SRAM HYDRAULIC DISC BRAKE S900 AERO HYDROT LEFT FRONT BRAKE 950MM FLAT MOUNT 20MM OFFSET (ROTOR & BRAKET SOLD SEPARATELY)
Fulcrum Rapid Red 5 DB WheelsetA high-quality set of gravel bike wheels for the adventurous road rider, this Rapid Red 5 pair by Fulcrum is perfect for tackling tough terrain. Featuring disc brake braking for enhanced control, they're ready to take on gravel ground, bikepacking trips and unpaved pathways. Made from durable aluminium, each rim uses its 23mm-width to bring balance and stability to the most arduous journeys, letting you ride everywhere with the utmost confidence.Rapid-Rolling, Aluminium-Made, Gravel WheelsetThe 24mm height of the rim also cushions the wheel against the impacts of rough surface riding, while the Two-Way-Fit tubeless-ready design enhances puncture protection and cornering grip when running lower tyre pressures. Spinning smoothly and steadily on aluminium hubs, this durable and dependable wheelset maintains a consistent motion across tough terrains, with a fast-engaging freehub to push you on with improved power and pace.With 24 straight-pull spokes strengthening the wheels for the tribulations of rough and tumble road riding, this Rapid Red 5 wheelset is the perfect choice for the roads and routes less travelled.Features:Rim Material: AluminiumRim Depth: 24mmExternal Rim Width: 28mmInternal Rim Width: 23mmBrake Type: Disc BrakeSpoke Material: AluminiumSpoke Type: Aluminium, rounded, straight-pullSpoke Count: 24Nipple Material: AluminiumTubeless Ready: Yes, Two-Way-FitTyre Type: ClincherHub Material: Aluminium with Aluminium flangesFreehub: Shimano or SRAM XDAxle Compatibility: Front: HH15-100/HH12-100; Rear: HH12-142Weight: 1760gWeight Limit: 120kgBuy Fulcrum Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
CeramicSpeed ITA SRAM DUB Bottom BracketCeramicSpeed is the market leader in high-end performance components. This Ceramic Bottom Bracket delivers excellent low bearing friction with superb durability. Unique CeramicSpeed ceramic bearings are premium quality, out-performing mark rivals. The CeramicSpeed Ceramic Bottom Bracket system is so stiff and efficient that additional spacers are not required. At a fantastically lightweight of 84 grams, this CeramicSpeed Ceramic Bottom Bracket is a premium upgrade that your trusty steed deserves.Features: Material: Ceramic Bearings, Aluminium (cups) Use with SRAM DUB cranksets Weight: 84gBuy CeramicSpeed Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
If your ride doesn’t feel complete until you get a little dirt on your tires, you know the importance of capable components that can tackle anything. The Rival XPLR eTap AXS rear derailleur is a dedicated 1x-specific unit designed for use with the XPLR 10-44 cassette. It makes for an uncluttered drivetrain that takes on pavement and singletrack with equal aplomb. Wireless and proven eTap shift logic, AXS connectivity and advanced chain management mean this derailleur does exactly what you want when you need it.Key Features:Wireless electronic eTap shift logic for intuitive shifting, easy setup and reliability,1x specific for use with 10-44 XPLR and 10-36 cassettes,SRAM AXS™ enabled, allowing easy personalization,Chain management keeps the drivetrain quiet and secure,Larger X-SYNC™ pulleys for increased durability and efficiency,Compatible with existing eTap® batteries.
