The 4.5 Neck Brace is engineered to channel crash forces from your helmet to your body, thus isolating your neck from, and reducing, the forces that could otherwise cause neck injuries. It also has a collarbone cut-out to prevent your helmet from impacting your most fragile and vulnerable bones. Leatt's CoreFlex split rear folding thoracic strut gives a perfect fit, allowing optimal freedom of movement but will break away to protect your back from unwanted pressure. The fit is also easily customisable via the two-way adjustability at the rear while the split front dials in more comfort. Easy-to-clean foam padding also gives you extra comfort. Lab and Rider Tested The 4.5 Neck Brace system has undergone independent lab testing and has been used at the highest level of mountain bike competition. In both cases, it has proven itself to be vital in reducing injury during a crash. This is achieved by transferring the load during an accident away from the fragile bones in the neck. • Up to 89% reduction in critical cervical spine injuries* • Collarbone injuries up to 45% MORE likely WITHOUT a neck brace* § *Independent Moto motorcycle study by Action Sports EMS
POC Tectal Race MIPS HelmetDeveloped using POC’s Whole Helmet Concept™, the POC Tectal Race MIPS Helmet deploys the powers of MIPS to keep your head protected on your all-mountain, trail-shredding, enduro-racing, dirt-kicking mountain bike adventures. An advanced all-mountain helmet, the Tectal Race MIPS Helmet feels fantastic to wear when you're enjoying the thrills and heart-pumping exhilaration of going full speed down MTB trails. And should you push your capabilities just a bit too far, the superb range of protective features add safety should you take a tumble. Take on The Trails with ConfidenceThe construction method of the Tectal race is borrowed from POC's groundbreaking Octal road cycling helmet. This sees a tough unibody shell bonded to a shock-absorbing EPS liner. The shell provides durable protection against minor knocks and in the event of a more serious fall enhances structural integrity. An Aramid bridge system, first seen in POC’s proven and award-winning Trabec helmet also allow POC to further enhance structural stability and improve penetration protection.At the core of the helmet is the EPS foam liner. This is the layer that soaks up harder head impacts during a fall. The density and thickness vary in order to optimise protection where it's needed most.The design of the Tectal Race also sees greater coverage specifically tailored for mountain biking. This gives extra protection across the temples and back of the head, so you're covered if you go over the bars or off the back.And if that wasn’t enough, a RECCO® Reflector lets emergency services scan for you should you become lost on a backcountry mountain biking adventure.MIPS Integra Head Protection SolutionThe Tectal Race also features the MIPS Integra system. This brings together POC's 'whole-helmet' safety and design ethos with the fully integrated brain-protecting technology of MIPS. This holistic approach sees every detail of the helmet engineered to work in harmony with each other, giving you new levels of seamless safety, comfort, ventilation, fit and function.MIPS (Multi-directional Impact Protection System) The Mips system is designed to provide added safety for helmets in many accidents. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head.Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head.Cool ComfortWhen you're riding, you'll soon be building up body heat. And with it, sweat. And so POC have ensured ventilation is optimised. In fact, they've used wind-tunnel testing to get the airflow just right, so whether going fast or slow, you'll enjoy fresh air over your head. 360-degree Fit SystemIn order to keep the Tectal in place, you’ll find POC’s lightweight 360° fit system. This offers an easy-to-operate and precise fit, ensuring your helmet remains comfortable when riding and stays securely in place in the event of a crash.FeaturesMIPS Integra Head Protection SolutionEPS (Expanded Polystyrene) liner - EPS liner gives optimized protectionUnibody shell construction - unibody Polycarbonate shell enhances the structural integrity of the helmetAramid Bridges - moulded to the helmet liner to enhance structural stability and improve penetration protectionWind-tunnel optimized ventilationExtended protection zones - designed to provide more coverage at temples and back of the headEye garage - securely store sunglasses in the ventilation holes at the backRecco reflector - helps rescue services easily and quickly locate you if something goes wrongAdjustable 360-degree fit systemAdjustable peak - adjusted for personalized protection from the elementsWeight: 385g (M)Certification - EN 1078Shop all MIPS helmets - Click hereBuy POC Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
