Better Boost Adapter KitsDesigned for:Converting compatible DT-Swiss 15x100mm hubs to 15x110mm Boost standardThe new Better Boost Adapter Kits allow you to keep your existing 15x100mm front wheel as you upgrade to a new Boost 15x110mm fork.What makes them better?There are other conversion kits on the market, but ours is the best. One competing kit consists of two loose 5mm axle spacers that are a pain to install and are easily lost during wheel removal. Another provides you with just one endcap and requires that you re-dish your wheel to re-center it in your fork. The Better Boost Adapter Kit consists of two precisely machined end caps and a rotor spacer (and requistite bolts), and it requires NO DISHING.What hubs are compatible?There are currently two Better Boost Adapter Kits available:Better Boost Adapter Kit for DT-Swiss 350 15x100mm 6-bolt front hubsBetter Boost Adapter Kit for DT-Swiss 240s "Fifteen" 15x100 6-bolt front hubsOther compatibility info:Better Boost adapter kits are not compatible with QR or 20mm hubs, nor are they compatible with those featuring a Shimano Centerlock brake mount. Kits are not suitable for use with Rock Shox RS-1. 185mm max rotor size.
12mm Thru axle adaptor designed for shimano type axles.
Adapter kits to change Halo 6D Road Rear Disc hubs from 130mm OLD to 135mm OLD.Option A. Use to fit a 135mm Disc frame with standard 130mm spaced cranks.(Fits most crankset spacings).Select the required Freehub option.,Select your choice of suitable disc only or universal rim.,Select the +2.5mm symmetrical adaptor kit. (LH 2.5mm and RH 2.5mm cones). ,Mount the adapter with XL bolts (supplied).,Mount an IS disc rotor..Option B. Use to fit a 135mm Disc frame with 135mm specific spaced cranks.(Use with SRAM road 135mm cranksets with 2.5mm off-set).Select the required Freehub option.,Select your choice of suitable disc only or universal rim.,Select the +5mm asymmetrical adaptor kit. (LH 1 x 5mm cone, RH use Std cone)*.,Mount the adapter with XL bolts (supplied).,Mount an IS disc rotor..Note: : this option requires the wheel to be re-dished 2.5mm towards the non-drive side to ensure more equalised spoke tensionNote:In some circumstances, if using an MTB specific 10spd cassette in conjunction with a 135mm frame and a 130mm crank set-up (using the 2.5mm symmetric adaptor set) it is possible that you may encounter running difficulties in large sprocket to large chainwheel. This is due to a difference in cassette offset between Shimano MTB and Road 10spd sprockets. Fitting a Road-specific cassette will often solve the issue, or alternatively, switch to the asymmetric +5mm adaptor set and re-dish the wheel.
Compatible with Tru-Pro and FT-1, these adapters allow Thru Axle hubs/wheels to be used with these wheel truing jigs. Both 20mm and 15mm sizes.
Over the Air (OTA) firmware update capability and the BlueGiga dongle go together like a perfectly matched cleat and pedal. You could try to use one without the other, but you might not like the result. The BlueGiga dongle contains a Bluetooth (BLE) radio that allows PCs to communicate with BLE devices, such as our dual mode or BLE only cycling power meters. Reach for the BlueGiga USB over native BLE integration for firmware upgrades that are truly plug-and-play.Most importantly, the BlueGiga dongle is necessary to update the firmware Over the Air (OTA) via VirtualTraining for the Hammer and Magnus bike trainers.Key Features:Bluetooth dongle for PCs to work with Rouvy.,Needed for Over the Air Firmware Updates to Cycling Power Meters.,Works with PC desktops and laptops..
A split aluminium shim that fits over a 25.4 mm (1 inch) steerer tube changing the outer dimension to 28.6 mm (1-1/8 inch)Allows the use of a stem designed to fit 1-1/8 inch steerer tubes where greater choice is availableBlack anodised finish with laser etched detail
To assemble threadless stem on traditional threaded fork and headset.Fork steerer inside diameter diam 22.2mm,Stem inside diameter: 25.4mm,.Machined aluminium alloy.
The ANYWHERE bottle cage adapter really lives up to its name. You can mount it anywhere on the bike frame even where there are no mounting holes. Available with or without the TOPCAGE bottle cage its rubberised straps provide a firm and stable fit to tubes of any shape in diameters between 50 and 80mm. The velcro fastening means it can be removed in seconds.
Produced from robust polymer the COMPIT Light adapter allows you to attach a front light to the front of the COMPIT mount. Please note that an additional light-specific bracket could be required depending upon the design of the light / light head unit. CatEye compatible bracket CFB-100 CA5342440.
Produced by SKS this bracket replaces the lower bracket of a Bosch Intuvia head unit to allow an action camera or front light to be fitted in front of it. To be used in conjunction with SKC11545 Action Cam Adapter or SKC11582 Light Adapter.
The universal cover with its special mounting device is another possibility of securely mounting the smartphone on the COMPIT or the +COM/UNIT.
SM-MA90 XTR level machined out lightweight disc calliper mount adapter. For post type disc callipers to be mounted to international standard frames with 180 mm disc rotors