The lightest Dynaplug yet, the Racer Ultralight uses tough glass-reinforced injected nylon construction to get the racer's already low weight down to a barely there 14 grams Also included is a custom silicon holder, tested for a year in the back country of California and the UK, this lightweight mount fits under your bottle cage and holds your racer securely and rattle-freeDynaplug is the fastest, easiest and all-round best way to repair a tubeless tyre mid-ride,When needed, just remove whatever caused the puncture, firmly push the novel insertion tube straight into the hole and extract the tool, depositing the repair plug in the tyre, done!,The sealant-friendly repair plug is a unique viscoelastic impregnated rubber that bonds instantly and permanently with your tyre, and the nonabrasive brass tip will not scratch your rim or puncture your rim tape,No need to remove the tyre, no messy glues or solvents, just plug and go, go, GO!,The double-ended racer holds two preloaded insertion tubes; one with a standard soft nose plug for standard holes and one with an extra-large Megaplug for fixing more serious tyre damage,Each is covered by a waterproof cap, so the plugs are kept ready to go at a moment's notice, even after being strapped to your bike for months,Weighs in at just 23 grams! so even the weeniest of weight weenies have no excuses. The 93 mm length is easy to store in a pocket or strapped to a frame for faster access,A plug tail can be snipped off later if it bothers you; trim to about 4mm long depending on the location,Kit includes the tool itself with both standard and megaplug stainless steel insertion tubes, 2 x Megaplugs and 3 x soft nose standard plugs,Made with pride in the USA with patented technology and warrantied for life under normal usage.
E Thirteen LG1 Race Carbon CranksetThis mountain bike (MTB) crankset features two compacted carbon fibre crankarms for a superior strength to weight ratio as you weave your way from trail to trail. Its carbon build also delivers increased stiffness and strength, without adding any unnecessary excess grams to your ride. Another highlight is e.thirteen has kitted out this model with an additional 3K carbon finish that's added to the front and rear faces for greater impact resistance.Carbon MTB Crankset with Adjustable ChainlineWorld Cup proven for years, and in contrast to e.thirteen's Gen3 carbon cranks, the Q Factor, overall profile, and volume of these Gen4 cranks has been greatly reduced. The spindle has been moved to the non-drive side for easier chainguide setup and drivetrain maintenance. Its adjustable chainline accommodates non-Boost, Boost, and Super Boost setups. Finally, all cranks now include an 8mm self-extractor.Features: Crankarm Material: Carbon Fibre with 3K finish Use: MTB Spindle: Width: 73mm; Diameter 30mm, Interface P3 Connect Compatibility: All frames with 73mm BB shell Compatible Chainring: SL Chainring (-8mm offset) Number of Chainrings: 1 Included: Crankset, APS Adjuster, Installation Tools, Crank Boots (x2), Sticker, User Manual Bottom Bracket Included: No, available separately Chainring Included: No, available separatelyManufacturer's Part Number: E13CR2007 Black 165 x 73mm E13CR2008 Black 170 x 73mm E13CR2009 Black 175 x 73mmBuy E Thirteen Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
E Thirteen Race 35 HandlebarThis mountain bike (MTB) riser handlebar features a lightweight carbon fibre construction that offers optimal stiffness, strength and an overall low weight. This makes it well-equipped for the demands of racing, as it strikes a balance between durability verses weight, giving you tough and dependable steering performance without any excess grams holding you back. Thanks to this model's nine degrees of backsweep, it's also easier on your wrists in comparison to most traditional handlebar bends, so you can enjoy increased comfort and support. With its five degrees of upsweep, it ensures comfort at all angles for a confident hold as you battle for the finish line. One final highlight is its 20mm rise option weighs in at only 225g, and its 35mm rise option weighs in at 230g, making it a lightweight choice of upgrade for your ride.Features: Material: Carbon Fibre Use: MTB Compatibility: 35mm clamp diameter Rise: Multiple options available to select Backsweep: 9 degrees Upsweep: 5 degrees Width: 800mm standard (760mm minimum width) Weight: 20mm Rise Option: 225g; 35mm Rise Option: 230gManufacturer's Part Numbers: E13HB2005 Black 800x20mm E13HB2006 Black 800x35mmBuy E Thirteen Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