POC Tectal Race MIPS HelmetDeveloped using POC’s Whole Helmet Concept™, the POC Tectal Race MIPS Helmet deploys the powers of MIPS to keep your head protected on your all-mountain, trail-shredding, enduro-racing, dirt-kicking mountain bike adventures. An advanced all-mountain helmet, the Tectal Race MIPS Helmet feels fantastic to wear when you're enjoying the thrills and heart-pumping exhilaration of going full speed down MTB trails. And should you push your capabilities just a bit too far, the superb range of protective features add safety should you take a tumble. Take on The Trails with ConfidenceThe construction method of the Tectal race is borrowed from POC's groundbreaking Octal road cycling helmet. This sees a tough unibody shell bonded to a shock-absorbing EPS liner. The shell provides durable protection against minor knocks and in the event of a more serious fall enhances structural integrity. An Aramid bridge system, first seen in POC’s proven and award-winning Trabec helmet also allow POC to further enhance structural stability and improve penetration protection.At the core of the helmet is the EPS foam liner. This is the layer that soaks up harder head impacts during a fall. The density and thickness vary in order to optimise protection where it's needed most.The design of the Tectal Race also sees greater coverage specifically tailored for mountain biking. This gives extra protection across the temples and back of the head, so you're covered if you go over the bars or off the back.And if that wasn’t enough, a RECCO® Reflector lets emergency services scan for you should you become lost on a backcountry mountain biking adventure.MIPS Integra Head Protection SolutionThe Tectal Race also features the MIPS Integra system. This brings together POC's 'whole-helmet' safety and design ethos with the fully integrated brain-protecting technology of MIPS. This holistic approach sees every detail of the helmet engineered to work in harmony with each other, giving you new levels of seamless safety, comfort, ventilation, fit and function.MIPS (Multi-directional Impact Protection System) The Mips system is designed to provide added safety for helmets in many accidents. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head.Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head.Cool ComfortWhen you're riding, you'll soon be building up body heat. And with it, sweat. And so POC have ensured ventilation is optimised. In fact, they've used wind-tunnel testing to get the airflow just right, so whether going fast or slow, you'll enjoy fresh air over your head. 360-degree Fit SystemIn order to keep the Tectal in place, you’ll find POC’s lightweight 360° fit system. This offers an easy-to-operate and precise fit, ensuring your helmet remains comfortable when riding and stays securely in place in the event of a crash.FeaturesMIPS Integra Head Protection SolutionEPS (Expanded Polystyrene) liner - EPS liner gives optimized protectionUnibody shell construction - unibody Polycarbonate shell enhances the structural integrity of the helmetAramid Bridges - moulded to the helmet liner to enhance structural stability and improve penetration protectionWind-tunnel optimized ventilationExtended protection zones - designed to provide more coverage at temples and back of the headEye garage - securely store sunglasses in the ventilation holes at the backRecco reflector - helps rescue services easily and quickly locate you if something goes wrongAdjustable 360-degree fit systemAdjustable peak - adjusted for personalized protection from the elementsWeight: 385g (M)Certification - EN 1078Shop all MIPS helmets - Click hereBuy POC Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
POC Tectal Race MIPS HelmetDeveloped using POC’s Whole Helmet Concept™, the POC Tectal Race MIPS Helmet deploys the powers of MIPS to keep your head protected on your all-mountain, trail-shredding, enduro-racing, dirt-kicking mountain bike adventures. An advanced all-mountain helmet, the Tectal Race MIPS Helmet feels fantastic to wear when you're enjoying the thrills and heart-pumping exhilaration of going full speed down MTB trails. And should you push your capabilities just a bit too far, the superb range of protective features add safety should you take a tumble. Take on The Trails with ConfidenceThe construction method of the Tectal race is borrowed from POC's groundbreaking Octal road cycling helmet. This sees a tough unibody shell bonded to a shock-absorbing EPS liner. The shell provides durable protection against minor knocks and in the event of a more serious fall enhances structural integrity. An Aramid bridge system, first seen in POC’s proven and award-winning Trabec helmet also allow POC to further enhance structural