Campagnolo Rear Disc Caliper Flat Mount AdapterThis item is a front disc mount adaptor and bolts for use with the Campagnolo Ekar calipers.Features: Genuine Campagnolo Spares Rear Brake Specific Compatible with Ekar calipers Manufacturer's Part Number: CPS993BBuy Campagnolo Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Adaptor Kits only see other listings for RRP bearing press to use with these kitsSee Size guide for kit DetailsThe Bearing Press & Extraction Tool (BPET) is designed for the ‘Home Mechanic’ for use on ‘LINKAGE BEARINGS’ however it still works on many pivot and hub bearings (adaptors & kits are being developed for hubs & pivot bearing use)Instructions for UseFirstly ensure you have the correct RRP Bearing Kit to match the bearings you intend to insert / extract (see list below). You can identify which kit you need either by reading the bearing number written on the rubber seal or you can measure the inner bore race and outer race of the bearing (as shown below) and match it to our list belowExtracting Bearings (RED adaptors) - SOLD SEPARATELYPlace the RED adaptors from your RRP BEARING KIT as shown below take time to ensure that all the parts fit flush and are aligned to prevent any damage to parts or frame. In particular check that the female adaptor cup is flush on the frame to prevent frame damage.Wind on the main handle until the parts all come together make a final check that everything is aligned properly. Continue to wind on the main handle which will allow the male adaptor to pull on the inner race of the bearing and extract it into the female adaptor cup (NB: The male adaptor passes through the female adaptor to ensure a uniform and true extraction*) it will become harder to turn once the bearing starts to extract. After a couple of turns stop and check that the bearing is extracting properly before continuingInserting Bearings (BLUE adaptors) - SOLD SEPARATELYPlace the BLUE adaptors from your RRP BEARING KIT as shown below take time to ensure that all the parts fit flush and are aligned to prevent any damage to parts or frame.Wind on the main handle until all the parts come together the male adaptor should be pressing on the outer race of the bearing you are inserting. Make a final check that everything is all aligned. Continue to wind on the main handle the male adaptor will press onto the outer race of the bearing and insert it (NB: The male adaptor passes through the female adaptor to ensure a uniform and true insertion*) it will become harder to turn once the bearing starts to insert. After a couple of turns stop and check that the bearing is inserting properly before continuing
Converts a thru axle hub from 15 / 20 mm to 9 mm standard Q/R.Allows truing stands to work with wheels with thru axle with adapters.One adapter each is required for both 15 mm and 20 mm. Compatible with Tru-Pro and FT-1 these adapters allow Thru Axle hubs/wheels to be used with these wheel truing jigs. Both 20mm and 15mm sizes x100mm
A brilliant lightweight self aligning designNo need to face your forks or frame the adaptor will compensate for any paint or frame imperfectionsPrecision laser cut from the best quality most durable aluminiumVery stiff to resist torsional forcesCompatible with virtually all brands of hydraulic and mechanical Disc callipers
A brilliant lightweight self aligning designNo need to face your forks or frame the adaptor will compensate for any paint or frame imperfectionsPrecision laser cut from the best quality most durable aluminiumVery stiff to resist torsional forcesCompatible with virtually all brands of hydraulic and mechanical Disc callipers
A brilliant lightweight self-aligning designNo need to face your forks or frame the adaptor will compensate for any paint or frame imperfectionsPrecision laser cut from the best quality most durable aluminiumVery stiff to resist torsional forcesCompatible with virtually all brands of hydraulic and mechanical Disc callipers
Adaptor for the Park CRC-1 that allows the quick and perfect facing of 1.5' / 39.8 mm standard crown racesDesigned for use on tapered steerer forksGrub screws lock adaptor and cutter in place for easy useIncludes precision ground crown race cutterFor best results use plenty of Park CF-2 cutting fluid
Direct mount adapter to fit XTR Di2 front derailleur to a direct mount design frame
Use if standard mount is not compatible with your bikeIf you are having problems making the Di2 battery fit try the battery mount adapter
SYSTEM EX STEM RAISER / QUILL ADAPTORAn alloy raiser that converts bikes with quill stem systems to aheadset type stemsCombines with high-rise stems to raise handlebars6061-T6 alloyCompatible with 11/8' x 1' and 11/8' x 11/8' (using shim included)Silver
Run any Shimano cranks in any bottom bracket designed for 30 mm axles
A brilliant lightweight self aligning designNo need to face your forks or frame the adaptor will compensate for any paint or frame imperfectionsPrecision laser cut from the best quality most durable aluminiumVery stiff to resist torsional forcesCompatible with virtually all brands of hydraulic and mechanical Disc callipers