E Thirteen Race Mountain Bike Handlebar Decal SetComing equipped with two coloured handlebar decals, two small logo, one medium logo and one large logo sticker, this decal set is a great choice for adding some personalisation and style to your steering set-up. It's specifically designed for use with the e.thirteen Race handlebar and it fits both the 20mm and the 35mm rise versions of the bar. Features: Use: Mountain Bike (MTB) Compatibility: e.thirteen Race Handlebar (20 or 35mm rise) Size: Bar decals approx 80x15mm Included: x2 coloured handlebar decals, x2 small logo, x1 medium logo and x1 large logo stickerManufacturer's Part Number: E13HB2007 Round Red E13HB2008 Petrol Turqoise E13HB2009 Eggplant E13HB2010 Burnt Orange E13HB2011 Doom GreyBuy E Thirteen Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
E Thirteen Race Mountain Bike Handlebar Decal SetComing equipped with two coloured handlebar decals, two small logo, one medium logo and one large logo sticker, this decal set is a great choice for adding some personalisation and style to your steering set-up. It's specifically designed for use with the e.thirteen Race handlebar and it fits both the 20mm and the 35mm rise versions of the bar. Features: Use: Mountain Bike (MTB) Compatibility: e.thirteen Race Handlebar (20 or 35mm rise) Size: Bar decals approx 80x15mm Included: x2 coloured handlebar decals, x2 small logo, x1 medium logo and x1 large logo stickerManufacturer's Part Number: E13HB2007 Round Red E13HB2008 Petrol Turqoise E13HB2009 Eggplant E13HB2010 Burnt Orange E13HB2011 Doom GreyBuy E Thirteen Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
E Thirteen Race Mountain Bike Handlebar Decal SetComing equipped with two coloured handlebar decals, two small logo, one medium logo and one large logo sticker, this decal set is a great choice for adding some personalisation and style to your steering set-up. It's specifically designed for use with the e.thirteen Race handlebar and it fits both the 20mm and the 35mm rise versions of the bar. Features: Use: Mountain Bike (MTB) Compatibility: e.thirteen Race Handlebar (20 or 35mm rise) Size: Bar decals approx 80x15mm Included: x2 coloured handlebar decals, x2 small logo, x1 medium logo and x1 large logo stickerManufacturer's Part Number: E13HB2007 Round Red E13HB2008 Petrol Turqoise E13HB2009 Eggplant E13HB2010 Burnt Orange E13HB2011 Doom GreyBuy E Thirteen Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
E Thirteen TRS Race Carbon Gen4 CranksetFeaturing a trail-rated, compacted carbon fibre crankarm construction, this mountain bike (MTB) crankset offers a fantastic balance of stiffness and durability while also keeping weight to a minimum. e.thirteen has also kitted out its World-Cup DH-rated layup and construction with an additional 3K carbon finish that's added to the front and rear faces for greater impact resistance. This makes it more than ready for tackling the most demanding of terrain conditions as you weave from trail to trail.Trail-Ready MTB Crankset with Adjustable ChainlineIn contrast to e.thirteen's Gen3 carbon cranks, the Q Factor, overall profile, and volume of this Gen4 model has been greatly reduced. The spindle has been moved to the non-drive side for easier chainguide setup and drivetrain maintenance. Its adjustable chainline accommodates non-Boost, Boost, and Super Boost setups. Finally, all cranks now include an 8mm self-extractor.Features: Crankarm Material: Carbon Fibre with 3K Carbon finish Use: MTB Compatible Chainring: SL Chainring (-8mm offset) Number of Chainrings: 1 Compatibility: All frames with 73mm BB Shell Spindle: Width: 73mm; Diameter: 30mm, Interface P3 Connect Q Factor: 178.2mm Included: Crankset, APS Adjuster, Installation Tools, Crank Boots (x2), Sticker, User Manual Bottom Bracket Included: No, available separately Chainring Included: No, available separatelyManufacturer's Part Number: E13CR2010 Black 165 x 73mm E13CR2011 Black 170 x 73mm E13CR2012 Black 175 x 73mmBuy E Thirteen Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
E Thirteen TRS Race/LG1 Race Crank BootsThese replacement crank boots are developed specifically for use with e.thirteen TRS Race and LG1 Race crankarms and for withstanding all of the intensity associated with all-day epics on your favourite trails. Perfect for keeping your expensive carbon cranks protected as you charge through rock gardens, tree roots and debris on your mountain bike (MTB). Comes as a pair. Features: Use: MTB Compatibility: e.thirteen TRS Race/LG1 Race cranks Genuine e.thirteen spare parts Single or Pair: Pair of crank bootsManufacturer's Part Numbers: E13CR2016 Black E13CR2017 Seafoam Green E13CR2018 Bright RedBuy E Thirteen Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
