The Stay Strong Reactiv hubset consists of the Reactiv 10mm alloy fully sealed front hub with alloy female axle and the Reactiv alloy fully sealed rear hub with hollow axle, 6 Pawl, 180 points of engagement and alloy 7075 16T cog. ###section### Product Specs HUB TYPE:Cassette AXLE:Front 10mm / Rear 10mm DRIVER:16t SPOKE HOLES:28 WEIGHT:Front 168g / Rear 413g
These lightweight, strong BMX forks have a built in bearing race and a threadless 1-1/8" steertube with 10mm dropouts. 100% 4130 heat treated butted Chromoly. Alloy top cap with etched logo included. No rider weight limit. ###section### Product Specs Steerer Length: TBC Steerer Diameter: 1 1/8" Wheel Size: 24" Material: Chromoly Dropout Size: 10mm Offset: TBC Weight: 892g (top cap included)
These lightweight, strong BMX forks have a built in bearing race and a threadless 1-1/8" steertube with 10mm dropouts. 100% 4130 heat treated butted Chromoly. Alloy top cap with etched logo included. No rider weight limit. ###section### Product Specs Steerer Length: TBC Steerer Diameter: 1 1/8" Wheel Size: 20" Material: Chromoly Dropout Size: 10mm Offset: TBC Weight: 870g (top cap included)
These lightweight, strong BMX forks have a built in bearing race and a threadless 1-1/8" steertube, tapered at the headtube, with 10mm dropouts. 100% 4130 heat treated butted Chromoly. Alloy top cap with etched logo included. No rider weight limit. ###section### Product Specs Steerer Length: TBC Steerer Diameter: Tapered 1 1/8" - 1 1/2" Wheel Size: 20" Material: Chromoly Dropout Size: 10mm Offset: TBC Weight: 800g (top cap included)
These lightweight, strong BMX forks have a built in bearing race and a threadless 1" steertube with 10mm dropouts. 100% 4130 heat treated butted Chromoly. Alloy top cap with etched logo included. No rider weight limit. ###section### Product Specs Steerer Length: TBC Steerer Diameter: 1" Wheel Size: 20" Material: Chromoly Dropout Size: 10mm Offset: TBC Weight: 625g (top cap included)
These lightweight, strong BMX forks have a built in bearing race and a threadless 1-1/8" steertube, tapered at the headtube, with 10mm dropouts. 100% 4130 heat treated butted Chromoly. Alloy top cap with etched logo included. No rider weight limit. ###section### Product Specs Steerer Length: TBC Steerer Diameter: Tapered 1 1/8" - 1 1/2" Wheel Size: 24" Material: Chromoly Dropout Size: 10mm Offset: TBC Weight: 870g (top cap included)
These lightweight, strong BMX forks have a built in bearing race and a threadless 1" steertube with 10mm dropouts. 100% 4130 heat treated butted Chromoly. Alloy top cap with etched logo included. No rider weight limit. ###section### Product Specs Steerer Length: TBC Steerer Diameter: 1" Wheel Size: 20" Material: Chromoly Dropout Size: 10mm Offset: TBC Weight: 540g (top cap included)
The new e-bike saddle 6OX combines the advantages of the successful saddle models Ergowave and Ergolux. As part of the product development, the shape of the saddle was adapted and perfected for the special use on the E-MTB as well as for the Gravity Bike.Perfect Fit - The correct saddle width is a key for maximum performance. Available widths in cm: 13, 14, 15, 16More free space - less pressure - The proven, outstanding SQlab staged saddle shape with the saddle nose that dips below level also provides more freedom for the 6OX and less pressure, equally so for men and for women.Perfect hold - The SQlab saddle shape with the raised seat surface is already perfectly suited for riding uphill and provides more power to the pedals on straights. Additionally, a special non-slip logo design ensures even more grip towards the back.Grip design - The grip material on the raised stage provides additional hold towards the back.Biomechanics - The proven SQlab 6OX active saddle technology provides increased efficiency for pedalling, as well as more comfort and less stress on intervertebral discs.The 6OX saddle is equipped with 3 different elastomer dampers that are tailored individually to body weight and can be interchanged as needed.The wave shaped 6OX profile which contours from the rear to the front offers a perfect form-fit shape for most sit bones. The raised back section provides more rearward support and ensures efficient power transmission. The grip material on the raised back provides additional support to the rear. In addition, the saddle cover is robust, especially at the edges.The level and lowered saddle nose applies less pressure to the sensitive areas of men and women alike. For an even better pressure relief, especially on long technical climbs, the saddle nose of the 6OX became a little bit wider, but just as flat and with largest possible surface area. The padding was designed for the specific needs on the E-MTB with perfect dampening properties for rough off-road terrain.Due to these modifications, the 6OX is the ideal saddle for long and steep climbs on the E-MTB and at the same time, even on bikes without an engine, it provides an optimum relief. The wave shaped 6OX profile which contours from the rear to the front offers a perfect form-fit shape for most sit bones.The SQlab active-saddle technology lets the saddle follow the pedalling motion as comfort increases, the vertebral discs are mobilized and pressure on the sit bones is minimised. The correct width saddle is a prerequisite for maximum performance. Available widths: 13 cm/14 cm/15 cm/16cm.