Sometimes all you need is a fresh coat of paint. With revised graphics to match SRAM RED eTap components, the PowerdomeX is still the most advanced cassette ever made. It's super light, deadly silent and delivers an undeniable performance advantage. The nine cogs in the cog cluster are machined from a single block of high grade tool steel, increasing stiffness while weighing even less than a titanium cassette. Between each cog is a StealthRing elastomer to reduce vibration and noise. Cutouts on the rear cog further reduce weight and add stiffness. It's the final piece in the drivetrain puzzle, and paired with the new SRAM Red rear derailleur, it delivers ultra-fast, ultra-quiet shifts that will always put you in the right gear.Technology Highlights: PowerdomeX, X-Glide Cogs, StealthRingsWeight: 151g (11-25)Speeds: 11-Speed
SRAM XG-899 E-Block MTB CassetteSRAM's XG-899 E-Block MTB Cassette is part of the new EX1 eBike specific drivetrain and has been specifically designed for the extra torque and demands of electric MTB bikes.The XG-899 features larger steps between the sprockets, which is a completely new technology that has been designed to optimise the power output of your electric off road bike. The individual cogs architecture has been engineered to work with the chains inner and outer links, giving you extremely refined inboard and outboard shifting.It is manufactured from case-hardened tool steel that ensures mile after mile of durable and consistent performance. Features: Gear Ratios: 11-48T Speed: 8-Speed Ideal mid-ship motor gear range Increased chain wrap on climbing cogs Symmetric shifting geometry allows fast, precise gear shifts Recommended Chain: Eagle chain compatible only Recommended Group: GX DH Cogs: 11,13,15,18,24,32,40,48 Compatibility: Non XD driver body compatibleBuy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM G2 Ultimate Disc BrakeReady for fast and fun rides, this mountain bike (MTB) hydraulic disc brake features a tough build combined with proven SRAM technologies for conquering the demands of modern day trail-riding. Featuring a high-quality carbon lever blade with a forged aluminium lever body and caliper, this model offers a perfect balance of strength and durability without weighing down your ride with unnecessary weight. Coming kitted out with more caliper stiffness and an updated pad compound with bite, it also includes many of SRAM's finest technologies, so it's ready to deliver dependable performance wherever your next adventure takes you.Every trail and every rider is unique. To meet the infinite variables SRAM created the G2: powerful, consistent, reliable. SRAM obsessed over heat management, modulation, materials and design. They made lever-reach and contact points adjustable to fit every hand. And they tested the whole system to ensure it delivers confidence-inspiring performance and control, every ride.For the Ultimate, SRAM held nothing back. Its engineers sculpted the finest materials using titanium and carbon fibre to make this the brand's lightest four-piston brake ever. Power, modulation and lever feel set a new standard. Personalisation is quick and intuitive. And for performance, its test riders didn't dub it the "Mini-Code" for nothing.Features: Lever Blade Material: Carbon Lever Body Material: Forged Aluminium Caliper Body Material: Forged Aluminium Caliper Hardware Material: Titanium Piston Material: Phenolic Plastic Use: MTB Brake Type: Hydraulic disc brake Pad Type: Steel-backed Organic Bracket Type: Direct Mount DIR Bracket Included: No, available separately Number of Pistons: 4 Recommended Rotor Type: 1-piece CentreLine Rotor Compatibility: Front Option: 200mm; Rear Option: 180mm Rotor Included: No, available separately Clamp Included: Yes, MMX Clamp Hose Routing: Adjustable banjo Contact Adjust: Yes Caliper Construction: 2-piece Caliper Bleed Port: Bleeding Edge Hydraulic Fluid: DOT 5.1 Lever Pivot: Bearing Reach Adjust: Tool-free Hose Length: Front Option: 950mm; Rear Option: 2000mm Included: x1 Brake lever, x1 caliper and x1 MMX clamp (rotor/bracket sold separately) Single or Pair: SingleTechnologies: Bleeding Edge: With this revised caliper fluid circuitry, the bleed port has been moved to the bottom of the caliper, and all four piston bores can communicate. This way, during bleeding fluid naturally fills the caliper, resulting in an easier, more consistent bleed. Contact Point Adjustment: Some people like the instantaneous power of a short lever throw. Others prefer the feel of a longer throw. With Contact Point Adjust, you can pick the position you want your fingers to be in when your brakes are engaged. It’s a quick and easy way to customise the feel of your brakes without having to move the pads. It’s also a way to balance both brake levers to feel exactly the same. Lever Pivot Bearings: Precision sealed bearings at the lever pivot enhance the