Flexible and Durable Mudguard Made from polypropylene, the Proguard Max Mudguard is excellent in cold weather and can withstand impact due to its innate flexibility and durability. Maximum Protection RapidRacerProducts offers the best protection in the world, this version is 68mm longer at the rear. No other mudguard offers more protection. Indent A mudguard tracking close to the tyre can offer great mud and spray protection but often at the cost of mud clogging and slowing the rider down, a mudguard that sits high off the tyre is conversely going to offer less protection so a compromise is needed. Long Front The front has been made longer - 21mm longer - than some available offerings as this is an area that can significantly improve the protection of the face and eyes when riding at high speed. The turn down at the front deflects the spray downwards without clogging with mud which causes blockages. Snap-off Hole Covers Hole covers have been added to reduce the amount of mud that can get through unused holes. Once you have chosen which holes you want to use for fitting, you just use a screw driver to push the cover out leaving it clear for the zip tie. The 24 holes allow you to fit the mudguard to every type of conventional fork including Boost forks (except reverse arch), this allows you to customise your fit. Rear Flick The rear flick was designed to simply offer more protection without adding extra length, it prevents more mud and spray from flying up the side of the frame especially when the wheel is turned. Seal Guard RapidRacerProducts' widely acclaimed Seal Guard has made it to the Proguard Max Mudguard as a means of offering greater protection for your seals from high velocity mud and spray, the Seal Guard section also provides additional strength and rigidity to the rear reducing flex.
Manufactured in light 6061 alloy, double butted cold drawn, the Deda Zero1 RHM model matches up perfectly with the new Zero1 stem, giving you the ultimate sensation of comfort and ride style with affordability. The Deda Zero1 RHM handlebar is the classic handlebar by definition, a modern RHM geometry combined with round top section. The handlebar is manufactured in light alloy 6061, double butted cold drawn. It's the perfect combination with the Zero1 stem. Please Note: The width options on these bars are measured outside to outside (centre of drop to centre of drop).
Made from double-knit material for strength and added warmth, the Great Wave Sport Cut Jersey from Primal is designed for the road. It’s a lightweight jersey, but one that wicks moisture away from your body, making the striking wave print design oddly appropriate. The combination of a sport fit and 2-way stretch for the riding position further adds to the comfort, while the addition of 3 rear cargo pockets and a full length hidden zipper allow it to be practical at the same time. A full-bodied package.
Keep up your zest in the saddle this winter season thanks to the moisture-wicking Primal Orange You Glad socks.
Natural Pedalling Position with Secure Engagement With six degrees of float allowing a more natural pedalling position, LifeLine Road Cleats provide a precise and secure engagement for confidence in the sprints. Simple to disengage from the pedal and made from a highly durable plastic to keep wear to a minimum, these cleats include all necessary bolts and inserts needed to fit them to your shoes.
The Deda Zero RHM handlebar features a black anodised finish with grey decals. Adopting Deda's rapid hand movement (RHM) drop design, this advanced road bar enables quick and natural hand position changes so you can remain comfortable and in control on the fastest and longest rides.
The LifeLine 18 Piece Bike Tool Kit is perfect for the home mechanic or a race weekends away, the all in 1 kit provides you with tools you need to get rolling again. The tools are all kept safe in a durable plastic box with protective internal foam separating the two halves. LifeLine Bike Tool Kit - 18 Piece Includes: Workshop Tyre Levers Chain Whip Shimano Compatible External BB Spanner Pedal Spanner 15mm Box Wrench with 14/15mm socket end Shimano Style Hollow Tech 2 Tensioning Tool, features unique twist top for extra grip Ball Ended Allen Keys (2, 2.5, 4, 5, 6) Flat Bladed Screwdriver Philips Head Screwdriver 2 double ended Cone Spanners (13, 14, 15, 16mm) Chainring Bolt Tool Puncture Repair Kit Spoke Key 3.2, 3.3, 3.5 Crank Extractor Cassette Tool Splined BB Tool Torx L Wrench Chain breaker Tool, with replacement pin
The LifeLine Lightweight Carbon Water Bottle Cage shape allows for easy access from either side, whilst the bottle retention system features a small rubber gripper to ensure your bottle stays securely in place.
Look has optimised the pedal shape and size to obtain the perfect balance between the contact surface area and weight. This pedal features an exceptional, modern and performance-orientated design that provides superb comfort and as it is equipped with advanced weather seals; it is extremely durable and reliable. To expand the usage of the Look X-Track pedals further, they have fully adjustable cleat tension, enabling you to fine-tune the contact and release feel and to set them up to suit how you like to ride. Please Note: These pedals come with Look SPD-style cleats to install onto your SPD-compatible cycling shoes. However, if you wish to use them with shoes that have Shimano SPD cleats installed they will be compatible with these too.
The Licence Carbon Bars from NS Bikes provides exceptionally high-performance and an extremely safe and reliable structure for precise handling on every ride. Boasting a carbon fibre construction that's ultra-lightweight and also works as the perfect balance between stiffness and flexibility to ensure your steering is accurate while remaining comfortable on longer and more demanding descents. You'll notice just how stable and confidence inspiring these bars are in harsher terrain riding conditions thanks to their internally optimised construction with additional layering in stress sections to maximise the feel of the bars. These are the ideal boost for taking your off-road riding performance to the max. Please Note: On the options on our page, the 31.8 or 35 numbers relate to the stem clamp area size in millimetres, the 820mm relates to the width.
The LifeLine Anti-Pollution Mask's filter offers a 95% filtering efficiency with an active carbon layer to help filter the small negative particles from the air. With 2 exhalation valves breathing becomes easier and reduces hot air/water vapour/carbon dioxide build up.
Whether you're riding for the fun of it or pushing for the top spot on the podium, the Look Keo 2 Max Carbon pedals give you the best of both worlds with a slim profile and incredible support from the large contact area that translates into superior comfort and maximum power transfer. Technologies: Optimised Surface Contact: The Look Keo 2 Max Carbon pedal’s surface area has substantial symbolic importance. It is part of the brand’s identity and acts as an indelible signature on the product. The contact surface of these revised Keo 2 Max Carbon pedals preserves the strong lines on which its history was built. Its width has been increased to 60 mm to provide a larger platform and improved foot stability during pedalling. This creates a feeling of unrivalled comfort not found in any other pedal. Look also sought to optimise power transfer thanks to its larger 500 mm² of usable surface (+25% increase). The shape of the stainless-steel plate has been revised to match that of the cleat and to keep, regardless of the position of your foot (depending upon the angular float you use), the same amount of contact for consistent performance. Increasing the pedal’s usable contact surface, without any additional weight gain, improves the power to weight ratio, making the product even better and allowing you to perform at your best. Improved Spindle Profile: The spindle profile of the Keo 2 Max Carbon pedals has also been optimised. Built around an oversized CrMo+ steel axle, it is composed of an axle with an inner ball bearing and a needle roller bearing, located under the contact surface, to handle the load and distribute it optimally. A new component has been added between these two bearings. A serrated washer, previously used to hold the needle roller bearing in place, has been replaced with a conical spacer. This technical solution reduces friction, increases fluidity, and by consequence, decreases the geometrical tolerances of the pedal body and play. The sole purpose of the sum of these improvements has been to guarantee you irreproachable reliability. Alternative Cleat Float Options: Black Cleats: 0 degrees; Red Cleats: 9 degrees (both alternative versions sold separately)