Compatible with Tru-Pro and FT-1, these adapters allow Thru Axle hubs/wheels to be used with these wheel truing jigs. Both 20mm and 15mm sizes.
9mm or 15mm end caps for current generation crankbrother Cobalt front hubs.
Includes front and rear wheel locking skewers and coded key. Prevents removal of your wheels from your frame. Protects your wheels for a fraction of their replacement cost.Unlike a traditional lock, with Pinhead you can now protect specific components on your bike from theft. The unique Pinhead key system means that, unlike competitor locks of this type, they cannot be removed with a simple screwdriver. The Convex technology on Pinhead wheel locks protects them from removal by hammer, pliers, picks, universal socket tools, grinders and bolt cutters.Once installed, the quick release wheel locks remain permanently on your bike, even when you ride. When you need to remove your wheels for servicing, your Pinhead key lets you do this quickly and easily.Pinhead locks use a special coded key that comes with each lockset. The key is ergonomically engineered to install and tighten your locks, and also serves as a bottle opener. Each key is different, and comes engraved with a nine-digit code so it can be replaced if lost. With your key code, matching locks can be ordered to protect your other components or other bikes.Make sure to register your key code at pinheadlocks.com so that if you key is lost, a replacement key can be made for you.FEATURES:Protection for: Both Wheels,Replaces your existing 9mm quick release skewers,Easy, one-time installation,Skewer Length: 125mm (front) / 168mm (rear),Skewer installed weight: 33g (front) / 37g (rear),Materials: Precision forged Cro-Mo steel and aircraft grade aluminium alloy,Online lost key replacement available for keys registered with Pinhead,Protected by a lifetime warranty.PACK INCLUDES:1 x Front Skewer1 x Rear Skewer2 x Lock Nuts2 x Washers2 x POG Security Washers1 x Unique Pinhead Key for quick release locks
Customise the look of your BMX with these top value wheels. Hand built in Nottingham these Anodised Red wheels are built using a black, 48 hole, 9 Tooth Driver hub from Joytech with 14mm axle, a ALEX J303 single wall rim and black spokes.
Genuine replacement freehub body for Miche MTB wheels.3 pawls and spring included. Dirt seal included.
DMR Pro Wheels :All our wheels are designed to be tough and good value, they are available individually allowing a mix and match approach. The range gives a choice of wheels for dirt jump, street riding, downhill or free-ride use..,Build Quality And Spare PartsAll the wheels include DMR rim tape (in red and black of course!) and are built to the same high quality and hand finished to high standard; stress relieved and re-tensioned to ensure a durable tough wheel. The black rims and spokes with deep red anodized hubs look the business too. We carry all the service parts as spares so you can be confident these wheels will keep rolling..,Front32 hole | Cross 3 | 990 grams.,20mm through axle hub, with international standard (6 bolt) disc brake mounts in a choice of red or black with matching spoke nipples..,Laced onto a DMR Thret Rim using black plain gauge spokes..,Rim tape included..,9mm conversion kit available..,REAR - 9 Speed32 hole | Cross 3 | 1290 grams.,10/135mm axle hub with fixing bolts to secure your wheel into your frame (quick release could also be used (not included), with international standard (6 bolt) disc brake mounts and a 9 speed freehub in a choice of red or black with matching spoke nipples..,Laced onto a DMR Thret Rim using black plain gauge spokes..,Rim tape included..,REAR - 1 to 6 Speed32 hole | Cross 3 | 1340 grams.,10/135mm nutted axle hub with international standard (6 bolt) disc brake mounts and a 1 to 6 speed freehub in a choice of red or black with matching spoke nipples. .,Laced onto a DMR Thret Rim using black plain gauge spokes..,Rim tape included..,NB: weight indicated on The rim is to illustrated the weight of the The rim only and does not describe the weight of the fully built 26 Inch DMR Pro wheels..,Single speed spacer kit and cassette shown in images sold separately..,
The most versatile and serviceable hubs on the planet are now available with centre-lockKey Features:Specifically designed for road use with reduced drag ratchet mechanism.2 pawl ratchet with 44-point engagement (8 deg).Machined from forged 2014 T6 aluminium billet.Stainless Steel Bearings.Centre lock disc spline.Available in 135mm & 142mm widths.Available in 11 speed Shimano and Campagnolo.Aluminium or steel Freehub.Conversions available in QR and 12mm.Weight: 272g (32 hole 142mm).