stability and improve penetration protection.At the core of the helmet is the EPS foam liner. This is the layer that soaks up harder head impacts during a fall. The density and thickness vary in order to optimise protection where it's needed most.The design of the Tectal Race also sees greater coverage specifically tailored for mountain biking. This gives extra protection across the temples and back of the head, so you're covered if you go over the bars or off the back.And if that wasn’t enough, a RECCO® Reflector lets emergency services scan for you should you become lost on a backcountry mountain biking adventure.MIPS Integra Head Protection SolutionThe Tectal Race also features the MIPS Integra system. This brings together POC's 'whole-helmet' safety and design ethos with the fully integrated brain-protecting technology of MIPS. This holistic approach sees every detail of the helmet engineered to work in harmony with each other, giving you new levels of seamless safety, comfort, ventilation, fit and function.MIPS (Multi-directional Impact Protection System) The Mips system is designed to provide added safety for helmets in many accidents. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head.Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head.Cool ComfortWhen you're riding, you'll soon be building up body heat. And with it, sweat. And so POC have ensured ventilation is optimised. In fact, they've used wind-tunnel testing to get the airflow just right, so whether going fast or slow, you'll enjoy fresh air over your head. 360-degree Fit SystemIn order to keep the Tectal in place, you’ll find POC’s lightweight 360° fit system. This offers an easy-to-operate and precise fit, ensuring your helmet remains comfortable when riding and stays securely in place in the event of a crash.FeaturesMIPS Integra Head Protection SolutionEPS (Expanded Polystyrene) liner - EPS liner gives optimized protectionUnibody shell construction - unibody Polycarbonate shell enhances the structural integrity of the helmetAramid Bridges - moulded to the helmet liner to enhance structural stability and improve penetration protectionWind-tunnel optimized ventilationExtended protection zones - designed to provide more coverage at temples and back of the headEye garage - securely store sunglasses in the ventilation holes at the backRecco reflector - helps rescue services easily and quickly locate you if something goes wrongAdjustable 360-degree fit systemAdjustable peak - adjusted for personalized protection from the elementsWeight: 385g (M)Certification - EN 1078Shop all MIPS helmets - Click hereBuy POC Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
Leatt 4.5 Neck BraceMade to protect your neck in a crash, the Leatt Leatt 4.5 Neck Brace is essential for adding safety when you're taking on the most challenging mountain biking terrain. The 4.5 Neck Brace is engineered to channel crash forces from your helmet to your body, thus isolating your neck from, and reducing, the forces that could otherwise cause neck injuries. It also has a collarbone cut-out to prevent your helmet from impacting your most fragile and vulnerable bones.Leatt's CoreFlex split rear folding thoracic strut gives a perfect fit, allowing optimal freedom of movement but will break away to protect your back from unwanted pressure. The fit is also easily customisable via the two-way adjustability at the rear while the split front dials in more comfort. Easy-to-clean foam padding also gives you extra comfort. Lab and Rider TestedThe 4.5 Neck Brace system has undergone independent lab testing and has been used at the highest level of mountain bike competition. In both cases, it has proven itself to be vital in reducing injury during a crash. This is achieved by transferring the load during an accident away from the fragile bones in the neck.Up to 89% reduction in critical cervical spine injuries*Collarbone injuries up to 45% MORE likely WITHOUT a neck brace*§ *Independent Moto motorcycle study by Action Sports EMSFeatures:Engineered collarbone cut-out to keep your helmet rim away from your most fragile bonesThe optimal helmet rim striking platform is designed to redistribute neck forces and provides the helmet with freedom of movementCoreFlex split rear folding thoracic strut is designed to work with the body's natural movements for a more comfortable fit and break away before applying excessive pressure to the backTwo-way adjustability for the rear to ensure a great fitThe composite matrix platform allows for efficient reduction in neck forcesSculptured, split front for improved comfort and fitInjected, durable and easy-to-clean foam paddingCE tested and certified to the PPE Regulation (EU) 2016/425Weight: from 547g Buy Leatt Protection from Chain Reaction Cycles, the World's Largest Online Bike Store.
