SRAM Alloy GXP Road/MTB Bottom BracketSuitable for road or mountain bike use, this SRAM bottom bracket is equipped with Gutter Seal technology, which significantly improves protection from wet weather and reduces drag on the seals. SRAM has given it a revised, cleaner look with its redesigned, forged cup. The SRAM Alloy GXP Bottom Bracket brings a new standard in external bearing performance as the custom steel bearings, sealed cartridge bearings, and tungsten finish offer a high-end, reliable bottom bracket.Features: Use: Road or MTB Compatible with SRAM and Truvativ chainsets only Gutter Seal technology Improved tool engagementSealed cartridge bearingsCustom steel bearingsTungsten finish Compatibility (check your bike's frame first):68/73mm for most MTBs, 83mm for many Downhill bikes, 70mm for many Italian road bikesTechnologies:GXP: Giga X Pipe External Bottom Bracket Bearing Assembly. While other systems rely on side loading the bearings to eliminate play, which causes premature bearing wear, the GXP system is different. The GXP system captures the left side bearing between the spindle and the left crank arm while allowing the drive-side bearing to float axially on the spindle, thereby eliminating the necessity to side-load bearings during adjustment. The simplicity of installation is refined: once it is tightened to the proper specifications you are ready to roll with a worry free BB. The GXP system uses two bicycle specific cartridge bearings and eight seals for a smooth and long-lasting ride.Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM PressFit 30 to BSA Adaptor KitGenuine SRAM bottom bracket convertor. Designed to convert a PressFit 30 BB shell to a traditional BSA thread.Features:Polymer cupsSet includes left- and right-hand cupsSealed cups keep out dirt and waterMaintenance freeCompatible with 68/73mm shells46mm cup diameterBSA inner ThreadEasy press-fit installationBicycle bottom brackets connect the cranks to the bike and allow the crank arms to rotate. There are various sizes of bottom bracket shell on the market, so compatibility needs to be checked. The three most common frame bottom bracket shell widths are 68mm (English threaded road and mtb), 70mm (Italian threaded road) and 73mm (British threaded mtb). There are also many axle shapes and styles, from JIS or ISO square tapers through to the round splined axles such as ISIS or Octalink and then there is the new external cup systems which have the axle built into the crank arms. Some frames are now using the new BB30 system which uses bearings pushed directly into the frame and removes the needs for cups to be threaded into the frame.
SRAM PressFit GXP Bottom BracketEnabling you to use SRAM or Truvativ GXP chainsets frames with pressfit bottom bracket shells, this bottom bracket reduces drag to make the most of your pedalling effort. The smooth operation is due to the fully sealed steel cartridge bearings, which has a tungsten finish to increase durability.Reasons to Buy: Reduces drag. Allows you to make the most out of your pedalling effort. Smooth operation. Fully sealed Steel cartridge bearings.Features: Type: PressFit (BB86 or BB92) Suits BB Shell Size: 41x86mm or 41x92mm Bearing Type: Sealed Cartridge Bearings Steel bearings with Tungsten finish Compatible with SRAM and Truvativ GXP chainsets only Weight: 89g (BB92)Manufacturer Reference Codes: 92mm - MTB: 00.6415.033.020; 86mm - Road: 00.6415.033.000Technologies: GXP: Other systems rely on side-loaded bearings to eliminate play, causing bearing wear. GXP captures the left-side bearing between the spindle and the left crankarm and allows the drive-side bearing to float axially on the spindle. There's no need to side-load bearings during adjustment. No excess wear and much simpler installation. Just tighten to the proper specifications and you're ready to roll, worry-free. GXP's two bicycle-specific cartridge bearings and eight seals ensure a smooth, long-lasting ride. SRAM's Gutter seal system takes a two-stage approach in directing contaminates away from the bearings providing longer bearing life. GXP’s Gutter Seal design also reduces friction, 35% less drag than previous versions, improving rider feel and performance. Gutter seal system has deeper installation tool grooves which provide stability and support while applying torque to the adapter cups. SRAM'S design and material choice have dropped 15g out.Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM PressFit GXP Bottom BracketEnabling you to use SRAM or Truvativ GXP chainsets frames with pressfit bottom bracket shells, this bottom bracket reduces drag to make the most of your pedalling effort. The smooth operation is due to the fully sealed steel cartridge bearings, which has a tungsten finish to increase durability.Reasons to Buy: Reduces drag. Allows you to make the most out of your pedalling effort. Smooth operation. Fully sealed Steel cartridge bearings.Features: Type: PressFit (BB86 or BB92) Suits BB Shell Size: 41x86mm or 41x92mm Bearing Type: Sealed Cartridge Bearings Steel bearings with Tungsten finish Compatible with SRAM and Truvativ GXP chainsets only Weight: 89g (BB92)Manufacturer Reference Codes: 92mm - MTB: 00.6415.033.020; 86mm - Road: 00.6415.033.000Technologies: GXP: Other systems rely on side-loaded bearings to eliminate play, causing bearing wear. GXP captures the left-side bearing between the spindle and the left crankarm and allows the drive-side bearing to float axially on the spindle. There's no need to side-load bearings during adjustment. No excess wear and much simpler installation. Just tighten to the proper specifications and you're ready to roll, worry-free. GXP's two bicycle-specific cartridge bearings and eight seals ensure a smooth, long-lasting ride. SRAM's Gutter seal system takes a two-stage approach in directing contaminates away from the bearings providing longer bearing life. GXP’s Gutter Seal design also reduces friction, 35% less drag than previous versions, improving rider feel and performance. Gutter seal system has deeper installation tool grooves which provide stability and support while applying torque to the adapter cups. SRAM'S design and material choice have dropped 15g out.Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM SuperSuede Bar TapeThe perfect way to finish off your SRAM-equipped road or gravel bike in style, this SuperSuede Bar Tape offers you lasting comfort even without gloves. Coming complete with matching SRAM bar end plugs, it feels soft to the touch and will enhance the looks of modern and classic bikes alike.Features:Single or Pair: Pair (enough length for all drop bar sizes)Gel or Tape: TapeBar End Plugs Included: YesGrippy feel with a light suede finish Available in a range of colour options Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM SuperSuede Bar TapeThe perfect way to finish off your SRAM-equipped road or gravel bike in style, this SuperSuede Bar Tape offers you lasting comfort even without gloves. Coming complete with matching SRAM bar end plugs, it feels soft to the touch and will enhance the looks of modern and classic bikes alike.Features:Single or Pair: Pair (enough length for all drop bar sizes)Gel or Tape: TapeBar End Plugs Included: YesGrippy feel with a light suede finish Available in a range of colour options Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM X01 Eagle MTB Grip Shift Gear ShifterThe SRAM Grip Shift is built on the idea of making shifting easier and more intuitive. The modern version of this shifter houses some of the most advanced and reliable mechanical shifting technology available.Durability and ControlThe new robust internals make the shifting performance even more precise and extremely smooth when shifting between gears in all weather conditions. Rolling Thunder technology evenly spaces the load beneath the Grip Shift when rotating, meaning gear changes are crisp and smooth.Features: Material: Aluminium Composite Compatibility: Eagle rear derailleur's Recommended Group: X01 Eagle Speed: 12-speed Weight: 221gKey Technologies: Jaws: Once the Grip Shift shifter and grip interlock securely, forged aluminium clamps on either end reinforce the assembly by locking tightly to handlebar. Rolling Thunder: Three rows of ball bearings provide zero friction or play, reducing the force needed to shift and promoting long-term performance under all weather conditions. Speed Metal: Full metal indexing keeps shifting crisp and precise with Grip Shift. X-Actuation: Developed specifically for SRAM 1x, X-ACTUATION keeps shifting sharp and consistent across the entire cassette.Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM Ultimate-Shorty Brake Shoes and PadsThis top-quality kit includes a brake shoe and pads which are specifically designed to fit your SRAM Ultimate Lever road brakes. Additionally, this is an ideal replacement for your old or worn out existing model, so you can enjoy excellent braking power and control.Features: Use: Road Compatibility: SRAM Ultimate Level Includes: Brake shoe and pads Manufacturer Code: 00.5115.044.010Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM G2 Ultimate Disc Brake SetFeaturing a carbon fibre lever blade, this trail-ready mountain bike (MTB) hydraulic disc brake offers the perfect balance of stiffness, durability and low weight performance on your ride. SRAM has also kitted out this version with an anodised finish for additional protection against wear and corrosion, making it ideal for all-weather and trail conditions. Another highlight is its steel-backed organic brake pads, which ensure dependable braking as you weave your way from trail to trail. Coming complete with a wide range of technologies, this is a great choice of upgrade for smooth and reliable braking performance wherever your next trail adventure leads you.Every trail and every rider is unique. To meet the infinite variables SRAM created the G2: powerful, consistent, reliable. The brand obsessed over heat management, modulation, materials and design. They made lever-reach and contact points adjustable to fit every hand. And they tested the whole system to ensure it delivers confidence-inspiring performance and control, every ride.For the Ultimate, SRAM held nothing back. The brand's engineers sculpted the finest materials - titanium and carbon fibre - to make this its lightest four-piston brake ever. Power, modulation and lever feel set a new standard. Personalisation is quick and intuitive. And for performance - its test riders didn't dub it the "Mini-Code" for nothing.