Wolf Tooth Tanpan Shimano AdaptorOffering the potential of a greater gear range and superior chain security, this adaptor enables you to run 10 speed Shimano MTB rear derailleurs with your 10 speed road shifters. This makes it ideal for riders who want to convert their drop bar set up to 1x. It works by amplifying your road shifter cable pull, giving you the potential to run a mountain bike rear derailleur. If you're looking to run a single chainring up front but with the gear range of a double - or want to retain a double and run super-low gears for ultra-steep hill mountain climbs, this is the upgrade for you.Easily installed in minutes and simply tucking above your rear derailleur, the Tanpan can be adjusted with its indexed barrel.CompatibilityCompatible with a wide range of road, gravel and cyclocross bikes.If your rear derailleur cable is routed internally through the chainstay and exits at the end of the chainstay above the axle or past the axle, you will need to use the inline version. This is because the Tanpan barrel adjuster end sits too close to the frame for the internally routed cable to exit the frame and enter the Tanpan barrel adjuster.Features: Use: MTB, Road, Gravel and Cyclocross Speed: Multiple options available to select separately Genuine Wolf Tooth spare partsBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
This Shimano adaptor is perfect for riders who want to convert their drop bar set up to 1x. It works by amplifying your road shifter cable pull, giving you the potential to run a mountain bike rear derailleur. If you’re looking to run a single chainring up front but with the gear range of a double – or want to retain a double and run super-low gears for ultra-steep hill mountain climbs, this is the upgrade for you. Easily installed in minutes and simply tucking above your rear derailleur, the Tanpan can be adjusted with its indexed barrel. Compatibility Compatible with a wide range of road, gravel and cyclocross bikes. If your rear derailleur cable is routed internally through the chainstay and exits at the end of the chainstay above the axle or past the axle, you will need to use the inline version. This is because the Tanpan barrel adjuster end sits too close to the frame for the internally routed cable to exit the frame and enter the Tanpan barrel adjuster.
The TL-FC38 from Shimano has been constructed from hardened steel for durability and to provide a solid engagement when working on your Shimano drivetrain. The Shimano tool is needed for the installation and removal of the O-Ring holder and chainring on the Shimano Steps chainring (SM-CRE60). This adapter removal tool has been specially designed to be used in conjunction with the Shimano TL-FC36, TL-FC33, or TL-FC32 tools and will provide precise and accurate tooling.
Attention: Not suitable for the QL3.1 system! Whether you’re traveling by bike or foot with the lightweight Carrying System your pannier can accompany you on both. When worn the Carrying System ergonomically adjusts to your back allowing air to circulate comfortably and keep sweat at bay. When not in use the Carrying System can simply be rolled up lengthways and stowed inside your pannier without taking up much space. To attach the Carrying System to your pannier hook the top loops into the pannier’s Quick-Lock hooks and snap the buckles into the base edge protectors of your bag. Additional load control belts even make bags with auxiliary fasteners easy to carry. FURTHER PRACTICAL DETAILS: + Compatible with all panniers with QL1 QL2 and QL2.1 and lower edge protection.+ Handle+ Small pack size+ Minimal weight+ Chest strap+ Reflective thread on the straps More Information COLOR black MATERIAL nylon BAG TYPE single DATASHEET Download WEIGHT 315 g | 11.1 oz HEIGHT 42 cm | 16.5 inch WIDTH 28 cm | 11 inch DEPTH 75 cm | 3 inch PROPERTIES nopvc
Better Boost Adapter KitsDesigned for:Converting compatible DT-Swiss 15x100mm hubs to 15x110mm Boost standardThe new Better Boost Adapter Kits allow you to keep your existing 15x100mm front wheel as you upgrade to a new Boost 15x110mm fork.What makes them better?There are other conversion kits on the market, but ours is the best. One competing kit consists of two loose 5mm axle spacers that are a pain to install and are easily lost during wheel removal. Another provides you with just one endcap and requires that you re-dish your wheel to re-center it in your fork. The Better Boost Adapter Kit consists of two precisely machined end caps and a rotor spacer (and requistite bolts), and it requires NO DISHING.What hubs are compatible?There are currently two Better Boost Adapter Kits available:Better Boost Adapter Kit for DT-Swiss 350 15x100mm 6-bolt front hubsBetter Boost Adapter Kit for DT-Swiss 240s "Fifteen" 15x100 6-bolt front hubsOther compatibility info:Better Boost adapter kits are not compatible with QR or 20mm hubs, nor are they compatible with those featuring a Shimano Centerlock brake mount. Kits are not suitable for use with Rock Shox RS-1. 185mm max rotor size.
The Thule FastRide Adapters are a set of 5 adapters that give you the ability to carry bikes with thru-axles on the Thule FastRide roof mount bike carrier. The 564100 includes adapters for 9mm captive, 12x100, 12x110, 15x100mm and 15x110mm thru-axles.Includes a set of 5 thru-axle adapters9mm captive, 12x100, 12x110, 15x100mm and 15x110mmFor use with Thule FastRide only
The Wahoo KICKR SNAP 142mm Rear Axle Adapter Kit is ideal for riders in the road disc brake revolution.
Designed for disc integration on the Stay Strong For Life V3 frames, allowing the rider to run a 120mm disc rotor utilising the frames shaved V brake mounts for a clean disc look. Rotor sold separately or within the Stay Strong full disc brake kit.
Shimano TL-FC38 Adaptor Removal ToolThis Shimano tool is required for the installation and removal of the O-Ring holder and chainring on the Shimano Steps chainring (SM-CRE60). This adaptor removal tool is designed to be used in conjunction with the Shimano TL-FC36, TL-FC33, or TL-FC32 tools and will provide precise and accurate tooling. It is constructed from hardened steel for durability and to provide a solid engagement when working on your Shimano drivetrain.Features: Genuine Shimano High-Quality Workshop Tool For installation and removal of O-ring holder and chainring SM-CRE60 (SHIMANO STEPS) Shimano Part No.: YEZY00010Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
EASY MOUNT adapterfor one brake,colour: black.Delivery includes the EASY MOUNT adapter and the accessories shown on the product picture.
EVO2 adapter, for one brake, black, incl. EVO2 mounting plate, black (1pc) EVO2 adapterFor one brake,Colour: black.Delivery includes the EVO2 mounting plate and the accessories shown on the picture.
Replacement 10mm bolts with 15-10mm adapter for Profile AC-2 or Elite 15/20 Hubs. The bolts are made from chromoly and come with the aluminium adapters to work with the AC-2 or Elite 15/20 hubs. -Sold as set (2pcs) -Includes Aluminium volcano cone washers -Use 8mm hex key