Tame Wind, Scale MountainsZipp’s 202 Tubular is a versatile wheelset that climbs like a mountain goat and descends like an eagle. Its confirmation comes in the form of numerous Grand Tour stage wins, including AG2R LA MONDIALE’s Alexis Vuillermoz and Romain Bardet in the 2015 Tour de France. Now, with the 77/177 hubset, this climber’s wheelset is even better.To get to the base of the climb, the 202’s 32 mm toroidal profile was developed in the wind tunnel to roll on the flats as efficiently as many 45- to 50mm-deep rims. When the tarmac tilts upward, with superior stiffness and weight of only 1,180 grams, the 202 flies. Beyond the summit, the 202’s high lateral stiffness delivers precise handling on tricky descents and crisp accelerations to finish off the competition.While the 202 Tubular is renowned for its prowess on steep terrain, it’s pro proven for all kinds of speed needs and deeds. Zipp pro triathlete Jan Frodeno won gold in Beijing riding the 202. This wheelset even was ridden to fourth place at Paris-Roubaix. Now the inclusion of the 77/177 hubset gives best-in-class durability and improved bearing protection with no pre-load adjustment needed to raise the 202 to an even higher level: Optimized flange geometry and spoke hole attachment pattern with Sapim® CX-Ray spokes to optimize torsional and lateral stiffness without sacrificing weight or robustness., Includes newly designed quick-release skewers with a wider more ergonomic handle to give more leverage for opening and closing. When closed, lever contours neatly with the frame., New robust hub platform with distinctive graphics., For those looking for a wider gear range, or tackling especially extreme terrain, a XD driver body for 177 is sold separately and easily installed to allow for more cassette options including a 10-42. â�¨The hubset is designed to swap driver bodies without re-dishing wheel.,Max recommended rider weight 225lbs.Available in two decal options, the stealthy Matte Black or the distinctive Matte White decals. Each 202 Tubular wheel comes with Tangente Platinum Pro Evo brake pads, Zipp Integrated Valve Extender with valve-core wrench, and quick release. Weight 670g Hub Used 177 Rim Depth 32.0mm Brake Track Width (center) 22.56mm Max Width 22.61mm Spokes Sapim® CX-Ray Spoke Count 24 Spoke Length Non-Drive 284mm Spoke Pattern Non-Drive 2 cross Spoke Pattern Drive 2 cross Spoke Length Drive 284mm 11-speed compatible hub Yes Track Adaptable No Dimpled Surface Yes Nipples Sapim® External Nipples Yes
Mavic's mid level all road rimFeaturing high quality 6106 alloy and double eyelets, this 25 mm wide rim is perfectly adapted to today's trekkers and tourers. It is strong, durable and allows the use of tyres up to 50 mm.AVAILABLE COLORS/VERSIONSBlack,Silver.RIM PROFILEA319 07.TECHNOLOGIESUB Control.FILTERSTyre type: clincher,Drilling: 32,Drilling: 36,Range level: Better.OEM AVAILABILITYPlace: from France.FEATURES6106 aluminum alloy,Traditional drilling,UB Control,Double Eyelet,Pinned,Clincher.DIMENSIONSETRTO size 29": 622 x 19,Recommended tyre widths: 28 to 47 mm,Recommended nipple length: 12 mm,Recommended rim tape: 622 x 20 x 0.6,Valve hole diameter: 8.5 mm, supplied with valve adapter.
Key Features:Double wall eyeleted Mach1 Neuro rim, Formula 6 bolt 15mm disc hub,Black spokes.Please Note, front and rear wheel are sold separately, this image is for display purposes.
Includes front and rear wheel locking skewers, seatpost lock, seat collar, and coded key.Unlike a traditional lock, with Pinhead you can now protect specific components on your bike from theft. The unique Pinhead key system means that, unlike competitor locks of this type, they cannot be removed with a simple screwdriver. The Convex technology on Pinhead locks protects them from removal by hammer, pliers, picks, universal socket tools, grinders and bolt cutters.Once installed, the quick release wheel locks remain permanently on your bike, even when you ride. When you need to remove your wheels for servicing, your Pinhead key lets you do this quickly and easily. The seatpost lock also remains on your bike once installed, locking the seatpost to the frame. When you need to adjust your saddle height, your Pinhead key lets you do this quickly and easily.Pinhead locks use a special coded key that comes with each lockset. The key is ergonomically engineered to install and tighten your locks, and also serves as a bottle opener. Each key is different, and comes engraved with a nine-digit code so it can be replaced if lost. With your key code, matching locks can be ordered to protect your other components or other bikes.Make sure to register your key code at pinheadlocks.com so that if your key is lost, a replacement key can be made for you.FEATURES:Protection for: Both Wheels and Seatpost,Replaces your existing quick release skewers and seatpost clamp,Easy, one-time installation,One key to lock and unlock your wheels or seatpost,Skewer Length: 125mm (front) / 168mm (rear),Skewer installed weight: 33g (front) / 37g (rear),Seatpost Lock installed weight: 41g,Materials: Precision forged Cro-Mo steel and aircraft grade aluminium alloy,Online lost key replacement available for keys registered with Pinhead,Protected by a lifetime warranty.PACK INCLUDES:1 x Front Skewer1 x Rear Skewer3 x Lock Nuts3 x Washers2 x POG Security Washers for the skewers1 x Rubber cap for the seatpost lock1 x Shim to fit all seatposts (from 28.6mm OD to 31.8mm OD)1 x Unique Pinhead Key for quick release locks and seatpost locks
Orange Seal's comprehensive Tubeless Conversion Kit includes everything that you need to convert your wheels to a tubeless system.Kit contains rim tape, two 48mm removable valve core (RVC) valves, RVC tool and 8oz bottle of our sealant with injector..