- More caliper stiffness and a revised pad compound with bite.- Pivot bearings for crisp lever feel and a fatigue-free ride.- SRAM's best power to weight ratio in a four-piston brake.Features: Lever Blade Material: Carbon Caliper Body Material: Aluminium Finish: Anodised Pad Type: Steel-backed Organic Use: Mountain Bike (MTB) Brake Type: Hydraulic Number of Pistons: 4 Caliper Mount Type: Direct mount DIR Recommended MMX Clamp (not included): Stainless bolt, blk clmp, Titanium bolt, blk clmp Rotor Compatibility: Front: 200mm; Rear: 180mm (rotors available separately) Single or Pair: Pair Weight: 238gTechnologies: Bleeding Edge: With this new caliper fluid circuitry, the bleed port has been moved to the bottom of the caliper, and all four piston bores can communicate. This way, during bleeding fluid naturally fills the caliper, resulting in an easier, more consistent bleed. Contact Point Adjustment: Some people like the instantaneous power of a short lever throw. Others prefer the feel of a longer throw. With Contact Point Adjust, you can pick the position you want your fingers to be in when your brakes are engaged. It's a quick and easy way to customize the feel of your brakes without having to move the pads. It's also a way to balance both brake levers to feel exactly the same. Lever Pivot Bearings: Precision sealed bearings at the lever pivot enhance the clean, crisp lever actuation and consistent, light, one-finger feel. Power Reserve Geometry: Your fingers pull in a straight line, but brake levers move in an arc. Bottom line: Your fingers typically want to slip off the ends of the levers as you pull. We designed all of our brakes with the industry's lowest X Factor (that's the distance from the center of the handlebar to the center of the lever's pivot). That reduces the lever's inward travel, creating an arc that's closer to your fingers' natural motion and more power is delivered to the brake lever. And, the cool part is, every SRAM and Avid brake lever has it. S4 Lightweight 4-Piston Caliper: The S4 Caliper features four Machined and Moly-coated aluminium pistons for consistent rollback and easy set-up, Heat shield insulation and Bleeding Edge porting and adapter technology for easy bleeds. SwingLink: Squeeze a SRAM brake lever and you notice it immediately. Less deadband. More positive engagement. A new cam system requires less lever throw to push the pads toward the rotor. That's great, but there's more to perfect braking performance than just power. You need control. Many brake systems minimize deadband—but at the cost of modulation. SwingLink solves that with its special cam shape. When the pads contact the rotor, the leverage rate curve is flat and smooth, avoiding that “on/off” brake feel. It's the perfect balance of power and precision. Timing Port Closure: A hydraulic brake's timing port is the connection between the reservoir and the lever cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port, which pressurizes the system. SRAM's timing port closure system features durable seals and an ultra-smooth cylinder bore finish producing dependable braking power and consistency. Manufacturer's Part Numbers: 00.5020.458.230 2X Black 1550mm 00.5020.457.210 2X Black 1450mmBuy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM Guide RE Disc Brake No ClampDesigned for the increased speeds, torque and power that's produced by electric bike (E-bike) motors, this hydraulic disc brake is ready for day-long adventures on your electric mountain bike (E-MTB). It features a hard-wearing aluminium lever blade construction, which makes it tough and dependable as you tackle demanding terrain conditions. SRAM has also equipped this model with a four-piston caliper for powerful and consistent braking performance, wherever your next takes you.E-MTB Hydraulic Disc BrakeGuide RE is SRAM's optimised braking solution for today's exciting category of E-MTBs, capable of handling the higher average speeds, more intense use and increased mass due to the presence of the motor and battery. It combines SRAM's proven Guide R lever assembly with a powerful four-piston caliper derived from the gravity-focused Code brakes. Guide RE provides real, usable on-trail control-optimal power and modulation mean speed can be controlled in all terrain and in all situations, both uphill and downhill.DirectLinkSRAM's DirectLink lever design produces a solid, positive feel the second you squeeze the lever to engage the brake. It offers a no-nonsense solution to give you precise control.Piggyback ReservoirThe brake fluid reservoir on SRAM's latest lever design is optimized for both performance and ease of use. The PiggyBack Reservoir offers a simple, failsafe way to manage brake fluid, and also allows for ambidextrous lever placement—so you can switch your levers on the handlebar and run them moto without hassle.Reach AdjustBrake