clean, crisp lever actuation and consistent, light, one-finger feel. Power Reserve Geometry: Your fingers pull in a straight line, but brake levers move in an arc. Bottom line: Your fingers typically want to slip off the ends of the levers as you pull. SRAM designed all of its brakes with the industry's lowest X Factor (that's the distance from the centre of the handlebar to the centre of the lever's pivot). That reduces the lever's inward travel, creating an arc that's closer to your fingers' natural motion and more power is delivered to the brake lever. And, the cool part is, every SRAM and Avid brake lever has it. S4 Lightweight 4-Piston Caliper: The S4 Caliper features four Machined and Moly-coated aluminium pistons for consistent rollback and easy set-up, Heat shield insulation and Bleeding Edge porting and adaptor technology for easy bleeds. Swinglink: Squeeze a SRAM brake lever and you notice it immediately. Less deadband. More positive engagement. A new cam system requires less lever throw to push the pads toward the rotor. That’s great, but there’s more to perfect braking performance than just power. You need control. Many brake systems minimise deadband—but at the cost of modulation. SwingLink solves that with its special cam shape. When the pads contact the rotor, the leverage rate curve is flat and smooth, avoiding that “on/off” brake feel. It’s the perfect balance of power and precision. Timing Port Closure: A hydraulic brake’s timing port is the connection between the reservoir and the lever cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port, which pressurizes the system. SRAM’s timing port closure system features durable seals and an ultra-smooth cylinder bore finish producing dependable braking power and consistency. Mini-Code Power: Code set the benchmark for braking power — and won a few championships, too. G2 brings it to the trail. SRAM call it “Mini-Code.”Manufacturer's Part Number: 00.5018.160.000 Polar Grey 950mm Front RH 00.5018.160.001 Polar Grey 2000mm Rear LH 00.5018.160.002 Gloss Black 950mm Front RH 00.5018.160.003 Gloss Black 2000mm Rear LH 00.5018.160.004 Multi Black/Rainbow 950mm Front RH 00.5018.160.005 Multi Black/Rainbow 2000mm Rear LHBuy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM G2 Ultimate Disc BrakeReady for fast and fun rides, this mountain bike (MTB) hydraulic disc brake features a tough build combined with proven SRAM technologies for conquering the demands of modern day trail-riding. Featuring a high-quality carbon lever blade with a forged aluminium lever body and caliper, this model offers a perfect balance of strength and durability without weighing down your ride with unnecessary weight. Coming kitted out with more caliper stiffness and an updated pad compound with bite, it also includes many of SRAM's finest technologies, so it's ready to deliver dependable performance wherever your next adventure takes you.Every trail and every rider is unique. To meet the infinite variables SRAM created the G2: powerful, consistent, reliable. SRAM obsessed over heat management, modulation, materials and design. They made lever-reach and contact points adjustable to fit every hand. And they tested the whole system to ensure it delivers confidence-inspiring performance and control, every ride.For the Ultimate, SRAM held nothing back. Its engineers sculpted the finest materials using titanium and carbon fibre to make this the brand's lightest four-piston brake ever. Power, modulation and lever feel set a new standard. Personalisation is quick and intuitive. And for performance, its test riders didn't dub it the "Mini-Code" for nothing.Features: Lever Blade Material: Carbon Lever Body Material: Forged Aluminium Caliper Body Material: Forged Aluminium Caliper Hardware Material: Titanium Piston Material: Phenolic Plastic Use: MTB Brake Type: Hydraulic disc brake Pad Type: Steel-backed Organic Bracket Type: Direct Mount DIR Bracket Included: No, available separately Number of Pistons: 4 Recommended Rotor Type: 1-piece CentreLine Rotor Compatibility: Front Option: 200mm; Rear Option: 180mm Rotor Included: No, available separately Clamp Included: Yes, MMX Clamp Hose Routing: Adjustable banjo Contact Adjust: Yes Caliper Construction: 2-piece Caliper Bleed Port: Bleeding Edge Hydraulic Fluid: DOT 5.1 Lever Pivot: Bearing Reach Adjust: Tool-free Hose Length: Front Option: 950mm; Rear Option: 2000mm Included: x1 Brake lever, x1 caliper and x1 MMX clamp (rotor/bracket sold separately) Single or Pair: SingleTechnologies: Bleeding Edge: With this revised caliper fluid circuitry, the bleed port has been moved to the bottom of the caliper, and all four piston bores can communicate. This way, during bleeding fluid naturally fills the caliper, resulting in an easier, more consistent bleed. Contact Point Adjustment: Some people like the instantaneous power of a short lever throw. Others prefer