Leatt 4.5 Neck BraceMade to protect your neck in a crash, the Leatt Leatt 4.5 Neck Brace is essential for adding safety when you're taking on the most challenging mountain biking terrain. The 4.5 Neck Brace is engineered to channel crash forces from your helmet to your body, thus isolating your neck from, and reducing, the forces that could otherwise cause neck injuries. It also has a collarbone cut-out to prevent your helmet from impacting your most fragile and vulnerable bones.Leatt's CoreFlex split rear folding thoracic strut gives a perfect fit, allowing optimal freedom of movement but will break away to protect your back from unwanted pressure. The fit is also easily customisable via the two-way adjustability at the rear while the split front dials in more comfort. Easy-to-clean foam padding also gives you extra comfort. Lab and Rider TestedThe 4.5 Neck Brace system has undergone independent lab testing and has been used at the highest level of mountain bike competition. In both cases, it has proven itself to be vital in reducing injury during a crash. This is achieved by transferring the load during an accident away from the fragile bones in the neck.Up to 89% reduction in critical cervical spine injuries*Collarbone injuries up to 45% MORE likely WITHOUT a neck brace*§ *Independent Moto motorcycle study by Action Sports EMSFeatures:Engineered collarbone cut-out to keep your helmet rim away from your most fragile bonesThe optimal helmet rim striking platform is designed to redistribute neck forces and provides the helmet with freedom of movementCoreFlex split rear folding thoracic strut is designed to work with the body's natural movements for a more comfortable fit and break away before applying excessive pressure to the backTwo-way adjustability for the rear to ensure a great fitThe composite matrix platform allows for efficient reduction in neck forcesSculptured, split front for improved comfort and fitInjected, durable and easy-to-clean foam paddingCE tested and certified to the PPE Regulation (EU) 2016/425Weight: from 547g Buy Leatt Protection from Chain Reaction Cycles, the World's Largest Online Bike Store.
The HELIX R 12 Speed Cassette is an upgrade to any SRAM Eagle™ drivetrain, with more range than any other cassette on the market. The 9 tooth cog lets you step down one chainring size while keeping the same top end gearing and provides not only better ground clearance, but an overall lighter drivetrain. The aluminium one-piece 42/50 tooth cluster is easily replaceable so riders can keep their steel cluster for multiple seasons and freshen up granny as needed without buying a whole new cassette.It’s in our DNA to solve problems. Helix components are engineered to bridge the compatibility gap between SRAM™ and Shimano™ components, ensuring versatility and flawless performance. Future-proof your bike with e*thirteen Helix.Works flawlessly with Shimano™ and SRAM™ 12s drivetrains despite the challenges in designing for the different cog spacing and chain behavior. Additionally, if your wheel has a SRAM™ XD™ Driver and you want to upgrade to Shimano™ 12s, you not only save money on the cassette, you don’t have to spend the extra on a new hub driver either.Unlike SRAM Eagle™, Helix R cassettes have replaceable gear clusters. That means ongoing service and replacement costs will be less than half that of SRAM™ cassettes. Key Features: 556% More range than any other cassette on the market, 42,50,Weight*: 345g,Compatible with SRAM and Shimano 12speed drivetrains,Improved shifting performance including Shimano™ 12 speed compatibility,Improved interface between steel and aluminium clusters,.
Key Features:A7075 Largest 2 Sprocket,Alloy Spiders, Lockring & Spacers,11-50T [EA5],11-46T [EAZ],Finish - O [Black Chrome] / X [Metallic Silver],Weight - 512g [A5] / 464g [AZ].
This superb model features 11 top-quality sprockets for smooth shifting performance in every gear. Its design consists of an A7075 aluminium larger sprocket and alloy spacers, lockring and spider for outstanding strength and durability on the trails. Additionally, its lightweight profile means you can get up to speed in a flash while not worrying about any excess weight holding you back. This is a perfect choice of a replacement for upgrade for your old or worn-out existing model.