The new e-bike saddle 6OX combines the advantages of the successful saddle models Ergowave and Ergolux. As part of the product development, the shape of the saddle was adapted and perfected for the special use on the E-MTB as well as for the Gravity Bike.Perfect Fit - The correct saddle width is a key for maximum performance. Available widths in cm: 13, 14, 15, 16More free space - less pressure - The proven, outstanding SQlab staged saddle shape with the saddle nose that dips below level also provides more freedom for the 6OX and less pressure, equally so for men and for women.Perfect hold - The SQlab saddle shape with the raised seat surface is already perfectly suited for riding uphill and provides more power to the pedals on straights. Additionally, a special non-slip logo design ensures even more grip towards the back.Grip design - The grip material on the raised stage provides additional hold towards the back.Biomechanics - The proven SQlab 6OX active saddle technology provides increased efficiency for pedalling, as well as more comfort and less stress on intervertebral discs.The 6OX saddle is equipped with 3 different elastomer dampers that are tailored individually to body weight and can be interchanged as needed.The wave shaped 6OX profile which contours from the rear to the front offers a perfect form-fit shape for most sit bones. The raised back section provides more rearward support and ensures efficient power transmission. The grip material on the raised back provides additional support to the rear. In addition, the saddle cover is robust, especially at the edges.The level and lowered saddle nose applies less pressure to the sensitive areas of men and women alike. For an even better pressure relief, especially on long technical climbs, the saddle nose of the 6OX became a little bit wider, but just as flat and with largest possible surface area. The padding was designed for the specific needs on the E-MTB with perfect dampening properties for rough off-road terrain.Due to these modifications, the 6OX is the ideal saddle for long and steep climbs on the E-MTB and at the same time, even on bikes without an engine, it provides an optimum relief. The wave shaped 6OX profile which contours from the rear to the front offers a perfect form-fit shape for most sit bones.The SQlab active-saddle technology lets the saddle follow the pedalling motion as comfort increases, the vertebral discs are mobilized and pressure on the sit bones is minimised. The correct width saddle is a prerequisite for maximum performance. Available widths: 13 cm/14 cm/15 cm/16cm.