the feel of a longer throw. With Contact Point Adjust, you can pick the position you want your fingers to be in when your brakes are engaged. It’s a quick and easy way to customise the feel of your brakes without having to move the pads. It’s also a way to balance both brake levers to feel exactly the same. Lever Pivot Bearings: Precision sealed bearings at the lever pivot enhance the clean, crisp lever actuation and consistent, light, one-finger feel. Power Reserve Geometry: Your fingers pull in a straight line, but brake levers move in an arc. Bottom line: Your fingers typically want to slip off the ends of the levers as you pull. SRAM designed all of its brakes with the industry's lowest X Factor (that's the distance from the centre of the handlebar to the centre of the lever's pivot). That reduces the lever's inward travel, creating an arc that's closer to your fingers' natural motion and more power is delivered to the brake lever. And, the cool part is, every SRAM and Avid brake lever has it. S4 Lightweight 4-Piston Caliper: The S4 Caliper features four Machined and Moly-coated aluminium pistons for consistent rollback and easy set-up, Heat shield insulation and Bleeding Edge porting and adaptor technology for easy bleeds. Swinglink: Squeeze a SRAM brake lever and you notice it immediately. Less deadband. More positive engagement. A new cam system requires less lever throw to push the pads toward the rotor. That’s great, but there’s more to perfect braking performance than just power. You need control. Many brake systems minimise deadband—but at the cost of modulation. SwingLink solves that with its special cam shape. When the pads contact the rotor, the leverage rate curve is flat and smooth, avoiding that “on/off” brake feel. It’s the perfect balance of power and precision. Timing Port Closure: A hydraulic brake’s timing port is the connection between the reservoir and the lever cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port, which pressurizes the system. SRAM’s timing port closure system features durable seals and an ultra-smooth cylinder bore finish producing dependable braking power and consistency. Mini-Code Power: Code set the benchmark for braking power — and won a few championships, too. G2 brings it to the trail. SRAM call it “Mini-Code.”Manufacturer's Part Number: 00.5018.160.000 Polar Grey 950mm Front RH 00.5018.160.001 Polar Grey 2000mm Rear LH 00.5018.160.002 Gloss Black 950mm Front RH 00.5018.160.003 Gloss Black 2000mm Rear LH 00.5018.160.004 Multi Black/Rainbow 950mm Front RH 00.5018.160.005 Multi Black/Rainbow 2000mm Rear LHBuy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM G2 Ultimate Disc BrakeReady for fast and fun rides, this mountain bike (MTB) hydraulic disc brake features a tough build combined with proven SRAM technologies for conquering the demands of modern day trail-riding. Featuring a high-quality carbon lever blade with a forged aluminium lever body and caliper, this model offers a perfect balance of strength and durability without weighing down your ride with unnecessary weight. Coming kitted out with more caliper stiffness and an updated pad compound with bite, it also includes many of SRAM's finest technologies, so it's ready to deliver dependable performance wherever your next adventure takes you.Every trail and every rider is unique. To meet the infinite variables SRAM created the G2: powerful, consistent, reliable. SRAM obsessed over heat management, modulation, materials and design. They made lever-reach and contact points adjustable to fit every hand. And they tested the whole system to ensure it delivers confidence-inspiring performance and control, every ride.For the Ultimate, SRAM held nothing back. Its engineers sculpted the finest materials using titanium and carbon fibre to make this the brand's lightest four-piston brake ever. Power, modulation and lever feel set a new standard. Personalisation is quick and intuitive. And for performance, its test riders didn't dub it the "Mini-Code" for nothing.Features: Lever Blade Material: Carbon Lever Body Material: Forged Aluminium Caliper Body Material: Forged Aluminium Caliper Hardware Material: Titanium Piston Material: Phenolic Plastic Use: MTB Brake Type: Hydraulic disc brake Pad Type: Steel-backed Organic Bracket Type: Direct Mount DIR Bracket Included: No, available separately Number of Pistons: 4 Recommended Rotor Type: 1-piece CentreLine Rotor Compatibility: Front Option: 200mm; Rear Option: 180mm Rotor Included: No, available separately Clamp Included: Yes, MMX Clamp Hose Routing: Adjustable banjo Contact Adjust: Yes Caliper Construction: 2-piece Caliper Bleed Port: Bleeding Edge Hydraulic Fluid: DOT 5.1 Lever Pivot: Bearing Reach Adjust: Tool-free Hose Length: Front Option: 950mm; Rear Option: 2000mm Included: x1 Brake lever, x1 caliper and x1 MMX clamp (rotor/bracket sold separately) Single or Pair: SingleTechnologies: Bleeding Edge: With this revised caliper fluid circuitry, the bleed port has been moved to the bottom of the caliper, and all four piston bores can communicate. This way, during bleeding fluid naturally fills the caliper, resulting in an easier, more consistent bleed. Contact Point Adjustment: Some people like the instantaneous power of a short lever throw. Others prefer the feel of a longer throw. With Contact Point Adjust, you can pick the position you want your fingers to be in when your brakes are engaged. It’s a quick and easy way to customise the feel of your brakes without having to move the pads. It’s also a way to balance both brake levers to feel exactly the same. Lever Pivot Bearings: Precision sealed bearings at the lever pivot enhance the clean, crisp lever actuation and consistent, light, one-finger feel. Power Reserve Geometry: Your fingers pull in a straight line, but brake levers move in an arc. Bottom line: Your fingers typically want to slip off the ends of the levers as you pull. SRAM designed all of its brakes with the industry's lowest X Factor (that's the distance from the centre of the handlebar to the centre of the lever's pivot). That reduces the lever's inward travel, creating an arc that's closer to your fingers' natural motion and more power is delivered to the brake lever. And, the cool part is, every SRAM and Avid brake lever has it. S4 Lightweight 4-Piston Caliper: The S4 Caliper features four Machined and Moly-coated aluminium pistons for consistent rollback and easy set-up, Heat shield insulation and Bleeding Edge porting and adaptor technology for easy bleeds. Swinglink: Squeeze a SRAM brake lever and you notice it immediately. Less deadband. More positive engagement. A new cam system requires less lever throw to push the pads toward the rotor. That’s great, but there’s more to perfect braking performance than just power. You need control. Many brake systems minimise deadband—but at the cost of modulation. SwingLink solves that with its special cam shape. When the pads contact the rotor, the leverage rate curve is flat and smooth, avoiding that “on/off” brake feel. It’s the perfect balance of power and precision. Timing Port Closure: A hydraulic brake’s timing port is the connection between the reservoir and the lever cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port, which pressurizes the system. SRAM’s timing port closure system features durable seals and an ultra-smooth cylinder bore finish producing dependable braking power and consistency. Mini-Code Power: Code set the benchmark for braking power — and won a few championships, too. G2 brings it to the trail. SRAM call it “Mini-Code.”Manufacturer's Part Number: 00.5018.160.000 Polar Grey 950mm Front RH 00.5018.160.001 Polar Grey 2000mm Rear LH 00.5018.160.002 Gloss Black 950mm Front RH 00.5018.160.003 Gloss Black 2000mm Rear LH 00.5018.160.004 Multi Black/Rainbow 950mm Front RH 00.5018.160.005 Multi Black/Rainbow 2000mm Rear LHBuy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM G2 Ultimate Disc BrakeReady for fast and fun rides, this mountain bike (MTB) hydraulic disc brake features a tough build combined with proven SRAM technologies for conquering the demands of modern day trail-riding. Featuring a high-quality carbon lever blade with a forged aluminium lever body and caliper, this model offers a perfect balance of strength and durability without weighing down your ride with unnecessary weight. Coming kitted out with more caliper stiffness and an updated pad compound with bite, it also includes many of SRAM's finest technologies, so it's ready to deliver dependable performance wherever your next adventure takes you.Every trail and every rider is unique. To meet the infinite variables SRAM created the G2: powerful, consistent, reliable. SRAM obsessed over heat management, modulation, materials and design. They made lever-reach and contact points adjustable to fit every hand. And they tested the whole system to ensure it delivers confidence-inspiring performance and control, every ride.For the Ultimate, SRAM held nothing back. Its engineers sculpted the finest materials using titanium and carbon fibre to make this the brand's lightest four-piston brake ever. Power, modulation and lever feel set a new standard. Personalisation is quick and intuitive. And for performance, its test riders didn't dub it the "Mini-Code" for nothing.Features: Lever Blade Material: Carbon Lever Body Material: Forged Aluminium Caliper Body Material: Forged Aluminium Caliper Hardware Material: Titanium Piston Material: Phenolic Plastic Use: MTB Brake Type: Hydraulic disc brake Pad Type: Steel-backed Organic Bracket Type: Direct Mount DIR Bracket Included: No, available separately Number of Pistons: 4 Recommended Rotor Type: 1-piece CentreLine Rotor Compatibility: Front Option: 200mm; Rear Option: 180mm Rotor Included: No, available separately Clamp Included: Yes, MMX Clamp Hose Routing: Adjustable banjo Contact Adjust: Yes Caliper Construction: 2-piece Caliper Bleed Port: Bleeding Edge Hydraulic Fluid: DOT 5.1 Lever Pivot: Bearing Reach Adjust: Tool-free Hose Length: Front Option: 950mm; Rear Option: 2000mm Included: x1 Brake lever, x1 caliper and x1 MMX clamp (rotor/bracket sold separately) Single or Pair: SingleTechnologies: Bleeding Edge: With this revised caliper fluid circuitry, the bleed port has been moved to the bottom of the caliper, and all four piston bores can communicate. This way, during bleeding fluid naturally fills the caliper, resulting in an easier, more consistent bleed. Contact Point Adjustment: Some people like the instantaneous power of a short lever throw. Others prefer the feel of a longer throw. With Contact Point Adjust, you can pick the position you want your fingers to be in when your brakes are engaged. It’s a quick and easy way to customise the feel of your brakes without having to move the pads. It’s also a way to balance both brake levers to feel exactly the same. Lever Pivot Bearings: Precision sealed bearings at the lever pivot enhance the clean, crisp lever actuation and consistent, light, one-finger feel. Power Reserve Geometry: Your fingers pull in a straight line, but brake levers move in an arc. Bottom line: Your fingers typically want to slip off the ends of the levers as you pull. SRAM designed all of its brakes with the industry's lowest X Factor (that's the distance from the centre of the handlebar to the centre of the lever's pivot). That reduces the lever's inward travel, creating an arc that's closer to your fingers' natural motion and more power is delivered to the brake lever. And, the cool part is, every SRAM and Avid brake lever has it. S4 Lightweight 4-Piston Caliper: The S4 Caliper features four Machined and Moly-coated aluminium pistons for consistent rollback and easy set-up, Heat shield insulation and Bleeding Edge porting and adaptor technology for easy bleeds. Swinglink: Squeeze a SRAM brake lever and you notice it immediately. Less deadband. More positive engagement. A new cam system requires less lever throw to push the pads toward the rotor. That’s great, but there’s more to perfect braking performance than just power. You need control. Many brake systems minimise deadband—but at the cost of modulation. SwingLink solves that with its special cam shape. When the pads contact the rotor, the leverage rate curve is flat and smooth, avoiding that “on/off” brake feel. It’s the perfect balance of power and precision. Timing Port Closure: A hydraulic brake’s timing port is the connection between the reservoir and the lever cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port, which pressurizes the system. SRAM’s timing port closure system features durable seals and an ultra-smooth cylinder bore finish producing dependable braking power and consistency. Mini-Code Power: Code set the benchmark for braking power — and won a few championships, too. G2 brings it to the trail. SRAM call it “Mini-Code.”Manufacturer's Part Number: 00.5018.160.000 Polar Grey 950mm Front RH 00.5018.160.001 Polar Grey 2000mm Rear LH 00.5018.160.002 Gloss Black 950mm Front RH 00.5018.160.003 Gloss Black 2000mm Rear LH 00.5018.160.004 Multi Black/Rainbow 950mm Front RH 00.5018.160.005 Multi Black/Rainbow 2000mm Rear LHBuy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Go further with the SRAM Force® 43/30 wide crankset. Its 43/30 chainrings encourage exploring the most challenging routes on the newest crop of versatile and fun drop bar bikes. Shifting is smooth, accurate, and dependable using our proven X-Range™ gearing based around a tight 13-tooth difference between the small and big rings. The wider stance of the chainrings provides clearance for extra wide tires, giving you the option to explore new, more challenging routes.Features:X-Range™ gearing technology gives you more range and a smoother gear progression, so you’re always in the right gear,Crisp and accurate front shifts,Wide chainline crankset for bikes with up to 700x45c or 27.5x2.1” tire widths (43/30 chainrings only),Longer DUB crank spindle accommodates both Road and MTB width frame bottom bracket standards for unmatched cross-compatibility across brands,Requires Force wide front derailleur,DUB™ bottom bracket adds durability and simplicity.SPECIFICATIONSSpeeds: 12,BB Compatibility: All SRAM Road DUB BBs,Chainring Size: 43/30,Crank arm length: 165mm, 167.5mm, 170mm, 172.5mm, 175mm, 177.5mm,Chainline: 47.5mm,BB Spindle Interface: DUB,Chainring material: Aluminum,Guard: No Guard,Bolt Circle Diameter (BCD): 94 BCD,Crank arm material: Carbon,Color (Crank arm): Natural carbon.
Specifications:Speed (RD): 12s,Cable pull ratio: X-actuation,Cage (RD): n/a,Max tooth: 52,Color (RD): Red, Lunar,Pulley bearings material: n/a,Cage material (RD): n/a.