E Thirteen TRS Race/LG1 Race Crank BootsThese replacement crank boots are developed specifically for use with e.thirteen TRS Race and LG1 Race crankarms and for withstanding all of the intensity associated with all-day epics on your favourite trails. Perfect for keeping your expensive carbon cranks protected as you charge through rock gardens, tree roots and debris on your mountain bike (MTB). Comes as a pair. Features: Use: MTB Compatibility: e.thirteen TRS Race/LG1 Race cranks Genuine e.thirteen spare parts Single or Pair: Pair of crank bootsManufacturer's Part Numbers: E13CR2016 Black E13CR2017 Seafoam Green E13CR2018 Bright RedBuy E Thirteen Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
E Thirteen XCX Race Mountain Carbon CranksetThis mountain bike crankset features a 30mm spindle, APS preload adjuster, and self-extractor for bringing class-leading performance to your favourite trails. Engineered for wherever your next mountain bike (MTB) adventure takes you, this model is equipped with compression moulded carbon fibre crankarms for a fantastic balance of stiffness and durability without adding any unnecessary excess grams to your ride. Another benefit of its carbon build is it delivers excellent strength when climbing, and when it's time to descend you'll not have to worry about any weight holding you back. e.thirteen has also combined their years of World Cup racing experience and using a patented process, to make this one of the lightest production carbon crankset on the market, weighing in at only 360g without a chainring - sub 400g with a chainring.Please note: Compatible bottom brackets and chainrings are available separately.Features: Crankarm Material: Compression moulded Carbon Fibre Spindle Material: Aluminium Use: MTB Spindle: Width: 73mm; Diameter: 30mm, Interface P3 Connect Chainring: e.thirteen Direct Mount -5mm Offset Chainring (chainrings sold separately) Q-Factor: 172mm Self Extractor: Yes APS Preload Adjuster: Yes Chainline: 73mm Spindle: Boost (52mm) chainline with UL Chainring; 73mm Spindle: Non-Boost (49mm) chainline with a -8mm Offset Chainring Chainring Compatibility: UL Chainring, and SL Chainring (chainrings sold separately) Bottom Bracket Compatibility: 30mm PressFit Bottom Brackets, and Threaded Bottom Brackets (bottom brackets sold separately) Weight: 360g (approx without chainring)Manufacturer's Part Numbers: E13CR2004 Black 170 x 73mm E13CR2005 Black 175 x 73mmBuy E Thirteen Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
E Thirteen XCX Race Mountain Carbon CranksetThis mountain bike crankset features a 30mm spindle, APS preload adjuster, and self-extractor for bringing class-leading performance to your favourite trails. Engineered for wherever your next mountain bike (MTB) adventure takes you, this model is equipped with compression moulded carbon fibre crankarms for a fantastic balance of stiffness and durability without adding any unnecessary excess grams to your ride. Another benefit of its carbon build is it delivers excellent strength when climbing, and when it's time to descend you'll not have to worry about any weight holding you back. e.thirteen has also combined their years of World Cup racing experience and using a patented process, to make this one of the lightest production carbon crankset on the market, weighing in at only 360g without a chainring - sub 400g with a chainring.Please note: Compatible bottom brackets and chainrings are available separately.Features: Crankarm Material: Compression moulded Carbon Fibre Spindle Material: Aluminium Use: MTB Spindle: Width: 73mm; Diameter: 30mm, Interface P3 Connect Chainring: e.thirteen Direct Mount -5mm Offset Chainring (chainrings sold separately) Q-Factor: 172mm Self Extractor: Yes APS Preload Adjuster: Yes Chainline: 73mm Spindle: Boost (52mm) chainline with UL Chainring; 73mm Spindle: Non-Boost (49mm) chainline with a -8mm Offset Chainring Chainring Compatibility: UL Chainring, and SL Chainring (chainrings sold separately) Bottom Bracket Compatibility: 30mm PressFit Bottom Brackets, and Threaded Bottom Brackets (bottom brackets sold separately) Weight: 360g (approx without chainring)Manufacturer's Part Numbers: E13CR2004 Black 170 x 73mm E13CR2005 Black 175 x 73mmBuy E Thirteen Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
e*spec wheels use a custom hub that increased dynamic load ratings by 53%, and decreased axle deflection by 37%.All of our e*spec wheels can be used on any regular non-eBike. Wheelsets can be mixed or matched for either full 27.5+, full 29, or jump on the #mulletbus.The (IW28) internal width 28mm wheelset comes in at only 1,520g and better suits trail riders using slightly larger tyres. Key Features: Axle: 110 x 15mm,Drilling: 28h,Material: World Cup Developed Carbon,Spokes: Custom J-bend, triple-butted spokes w/alloy nipples and nipple washers,Included: spoke x3, nipple x3, nipple washer x3,, Width: 35mm internal width.