lever fit and feel is a personal thing. Riders have individual positioning preferences, as well as unique hand sizes and finger lengths. Reach Adjust makes it easy to adjust your lever for maximum one-finger control for everyone.Timing Port ClosureA hydraulic brake's timing port is the connection between the reservoir and the lever cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port, which pressurises the system. SRAM's timing port closure system features durable seals and an ultra-smooth cylinder bore finish producing dependable braking power and consistency.Features: Lever Blade Material: Aluminium - stamped Use: Electric Mountain Bike (E-MTB) Brake Type: Hydraulic disc brake Bracket (Disc Brake): Direct Mount DIR Caliper: Four-piston caliper Pads: Sintered pads Rec MMX Clamp: Not Included Rotor/Clamp Included: No, available separately MatchMaker X compatible, Ambidextrous lever mount, Tool-free reach adjust Single or Pair: Single Weight: 415gManufacturer's Part Number: 00.5019.964.210Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM Guide R Disc Brake No ClampFully equipped for long days on your favourite mountain bike (MTB) routes, this hydraulic disc brake features a tough aluminium build for increased durability and strength. Whether you're into trail riding or cross country (XC) racing, this versatile model also comes kitted out with a four-piston caliper for powerful and consistent braking performance. Another highlight is its tool-less reach adjust technology, which means that you can easily fine-tune the distance between the lever blade and your handlebar for a more comfortable and controlled braking feel. This makes it a perfect choice of upgrade for matching your hand size as well as your riding style.Please Note: Handlebar clamps are not included with this model and will need to be purchased separately.Features: Lever Blade Material: Aluminium - stamped Clamp Material: Aluminium Hardware Material: Stainless Steel Use: Mountain Bike (MTB), Cross Country (XC) Brake Type: Hydraulic disc brake Caliper: 4-piston caliper Adjustments: Tool-free reach-adjust Rotor Included: No, available separately Single or Pair: Single Weight: 392gManufacturer's Part Number: 00.5020.493.250 BlackBuy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM G2 R Disc BrakeFeaturing a hard-wearing cast aluminium lever body and a forged aluminium caliper, this versatile hydraulic disc brake is capable of handling all the intensity that's associated with all-day epics in the mountains. SRAM has also equipped this version with tool-free reach adjustment, so you can easily tweak the distance between the lever and your handlebar for a more rider-tuned braking feel. Another highlight is its powerful organic brake pads that deliver an exceptional feel and bite as you weave between the trails at speed.The core of brake performance is consistency. Reliability. Trust. And with G2 R, SRAM focused on offering a premium value without compromising the heart of the operation. This brake gives riders the G2s famed “Mini-Code” power and a whole suite of SRAM standard features at an absolutely unbeatable value.- Powerful organic pads give riders both feel and bite.- Engineered for easy installation and maintenance.- Tool-free reach adjust for quick personalisation.Features: Lever Blade Material: Aluminium - stamped Caliper Body Material: Forged Aluminium Use: Mountain Bike (MTB) Brake Type: Hydraulic disc brake Pad Type: Steel-backed Organic Caliper: Four-piston caliper Rec MMX Clamp: No Included Rotor Included: No Single or Pair: Single Weight: 393gTechnologies: Reach Adjust: Brake lever fit and feel is a personal thing. Reach Adjust makes it easy to adjust your lever for maximum one-finger control for everyone, regardless of hand size. Power Reserve Geometry: Your fingers pull in a straight line, but brake levers move in an arc. Bottom line: Your fingers typically want to slip off the ends of the levers as you pull. We designed all of our brakes with the industry´s lowest X Factor (that´s the distance from the center of the handlebar to the center of the lever´s pivot). That reduces the lever´s inward travel, creating an arc that´s closer to your fingers´ natural motion and more power is delivered to the brake lever. Direct Link: SRAM's DirectLink lever design produces a solid, positive feel the second you squeeze the lever to engage the brake It offers a no-nonsense solution to give you precise control. Timing Port Closure: A hydraulic brake's timing port is the connection between the reservoir and the master cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port, which pressurizes the system. SRAM's new timing port closure system, features durable seals and an ultra-smooth cylinder bore finish producing dependable braking power and consistency. S4 Lightweight 4 Piston Caliper: The S4 caliper features four machined and moly-coated aluminium pistons for consistent rollback and easy set-up, heat shield insulation and Bleeding Edge porting and adaptor technology for easy bleeds.Manufacturer's Part Number: 00.5020.477.080Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.