SunRace 11 Speed SRAM XD Mountain Bike CassetteThis tough cassette is specifically designed for MTB as it offers 11 top quality sprockets for smooth shifting performance in every gear. Its superb design consists of an A7075 aluminium larger sprocket and alloy spacers, lockring and spider for phenomenal strength and durability on the trails. Furthermore, its lightweight profile means you can get up to speed quickly without worrying about any excess weight holding you back. This is the ultimate choice of a replacement for your old or worn-out existing model.Features: Material: A7075 Aluminium Use: MTB Speed: 11 speed Smoother shifting performance LightweightBuy SunRace Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The super fast engagement of Vault, now available for your custom wheel builds. Available in Boost and non-Boost, multiple axle standards and Shimano or XD cassette bodies. An oversized hub shell increases torsional and lateral stiffness and proven 6902 bearings were selected due to their large ball diameter and durability. A 60 tooth drive ring alternately engages six double tooth pawls, giving you 3° engagement for near-instant power transfer. Wide bearing placement was designed to decrease load on the bearings, improving lifespan. Protecting these internals are low-drag labyrinth seals designed specifically for the Vault hubs. Finish it off with tool-free endcap swaps and you have a hub that not only moves faster, but adapts faster.Key Features:Boost and Non-Boost Options.,Shimano or XD Cassette Body Available.,6 Pawls with 2 Teeth Each.,120 Points for 3° of Engagement,. Specification:Built for: XC / Trail / Enduro / DH.,Front: 15x110 boost, 15x110 Torque Cap, 15x100, 15x100 Torque Cap, 20x110, 9x100QR.,Cassette body options: Shimano or XD Compatible.,Weight: 177g front,Spoke holes: 32 holes, boost also available in 28 holes..
Abus Gamechanger Road HelmetCycling fast takes good fitness. But if your cycling kit isn't aerodynamically optimised you're wasting precious watts. So starting at the head, the Abus Gamechanger Road Helmet offers a refined and aerodynamically efficient design. And it's outstanding when it comes to your safety too. Fast. In Any Position. The Gamechanger Road Helmet raises the bar when it comes to aerodynamic performance. The Multi-Position Design ensures a smooth flow of air over the helmet, no matter what your head-tilt position. This keeps drag levels as low as possible when you pick up speed. Abus' FlowStraps are also aerodynamically optimised, reducing flapping and fluttering in the wind. There's nothing holding you back with this helmet. Forced Air Cooling TechnologyRiding at speed generates heat. And if you get too hot your performance suffers. However, the Gamechangers overcomes overheating with its Forced Air Cooling Technology. This ventilation system is precisely engineered to enhance airflow across your head while not compromising the aerodynamics. Air is sucked in through front vents, flows along internal channels and exhausts through the back vents. Cool air is drawn in and damp, warm air is ejected, creating a perfect climate and keeping your head cool when intensity and temperatures rise. Safe at SpeedLast, but definitely not least, the Gamechanger provides outstanding protection should you be unfortunate to crash, always a possibility when racing. The multi-shell in-mould design combines a durable outer shell bonded to an EPS foam inner. Should you crash the foam liner absorbs and dissipates impact forces, keeping your head protected from injury. With its Zoom Ace adjustment system, you can also get a comfortable fit every time, and ensure a secure fit that won't move should you fall. Sleek, stylish, protective and cool, the Gamechanger Road Helmet is as good as it gets when it comes to high-level cycling performance. Features:Multi-Position Design: For optimal aerodynamics regardless of head tiltFlowStraps: Aerodynamic, flutter-free and skin-friendly thanks to specially developed strap profileForced Air Cooling Technology: Sophisticated ventilation system for an optimal head climateZoom Ace: Finely adjustable adjustment system with handy adjustment wheel for a customisable fitAirPort: Aerodynamic glasses holder with strap guideMulti Shell In Mold: For safe shock absorptionPonytail compatibility: Helmet well suited to plait wearersWeight:260gBuy Abus Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.