The new e-bike saddle 6OX combines the advantages of the successful saddle models Ergowave and Ergolux. As part of the product development, the shape of the saddle was adapted and perfected for the special use on the E-MTB as well as for the Gravity Bike.Perfect Fit - The correct saddle width is a key for maximum performance. Available widths in cm: 13, 14, 15, 16More free space - less pressure - The proven, outstanding SQlab staged saddle shape with the saddle nose that dips below level also provides more freedom for the 6OX and less pressure, equally so for men and for women.Perfect hold - The SQlab saddle shape with the raised seat surface is already perfectly suited for riding uphill and provides more power to the pedals on straights. Additionally, a special non-slip logo design ensures even more grip towards the back.Grip design - The grip material on the raised stage provides additional hold towards the back.Biomechanics - The proven SQlab 6OX active saddle technology provides increased efficiency for pedalling, as well as more comfort and less stress on intervertebral discs.The 6OX saddle is equipped with 3 different elastomer dampers that are tailored individually to body weight and can be interchanged as needed.The wave shaped 6OX profile which contours from the rear to the front offers a perfect form-fit shape for most sit bones. The raised back section provides more rearward support and ensures efficient power transmission. The grip material on the raised back provides additional support to the rear. In addition, the saddle cover is robust, especially at the edges.The level and lowered saddle nose applies less pressure to the sensitive areas of men and women alike. For an even better pressure relief, especially on long technical climbs, the saddle nose of the 6OX became a little bit wider, but just as flat and with largest possible surface area. The padding was designed for the specific needs on the E-MTB with perfect dampening properties for rough off-road terrain.Due to these modifications, the 6OX is the ideal saddle for long and steep climbs on the E-MTB and at the same time, even on bikes without an engine, it provides an optimum relief. The wave shaped 6OX profile which contours from the rear to the front offers a perfect form-fit shape for most sit bones.The SQlab active-saddle technology lets the saddle follow the pedalling motion as comfort increases, the vertebral discs are mobilized and pressure on the sit bones is minimised. The correct width saddle is a prerequisite for maximum performance. Available widths: 13 cm/14 cm/15 cm/16cm.
The 611 Ergowave Active 2.1 is designed to meet the requirements of all-mountain and enduro riding, making it the perfect match for modern bikes that relish long days on the biggest terrain.Designed specifically for use on all mountain and enduro mountain bikesWave shape with raised rear section is perfect for efficient power transferLowered nose is 4mm wider than 612 and provides optimal relief for the perineal area280mm in length to give maximum range of movement when climbing and descendingS-tube rails and superlight foam padding keep weight down to just 223g (13cm size)The new 611 Ergowave Active 2.1 has been given a form, function and comfort upgrade for long uphills and trail descents on the mountain bike. The 611 Ergowave Active 2.1 is equipped with the new active technology with a softer and lighter movement with less weight. The SQlab active saddle technology means that the saddle follows the pedalling movement, which increases comfort, mobilises the intervertebral discs and minimises pressure on the sit bones.The saddle's wave-like shape and raised rear ensure perfect rearward support and optimum pressure distribution which significantly improves power transmission to the pedal. The lowered nose, in combination with the recess in the middle, creates more space and clearance for the perineal area for both women and men. The padding material has been specially adapted to the requirements of MTB and has more damping in rough terrain. High-quality Kevlar cover protects the particularly stressed areas on the saddle. If you want a supremely comfortable saddle for your all mountain or enduro bike, look no further than the SQlab 611 Ergowave Active 2.1!
The 611 Ergowave Active 2.1 is designed to meet the requirements of all-mountain and enduro riding, making it the perfect match for modern bikes that relish long days on the biggest terrain.Designed specifically for use on all mountain and enduro mountain bikesWave shape with raised rear section is perfect for efficient power transferLowered nose is 4mm wider than 612 and provides optimal relief for the perineal area280mm in length to give maximum range of movement when climbing and descendingS-tube rails and superlight foam padding keep weight down to just 223g (13cm size)The new 611 Ergowave Active 2.1 has been given a form, function and comfort upgrade for long uphills and trail descents on the mountain bike. The 611 Ergowave Active 2.1 is equipped with the new active technology with a softer and lighter movement with less weight. The SQlab active saddle technology means that the saddle follows the pedalling movement, which increases comfort, mobilises the intervertebral discs and minimises pressure on the sit bones.The saddle's wave-like shape and raised rear ensure perfect rearward support and optimum pressure distribution which significantly improves power transmission to the pedal. The lowered nose, in combination with the recess in the middle, creates more space and clearance for the perineal area for both women and men. The padding material has been specially adapted to the requirements of MTB and has more damping in rough terrain. High-quality Kevlar cover protects the particularly stressed areas on the saddle. If you want a supremely comfortable saddle for your all mountain or enduro bike, look no further than the SQlab 611 Ergowave Active 2.1!