten the gasket by over 200% by simply rotating the cap 180° clockwise on your bike pump.The Silca Press on Disc Wheel Pump Adaptor fits only Presta valves and thanks to the CompressionHead technology it will fit even the most worn valves. The gasket is constructed from Silca's high-tech 252 Elastomeric rubber, which borrows technology form industries that require an air-tight fit. This means the gasket has a lifespan five-time longer than that of carbon filled rubber or Buna-N rubber gaskets used by rival pumps.With its slimline aluminium design, the Silca Press on Disc Wheel Pump Adaptor fits neatly into any disc wheel and can handle pressures up to 393 psi. The full metal construction means there are no plastic parts to fail and the Schrader thread will fit onto any Schrader pump head.Key Features:Threads into any Schrader pump head,Can only be used to inflate Presta valves,Exclusive CompressionHead design can tighten gasket over 200% by simply tightening cap,CompressionHead allows you to adjust fit for even the most worn Presta valves,True no-holding disc inflation on ALL style Presta valves including threaded stems,Full metal construction, no plastic parts to wear or fail,Available only in black.
The SKS Anywhere bottle cage adapter really lives up to its name. You can mount it anywhere on the bike frame, even where there are no mounting holes. Included is the TopCage bottle cage, its rubberised straps provide a firm and stable fit to tubes of any shape in diameters between 50 and 80mm. The Velcro fastening means it can be removed in seconds.
No possibility of mounting something on the frame The SKS Anywhere Bottle Cage Adaptor enables bottle cages, bags, replacement tubes, locks or pumps to be mounted almost anywhere on the bike. The mounting system comprises two adapters and two durable hook and loop fastener straps. These can be shortened without difficulty and fit on all tubes with a maximum diameter of 80mm. The rubberised surface protects the paintwork and ensures that nothing slips even during a hard ride in rough terrain.Length: 330mmCircumference: to 250mmDiameter: up to 80mm
Make sure you choose one with the correct air pressure range as rear shocks usually require much higher pressure than forks.
SKS Marzocchi Adaptor If you've got air suspension, you need a shock pump. They give you control of the high-pressure, low-volume air spring inside the suspension components. Make sure you choose one with the correct air pressure range as rear shocks usually require much higher pressure than forks. Features: This is an adapter for your SKS shock pump. Will fit Marzocchi shocks. Buy SKS Accessoriesfrom Chain Reaction Cycles, the World's Largest Online Bike Store.
Constructed from a dependable and durable aluminium, these end caps let you change the sizing of your hub axles for improved control and rigidity on your back end.
Spank OOZY-SPIKE Rear MTB Hub SRAM XD AdaptorAn excellent set of end caps to add control and stiffness to your rear-end, this genuine Spike adaptor kit lets you ride across rowdier routes with improved composure. Converting Spike R135/142 or Oozy Trail R142/135 rear hubs to 12x135mm or QRx135mm sizing, these easy to fit caps are an excellent addition for any big-riding mountain maverick. Features: Suitability: All Oozy hubs and wheels and Spike and Spoon (135mm) wheels produced in 2016 or later (with Spike hubs). Compatibility: SRAM XD freehubs only Buy Spank Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Spank Conversion Kit FrontThis Genuine Spank conversion kit will enable you to use your Oozy, Spike and Spoon front hubs in forks with 15x100mm dropouts.Features:Genuine Spank Industries productSuits all Oozy models and Spike and Spoon models from 2016 onwardsDesigned for 15x100mm fork dropoutsBuy Spank Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
We at SRAM saw the opportunity to make a better press fit system where all the best from BB30 and PressFit™ bottom brackets would be combined into one captivating package. Pressfit 30™ will feature an integrated seal, pre-assembled into the cups, to further prolong bearing life. The key difference with Pressfit 30™ is how the bearings are fitted into the frame. Bearings are housed in nylon cups which will be pressed into the frames bottom bracket shell. This bottom bracket is designed for 30mm spindle cranksets. Frames will need a 46mm inner-diameter bottom bracket shell to accommodate this system. Pressfit 30™ for road will require a 68mm wide shell while Pressfit 30™ for MTB will require a 73mm wide shell. Easy installation PressFit cups for lighter weight Narrow Q-factor and more ankle clearance Integrated gutter seal to prolong life Integrated adjuster 30mm spindle diameter